A few questions and advice

Recently I swapped out my ADSL router modem for another, this caused all sorts of hassle so I put the old one back in. Since then I am having significant issues. Mostly with wireless.
As I had not changed the airport extreme (n) I do not know why the wireless became an issue. Basically my laptop connects to the network fine with full strength but web access and local network access is variable, between normal and dead slow. I am at a loss to explain it.
Another thing is that my ADLS modem is a draytek. And I currently have it set to DHCP and the airport to passthrough as this was what I was advised. Yet to my mind the airport extreme should take on the task of dishing out addresses as its got most things connected to it! Or put another way the draytek has one ethernet lead to the wan on the airport then from the airport my computers and a switch are connected.
Would it make more sense to allow the airport to dish out IPs, does it make any difference?
Any suggestions on what could have gone wrong on the wireless side would be most appreciated. For instance I was using Teleport just fine with it prior to the issue now Teleport has terrible troubles with frequent drop outs or losing control once its on the other mac leaving me with no mouse anywhere!
One other thing are there any tools I can use to diagnose issues on the network beyond looking forlornly at the wireless bar showing full strength.

um, no that does not seem to have fixed it after waking the macbook from sleep the speeds are rubbish again.
If anyone is reading would an archieve install on the macbook be worth considering. Wireless from the imac seems fine. I think someting has gone pear shaped on the macbook,

Similar Messages

A few questions and some things we found about Memory Management

We have been development a pretty complex RIA in flash; true
we probably should have used flex but we are very heavily invested
in flash and moving to flex was not really an option due to time
constraints and the learning curve associated with changing. That
reminds me are the Flex UI Objects going to be made available for
Flash CS3 I mean that advanced datagrid would be nice?
The application is a order processing and document
management system that has around 150 swf’s and I am posting
here to let people know what we found through our development and
testing cycles and also have a few questions that I am hoping
someone will at least point me in the right direction.
We were kind of disappointed to find that you could no
longer duplicate Movies and were forced to reload them if we wanted
different instances, but we got over that fast. Keeping this in
mind we decided to make as many dynamic screens as we could but
these turned out to be horribly time consuming. I mean sure we
could make the fields jump around like fleas on a dogs back (and it
was a great joke) but not very practical. So back to the IDE and
fla creation we went. This leads me to my first question has anyone
see heard of or thought about a SWF file reader that would read the
layout of a SWF and then generate the actionscript as output?
As we were developing we found that it was more complex, and
I think unnecessarily so, to get connected to a database. We use
ColdFusion as our “middleware” so it wasn’t to
bad and this leads me to my next question. Is there or has there
been any indication that Flex data services or well I guess BlazeDS
now is available for Flash CS3?
So we went on our merry little way and everything was going
great until testing this is when we started to see what kind of
memory flash really eats up. In the beginning our app would take up
a gig through the course of a day.
Any Class that we created we added a CleanUp method to it.
Yes we used weak listeners, yes we destroyed, and all references to
the main movies, and yes that was it the main movies.
Don’t be fooled the same way we were. The Garbage
collection simulation
http://www.adobe.com/devnet/flashplayer/articles/garbage_collection.html
does not really tell you the whole story. Even though if you cut
the line from the root the simulation suggests that the rest of the
objects that you have created within that object will be marked and
collected. Not so.
After much testing we found that if we wanted a full recovery
of memory the object and it’s sub objects and sub sub ojects
within arrays also with sub objects must be deallocated and then
assinged null to get full collection, I say full but really mean
between 90-95% reminds me of my C programming days.

We have been development a pretty complex RIA in flash; true
we probably should have used flex but we are very heavily invested
in flash and moving to flex was not really an option due to time
constraints and the learning curve associated with changing. That
reminds me are the Flex UI Objects going to be made available for
Flash CS3 I mean that advanced datagrid would be nice?
The application is a order processing and document
management system that has around 150 swf’s and I am posting
here to let people know what we found through our development and
testing cycles and also have a few questions that I am hoping
someone will at least point me in the right direction.
We were kind of disappointed to find that you could no
longer duplicate Movies and were forced to reload them if we wanted
different instances, but we got over that fast. Keeping this in
mind we decided to make as many dynamic screens as we could but
these turned out to be horribly time consuming. I mean sure we
could make the fields jump around like fleas on a dogs back (and it
was a great joke) but not very practical. So back to the IDE and
fla creation we went. This leads me to my first question has anyone
see heard of or thought about a SWF file reader that would read the
layout of a SWF and then generate the actionscript as output?
As we were developing we found that it was more complex, and
I think unnecessarily so, to get connected to a database. We use
ColdFusion as our “middleware” so it wasn’t to
bad and this leads me to my next question. Is there or has there
been any indication that Flex data services or well I guess BlazeDS
now is available for Flash CS3?
So we went on our merry little way and everything was going
great until testing this is when we started to see what kind of
memory flash really eats up. In the beginning our app would take up
a gig through the course of a day.
Any Class that we created we added a CleanUp method to it.
Yes we used weak listeners, yes we destroyed, and all references to
the main movies, and yes that was it the main movies.
Don’t be fooled the same way we were. The Garbage
collection simulation
http://www.adobe.com/devnet/flashplayer/articles/garbage_collection.html
does not really tell you the whole story. Even though if you cut
the line from the root the simulation suggests that the rest of the
objects that you have created within that object will be marked and
collected. Not so.
After much testing we found that if we wanted a full recovery
of memory the object and it’s sub objects and sub sub ojects
within arrays also with sub objects must be deallocated and then
assinged null to get full collection, I say full but really mean
between 90-95% reminds me of my C programming days.

