A few questions about replacing a PSU with few variations.

So I've spent a lot of time the last few weeks browsing these forums, searching the web, watching eBay, and asking around locally. I am still torn between forking over the $150-$200 for an eBay replacement or trying one of the adapters (http://atxg4.com/mdd.html) with an ATX PSU.
First off, I would like to get a little insight into my problem, to make sure I'm diagnosing it correctly. Two weeks ago I went to turn on my trusty 1GHz FW800 to type a quick document for work. I have been using this machine for over 6 years, without a single problem. The only modifications I made to the machine in the first few years (besides OS updates) was 3 sticks of memory, and another 60gig HD. Two years ago, I wanted to update my vid card to try and squeeze a few more years out of the machine. I went with the ATI 9800pro 128mb card. In order to use my Studio Display with this new card, I had to purchase the DVI to ADC Adapter with it's own power supply. Everything was peachy.
The other night, I pushed my power button, like I've done thousands of times before, and the button lit up like usual, but I didn't hear a fan or any noise coming from the machine, and the power button slowly faded. I then proceeded to push it again, and this time nothing...no light, no noise. And this is how it currently sits...
I've done pretty much everything I can think of to figure out what's wrong. I've tried unplugging and re-plugging, replacing and testing the power cord, using a different surge protector, using a different outlet, resetting the PMU, replacing and testing the battery, and reseating my memory sticks and graphics card. When the machine is plugged in, there are no red lights that glow. So, I followed the PSU test using a multimeter. I removed the black connector cover and stuck the probes in as best I could to get a reading, and I could not get a single reading from the first step of the PSU test. Am I safe to say my PSU is shot? Or...should I get some kind of a reading even if it is shot?
Lastly, I've read that one of the drawbacks of using an ATX PSU is that I will not be able to use my Cinema Display. With my current setup, using the DVI to ADC Adapter with it's own power, will it be possible for me to continue using my Apple Cinema Display if I were to use an ATX PSU? Thanks in advance for any insight/advice anyone can give!

The power Supply adapter page says you won't have the 25V for the Cinema Display. Your other power just may work. Hopefully, someone else who has done the ATX mod & has a cinema display will respond.
Suggest you also post your question in the cimena display forum at http://discussions.apple.com/category.jspa?categoryID=111
 Cheers, Tom

Similar Messages

Question about replacing hard drive

Hey everyone. I had a question about replacing a hard drive for a 2012 midyear pro. I have replaced hard drives before on windows machines, but this is the first mac I have owned. It didn't come with a hard drive when I bought it, but I do have mavericks installed on a usb. As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct? As far as I am concerned, hardware is hardware and should be the same as replacing a hard drive on a dell laptop but wanted to see if apple has any weird restrictions.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive. Thanks
Excuse and ny ignorance as I am new to macs.

scottrf8 wrote:
As far as a new hard drive, will any 2.5 laptop hard drive work? I read it needs to be 9.5mm thick. Is that correct?
Yes. Any SATA drive will do with those specifications.
Also, is there anything I need to consider or be aware of when putting in a new hard drive? Or can I just hook up the hard drive and plug in the USB and install the software onto the hard drive.
Assuming that the installer is functioning correctly, install the HDD in the MBP and engage the installer. You should come across a 4 option menu. Select Disk Utility from it. Open Disk Utility>Erase and format the HDD to Mac OS Extended (Journlaled). One you finish that, you may install the OSX.
Ciao.

Hi I have a question about shooting in Raw with my Canon EOS 6d. I'm in the process of learning photography and my goal was to start shooting in raw. I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The pho

Hi I have a question about shooting in Raw with my Canon EOS 6d.
I'm in the process of learning photography and my goal was to start shooting in raw.
I have Photoshop CS5. When I tried to edit my images in raw I received an error message stating, "The photoshop camera raw plug-in did not recognize the format. If these files are from a camera, you may need to update your camera raw plug in."
In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6. My version of CS5 is 6.0.0.205. Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost. THANKS in advance!
Heather

