A few questions about ios 6.0.1 for iPad 2
1. Are there any major bugs?
2. Does battery go down slower or faster than 5.1.1?
3. Is there any possible way to get iMovie with 5.1.1. I really don't want to upgrade, but I really want iMovie
Thanks
If you have a computer running iTunes, transfer all of your purchases into iTunes and backup the iPd so that all of your data is saved as well.
Transfer purchases.
http://support.apple.com/kb/HT1848
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
You can only use iCloud as well if you prefer to do that and if you don't have a computer, that is all that you can use. In the event that you would lose or delete an app, you can download them again for free in the purchased tab of the app store as long as you use the same Apple ID that you bought them with.
Similar Messages
-
A few questions about common "issues" before buying New iPad
I am hoping to pick up the new iPad in the next few weeks, however I have read up on some issues which I'd like some information on.
I have been using my GF's iPad 2 a lot and I really love it, however I am dead set on buying the new one, I have become pretty resolution-spoilt by the awesome screen on the 4S and this is the primary factor in wanting this new model.
With the following concerns, assuming that an iPad that I may buy might have one or more of them, could you please inform me of: any currently known official or unofficial fix, if the problem could most likely be resolved in an update or if it is likely that since the problem came to light that the later runs to be built were adjusted to avoid the problem? Thanks.
OK- first up, the bad wifi problem that people have. This is the biggest concern to me, as I use wifi a lot and won't have access to 4G, and only occasionaly access to 3G.
Secondly, the heating... OK this is not a deal breaker, I understand that it isn't a real problem however if it could be solved so that it runs almost as cool as the 2 that would be great.
Thirdly, charge times and the extra hour over 100%... Again I do realise that these aren't so much issues as just the way that it works, however I would hope that now lots of people have complained, an update would adjust the display to be more accurate, to say 100% only when it has fully charged, purely because I would rather know... Or perhaps have 100% change colour on absolute 100%. The other thing, 7 hours charging, is there a more powerful adaptor that 1: reduces the charge time, and 2: if you are using a powerdrinking app while charging, will actualy continue charging rather than just slowing the battery drain (I read that some apps will keep draining battery while on charge).
finaly, I have read about screen hue problems, this wont be too much of a problem, as I will be able to check this in store to be sure that the screen is nice, colour balanced and free of dead pixels, I will compare it to my GFs iPad 2 and also the iPhone 4, because I know that the iPad 2 is supposed to look a little more blue to give it a cold feel, while the new model and the iPhone 4S have a slightly yellowed screen for warmth, it's just that lots of people have complained about theres' being too yellow.
Thanks very much for any useful info on this.What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Should I Buy a New iPad? Or an iPad 2?
http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
iPad Q&A
http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
A Few Questions (and Answers) About the New iPad
http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the- new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
New iPad: A Polishing of the Old
http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
iPad 1, 2 and New Specifications
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
If you think you may get an iPad 2:
Refurbished iPad Prices
http://store.apple.com/us/browse/home/specialdeals/ipad
New 16GB iPad 2 Prices
http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
A lot of the posts about lack of charging is because iPad "3" users are trying to use an iPod charger, iPhone charger or connected to their computer where they get the "Not Charging" indication. A few others had a defective charger that was replaced by Apple. It remotely possible that a few iPads have defective batteries or charging circuits.
Many of the wifi connection problems are related to the users brand of wireless routers, the router setup, or the need to select a different wireless channel due to interference.
The high temp problem seems to be when users are charging AND running games with intensive graphics. The display on the new iPad takes a lot more power than the iPad 2 display.
Overall I would guess that the chance of a defective iPad is less than 1%.
Cheers, Tom -
A few questions about Memory and Power Supply for MSI 975X Platinum Powerup Edit
Bought this Motherboard: MSI 975X Platinum Powerup Edition
975X Platinum V.2(7246-020)
I have a P4 CPU HT in it with 2 512mb sticks of DDR2 memory (533mhz).