Got my apple TV TODAY! few questions and my thoughts

After watching the keynote and seeing the new itunes rental system i decided to go out and buy the appletv... I wanted to jump the gun and get it before the update comes out... Anyways, few questions
1) I don't think this is possible but is there anyway to stream a DVD playing in my computer to apple TV? I understand Apple TV uses quicktime, and quicktime can't play DVD's so I am thinking it is not possible.. Am i correct? I really hope I am wrong on this one though ahaha.. I know i can rip then convert but that takes way too much time...
2) I have read conflicting answers to my next question, the apple support article states that you can already stream rentals from itunes to the appletv but that is not possible yet.. Am i correct? just want to make sure my appletv isn't messed up... According to the apple website the unit needs the upgrade so I assume I am right here too...
3) last, anything else i need to know or that you might think i would find useful when it comes to appletv??
I love apple and have been a long time apple user... Appletv didn't float my boat at first and was a pretty lame and expensive device i though... HOWEVER, take 2 seems to be a very nice step in the right direction.. FIRST, no monthly subscription fees like netflix and tivo while still being able to rent and pay as you go without using a computer (This netflix feature is coming late 2008 when their box releases).. I think i am going to love the new integration with web gallery!
There are still some features i would like to see in apple TV and i will be submitting feedback about them ocne the update releases, but this step and price drop warrants a purchase imo..

I had the same idea... I felt that 40 GB would be plenty especially b/c i plan to use it mostly for rentals... But it also gives me "Insurance" incase the appletv becomes huge after the update and apple decides to release a new generation in the next year or so or if i decide i actually do need more memory.. I won't feel as bad buying it knowing i only spent $229 on this one.. but i would be pretty upset with myself if i purchased the big model and never used the memory or if apple released a new generation in the next year....
BTW, if you purchase it at a reseller, make sure you take an apple add with you.. they may not have rolled the price back.. Circuit City was like that, i had to show the apple home page to get it for 229

Audigy platinum ex questions and advice - dual ouput or dual card - motherboard audio op has died

Hi all.
im new to the forums and would like some advice please.
i use my pc for mixing music and DJ'ing, but the problem that i have is that the onboard sound output has died. i need 2 intendant / separate sound outputs, one for preview, and one for main/live output.
Now, is it possible to configure a audigy platinum ex to provide the required outputs, and if so, how.
if this is not possible, can i use a soundblaster live card in the same pc to provide the required outputs, or as i suspect the answer is no to this due to shared file names within the drivers and such, is there a recommended card that i can use in conjunction with the audigy, or will any generic sound card do the job (for preview output).
i dont want to replace the motherboard and reinstall all the software at the moment, and i use mixmiester, fruityloops, reason and such for mixing/creating, and either mixmiester, tracktor, or pcdj fx for dj'ing.
many thanks in advance for your help and advice.
Adrian

mikiem ........... your a STAR.......
i didnt know that you could do that.....using the AISO driver allows access to all sorts of outputs..........when i have time im going to have to see what they all do, and what else is available, but the biggest thing is that it has sorted out some of my immediate problems......
i will need to go through all the software to see if i can get access to these outputs from it all, but it definitely works with mixmiester, so i dont need to re plot all the files.
just so that people know, i set the audigy speaker config to 4.0/4.1 in THX setup, and then looked in the advanced audio output section of mixmiester (under output config) and presto....2 independent audio outputs.
dont suppose that anyone knows where to get a complete and detailed manual for what all the software and hardware does and how to configure it all........
HUGE thanks mikiem........