In researching the issue I read that to edit in raw you need a camera model requirement of at least 7.3 which only works with CS6.
That is correct. Your camera was first supported by Camera Raw 7.3. Camera Raw 7.3 will not work with CS5. You need CS6 or CC.
Being new to all this I see that my options are to upgrade to CS6 or convert by using DNG converter and paying a monthly fee. Two things I know nothing about and don't know which is would be more beneficial.
I'd appreciate any advise on which route to go and how upgrade and what it may cost.
It all depends on your preferred workflow and your budget.
Using the DNG converter is free. There is no monthly fee. You use the converter to convert all Raw files from the EOS 6D to DNGs then edit the DNGs in CS5. That's an extra step every time - every photo. Some people don't like the extra step. Others don't mind.
Camera raw, DNG | Adobe Photoshop CC
Or you can upgrade to CS6 (non-Cloud) and pay the upgrade fee
Creative Suite 6
Or join the Cloud and pay the monthly fee
Or join the Photoshop Photography Program (US9.99/month) and get PS CC+LR

I have a question about Configuration of Post with Clearing

I have a question about confiruation of the post with clearing which is t-doce 'FB05'.
When I make post with clearing on 'FB05', I can change the additional selections.
Where can I control the confiruation of the additional selections in t-code 'FB05'
Please, tell me the menu path.

Hi,
In SPRO, go to
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Incoming Payments > Manual Incoming Payments > Make Settings for Processing Open Items > Choose Selection Fields
Hope this helps.
Thanks

Question about replacing corrupted file in windows 7

hi,
I read in windows 7 bible that if a system file is corrupted , I can replace it with system recovery tool (at command prompt) if I have onother computer with windows 7 installed.
my question is here , if I replace any file with copy the file from computer to dvd and replac it on my computer , does the windows version must be the same for 64 bit or it doesn't a matter.
thanks
johan
h.david

Hi,
Yes, the version must be the same. You may be able to get a known good copy of the system file from another computer that is
running the same version of Windows with your computer. For different versions there may be different configuration settings in the files that you operating on which if replaced with the wrong version might cause new issues.
More information regarding How to manually replace a corrupted system file with a known good copy of the file, please check it in the link:Use
the System File Checker tool to repair missing or corrupted system files
Hope this may help
Best regards
Michael
If you have any feedback on our support, please click
here.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Question About streaming live video with FMS3

Thank you very much for you efforts ...
I've tested an exciting tutorial about   streaming live video with Flash Media Server 3.5..
every thing went good and i could see my webcam broadcast from my machine through my web site but unfortunately I can't see it from any other machine
I'm using Microsoft windows XP SP2
and flash media live encoder 3
but my web server run UNIX
is this a problem???
Please send me feedback if its possible
thank you very much

Dear Janaki
Thank you very much for you efforts ....
i've done what you asked me exactly
this is what i got when I've opened the URL from my machine which runs the FMS
#Date: 2010-03-25
#Fields: x-category    x-event    date    time    x-pid    c-ip    cs-bytes    sc-bytes    x-sname    sc-stream-bytes    x-file-size    x-file-length    x-status    x-comment
session    connect    2010-03-25    23:11:17    7932    127.0.0.1    3073    3073    -    -    -    -    200    -
session    connect    2010-03-25    23:12:43    7932    127.0.0.1    3073    3377    -    -    -    -    200    -
stream    play    2010-03-25    23:12:43    7932    127.0.0.1    3139    3451    mylivestream    0    -    -    200    -
and when i opened it from another machine nothing changed or added to the log file
is it a problem with my webserver ??? its Lunix server and my OS is windows???
thank you very much