I am upgrading to a Core 2 Duo 6600 CPU which has a 1066mhz FSB
What memory speed should I purchase to achieve the fastest bus speed without overclocking???
I get confused as my current memory is 533 which I guess on a Pentium 4 with HT cuts the FSB speed in 1/2 to 266mhz.
Any recommendations?
Do I need to buy Dual Channel or can I just buy 2 sticks?
Thank you
PeterQuote from: /dot on 07-February-07, 15:46:41
Great info again guys!
I'll stay away from OCZ (I read it's more for overclockers).
@DryHeat:
I watched your sig, great setup! I'm planning for about the same setup (MSI 975x PUE, P180, C2D, ...). But will try a Scythe Ninja for CPU cooler and use an MSI graphic card (maybe 2 cards for 4 monitors in total).
Is your setup silent or just quiet? Makes a big difference for me.
What would you change now? And what is the most noisy component?
Sorry for all the questions but I'm not an expert and by budget does not permit me from making any mistakes.
The case fans create the most noise. When they are all on "low" I an hardly hear them and have to shake the mouse to see if it's on, but on medium it sounds like a "standard" computer. Not terrible, but not quite. On high they are down-right loud. -
A few questions about the Nokia Lumia 810 for T-Mo...
I recently upgraded from the Nokia E73 Mode to the Nokia Lumia 810, my first ever "smart phone" and I'm already having problems which I hope can be clarified in this forum/thread.
1. Supposedly this phone supports USB "drag & drop", but it doesn't seem to fully work for me. An example, with my previous phone I connected via USB cable and dragged computer files (Audio, Video, and Images) from my computer to the memory card of my phone. I can do this with this phone, but only somewhat. Once it's been "copied" to the SD card, I can't really edit the file from there. If I try renaming a music file for example, the window freezes saying "Program Not Responding". If I try to delete the file, it doesn't delete it either. Another big issue is once it's in my Nokia Lumia's SD card and I right-click it from my PC to edit an image with Photoshop, I can't do it. There's no "Open With..." feature. The same with audio files, I can't open with anything other than Windows Media Player, which I don't use. So does this phone really support "drag & drop" or is this just false advertising?
2. How does one change the message tone? If a so-called "inferior" phone like the Nokia E73 Mode could do it, easily, why can't the superior Windows 8 smart phone do it? The same with an actual ringtone. How does one change it?
I actually do love this phone, but the whole lack of file manager and it's inability to "drag & drop" files for me disappoints.Welcome to the forum.
the drag m drop is working according to your post. Drag n drop doesn't include altering or editing files directly on the device.
coming from Symbian, I understand your dilemmas here.
best to take the file off the device by drag n drop from the device to the PC and then alter it and then drag b drop it back to your device.
as for the memory card, I have always found it faster to write directly to a card from the PC with an adapter rather then going through the device hardware.
with wp8, you can only use custom ring tones with what you drag into the ringtones folder when connected.
I would recommend changing the file genre to ringtone too
as for the messaging and email sounds currently you are limited to the sounds that available in the device. Not even the custom tones will show.
hope that helps -
A few questions about Patone colors
I have a few questions about patone colors since this is the first time I use them. I want to use them to create a letterhead and business cards in two colors.
1)
I do understand that the uncoated is more washed out than the coated patone colors. I heard that this is because the way paper absorbs the inkt. This is why the same inkt results in different colors on different paper (right?). My question is why is the patone uncoated black so much different than normal black (c=0 m=0 y=0 k=100) or rich black:
When I print a normal document with cmyk, I can get pretty dark black colors. Why is it that I cannot have that dark black color with patone colors? Even text documents printed on a cheap printer can get a darker color than the Patone color. It just looks way too grey for me.
2) For a first mockup, I want to print the patone colors as cmyk (since I put like 10 different colors on a page for fast comparison). I know that these cmyk colors differ from the patone colors and that I cannot get a 100% representation. But is there a way to convert patone to cmyk values?
I hope that some of you can help me out with my questions.
