A few questions about getting DSL

Hi, my home has been out of range for DSL and we've been patiently waiting for years for the day to come when it's available, but it doesnt look like it'll be happening soon. We have a small business we run out of the house and have been paying a fortune a month for those mobile cellular internet cards (a little faster than dial-up) and figured we'd save money eventually if we could just pay verizon engineers to run another base station or repeater to extend the line to reach us.
My question is would this even be possible, and if so how much do you think it would cost, just an estimate, our neighbors about a mile away (through the power lines) have it. We've pretty much exhausted all other options and need high speed for our growing business.
Thanks

ntb1985 wrote:
Hi, my home has been out of range for DSL and we've been patiently waiting for years for the day to come when it's available, but it doesnt look like it'll be happening soon.
Many years ago, engineers finally got the attention of top management. 3G cell phone now do more than copper land lines. That created enough panic among bean counters to finally let them install FIOS. Copper is now dying. Anything in copper that might become available is only because it always existed. Your only upgrade is now FIOS.
Meanwhile, competition also exists. For example, internet via Direct TV. Also coming is Wi-Max. Intel has been at this for about ten years. So it should be coming soon. Wi-Max is WiFi but in a wider radius. Whereas WiFi may be 300 feet; Wi-Max is in the entire mobile phone cell.
Typical reason for no DSL is a wire that is too long. However some better radio transceivers (DSL is radio wave communication) have made a minor increase in DSL's range. Have you checked the availability of that new option?

Similar Messages

Few questions about getting rid of unwanted items

OK, i should have done this from the start but I didn't do a fresh install of my OS to get rid of language support, etc....now I am into using my blackbook and have all my camino and safari bookmarks, etc the way I like it.....is there a way to save these preferences on an external HD and do a clean install of OS? If this is possible it is the method I prefer.
OR
Should I just remove what I don't want manually instead? does monolingual work with intel macbooks? do I just trash printer prefs into the trash? How do I make sure my officetrial also gets rid of the 'files' hanging around? (i read a post where someone trahsed MS office and still had files haning around)...
Basically if I stay away from my 'users/library' folder I will be safe? I can trash applications that don't want and be safe?
thanks all

Here is what about monolingual:
Monolingual is a program that can remove other languages that installed by default by OS X installer that you don't want or use. It also offer to trim down the Input Menu and Architecture.
http://monolingual.sourceforge.net/
Here is the tips:
1. Since you only run this once, you can run it directly from virtual drive that mounted after you download the .dmg file by simply double click on its icon.
2. Uncheck the language you want to keep, for I uncheck English, British English and US English to keep.
3. Never play with the input menu for it is not worth of the space you save comparing to the risk you will lost control to your keyboard and have to re-install OS X from the scratch.
4. Never remove and play with architecture option as well for the space is also not worth, and you might lose rosetta ability to run non universal programs.
Good Luck.

Have a few questions about iPad before I get one

I have a few questions about getting an ipad before I committ to get one.
I have about 24 gb of itunes purchases in my itunes library, I am thinking of getting the 64 gb ipad. However, after you purchase the 64 gb, it will not truly be 64 gb,
1) how much actual storage space would I have on a 64 gb ipad accounting for the os? On my macbook now I have a 164 gb hard drive but only access to about 148 gb for example.
2) Would I be able to store the 24 gb of itunes purchases in icloud? How would I do that? Would I keep needing to go into the Purchase History tab in the ITunes store and download the song when I want to listen to it? My concern with this is that the item will no longer be "available in the Itunes store" and I will lose access to my music I purchased?
I would like to ditch the laptop and just have the ipad as my computer but want to know about these questions I have first.
3) Can ipad and iphone now be charged without needing a laptop? Per last year's June 2011 conference when Lion and ICloud were announced, it was stated in Fall 2011 with iOS5 that people could get ipads and iphones and charge them without needing a laptop for syncing?