A few questions and comments about the 2010 MBP i7

Hi! I'm pretty new to owning a Mac computer and I actually always wanted one. I bought the top of the line Macbook Pro 15" i7 8GB, 500GB SSD notebook. I have a couple of questions on its usage.
1) Overheating is a big issue. Many people noticed overheating with the i7 MBP. Temperatures range from 38C to 60C when using iTunes/Safari/Word. Temperatures shoot to the 70C-85C when playing games. Once you hit the 70C mark, the notebook part above the keyboard is pretty hot. However, I wouldn't care if it doesn't damage my computer so my question is, will 85C temperatures damage a Macbook Pro?
2) Screen Scratching: Do MBP screens scratch easily? I have quite a few fingerprints a day on the screen but is it like the iPod Touch anti-scratch screen?
3) Freezing: I've been having the MBP for 2 weeks now and my MBP has frozen twice. It wasn't because of the heat but Finder wasn't responding and I could not force quit. However, it worked after 30 seconds. Does this happen often and will it be a long-term issue?
Even after the overheating issue, Macs are still better than PCs. It's so much easier and neat than a PC.
5) Do you guys have any tips to using a Mac? Any accessories?
6) I installed SMC Fan Control. If I set it to 6000 rpm, will there be any significant damage to the fans? Are the fans durable?
Thank you all for the help!
Message was edited by: kevinzhengli

Just came across this thread while looking for info on the newest MBPs, and their (lack of) ability to cool themselves. Wanted to throw my 2c in.
I have to strongly disagree with the recommendation to not install fan control software. I have an early 2008 MBP, and I frequently play video games and encode video. When left to defend itself, I have witnessed the CPU temp reach 202 F. Sorry, but that's totally unacceptable, and I manually adjust the fans to mitigate the heat.
After 2 years of this, I am convinced the excess heat has harmed my system. It's very disappointing to hear that the new models still have problems with heat.

Mac mini questions and advice.

i'd like to eventually purchase a mac mini, but is the apple care protection plan worth it??? sorry multiple questions will a fully loaded mac mini 160 gb hard drive and 2 gigs of ram be an improvement over my current set up... pentium 4, 1.60 GHz.... 1.59 GHz, 512 mb of ram... 70.2gb hard drive
one more question, will there be any trouble hooking up the mac mini to my 32 inch sony lcd.
sorry for all the questions, would appreciate any advice and feedback.

Can you give us the model number of your 32 inch Sony lcd? The Mini supports resolutions up to 1920x1200. We need to find out what kind of beast your 32 inch Sony is; it sounds kinda big for a regular monitor -- more like a TV display.
Hard to say if the Mini will be an improvement over your PC, unless we know what programs you want to run. It would obviously be an improvement in term of security; you won't be worrying about keeping virus definitions up-to-date every week.
I use a KVM switch to run my Mini and a PC with an IBM keyboard and a Dell LCD monitor. I had to experiment with several models of KVM to find one I liked.
I also use Parallels to run Windows and Linux directly on my Mini at the same time I run Mac OS. Useful for work-flows that require Mac and WinXP/Linux programs simultaneously.
You can buy and register AppleCare anytime during your first year of ownership. AppleCare gives you access to phone support, which might be useful to a first-time Mac user. You can buy AppleCare for less from some on-line retailers -- for example google for lacomputercompany. Be sure you buy the correct AppleCare for your Mac.
Wireless generally works fine, though some non-apple wifi routers with old firmware have issues. In instances of range or compatibility problems, often a wireless ethernet bridge can solve the problem. These are inexpensive and involve no software, since they plug into the mini's ethernet port.
If you are doing massive one-time file transfers, I'd strongly recommend connecting your Mini directly via ethernet cable to your router. This will save time and eliminate several possible sources of trouble. Save the wifi for your web interactions after you transfer the bulk of files from your PC.
Regarding pictures and music ... if they are in standard formats like mp3 and jpg, then iTunes and iPhoto should be able to import them just fine. If the music is protected by Microsoft's "plays-for-sure" digital rights management scheme, you may be out of luck. If your music is already in iTunes for Windows, also no problem.
Although you didn't ask, at some point you may need external storage for your Mini. Be sure to get an external drive that supports Firewire. This is preferable to drives that just support USB, though you can get models that support both. Firewire will be significantly faster and more reliable with your Mac.