Thanks.You can get Pantone's CMYK tints in Illustrator, (Swatches Panel > Open Swatch Library > Color Books > PANTONE+ Color Bridge Coated or Uncoated) but in my view, what's the point? If you're printing to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use Pantone's CMYK so-called "equivalents."
Pantone colors are all mixed pigmented inks, many of which fluoresce beyond the gamut limits of RGB and especially CMYK. The original Pantone Matching System (PMS) was created for the printing industry. It outlined pigmented ink formulations for each of its colors.
Most digital printers (laser or inkjet) use CMYK. The CMYK color gamut is MUCH SMALLER than what many mixed inks, printed on either coated or uncoated papers can deliver. When you specify non-coated Pantone ink in AI, according to Pantone's conversion tables, AI tries to "approximate" what that color will look like on an uncoated sheet, using CMYK. -- In my opinion, this has little relevance to real-world conditions, and is to be avoided in most situations.
If your project is going to be printed on a printing press with spot Pantone inks, then by all means, use Pantone colors. But don't trust the screen colors; rather get a Pantone swatch book and look at the actual inks on both coated and uncoated papers, according to the stock you will use on the press.
With the printing industry rapidly dwindling in favor of the web and inkjet printers, Pantone has attempted to extend its relevance beyond the pull-date by publishing (in books and in software alliances, with such as Adobe) its old PMS inks, and their supposed LAB and CMYK equivalents. I say "supposed" because again, RGB monitors and CMYK inks can never be literally equivalent to many Pantone inks. But if you're going to print your project on a printing press, Pantone inks are still very relevant as "spot colors."
I also set my AI Preferences > Appearance of Black to both Display All Blacks Accurately, and Output All Blacks Accurately. The only exception to this might be when printing on a digital printer, where there should be no registration issues.
Rich black in AI is a screen phenomenon, unless in Prefs > Appearance of Black, you also specify "Output All Inks As Rich Black," -- something I would NEVER do if outputting for an actual printing press. I always set my blacks in AI to "Output All Blacks Acurately" when outputting for a press. If you fail to do this, then on the press you will see any minor registration problems, with C, M, and Y peeking out, especially around black type. UGH!
Good luck! :+) -
Hi,
Recently I got an iPhone 4S, it is my first new phone in a long time, before this I had an old nokia, so I just have a few questions about it.
I havve read a alot of horror stories about the 4S battery life, mine seems ok, here is what I would like to know
1) How long should a healthy battery last?
2) how long should it take to charge to 100% from 1 or 2%?
On my daily commute I use listen it to music and sometimes user twiiter/facebook. I also get alerted of emails when they come in. So far it has just about lasted just about two days maybe before I had to recharge. Is this about right? As stated above I am coming from an old nokia, which is very dated now but the battery lasted almost a week before I had to charge, so having to charge my phone this often is new to me. My iPhone is really great and I just don't want any problems. I have turned off all extras that I don't need.
BTW are the iPhone 4S battery issues a software or hardware issue?
ThanksI attempted to read your post, but in amongst all the random, unrelated waffling, I couldn't actually find exactly what your iPhone related question for this "Using iPhone" forum was.
Would you like to clarify? Concisely. -
Few questions about Lenovo G550
Hello, I plan to buy an inexpensive laptop, propably it will be a Lenovo G550L but I got few questions about this model. Here are my questions:
1. What 320GB hard disks are mounted inside G550L, Western Digital, Seagate or Hitachi (exact model if possible)?
2. How are the hinges of LCD screen in this model, cause they look pretty weak. Do they break easy, does anyone got any experience with this type of hinges which are "forward type" instead of normal?
2. I have noticed that there are two types of laptop chassis in this model one is matte black and another is grey glare. How to determine which model has which finish? Which finish got laptops with T4300, 3GB RAM, 320GB HDD, Intel IGP x4500, no card reader, no hdmi.
Thanks in advance.