1. About 57 on mine
2. Subscribe to iTunes Match at a cost of about $25 per year - 25000 song limit I think
http://www.apple.com/icloud/features/
3. The iPad comes with a power adapter that plugs into a wall socket and that is the recommended way to charge it anyway. - not by using a computer
http://www.apple.com/batteries/ipad.html
You do not absolutely need a computer in order to use an iPad but you have to do more research to figure out if it will fit your needs that way.

A few questions about Patone colors

I have a few questions about patone colors since this is the first time I use them. I want to use them to create a letterhead and business cards in two colors.
1)
I do understand that the uncoated is more washed out than the coated patone colors. I heard that this is because the way paper absorbs the inkt. This is why the same inkt results in different colors on different paper (right?). My question is why is the patone uncoated black so much different than normal black (c=0 m=0 y=0 k=100) or rich black:
When I print a normal document with cmyk, I can get pretty dark black colors. Why is it that I cannot have that dark black color with patone colors? Even text documents printed on a cheap printer can get a darker color than the Patone color. It just looks way too grey for me.
2) For a first mockup, I want to print the patone colors as cmyk (since I put like 10 different colors on a page for fast comparison). I know that these cmyk colors differ from the patone colors and that I cannot get a 100% representation. But is there a way to convert patone to cmyk values?
I hope that some of you can help me out with my questions.
Thanks.

You can get Pantone's CMYK tints in Illustrator, (Swatches Panel > Open Swatch Library > Color Books > PANTONE+ Color Bridge Coated or Uncoated) but in my view, what's the point? If you're printing to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use Pantone's CMYK so-called "equivalents."
Pantone colors are all mixed pigmented inks, many of which fluoresce beyond the gamut limits of RGB and especially CMYK. The original Pantone Matching System (PMS) was created for the printing industry. It outlined pigmented ink formulations for each of its colors.
Most digital printers (laser or inkjet) use CMYK. The CMYK color gamut is MUCH SMALLER than what many mixed inks, printed on either coated or uncoated papers can deliver. When you specify non-coated Pantone ink in AI, according to Pantone's conversion tables, AI tries to "approximate" what that color will look like on an uncoated sheet, using CMYK. -- In my opinion, this has little relevance to real-world conditions, and is to be avoided in most situations.
If your project is going to be printed on a printing press with spot Pantone inks, then by all means, use Pantone colors. But don't trust the screen colors; rather get a Pantone swatch book and look at the actual inks on both coated and uncoated papers, according to the stock you will use on the press.
With the printing industry rapidly dwindling in favor of the web and inkjet printers, Pantone has attempted to extend its relevance beyond the pull-date by publishing (in books and in software alliances, with such as Adobe) its old PMS inks, and their supposed LAB and CMYK equivalents. I say "supposed" because again, RGB monitors and CMYK inks can never be literally equivalent to many Pantone inks. But if you're going to print your project on a printing press, Pantone inks are still very relevant as "spot colors."
I also set my AI Preferences > Appearance of Black to both Display All Blacks Accurately, and Output All Blacks Accurately. The only exception to this might be when printing on a digital printer, where there should be no registration issues.
Rich black in AI is a screen phenomenon, unless in Prefs > Appearance of Black, you also specify "Output All Inks As Rich Black," -- something I would NEVER do if outputting for an actual printing press. I always set my blacks in AI to "Output All Blacks Acurately" when outputting for a press. If you fail to do this, then on the press you will see any minor registration problems, with C, M, and Y peeking out, especially around black type. UGH!
Good luck! :+)

Few questions about iPhone 4S

Hi,
Recently I got an iPhone 4S, it is my first new phone in a long time, before this I had an old nokia, so I just have a few questions about it.
I havve read a alot of horror stories about the 4S battery life, mine seems ok, here is what I would like to know
1) How long should a healthy battery last?
2) how long should it take to charge to 100% from 1 or 2%?
On my daily commute I use listen it to music and sometimes user twiiter/facebook. I also get alerted of emails when they come in. So far it has just about lasted just about two days maybe before I had to recharge. Is this about right? As stated above I am coming from an old nokia, which is very dated now but the battery lasted almost a week before I had to charge, so having to charge my phone this often is new to me. My iPhone is really great and I just don't want any problems. I have turned off all extras that I don't need.
BTW are the iPhone 4S battery issues a software or hardware issue?
Thanks

I attempted to read your post, but in amongst all the random, unrelated waffling, I couldn't actually find exactly what your iPhone related question for this "Using iPhone" forum was.
Would you like to clarify? Concisely.