Setup question and advice for Lightroom 4.1

Hi,
I'm upgrading from LR 3.6 to LR 4.1 on my Windows 7 laptop with 8 gigs ram. I need to free up space on my internal hard drive, so I'm moving my images to a 1T external hard drive, connected via usb 2.0 unfortunately.
question 1: Does it matter in what order I do the above? In other words, should I do the upgrade to 4.1 first and then move my images/catalogue to the external hard drive or should I move my images and then upgrade?
I've heard talk about how LR 4.1 is slower than LR 3.6, so I'm, a little worried about performance.
quesiton 2: Does anyone have an specific advice about configuring LR for best performance considering my files will be stored on external hd via USB 2?
(I only use this computer for web surfing and imaging programs. Besides LR, I also run Camera Raw, PS CS 5, and Premiere Elements. I was thinking about making two catalogues- still images which I would move to the ext hd and movie clips which I would keep on the internal hd. Does that make sense? )
thanks in advance,
D

ziggycat4 wrote:
Hi,
I'm upgrading from LR 3.6 to LR 4.1 on my Windows 7 laptop with 8 gigs ram. I need to free up space on my internal hard drive, so I'm moving my images to a 1T external hard drive, connected via usb 2.0 unfortunately.
question 1: Does it matter in what order I do the above? In other words, should I do the upgrade to 4.1 first and then move my images/catalogue to the external hard drive or should I move my images and then upgrade?
Doesn't matter, as long as you do it properly
I've heard talk about how LR 4.1 is slower than LR 3.6, so I'm, a little worried about performance.
quesiton 2: Does anyone have an specific advice about configuring LR for best performance considering my files will be stored on external hd via USB 2?
It is slower for some people, and not slower for other people. I don't think anyone in these forums has figured out what the reason is for slowness on some computers. The only thing you can do is try it on your computer. By the way, as far as I have read, the performance problems in Lightroom are not related to USB 2.
(I only use this computer for web surfing and imaging programs. Besides LR, I also run Camera Raw, PS CS 5, and Premiere Elements. I was thinking about making two catalogues- still images which I would move to the ext hd and movie clips which I would keep on the internal hd. Does that make sense? )
Nope, multiple catalogs doesn't make sense to me. You are just reducing your efficiency by having multiple catalogs here. One catalog is easier, that way you never have to switch back and forth, you never wind up importing into the wrong catalog, you can search across all your photos and videos, etc. One catalog is the way to go.
By the way, did I mention that one catalog is the right way to go? Because if I didn't mention it, let me state that one catalog is the way to go.

Hello I have a few questions and I need some help with my iTunes and iPod

Hello iTunes people.
I have a little problem with my iTunes. I actually almost know nothing about iTunes really. But I have had a 80 gig ipod .. ummm I think it's a iPod classic maybe. A long time ago I just downloaded iTunes. I think one of my tech friends already had put the program onto my PC so I did not even have to download it. Anyways I put my life's collection of mp3's onto iTunes and then syncs it with my iPod and it worked great. Here is my problem. I just recently bought a MONSTER PC. I have lovingly named it " ED209 " I downloaded iTunes for it and I have the most up to date version.8.1.1 is the most current version correct? Ok well here is my problem. What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library. I DO NOT want to import anything from the library or playlist or whatever you call it ONTO the iPod because there is nothing in the library. Now this is were its gets weird and possibly silly. A person I was chatting with on Facebook sort of made fun of me because she was like " Dude! Just push " Sync " But the reason I am paranoid is because THIS is the message I get....
" The iPod " Aaron's iPod " is synced with another iTunes library. Do you want to erase this ipod and sync with this iTunes library? "
HOLY COW!! That girl on Facebook was making fun of me but READ THAT. That exactly says ERASE the "iPod" and Sync with THIS library " It does not say put what is ON the iPod into THIS Library. It says it the other way around. Clear as day it says it will ERASE the " Ipod " it does not say " Fill the library with whats on your iPod "
Do I all of a sudden not understand English or something???? I know how to freaking read and from what it says is sounds a 100 percent like " we will ERASE youe iPod and put everything from this playist or library onto your iPiod" But there is NOTHING in my library? Am I mentally challenged or what?
I hope someone can help me here and I have another request. Could someone just tell me all the cool things I can do with iTunes and my iPod? I am trying to read the help files and the FAQ and whatever else Apple provides you with but it has SO MUCH crap that looks usless. I find myself reading a whole paragraph about some simple little section of s section of a section of a feature! Know what I mean. Someone give me the long and short of the neat things I can do with this stuff. I have windows Vista with a wicked computer that has like 6 gigs of ram and m iPod is a 80 GB Classic
help !!
PROTEUS