Regardsmy friend samsung any net, toshiba regza link, panasonic viera link is their special TM to support CEC
but just for their product not other products,for instance a samsung dvd player and a samsung lcd can sync easily with with hdmi cable
and in this case you dont need an extra remote control to control dvd besides tv.just with having a remote you can control both of them or the other audio visual products from that campany
please think???? how could you control your lenovo when it does not have a remote?
every device need to send signals to the remote not by just some wires like HDMI
lcd has a remote and a dvd player also has a remote and if those are from a unit company,they share a common signal with HDMI cable ,then you could control both of them with just one remote.
this can ease your work,as you dont need a lot of remote around your devices
but they should be from just a unit producer cause they uses different protocols
and of course they want to sell their various products and oblige you to buy other products from that producer to have the compability for having just one remote. -
Few questions about recovery on P100-400
Good evening all,
I have a few questions about recovering my laptop...
So, I was thinking if the only way to clean my entire disk is to use the Recovery DVD?
I ask this because I think that the computer becomes too "heavy" with all the applications it came with. So I was wondering if I can format the Hard Drive instead of recover it.
If I format the drive do I loose warranty? Is there any future problem related to genuine software?
It's possible to install Windows XP Pro (and not the actual windows xp media center) with the original Operative system's product key?
Thank you.
Best Regards.Hello
I will try to give you few answers and I hope it will help you.
> So, I was thinking if the only way to clean my entire disk is to use the Recovery DVD?
> I ask this because I think that the computer becomes too "heavy" with all the applications it came with. So I was > wondering if I can format the Hard Drive instead of recover it.
I do not understand what you mean with I can format the Hard Drive instead of recover it but you can do follow: install OS using delivered recovery media and after doing this remove all applications you do not need. After doing this maybe your notebook will not be heavy anymore.
> If I format the drive do I loose warranty?
NO.
> Is there any future problem related to genuine software?
I do not know what you mean exactly
> It's possible to install Windows XP Pro (and not the actual windows xp media center) with the original Operative system's product key?
No. Something like this is not possible. Product key belongs to delivered and preinstalled OS. -
Hi,
I have a few questions about syncing. Since this is my first iphone and apple product, I'm not familliar with it. My mother bought the tomtom app for navigation. And she said that it has 3 uses (for 3 different devices). Now the app is in her library on her computer. So if i try to sync with her library, it will erase all my previous apps. How come? Also I'm planning to use a laptop in college so I'll have to sync it with that.
What should I do to keep my apps?All 3rd party apps - paid and free apps include DRM protection which is tied to the iTunes account used to download the app. This is required by 3rd party app developers to prevent people from stealing from them with paid apps. If not for this, you could pay for and download the TomTom app which is not cheap and all your friends and family members with an iPhone could install the app on their iPhone without paying for it, which in effect is stealing.
There is no device limit for the number of iPods and iPhones that can be synced with the same iTunes library on the same computer, but in regards to all iTunes content - music, movies, tv shows, and 3rd party apps, an iPhone can be synced with an iTunes library on a single computer only, and photos can be transferred from a single computer only. When transferring iTunes content and photos from another computer, all iTunes content and photos transferred from a different computer will be erased from the iPhone first. -
Few questions about mac pro before buying
Hello all!
I may be buying a mac pro in a month or so and have a few questions about it.
1. ) Any one know when Apple may release the latest mac pro? Don't wanna buy some thing that'll be significantly obsolete in a few days
2. ) Is it possible to use SATA optical drives internally? I have a SATA blu ray drive I'd like to take from my PC, if that's possible.
3. ) Is it possible to get a graphics cards better than the 8800 GT for video games? (For use in OS X)
4. ) Finally, is there a significant performance difference between Apple's seemingly super expensive RAM and 3rd party RAM? (Other than the heat syncs)
Thanks for any replies.1. We have no idea when Apple will release any product until it's released. This is a user-to-user site so we have no more information about future products than you do.