Few questions about mac pro before buying

Hello all!
I may be buying a mac pro in a month or so and have a few questions about it.
1. ) Any one know when Apple may release the latest mac pro? Don't wanna buy some thing that'll be significantly obsolete in a few days
2. ) Is it possible to use SATA optical drives internally? I have a SATA blu ray drive I'd like to take from my PC, if that's possible.
3. ) Is it possible to get a graphics cards better than the 8800 GT for video games? (For use in OS X)
4. ) Finally, is there a significant performance difference between Apple's seemingly super expensive RAM and 3rd party RAM? (Other than the heat syncs)
Thanks for any replies.

1. We have no idea when Apple will release any product until it's released. This is a user-to-user site so we have no more information about future products than you do.
2. Yes, it's possible. There are two additional SATA ports on the motherboard.
3. The only graphic cards are those provided by Apple when you order the computer as well as the non-Apple supplied ATI HD-3870 Mac/PC card. The 8800 and 3870 have close performance specs. You can find some benchmarks at Bare Feats.
4. There's no difference between the RAM Apple installs and what you can purchase on the open market. As long as the RAM meets the required specifications and has the requisite heat sink it will work just fine.

Few questions about Calendar / SimpleDateFormat classes

Hi.
I have few questions about Calendar class:
1. How can I get only date representation (without the time)?
after doing:
Calendar cal = Calendar.getInstance();
I tried to clear unecessary fields:
cal.clear(Calendar.SECOND);
cal.clear(Calendar.MINUTE);
cal.clear(Calendar.HOUR_OF_DAY);
But after printing the time, it seems that the HOUR was not cleared:
SimpleDateFormat sdf1 = new SimpleDateFormat("dd/MM/yyyy HH:mm:ss");
System.out.println(sdf1.format(cal.getTime()));
---> 03/11/2004 17:00:00
Am I missing somthing?
2. I want to make sure that two different formats couldn't be compared. i.e., if I'll try to parse one String according to different format -- ParseException will be thrown.
String date = "19/04/2004 13:06:10";
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
Date dateObj = sdf.parse(date);
However, even though that formats are different, no exception is thrown and the return Date is 19/04/2004 00:00:00.
How can I cause to exception to be thrown if formats are not identical?
Thanks in advanced

The Calendar class has a few of what Microsoft would call 'features'. :^)
To clear the time, call:
calendar.set(calendar.get(Calendar.YEAR), calendar.get(Calendar.MONTH), calendar.get(Calendar.DAY), 0, 0, 0);
If you want 'pessimistic' rather than 'optimistic' date parsing, you have two options:
1) Call calendar.setLenient(false);
See if that is strict enough for your needs, otherwise:
2) Write code to ensure a stricter parsing of the string passed in. For example, you could very simply check the length of the string to determine if time data is also present.
When parsing, a string like '02/29/02' would parse to the date '03/01/02'. Setting lenient to false may fix this, but the surest way is to do some testing and then make the parsing more pessimistic where it suits your needs.
- Saish
"My karma ran over your dogma." - Anon

Few questions about cs6

Hi
i have few questions about cs6
is there a way to let the ruler and straighten like cs5 ? i gave a look to my friend cs6 and cs6 ruler and straighten leave transparent image around the corner
and is there a way to set for each adjustament layer a size ? for example i like a big curve window but for example have a smaller level windows
thanks
cheers

mantralightroom wrote:
nope
The feature is there, where Christoph described it, though I would have liked it if they'd left an option for the Ruler Tool button to allow people to add "and crop" as well. But Adobe have confirmed they moved it out of there on purpose, presumably because new users would expect to crop their image using the Crop Tool, not the Ruler Tool.
mantralightroom wrote:
i would like to know if i can store the size of each dialog window
You MUST be talking about the Properties panel, where adjustment layer info is shown, because the dialogs you get when you do things like Image - Adjust - Levels or Image - Adjust - Curves is not resizeable in any way I can see. At least not on a PC.
No, there's no special option that allows dialog sizes to be saved separately. It's just one panel, and the size of the panel itself defines the size of the contents up to each of their max sizes.
-Noel