Question about Raid set up with (SB600) K9A2 Platinum V 1.0

I am having trouble setting up my raid. I am using Windows XP Pro and go through the usual set up procedures using F6 command then installing the drivers etc. Once I get everything up and running installed on Raid 0 the computer works very well for a few days. Then later BSOD. The first was a 0000007b stop error, then I got the system back up again only to have it a few days then another BSOD 00000024 stop error. This time I was not able to bring it back. I thought my problem was linked to a RAM issue as I was using OCZ PC2 6400 DDR2 OCZ2G8008GQ (2X2GB). The reason I thought this was when I went to the motherboard site for approved ram, this ram was not there, then on OCZ site it was also not tested, then I went to newegg and used thier motherboard ram compatability screener and it did not show up either. So I bought the Giel ram and am now trying to set it back up again though I could not get it back still. So I finally just reformatted the drives (using another computer and a hard drive enclosure)and am getting ready to reinstall everything. I want to make sure I am using the right SB600 drivers for my application. I should be selecting AHCI X86 or x64. This does pertain to the operating system (I am using Win XP 32 Bit) or the processor (I am using the Kuma Athlon X2 7750 2.7Ghz)
I believe I should be selecting the x86 drivers when installing windows. Am I right? I just want to make sure I do not screw anything up so as to bring on the horrible BSODs again. I realize this could be some driver issue as well that could have caused this. I did everything I could to make sure it was not the hard drives.
The last question I have is: In order to ensure proper operation of the dual channel ram, (I have read the book, still confused a bit), I must install the ram with one stick in the first slot nearest the CPU and the other in the first slot of the opposite color? In this case Green/Orange slots.
Mainboard: MSI K9A2 Platinum 790FX
CPU: Athlon X2 Kuma 7750 AM2+ 2.7Ghz Processor
CPU-Cooler: Factory Supplied
RAM: 4GB (2X2GB) G Skill F2-8500CL5D-4GBPI DDR2-1066 Dual Channel
GPU: AMD790FX
VIDEO: PowerColor HD4830 512MB GDDR3
HDD: 2 Velociraptor 150 10000 rpm drives WD1500HLFS
DVD: ASUS DRW-22B1LT SATA Drive
Floppy: YES
Power Supply: CORSAIR CMPSU-650TX 650W ATX12V / EPS12V SLI Ready CrossFire Ready
OS: Windows XP Pro SP1 (Updated to SP3)

I was just trying to obtain the fastest load times/install times. When the machine was first running it was very quick with no cpu temps running beyond 34C, no abnormal performance. This is my wifes computer though. Things began to go astray after she updated through windows update to SP3. I am now using a slipstreamed CD with SP3 already on it. She said she was clicking on the internet explorer "E" icon and it just shut off. THen when it rebooted (it was still set that way in windows recovery) it started loading windows then BSOD 0000007b error. I fixed it by finally getting into windows recovery and running fixboot, then fixmbr, then chkdsk /r /f. It started working fine again. Then later maybe two days later it happend again this time wihtout the restarting. She was working on something else this time and it shutdown again. This time when it tried ot reload windows I was getting the ntfs.sys issue with a 00000024 stop error. I could not do the same magic with windows recovery any longer. When I tried it indicated it repaired the boot, the mbr, but when I tried to run the chkdsk, it gave me disk read errors, such as "this disk has unrecoverable errors". I used Western Digital test programs on the drives by removing them and installing them into an enclosure and taking them to a good computer. One drive I could see in windows and it reflected 140G/B, the other would pick up but not in my computer. It also showed the drive as having the entire quantity as the RAID together had of 298G/B versus the real size of the drive 150G/B. I just figured that was the drive that was set up as LD 1 in the RAID setup (prior to windows) and possible was the drive with he boot sector on it??? I could get another drive and include it into the array, but then just figure I will have to worry about 3 drives versus 2. She keeps improtant backup stuff on an external drive. I will tone down the ram to 800. Should I set the latency in Bios though to the 5-5-5-15? or just leave everything at auto like I hade done before? Though this ram is new and was not in the computer when this happened. I had replaced the other OCZ Gold stuff and put in the G Skill stuff I have now. I had previously stated Giel, but it is G Skill, sorry about that. I may just do what you say, guess sleep on it and decide whether to just install the drives with OS/Programs on one and data on the other.

Multiple questions about using iWeb '09 with my Host Excellence, GoDaddy & Storenvy Accounts. Can you Help?