2. Yes, it's possible. There are two additional SATA ports on the motherboard.
3. The only graphic cards are those provided by Apple when you order the computer as well as the non-Apple supplied ATI HD-3870 Mac/PC card. The 8800 and 3870 have close performance specs. You can find some benchmarks at Bare Feats.
4. There's no difference between the RAM Apple installs and what you can purchase on the open market. As long as the RAM meets the required specifications and has the requisite heat sink it will work just fine. -
Few questions about Calendar / SimpleDateFormat classes
Hi.
I have few questions about Calendar class:
1. How can I get only date representation (without the time)?
after doing:
Calendar cal = Calendar.getInstance();
I tried to clear unecessary fields:
cal.clear(Calendar.SECOND);
cal.clear(Calendar.MINUTE);
cal.clear(Calendar.HOUR_OF_DAY);
But after printing the time, it seems that the HOUR was not cleared:
SimpleDateFormat sdf1 = new SimpleDateFormat("dd/MM/yyyy HH:mm:ss");
System.out.println(sdf1.format(cal.getTime()));
---> 03/11/2004 17:00:00
Am I missing somthing?
2. I want to make sure that two different formats couldn't be compared. i.e., if I'll try to parse one String according to different format -- ParseException will be thrown.
String date = "19/04/2004 13:06:10";
SimpleDateFormat sdf = new SimpleDateFormat("dd/MM/yyyy");
Date dateObj = sdf.parse(date);
However, even though that formats are different, no exception is thrown and the return Date is 19/04/2004 00:00:00.
How can I cause to exception to be thrown if formats are not identical?
Thanks in advancedThe Calendar class has a few of what Microsoft would call 'features'. :^)
To clear the time, call:
calendar.set(calendar.get(Calendar.YEAR), calendar.get(Calendar.MONTH), calendar.get(Calendar.DAY), 0, 0, 0);
If you want 'pessimistic' rather than 'optimistic' date parsing, you have two options:
1) Call calendar.setLenient(false);
See if that is strict enough for your needs, otherwise:
2) Write code to ensure a stricter parsing of the string passed in. For example, you could very simply check the length of the string to determine if time data is also present.
When parsing, a string like '02/29/02' would parse to the date '03/01/02'. Setting lenient to false may fix this, but the surest way is to do some testing and then make the parsing more pessimistic where it suits your needs.
- Saish
"My karma ran over your dogma." - Anon -
Hi
i have few questions about cs6
is there a way to let the ruler and straighten like cs5 ? i gave a look to my friend cs6 and cs6 ruler and straighten leave transparent image around the corner
and is there a way to set for each adjustament layer a size ? for example i like a big curve window but for example have a smaller level windows
thanks
cheersmantralightroom wrote:
nope
The feature is there, where Christoph described it, though I would have liked it if they'd left an option for the Ruler Tool button to allow people to add "and crop" as well. But Adobe have confirmed they moved it out of there on purpose, presumably because new users would expect to crop their image using the Crop Tool, not the Ruler Tool.
mantralightroom wrote:
i would like to know if i can store the size of each dialog window
You MUST be talking about the Properties panel, where adjustment layer info is shown, because the dialogs you get when you do things like Image - Adjust - Levels or Image - Adjust - Curves is not resizeable in any way I can see. At least not on a PC.
No, there's no special option that allows dialog sizes to be saved separately. It's just one panel, and the size of the panel itself defines the size of the contents up to each of their max sizes.
-Noel -
Few questions about upgrading database
Hi everyone,
greetings of the day
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,
2.I think we need to create tablespaces ,do we need to create users as well
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than creating a new sysaux tablespace
4.How come we get consistent export
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the database
2.How can we move the files to the new location
3.Can we change db_name of the database
4.Can we use the old database as well
In manual upgration using catupgrd scripts
1.Can we rename the db_name
2.can we use old database as well
3.how to move the database files to the new location
4.can we perform this kind of upgrade on a different server
5.when we startup upgrade in the new home ,how it identifies the old database in-order to upgrade the old one
Thanksudayjampani wrote:
Hi everyone,
greetings of the day
Pl post details of source and target database versions, along with your OS details.