Few questions about upgrading database

Hi everyone,
greetings of the day
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,
2.I think we need to create tablespaces ,do we need to create users as well
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than creating a new sysaux tablespace
4.How come we get consistent export
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the database
2.How can we move the files to the new location
3.Can we change db_name of the database
4.Can we use the old database as well
In manual upgration using catupgrd scripts
1.Can we rename the db_name
2.can we use old database as well
3.how to move the database files to the new location
4.can we perform this kind of upgrade on a different server
5.when we startup upgrade in the new home ,how it identifies the old database in-order to upgrade the old one
Thanks

udayjampani wrote:
Hi everyone,
greetings of the day
Pl post details of source and target database versions, along with your OS details.
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,Yes.
2.I think we need to create tablespaces ,do we need to create users as wellYou can create users, but it is not necessary. You need to pre-create tablespaces only if their characteristics/locations on the target are different than on the source.
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than thisNot that I am aware of - see the steps in the Upgrade Guide - http://docs.oracle.com/cd/B19306_01/server.102/b14238/expimp.htm
4.How come we get consistent export wetherEnsure the database is started in restricted mode, so users will not be able to access the database during the export.
>
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the databaseNo - DBUA will do this automatically for you.
2.How can we move the files to the new locationYou can after the upgrade move the datafiles to wherever you want - use the ALTER DATABASE RENAME DATAFILE (http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_1004.htm#i2082829) command.
3.Can we change db_name of the databaseI do not believe this is possible with DBUA.
4.Can we use the old database as wellNo - the database will be upgraded by DBUA - there is no "old" database.
>
>
In manual upgration using catupgrd scripts
1.Can we rename the db_nameYes.
2.can we use old database as wellNo - the scripts will upgrade the database - there is no "old" database.
3.how to move the database files to the new locationSee above.
4.can we perform this kind of upgrade on a different serverPl elaborate on what you mean by this. You can copy the existing database to a different server (assuming compatible OS) and upgrade it there.
>
>
ThanksHTH
Srini

Few questions about apex + epg and cookie blocked by IE6

Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/

I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer?

A few questions about using PS3 with 27" iMac display...

Hey people, I had a few questions about how I could possibly get my ps3 connected to the iMac's 27" screen. First of all, could you guys list some adapters that would be able to convert the HDMI to Mini displayport? That would be great. The only one I know of is that Dr. Bott Digital Video link.
Okay secondly, I was wondering if I do get the the ps3 connected with the iMac's display with an adapter to convert HDMI to mini DisplayPort, would it be in HD? Would I be able to play ps3 games or watch blu-ray movies in 1080p HD format?
Thanks!

Welcome to the Apple Discussions!
This has been asked a number of times here since the intro of the 27" iMac. The answer is very expensive US$149 or more converters and sometimes even more expensive to maintain the resolutions that you seek.
http://lowendmac.com/ed/bashur/09db/dvi-to-mini-displayport.html
Dah•veed

A few questions about how ZPM works.

We have patch management (in ZCM 11.2.2), but honestly don't use it much. I have a few questions about how it works that might make me use it more, if I understand it more.
If I deploy a patch (or a set of patches), it creates a bundle for that deployment. That bundle seems to include actions that deploy the actual patch bundles (correct?). Do I have to recreate a new deployment bundle every time I want to push a new patch? i.e. If I push a Java update, and a month later, a new one comes out, do I build out a new bundle with the new patch in it, or do I modify the old one?
Once the patch is deployed, can I safely delete that deployment bundle, or should they just pile up?
Is there a way to "auto-approve" patches? Lets say I always want a group of machines to have the latest Adobe Flash Player patches. Can I set up ZPM to automatically cache and push the latest patches for a specific product, or do I have to manually remediate each patch? (I'm thinking of how MS's WSUS does "auto-approval")
I see most packages aren't cached in list, but occasionally, a patch is cached without me touching it. Why? Can I change what gets automatically cached?
Thanks for any help/answers you can provide.
-Adam