Hello, my name is Luis Diaz and I have always appreciated the help here in the iWeb community. I've been using iWeb for a long time. For some reason my usernames are not working lately - LuisDiazArt or RabidArt)
I updated my domain service with Host Excellence before MobileMe expired and thank you guys for the help with that. So far it's been a flawless service and because of that I'm very happy. I also have all my domains in GoDaddy. They have been very helpful
Okay I'm going to try to explain my current problem. I'm trying to create a subdomain in GoDaddy for my website: LuisDiazArt.com
I went and added a Subdomain in the Control Panel as: store.LuisDiazArt.com The subdomain suppose to mask my store: luisdiaz.storenvy.com
I thought by adding this subdomain it would make all the addresses look similar (and more clean) just in case someone gets lost along the way.
So what's happening after I waited an hour is I'm getting: http://store.luisdiazart.com/LuisDiazArt.com/Art_of_Luis_Diaz_%7C_LuisDiazArt.co m.html
I'm getting the huge and familair long addresses and it is not pointing to my store, but to the homepage.
Did I do something wrong or do I not understand something fully about subdomains? I thought you can make a subdomain point to another site. Perhaps it can't be done the way I'm thinking about this.
So to fix this issue I am thinking about making a duplicate website with a different domain name (RabidArt) and mask it with LuisDiazArt (this is site name I use on business card and everything else). After that make a subdomain with the same: http://store.luisdiazart.com
Perhaps this may fix the problem.
So to do this I may need to add another site onto my account (Basic and not Business) on HostExcellence.
So my other questions are:
Can I have multiple domains or websites using iWeb on a Basic Host Excellence Account? I checked out a few websites, but couldn't really find out if I can have multiple domains/websites using iWeb on Host Excellence with my current account.
I do know how to make a new duplicate site, but do you publish it the same way as you would with the regular site or do I have to so something different?
Hopefully the problem can be fixed not having to do a new site and maybe it was something I did wrong when I added a subdomain.

To add more domains you need to upgrade your account.
To have a sub domain for your store you need to create a separate site in iWeb and upload these files to the store.luisdiazart.com folder.
The files for the main site go in the luisdiazart folder.
Use an external hyperlink to link one to the other.

Question about RADIUS server configuration with a MacBook Pro

Hello,
I own a modem router which is capable of WPA2 Enterprise and I want to use it with a RADIUS server for authentication and security purposes.
However, I have a few doubts about this.
MY CONFIGURATION:
The modem router would be connected to a fixed PC with Windows and to a MacBook Pro (both with Ethernet)
The RADIUS server would be running on the MacBook Pro (freeRADIUS)
The bold is the issue, that comes when I disconnect the MBP (it's a notebook, so I use it disconnected from the router sometimes).
Supposing the router would have recognized it (correct configuration), it would disconnect from it.
My questions:
Would Wi-Fi be lost in this manner? Or would the modem router automatically switch to another Wi-Fi authentication?
If I reconnected the MBP to the modem router and re-run the RADIUS server, would I need to access the control panel and re-configure the WPA2 Enterprise in order for Wi-Fi to work again?
Thanks in advance,
Tyrexionibus

"Full HD 3DD camcorder..." Marketing at it's best.
This is HDV, right? HDV has the same data rate as DV...13.6GB/hour. But because of the MPEG-2 Long GOP format the HDV format employs, it can be a bit tough to edit, but mainly when rendering effects. IT will be slower than DV, and you can't monitor thru the camera like you can with DV, but a simple FW400 drive and Intel Mac will be fine. Better if you can convert to ProRes upon ingest, but then that eats up a LOT more space and requires at least FW800...
http://library.creativecow.net/articles/poisson_chris/hdv-prores.php
Shane

Question about using a Projector with MacBook Pro

Sorry if this is the wrong post location, but I figured people here would be the most knowledgeable about the topic.
I'm looking into getting a portable projector for under $450 that will work with my 2009 MacBook Pro for: a) watching instructional videos and b) doing some web surfing and a little programing. I can't get a monitor because I need portability and a picture at least 30" due to some visions issues.
I've looked into a few including the Optoma PK301 (sold at apple) and the Samsung 410ME (higher lumens, but lower res). Most of them have a max resolution of 800x600 and I'm wondering how that will appear on a 30"-45" projection? Will websites wider than 800 pixels be cut off? Does that mean a video with a resolution of 960x540 will be cut off or look funny?
The PK301 has a Native WVGA (854 x 480), but "supports" WXGA (1280 x 800) through VGA adapter; HD (1080i) through HDMI. So how will that render on the wall?
I sincerely appreciate your time and help.