I have few questions about the upgrading database,
In export and import mode
1.can we have new name for the target database,Yes.
2.I think we need to create tablespaces ,do we need to create users as wellYou can create users, but it is not necessary. You need to pre-create tablespaces only if their characteristics/locations on the target are different than on the source.
3.If we are upgrading from 9i to 10g database ,any activity to be perfromed other than thisNot that I am aware of - see the steps in the Upgrade Guide - http://docs.oracle.com/cd/B19306_01/server.102/b14238/expimp.htm
4.How come we get consistent export wetherEnsure the database is started in restricted mode, so users will not be able to access the database during the export.
>
In DBUA mode ( in the same machine only)
1.Do we need shutdown / startup restrict the databaseNo - DBUA will do this automatically for you.
2.How can we move the files to the new locationYou can after the upgrade move the datafiles to wherever you want - use the ALTER DATABASE RENAME DATAFILE (http://docs.oracle.com/cd/B19306_01/server.102/b14200/statements_1004.htm#i2082829) command.
3.Can we change db_name of the databaseI do not believe this is possible with DBUA.
4.Can we use the old database as wellNo - the database will be upgraded by DBUA - there is no "old" database.
>
>
In manual upgration using catupgrd scripts
1.Can we rename the db_nameYes.
2.can we use old database as wellNo - the scripts will upgrade the database - there is no "old" database.
3.how to move the database files to the new locationSee above.
4.can we perform this kind of upgrade on a different serverPl elaborate on what you mean by this. You can copy the existing database to a different server (assuming compatible OS) and upgrade it there.
>
>
ThanksHTH
Srini -
Few questions about apex + epg and cookie blocked by IE6
Hi,
I would like to ask a few questions about apex and epg.
I have already installed and configured apex 3.2 on oracle 10g (on my localhost - computer name 'chen_rong', ip address -192.168.88.175 ), and enable anonymous access xdb http server.
now,
1. I can access 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' without input username / password for realm 'XDB' in IE6;
2. I can access 'http://localhost/apex/apex_admin' , 'http://192.168.88.175/apex/apex_admin' , and I can be redirected into apex administation page after input admin/<my apex admin password> for realm 'APEX' in IE6;
3. I can access 'http://chen_rong/apex/apex_admin' in IE6, but after input admin/password , I can not be redirected into administation page, because the cookie was blocked by IE6.
then, the first question is :
Q1: What is the difference among 'http://chen_rong' , 'http://localhost' , 'http://192.168.88.175' ? I have already include site 'chen_rong' into my trusted stes! why the cookie was blocked by IE6. I have already tried firefox and google browser, both of them were ok for 'chen_rong', no cookie blocked from site 'chen_rong'!
and,
1. I have tried to use the script in attachment to test http authentication and also want to catch the cookie by utl_http .
2. please review the script for me.
3. I did:
SQL> exec show_url('http://localhost/apex/apex_admin/','ADMIN','Passw0rd');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm XDB for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
MS-Author-Via: DAV
DAV: 1,2,<http://www.oracle.com/xdb/webdav/props>
Server: Oracle XML DB/Oracle Database
WWW-Authenticate: Basic realm="XDB"
Date: Tue, 04 Aug 2009 02:25:15 GMT
Content-Type: text/html; charset=GBK
Content-Length: 147
======================================
PL/SQL procedure successfully completed
4. I also did :
SQL> exec show_url('http://localhost/apex/apex_admin/','ANONYMOUS','ANONYMOUS');
HTTP response status code: 500
HTTP response reason phrase: Internal Server Error
Check if the Web site is up.
PL/SQL procedure successfully completed
SQL> exec show_url('http://localhost/apex/apex_admin/','SYSTEM','apexsite');
HTTP response status code: 401
HTTP response reason phrase: Unauthorized
Please supplied the required Basic authentication username/password for realm APEX for the Web page.