*What I want to do is I want to put everything that is currently on my iPod ONTO the iTunes library.*
1). Connect your iPod to your computer. When you get the message that it is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all the songs from your iPod.
2). When your iPod appears in the iTunes source list change the update setting to manual, that will let you continue to use your iPod without the risk of accidentally erasing it. Check the "manually manage music and videos" box in Summary then press the Apply button. Also when using most of the utilities listed below your iPod needs to be enabled for disc use, changing to manual update will do this by default: Managing content manually on iPod and iPhone
3). Once you are connected and your iPod is safely in manual mode there are a few things you can do to restore your iTunes from the iPod. iTunes will only let you copy your purchases directly from an iPod to the computer, you'll find details in this article: Copying iTunes Store purchases from your iPod or iPhone to a computer
For everything else (music from CDs, other downloads and including iTunes purchases) there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. You can read reviews and comparisons of some of them here:
Wired News - Rescue Your Stranded Tunes
Comparison of iPod managers
A selection of iPod to iTunes utilities:
TuneJack Windows Only (iPhone and iPod Touch compatible)
SharePod Windows Only (iPhone and iPod Touch compatible)
iPod2PC Windows Only
iDump Windows Only
YamiPod Mac and Windows
iPod Music Liberator Mac & Windows
Floola Mac & Windows
iPodRip Mac & Windows (iPhone and iPod Touch compatible)
iPod Music Liberator Mac & Windows (iPhone and iPod Touch compatible)
Music Rescue Mac & Windows (iPhone and iPod Touch compatible)
iGadget Mac & Windows (iPhone and iPod Touch compatible)
iRepo Mac & Windows (iPhone and iPod Touch compatible)
iPod Access Mac & Windows (iPhone and iPod Touch compatible)
TouchCopy Mac & Windows (iPhone and iPod Touch compatible)
There's also a manual method of copying songs from your iPod to a Mac or PC. The procedure is a bit involved and won't recover playlists but if you're interested it's available on page 2 at this link: Copying Content from your iPod to your Computer - The Definitive Guide
4). Whichever of these retrieval methods you choose, keep your iPod in manual mode until you have reloaded your iTunes and you are happy with your playlists etc then it will be safe to return it auto-sync.
5). I would also advise that you get yourself an external hard drive and back your stuff up, relying on an iPod as your sole backup is not a good idea and external drives are comparatively inexpensive these days, you can get loads of storage for a reasonable outlay: Back up your iTunes library by copying to an external hard drive

I have a few questions and I want an apple tv

Ok I am thinking of getting the 160 GB apple TV model. My brother and I are going to ditch our cable DVR it's too expensive and we're thinking of getting the appleTV to replace it. So here's one of my questions if I hook it up to the tv in our living room we have a wifi router hooked to our computers. do we just need to log into our seperate itunes accts to access our content or do we need to create a joint acct just for the TV? Secondly if we have basic cable running thru the AppleTV can we record our shows onto the apple tv hardrive or is it just specific to itunes stuff? All replies welcome I have a 1st generation iphone which is great it well got me hooked on apple stuff I don't know why I waited so long.

Thank you for your confirmation of my earlier post....
To be quite honest about it, I rarely read more than the first couple of sentences of your rather long-winded comments.
...can you suggest a PC compatible hardware device that does what the the eyetv does for us mac users for the person asking the question.
There is a veritable cornucopia of video capture devices available for PCs. I'm sure he'll find enough to make his head swim if he does a keyword search at Amazon.
(sorry couldn't resist - I understand you are quite appreciative of humour)
That's true, almost as much as you are adept at paraphrasing the answers of others and garnering points from them.

A few Questions and opinions

Ok, I'm looking at getting a mac mini, as a replacement fora jaded old Tiny PC. Im basically wondering whether the mac mini is substantial for my needsa nd whether anyone ahs any problems or opinons on them. Basically i need a small home computer which will be used simply for the internet, microsoft office, and perhaps something like football manager 2007. Will the mac mini be able cope with this?
thanks

This question comes up quite regularly, and in response I think the most important thing to say is that one has to be careful not to mistake the size of the Mac mini as any indication of it's performance. Inside that small package is a fully-fledged desktop computer which in most respects comes close to equalling the performance and power of the top of the range Mac from just 2 or 3 years ago.
It suffers two limitations in my view. The first is not so much the system itself as it is the current state of software, because like every other Intel-based Mac, the fact is that at present, a number of the most common applications are still not written to run natively on Intel processors. As a result they run, but require the use of an on-the-fly translator to convert them from PPC to Intel code. Rosetta, the translator, is provided as part of the OS but requires a lot of memory and as would be expected, doesn't generally run particularly quickly. To use software such as the current version of MS Office, Adobe Photoshop etc, it would be wise to add as much RAM to the system as possible (the max is 2Gb) to allow 'room' for Rosetta to work. Intel versions of these packages, including MS Office, are due next year.
The second is a relatively slow hard drive. The drive is, in fact, the same as those used in the laptop models, and runs at 5400rpm. It doesn't really impact greatly on system performance except at times when there is significant drive activity. The system can be improved once again by increasing RAM since this helps reduce the background 'paging' activity (reading and writing to virtual memory) but when dealing with large data files, system performance will always be limited to some degree by the performance of the drive.
Fortunately the first issue can be resolved by sticking entirely to Intel-native applications, which means that if you need an MS Office compatible package, you can actually avoid the current (non native) Office by downloading Neo Office, which is Open Source and Intel Native. It's not as elegant as the Intel native Microsoft product promises to be when it is released, but it works and at the very least should tide you over until MS release their software.
Otherwise, a Mac mini is capable of a lot more than basic tasks. I have a number of them in use in networks I manage and their users are very happy with them, including one user who uses his for complex video editing and production.
These are remarkable little systems that seem to rarely disappoint.