I bought the PK301 becasue it has great reviews. But not on the MAC products... If any mac techs are around... appreciate some help here. Thanks.
Sharon

Questions about TANDBERG MXP 550 with Call manager 4.2

Hello,
I have an TANDBERG MXP550 configured as an H.323 client in call manager 4.2 without a gatekeeper.
1. When I make a call between the TANDBERG and another phone registered. I have the ip address of the call manager displayed on the screen instead of the extension number. Is it possible to display the extension number without a gatekeeper ?
2. The other question is about the streaming. Can I get and read the multicast stream on a PC with a software client ? I tried with VLC (VideoLan Client), with the multicast address I don't get the stream. When I activate the Session Announcement Protocol (SAP) I can receive the stream, but the video is bad (probably a codec problem). Did somebody find a software client which reads the multicast stream?
Thanks,

Call manager provides the called party with the extension or directory number of the calling party on a display. You can use the Calling Line ID Presentation field in the Gateway Configuration window to control whether the CLID displays for all outgoing calls on the gateway.Refer URL
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a008070e48b.html#wp1051056

Questions about "Diff Sequence File With..." function

Hello,
I've started working on a project where I'm maintaining a piece of older code written by a since-departed employee of my company. It's a TestStand 3.0 sequence file calling on Labview 7.0 code. The thing is, there were two of these installations done at different times and, somewhere in the woods between stations 1 & 2, the code base diverged. Part of it was due to not being able to get exact duplicate hardware for the PXI chassis and part was, apparently, due to the fact the client used the 2 machines to test different UUT models.
So, I'm looking at copies of the installed code base on the two machines using the diff feature in TestStand. (If it makes a difference, I'm doing this viewing in TestStand 3.5 since TS3.0 has mysteriously gone corrupt on me at the moment on my main development computer and, if memory serves, you have to uninstall all the later version of TS to reinstall an older version. An altogether fun process, no doubt, but a little time consuming.)
Anyway, the first thing I notice is that very many of the sequence steps have different Step Properties.Step ID values that look something like this: "ID#:2vMTp0db002mQDXArddRSA". Messing with the diff screen showed an option to "Ignore Unique Step Ids" which got rid of these. Regarding these unique step ID's: When are they generated and do they remain constant on a particular machine? Beyond mere curiosity, I wonder because another diff is in some of the "On Pass Target" or "On Custom Condition True Target" under certain Step Properties and the value under there looks suspiciously like those unique ID's (i.e. ""ID#randomstuff""). Are these all dynamically updated at runtime or will I break something by changing those (say if I copy a sequence from one version overwriting it in the other)?
So, I filtered the unique ID's out. The next large area of difference is that many, but by no means all, Labview VI calls have a difference under Step Properties > Flexible Labview Adapter Properties > ViCall > Connector Pane Checksum > Value. Also, in a few other instances, ViCall > error out > Connector Number is different as well. Does this indicate a different underlying VI?
There are a few other differences, but I can interpret those. My goal is to get one sequence file for both machines so the code will be easier to maintain. I do think that some of the VI's with different Connector Pane Checksums may be different between the two installations since one of the different hardware components required a different driver library. This leads to a third question, what does it take to use identical sequence files when the underlying VI's might differ? Is it just the interface needs to be the same? Like the connector pane has the same geometry and data types for the exposed inputs and outputs?
Thanks for any help,
Mike
Solved!
Go to Solution.

I just got off the phone with NI support, so no worries on the answers.
Short versions:
The unique ID's are regenerated when a sequence is copied.
Teststand doesn't need higher versions uninstalled to reinstall an earlier copy.
Connector Pane Checksum implies a different underlying VI, but having the same connector geometry/inputs/outputs/types should allow you to have a different VI for different installations without different sequence files.
Still waiting to hear back from support on whether the goto pointers get updated properly when a sequence or portion of a sequence is copied.

(newbie) Question about replacing .class files and web.xml file

I'm new to servlets and I have two quick questions...
Do I absolutely need a web.xml file to define all my servlets, or can I simply place .class files into the WEB-INF directory and expect them to run?
If my application server (for example Tomcat) is running and I replace a servlet .class file, do I need to restart the server for the new .class file to take effect?
...or are both of these questions specific to the application server I'm using?

Hi,
From an article I read:
With Tomcat 3.x, by default servlet container was set up to allow invoking a servet through a common mapping under the /servlet/ directory.
A servlet could be accessed by simply using an url like this one:
http://[domain]:[port]/[context]/servlet/[servlet full qualified name].
The mapping was set inside the web application descriptor (web.xml), located under $TOMCAT_HOME/conf.
With Tomcat 4.x the Jakarta developers have decided to stop allowing this by default. The <servlet-mapping> tag that sets this mapping up, has been commented inside the default web application descriptor (web.xml), located under $CATALINA_HOME/conf:


A developer can simply map all the servlet inside the web application descriptor of its own web application (that is highly suggested), or simply uncomment that mapping (that is highly discouraged).
It is important to notice that the /servlet/ isn't part of Servlet 2.3 specifications so there are no guarantee that the container will support that. So, if the developer decides to uncomment that mapping, the application will loose portabiliy.
And declangallagher, I will use caution in future :-)

One question about lcds2.5 link with java

when i am creating a custom Message Service adapter,found a
question with rewriting invoke() method.
java class :
package test;
import flex.messaging.services.ServiceAdapter;
import flex.messaging.services.MessageService;
import flex.messaging.messages.Message;
public class TestAdapter extends ServiceAdapter {
public Object invoke(Message message) {
MessageService msgService = (MessageService)service;
msgService.pushMessageToClients(message, true);
msgService.sendPushMessageFromPeer(message, true);
return null;
error:
service can not resolved about MessageService msgService =
(MessageService)service;
please tell me a method :how to write this TestAdapter class.

ths, i can success.
but one error occur when i send message from java class to
lcds2.5 service.
i tranfer this IMessageUtil interface's setMessage method,set
param as "test",but no value in mxml file's mx:Consumer .
my message-config.xml is correct.
message-config.xml:
<adapter-definition id="fdschathandler" class="test"/>
<destination id="fdschat">
<properties>
<network>
<session-timeout>0</session-timeout>
</network>
<server>
<max-cache-size>1000</max-cache-size>
<message-time-to-live>0</message-time-to-live>
<durable>false</durable>
</server>
</properties>
<channels>
<channel ref="my-rtmp"/>
</channels>
<adapter ref="fdschathandler"/>
</destination>
java class:
package test;
import flex.messaging.MessageBroker;
import flex.messaging.MessageException;
import flex.messaging.messages.AsyncMessage;
import flex.messaging.messages.Message;
import flex.messaging.services.MessageService;
import flex.messaging.services.ServiceAdapter;
public class MessageUtil extends ServiceAdapter implements
IMessageUtil {
public Object invoke(Message message) {
try{
MessageBroker broker = MessageBroker.getMessageBroker(null);
MessageService msgService = (MessageService)
broker.getService("message-service");
msgService.pushMessageToClients(message, true);
msgService.sendPushMessageFromPeer(message, true);
return null;
}catch(MessageException ff){
System.out.println("fff:="+ff.getErrorMessage());
catch(Exception e){
e.printStackTrace();
return message;
public void setMessage(String mess) {
try{
AsyncMessage message=new AsyncMessage();
message.setDestination("fdschat");
message.setBody(mess);
this.invoke(message);
}catch(Exception e){
e.printStackTrace();
mxml:
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="
http://www.adobe.com/2006/mxml"
creationComplete="consumer.subscribe()">
<mx:Script>
<![CDATA[
import mx.messaging.events.MessageEvent;
import mx.messaging.messages.AsyncMessage;
import mx.messaging.messages.IMessage;
private function send():void
var message:AsyncMessage = new AsyncMessage();
message.body = msg.text;
producer.send(message);
msg.text = "";
private function messageHandler(message:MessageEvent):void
var msg:AsyncMessage = AsyncMessage( message.message );
log.text += msg.body + "\n";
]]>
</mx:Script>
<mx:Producer id="producer" destination="fdschat"/>
<mx:Consumer id="consumer" destination="fdschat"
message="messageHandler(event)"/>
<mx:Panel title="Chat" width="100%" height="100%">
<mx:TextArea id="log" width="100%" height="100%"/>
<mx:ControlBar>
<mx:TextInput id="msg" width="100%" enter="send()"/>
<mx:Button label="Send" click="send()"/>
</mx:ControlBar>
</mx:Panel>
</mx:Application>

Question about redeploying a Project with multiple packages

I know that if I make changes to a single package within a project in SSIS 2012 that the entire project must be re-deployed. Also, I know that the project version is updated when it is re-deployed. My question
is about the packages in the re-deployed project that have not changed. Does anything actually change in the unaffected packages when only a single package is modified? Do the Identifiers for the all packages change or just the package
(or packages) that have been modified? I'd really like to hear from someone with actual experience with this issue.
Harold Jackson

Since you rebuild the version of the package gets incremented. No structural changes occur.
Arthur
MyBlog
Twitter

A few questions about replacing a PSU with few variations.

Similar Messages

Maybe you are looking for