Web page http://localhost/apex/apex_admin/ is protected.
Content-Type: text/html
Content-Length: 147
WWW-Authenticate: Basic realm="APEX"
======================================
PL/SQL procedure successfully completed
my second questions is :
Q2: After I entered into realm 'XDB', I still need went into realm'APEX'. how could I change the script show_url to accomplish these two tasks and successfully get the cookie from site.
the show_url script is as following:
CREATE OR REPLACE PROCEDURE show_url
(url IN VARCHAR2,
username IN VARCHAR2 DEFAULT NULL,
password IN VARCHAR2 DEFAULT NULL)
AS
req UTL_HTTP.REQ;
resp UTL_HTTP.RESP;
name VARCHAR2(256);
value VARCHAR2(1024);
data VARCHAR2(255);
my_scheme VARCHAR2(256);
my_realm VARCHAR2(256);
my_proxy BOOLEAN;
cookies UTL_HTTP.COOKIE_TABLE;
secure VARCHAR2(1);
BEGIN
-- When going through a firewall, pass requests through this host.
-- Specify sites inside the firewall that don't need the proxy host.
-- UTL_HTTP.SET_PROXY('proxy.example.com', 'corp.example.com');
-- Ask UTL_HTTP not to raise an exception for 4xx and 5xx status codes,
-- rather than just returning the text of the error page.
UTL_HTTP.SET_RESPONSE_ERROR_CHECK(FALSE);
-- Begin retrieving this Web page.
req := UTL_HTTP.BEGIN_REQUEST(url);
-- Identify yourself.
-- Some sites serve special pages for particular browsers.
UTL_HTTP.SET_HEADER(req, 'User-Agent', 'Mozilla/4.0');
-- Specify user ID and password for pages that require them.
IF (username IS NOT NULL) THEN
UTL_HTTP.SET_AUTHENTICATION(req, username, password, 'Basic', false);
END IF;
-- Start receiving the HTML text.
resp := UTL_HTTP.GET_RESPONSE(req);
-- Show status codes and reason phrase of response.
DBMS_OUTPUT.PUT_LINE('HTTP response status code: ' || resp.status_code);
DBMS_OUTPUT.PUT_LINE
('HTTP response reason phrase: ' || resp.reason_phrase);
-- Look for client-side error and report it.
IF (resp.status_code >= 400) AND (resp.status_code <= 499) THEN
-- Detect whether page is password protected
-- and you didn't supply the right authorization.
IF (resp.status_code = UTL_HTTP.HTTP_UNAUTHORIZED) THEN
UTL_HTTP.GET_AUTHENTICATION(resp, my_scheme, my_realm, my_proxy);
IF (my_proxy) THEN
DBMS_OUTPUT.PUT_LINE('Web proxy server is protected.');
DBMS_OUTPUT.PUT('Please supply the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the proxy server.');
ELSE
DBMS_OUTPUT.PUT_LINE('Please supplied the required ' || my_scheme ||
' authentication username/password for realm ' || my_realm ||
' for the Web page.');
DBMS_OUTPUT.PUT_LINE('Web page ' || url || ' is protected.');
END IF;
ELSE
DBMS_OUTPUT.PUT_LINE('Check the URL.');
END IF;
-- UTL_HTTP.END_RESPONSE(resp);
-- RETURN;
-- Look for server-side error and report it.
ELSIF (resp.status_code >= 500) AND (resp.status_code <= 599) THEN
DBMS_OUTPUT.PUT_LINE('Check if the Web site is up.');
UTL_HTTP.END_RESPONSE(resp);
RETURN;
END IF;
-- HTTP header lines contain information about cookies, character sets,
-- and other data that client and server can use to customize each
-- session.
FOR i IN 1..UTL_HTTP.GET_HEADER_COUNT(resp) LOOP
UTL_HTTP.GET_HEADER(resp, i, name, value);
DBMS_OUTPUT.PUT_LINE(name || ': ' || value);
END LOOP;
-- Read lines until none are left and an exception is raised.