Originally Posted by adrockk
We have patch management (in ZCM 11.2.2), but honestly don't use it much. I have a few questions about how it works that might make me use it more, if I understand it more.
If I deploy a patch (or a set of patches), it creates a bundle for that deployment. That bundle seems to include actions that deploy the actual patch bundles (correct?). Do I have to recreate a new deployment bundle every time I want to push a new patch? i.e. If I push a Java update, and a month later, a new one comes out, do I build out a new bundle with the new patch in it, or do I modify the old one?
Once the patch is deployed, can I safely delete that deployment bundle, or should they just pile up?
Is there a way to "auto-approve" patches? Lets say I always want a group of machines to have the latest Adobe Flash Player patches. Can I set up ZPM to automatically cache and push the latest patches for a specific product, or do I have to manually remediate each patch? (I'm thinking of how MS's WSUS does "auto-approval")
I see most packages aren't cached in list, but occasionally, a patch is cached without me touching it. Why? Can I change what gets automatically cached?
Thanks for any help/answers you can provide.
-Adam
For #1, (assuming you're not using baselines), you would check the new version of the patch (vulnerability) and do a new deployment.
#2 - once you're satisified that the machines are deployed (or the best to your ability) you can delete the DEPLOYMENT package. It doesn't delete the actual vulnerability bundles to my knowledge. That's why it's a good idea to name your bundle deployments with something meaningful, IMO (and maybe include a nice desription).
#3 - currently I don't believe this is possible. I know you can probably configure it to auto-download the patches, but not auto-deploy everything. Given the propensity for software to wreck other things (hello MS .NET patches), this is probably not a good idea. At least I'd never auto-download and auto-deploy any patches without testing them first, and certainly take my servers a little more cautiously than my workstations.
#4 - I think you can configure what's cached, but I could be wrong.
I know there's a lot of improvements coming in the pipeline, and it doesn't hurt to "vote" for your enhancements via the enhancement system (more work for Shaun--haha)
--Kevin

Few questions about Spotlight searches in Leopard

I have a few questions about Spotlight searches in the menu bar & Finder in Leopard:
1. When doing a search in the Finder window how do I get back the grouped items view? (Docs grouped together, bookmarks grouped together etc. Same as in Tiger).
2. How do I set Spotlight searches in Finder to always default to search by 'File Name' instead of 'Contents' & in the folder I'm in rather than 'This Mac'?
3. In the Spotlight menu bar results how do I disable dictionary meaning for things I type in there?

Jono H
Can't answer them all:
1. Sort on 'Kind' - click the Kind header
2. If you're in a Folder and want to do a filename search, don't use spotlight, just start to type the name... So, if you're in Applications, just type iwo and you'll get your iWork...
3. ... I have no idea
Regards
TD

A few questions about the ETF

Hello, I have Verizon Home Phone Connect and had a few questions about canceling the service.
1. When I cancel the service will I have to pay the ETF right then and there? Or will I get a bill for it?
2. After paying the ETF will I have to return the device or can I keep it?
3. Once I have paid the ETF will I receive an invoice (or receipt) as proof that I have paid?
4. Will canceling affect my credit negatively?