New few scenarios and advice to work in a project

Guys,
I got certified in XI in 2007 teched, but i never worked practically in any project.
Now i am willing to work in a XI project.
So for that I would like to know what kind of scenarios i have to do to get confidence and practicall knowledge on XI and get selected in Client interviews.
As i am certified i am confident about the theoritical knowledge.
i have already done FILE TO FILE scenario.
Planning to do IDOC-FILE.
Guys plz suggest me so that i can be part of XI project.
Suggest me how do i proceed ,what scenarios i have to take up ...:)
Good suggestions will be surely awarded..
Cheers

hi
as you are certified do practice on the following scenarios:
SAP XI INTRODUCTION
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part I
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part II
Aspirant to learn SAP XI...You won the Jackpot if you read this!-Part III
http://www.erpgenie.com/sap/netweaver/xi/namingconventions.htm
http://www.erpgenie.com/sap/netweaver/xi/howto.htm
http://www.erpgenie.com/sap/netweaver/xi/tips.htm
http://www.erpgenie.com/sap/netweaver/xi/xiauthorizations.htm
https://www.sdn.sap.com/irj/sdn/wiki
Interfacing to XI from Webdynpro
Understanding message flow in XI
Ready Reference for XI Developers
Message Mapping
Message Mapping Simplified - Part I
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/frameset.htm
New functions in the Graphical Mapping Tool XI 3.0 SP13
File Content Conversion for Multi Hierarchical Structure
Message Splitting Using the Graphical Mapping Tool
Number formatting to handle LARGE Numbers
Optimizing Lookup's in XI
Minimize memory usage during Message Mapping when replicating an element
Mapping Context Changes in XI
/people/jeyakumar.muthu2/blog/2005/12/19/data-mining-using-apriori-algorithm-in-xi-150-part-ii
/people/jeyakumar.muthu2/blog/2005/11/23/data-mining-using-apriori-algorithm-in-xi-150-part-i
/people/jeyakumar.muthu2/blog/2005/12/30/data-mining-using-apriori-algorithm-in-xi-150-part-iii
Java Mapping to handle flat files in SAP XI
xpath functions in xslt mapping
"JAVA MAPPING", an alternate way of reading a CSV file
B2B Mapping Techniques Using the Graphical Mapping Tool
Duplicating Subtrees and Numbering Them Using the Graphical Mapping Tool
How to parse "XX/YY/ZZ;AA/BB/CC;11/22/33" in message mapping.
Introduction to queues in message mapping
Handling of Mixed Content Element in XI
The specified item was not found.
The specified item was not found.
ValueMapping using the Graphical Mapping Tool
Accessing Value Mapping defined in Directory using Java functions
Comparing Performance of Mapping Programs
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
Runtime WorkBench Monitoring
XI CCMS Alert Monitoring : Overview and Features
The specified item was not found.
The specified item was not found.
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm
The specified item was not found.
The specified item was not found.
The specified item was not found.
The specified item was not found.
XI : How to Re-Process failed XI Messages Automatically
BPM
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/integrationProcess%28ccBPM%29inXI&
Walkthrough with BPM
Reconciliation of Messages in BPM
RFC Scenario using BPM --Starter Kit
The specified item was not found.
Schedule Your BPM
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
Sync/Async scenarios without BPM
Sync/Async communication in JMS adapter without BPM (SP19)
IDOCs (Multiple Types) Collection in BPM
/people/jin.shin/blog/2006/02/07/multi-mapping-without-bpm--yes-it146s-possible
File to File Scenario
Step by Step Guide: XML File 2 XML File Scenario: Part I
Step by Step Guide: XML File 2 XML File Scenario: Part II
Converting XML to PDF using XI
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1)
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2)
"JAVA MAPPING", an alternate way of reading a CSV file
Dynamic File Name using XI 3.0 SP12 Part - I
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II
Push Data to MVC Architectured application using XI
How to send any data (even binary) through XI, without using the Integration Repository
XI in the role of a FTP
The specified item was not found.
The specified item was not found.
The specified item was not found.
The specified item was not found.
IDOC Scenario
Introduction to IDoc-XI-File scenario and complete walk through for starters.
Troubleshooting File-to-IDOC Scenario in XI.
Convert any flat file to any Idoc-Java Mapping
IDOCs (Multiple Types) Collection in BPM
Outbound Idoc's - Work around using "Party"?
Troubleshooting File-to-IDOC Scenario in XI.
RFC Scenario
Exposing BAPI as Web Services through SAP XI
RFC Scenario using BPM --Starter Kit
The specified item was not found.
The specified item was not found.
HTTP to RFC - A Starter Kit
regards
kummari
Edited by: kummari on Jul 2, 2008 10:52 AM