--LOOP
-- UTL_HTTP.READ_LINE(resp, value);
-- DBMS_OUTPUT.PUT_LINE(value);
--END LOOP;
UTL_HTTP.GET_COOKIES(cookies);
dbms_output.put_line('======================================');
FOR i in 1..cookies.count LOOP
IF (cookies(i).secure) THEN
secure := 'Y';
ELSE
secure := 'N';
END IF;
-- INSERT INTO my_cookies
-- VALUES (my_session_id, cookies(i).name, cookies(i).value,
-- cookies(i).domain,
-- cookies(i).expire, cookies(i).path, secure, cookies(i).version);
dbms_output.put_line('site:'||url);
dbms_output.put_line('cookies:');
dbms_output.put_line('name:'||cookies(i).name);
dbms_output.put_line('value:'||cookies(i).value);
dbms_output.put_line('domain:'||cookies(i).domain);
dbms_output.put_line('expire:'||cookies(i).expire);
dbms_output.put_line('path:'||cookies(i).path);
dbms_output.put_line('secure:'||secure);
dbms_output.put_line('version:'||cookies(i).version);
END LOOP;
UTL_HTTP.END_RESPONSE(resp);
EXCEPTION
WHEN UTL_HTTP.END_OF_BODY THEN
UTL_HTTP.END_RESPONSE(resp);
END;
/I use oracle database enterprise edtion 10.2.0.3. I have already figured out the epg on 10.2.0.3 to support apex 3.2.
And as I described above, the apex site works fine for ip address , and localhost. but the cookie will be blocked by IE6, if I want to access the site by 'http://computername:port/apex/apex_admin'. This problem does not occured in firefox and google browser. Could someone give me answer? -
A few questions about MacBooks and Parallels Desktop.
I have a few questions about MacBooks and Parallels Desktop.
1) I understand I need at least 1GB of RAM to run Parallels Desktop but what about the hard drive, is the stock 60GB drive big enough?
2) Related to question 1, even if it was big enough to allow me to install and run Windows would the 60GB drive be enough if I wanted to install a Linux distribution as well?
3) This has nothing to do with Parallels Desktop but thought I'd ask it here anyway, do Apple Stores carry just the stock MacBooks, or do they carry other configurations?
Thanks
Keith1. Depend on how intensive you use that HD for saving data on both Mac OS and XP. For standard installation on both OS X and XP, the space of 60 Gb is enough.
2. Same answer as no 1. You can install all three on that HD space, but the extra spacce available will be less and less for your data. You can save your data on external or back up on cd/dvd and erase it from the HD to keep the free space.
Remember to leave at least 2 or 3 Gb for virtual memory usage.
3. Just call them, maybe they don't have it in store stock, but by appointment they might configure one for you before your pick-up date.
Good Luck
Maybe you are looking for
-
Airport Extreme no longer recognizes external HDD
My Airport Extreme has suddenly stopped recognizing the external HDD I have attached to it. This happened about 2 weeks ago, and has been driving me absolutely insane since (I use this HDD to store all my music, and as such have not been able to list
-
How do I make my text field automatically upper case?
How do I make my text field in a form automatically upper case?
-
I cant delete singel/multiple pictures from my albums, without deleting the same picures from another album. When you press delete on a picture you get a question wich says "delete from all albums", and thats it? You cant choose to select yes or no.
-
Commande CS6 version étudiant et enseignant
Bonjour, Depuis environ une semaine, j'essaie de commander CS6 enseignant/étudiant. Quatre jours après l'envoi des justificatifs, la réception d'un message émis par un certain M. Ricardo Peetermans, du service clientèle Adobe, stipulant que ces docum
-
Error:Out-of-bounds pointer argument CVI12.0 Cannot access data member of a nested structure
Hi, I'm getting an error "FATAL RUN-TIME ERROR: Out-of-bounds pointer argument (before start of memory block)" while trying to access a data element from a nested structure (structure with in a structure) in a dll file in debug as well as release m