1, You will get a bill for the ETF as well as the final month of service.
2. You can keep the device as long as you are past the initial 14 day term. If you purchased from third party retailer, that retailer may have additional conditions. Check your paperwork.
3. Yes. The same as any other payment you make.
4. No, as long as you pay in full all that you owe.
http://www.verizonwireless.com/b2c/support/customer-agreement
WHAT HAPPENS IF MY POSTPAY SERVICE IS CANCELED BEFORE THE END OF MY CONTRACT TERM?
If you're signing up for Postpay Service, you're agreeing to subscribe to a line of Service either on a month–to–month basis or for a minimum contract term, as shown on your receipt or order confirmation. (If your Service is suspended without billing, that time doesn't count toward completing your contract term.) Once you've completed your contract term, you'll automatically become a customer on a month–to–month basis for that line of Service. If you cancel a line of Service, or if we cancel it for good cause, during its contract term, you'll have to pay an early termination fee. If your contract term results from your purchase of an advanced device, your early termination fee will be $350 minus $10 for each full month of your contract term that you complete. Otherwise, your early termination fee will be $175 minus $5 for each full month of your contract term that you complete. Cancellations will become effective on the last day of that month's billing cycle, and you are responsible for all charges incurred until then. Also, if you bought your wireless device from an authorized agent or third–party vendor, you should check whether they charge a separate termination fee.

A few questions about the ka790gx and dka790gx

i have a few questions about the ka790gx and dka790gx , how much better is the dka790gx compaired to the ka790gx ? . how much difference does the ACC function make to overclocking etc , i plan on getting a phenom II 940BE or 720BE . i already have the ka790gx so would it be worth building another system using the dka790gx mobo , or should i keep what i already have and just change the cpu ?

It's largely irrelevant what other boards had VRM issues other than the KA790GX - the fact is it died at stock settings. Since there is little cost difference between the more robust DKA790GX (or Platinum if you really need 1394) why bother with the proven weakling? There are other examples around of the KA not having a robust power section. There's no way I would use even a 95W TDP CPU in the KA and absolutely not O/C.....!
As for the credentials of Custom PC, I have generally found their reviews accurate and balanced, and echo my own findings where applicable. If a little too infrequent.
The fact that the KA has such a huge VRM heatsink leads me to my other comments on the Forum, particularly regarding the "fudge" aspect:
"""Henry is spot on - the notion that adding a heatsink to the top of the D2PAK or whatever MOSFETS is effective is virtually worthless. The device's die thermal junction is the tab on the device back - which is always against the PCB pad. The majority of heat is therefore dissipated in to the board, and the fact that the epoxy plastic encapsulation gets hot is simply due to the inability of the heat to be conducted away from the device die via the tab. Not sure when Epoxy become an effective conductor of heat.... Good practice is to increase the size of the PCB pad (or "land" in American) such that the enlarged PCB copper area acts as an adequate heatsink. This is still not as effective as clamping a power device tab to an actual piece of ali or copper, but since the devices used are SMD devices, this is not possible. However, the surface area required to provide sufficient PCB copper area to act as a heatsink for several devices isn't available in the current motherboard layouts. Where industrial SBC designs differ in this respect is to place the VRM MOSFETs on the back of the PCB on very enlarged PCB pads - where real estate for components is not an issue.
Gigabyte's UD3 2oz copper mainboards sound like a good idea, on the face of it. However, without knowing how they have connected the device tabs to where and what remains a mystery. I suspect it is more hype than solution, although there will be some positive effect. From an electrical perspective, having lower resistance connecting whatever to whatever (probably just a 0V plane) is no bad thing.
The way the likes of ASUS sort of get round the problem is to increase the sheer number of MOSFET devices and effectively spread the heat dissipation over a larger physical area. This works to a degree, there is the same amount of heat being dissipated, but over several more square inches. The other advantage of this is that each leg of the VRM circuit passes less current and therefore localised heat is reduced. Remember that as well as absolute peak operating temperature causing reduced component life, thermal cycling stresses the mechanical aspects of components (die wire bonds for example) as well as the solder joints on the board. Keeping components at a relatively constant temperature, even if this is high (but within operating temperature limits), is a means of promoting longevity.
For myself, the first thing I do with a seperate VRM heatsink is take it off and use a quiet fan to blow air on to the VRM area of the PCB - this is where the heat is. This has the added benefit of actively cooling the inductors and capacitors too....
Cooling the epoxy component body is a fudge. If the epoxy (and thus any heatsink plonked on top of it) is running at 60C, the component die is way above that.....
It's better than nothing, but only just."""

A few questions about getting DSL

Similar Messages

Maybe you are looking for