3 important question and advice to Nokia center fo...

In 5800 : 1- How can we capture multiple images with interval time ?
2- How can we connect 5800 in to adhoc to laptop internet ?
3- can we have more than 4 shortcut on screen?
These are important and usefull if nokia update them in future Updates.

fsalami wrote:
In 5800 : 1- How can we capture multiple images with interval time ?
2- How can we connect 5800 in to adhoc to laptop internet ?
3- can we have more than 4 shortcut on screen?
These are important and usefull if nokia update them in future Updates.
1, Sequence mode. Its there in v21, not entirely sure if it was visible before or not.
2. Not tried this yet.
3. Nope..

A few questions about common "issues" before buying New iPad

I am hoping to pick up the new iPad in the next few weeks, however I have read up on some issues which I'd like some information on.
I have been using my GF's iPad 2 a lot and I really love it, however I am dead set on buying the new one, I have become pretty resolution-spoilt by the awesome screen on the 4S and this is the primary factor in wanting this new model.
With the following concerns, assuming that an iPad that I may buy might have one or more of them, could you please inform me of: any currently known official or unofficial fix, if the problem could most likely be resolved in an update or if it is likely that since the problem came to light that the later runs to be built were adjusted to avoid the problem? Thanks.
OK- first up, the bad wifi problem that people have. This is the biggest concern to me, as I use wifi a lot and won't have access to 4G, and only occasionaly access to 3G.
Secondly, the heating... OK this is not a deal breaker, I understand that it isn't a real problem however if it could be solved so that it runs almost as cool as the 2 that would be great.
Thirdly, charge times and the extra hour over 100%... Again I do realise that these aren't so much issues as just the way that it works, however I would hope that now lots of people have complained, an update would adjust the display to be more accurate, to say 100% only when it has fully charged, purely because I would rather know... Or perhaps have 100% change colour on absolute 100%. The other thing, 7 hours charging, is there a more powerful adaptor that 1: reduces the charge time, and 2: if you are using a powerdrinking app while charging, will actualy continue charging rather than just slowing the battery drain (I read that some apps will keep draining battery while on charge).
finaly, I have read about screen hue problems, this wont be too much of a problem, as I will be able to check this in store to be sure that the screen is nice, colour balanced and free of dead pixels, I will compare it to my GFs iPad 2 and also the iPhone 4, because I know that the iPad 2 is supposed to look a little more blue to give it a cold feel, while the new model and the iPhone 4S have a slightly yellowed screen for warmth, it's just that lots of people have complained about theres' being too yellow.
Thanks very much for any useful info on this.

What are all the differences between the iPad 3rd Gen and the iPad 2? Is the iPad 2 worth the cost savings?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -2012-ipad-2-2011.html
What are all the differences between the iPad 3rd Gen models? Which should I buy?
http://everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd-gen -early-2012-models.html
Should I Buy a New iPad? Or an iPad 2?
http://www.maclife.com/article/blogs/should_i_buy_new_ipad_or_ipad_2
iPad Q&A
http://www.everymac.com/systems/apple/ipad/ipad-faq/differences-between-ipad-3rd -gen-early-2012-models.html
A Few Questions (and Answers) About the New iPad
http://pogue.blogs.nytimes.com/2012/03/15/a-few-questions-and-answers-about-the- new-ipad/?ref=personaltechemail&nl=technology&emc=edit_ct_20120315
New iPad: A Polishing of the Old
http://www.nytimes.com/2012/03/15/technology/personaltech/the-new-ipad-is-much-t he-same-only-better.html?nl=technology&emc=edit_ct_20120315
iPad 1, 2 and New Specifications
http://www.everymac.com/systems/apple/ipad/index-ipad-specs.html
If you think you may get an iPad 2:
Refurbished iPad Prices
http://store.apple.com/us/browse/home/specialdeals/ipad
New 16GB iPad 2 Prices
http://store.apple.com/us/browse/home/shop_ipad/family/ipad/select_ipad2
A lot of the posts about lack of charging is because iPad "3" users are trying to use an iPod charger, iPhone charger or connected to their computer where they get the "Not Charging" indication. A few others had a defective charger that was replaced by Apple. It remotely possible that a few iPads have defective batteries or charging circuits.
Many of the wifi connection problems are related to the users brand of wireless routers, the router setup, or the need to select a different wireless channel due to interference.
The high temp problem seems to be when users are charging AND running games with intensive graphics. The display on the new iPad takes a lot more power than the iPad 2 display.
Overall I would guess that the chance of a defective iPad is less than 1%.
 Cheers, Tom

Few questions about Satellite A300D-14P functionality

I have model Satellite A300D-14P for one month. Warranty 2 yrs. I have few questions, and asking for help, and suggestions what I should do?
*My camera quality * is VERY poor, Only with very much light on, I can get generally ok picture quality. Indoor, beside turned on both options, night mode or backlight compensation I hardly can see my face, very dark and poor quality. Second problem is blue led light, it is annoying because half of picture is always blue, somehow that light taking half picture which is always blue:((( I used notebook model from L300 series ( cheaper than mine) with same camera and that blue light, it is working perfectly :(
*Battery life and start up Vista OS*? ??In power save mode hardly 1.5h ??? Just surfing and nothing else....I asked Toshiba support here in Serbia about that and they told me that it is normal, and measuring of battery life (2, ...h) by specifications, is when my display is off and computer don't do anything ??? They also told me that normal start up time for Vista OS is around 1.45min maybe more???
If I install win XP is it possible to get battery life longer?
Do I need to go in Toshiba service or what?
Thank you very much and sorry if I am boring :))))
Nikola

Hay Nikola
You are not boring at all and welcome on this forum.
I don't know where to start. ;).
I have Satellite A300-1LI in front of me and I use it about a month now. Start-up time is very interesting theme and with right configuration you can optimise it and make it much shorter as with factory setting. Please read one very interesting thread about it under http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=134947
Do the same with your Satellite and I hope you will be satisfied.
Battery running time? I must say that information about two hours is realistic and I can confirm it. The same on my Satellite. But to be honest for mobile computing it is OK. I have changed several notebooks and just business notebook Tecra has had linger battery running time. What you can do is to check Toshiba support site and pick up info about more powerful battery. I am not sure but you can use Battery Pack (Li-Ion, 9 Cell, 6000mAh).
About cam I cannot say much. On my Satellite it works OK and I am satisfied. OK the quality is not the same like on good external webcams but for integrated cam it is OK.
If you are not satisfied try to talk with nearest service or try to compare it with some other Satellite by your local dealer.
So Nikola, if you have more questions please post again.

A few questions from someone new to Aperture (and DSLR photography)

Hi - I have just got my first DSLR camera (A Nikon D3000) and am trying out Aperture 3. I had a few questions which aren't all just necessarily Aperture related:
I have imported my library from iPhoto, however now all my albums are in alphabetical order, rather than date created. I only seem to have the option to arrange my albums by, "Kind", "Name" or "Manual". Any idea how I restore the date created order?
This may be too large a subject for here (I should probably buy a book on the subject), however JPEG, NEF and TIFF - I am shooting in raw mode which is generating NEF files. I had tried RAW+JPEG, but the basic JPEG this creates is really quite poor. The NEF files are generally around 7-12Mb. If I open them for editing in Photoshop, a TIFF file is generated in Aperture which looks to be over 8x the size of the original raw file, sometime over 100Mb. I then seem to be able to save it back as a JPEG at pretty much maximum quality which results in a file slightly smaller than the original raw file. Is it necessary to keep the large TIFF files once I've created a jpeg? Am I best off just keeping the finished jpeg and the original raw file in case I want to make changes?
When publishing to flickr, It would be good to be able to just publish the latest versions of all photos in an album. ie not the same photo in tiff, nef and jpg format. Is there an easy way to do this, or is it a case of manually picking each one?
Also - When uploading NEF files to flickr it would appear to convert them to jpg, which is kind of good I suppose, but does anyone know what level of quality the jpegs created are? Am I best off converting them to jpeg myself first and then uploading? If I did this then my albums would be full of duplicates in different formats, which leads back to my previous question about uploading just one version of each. That may be a question for the flickr forum...

You have jumped into the deep end with both feet.
With Aperture running select the single the Browser and you will find the sort controls under the Mobileme to New Smart Album icons depending on how stretched out you have the Inspector panel. There is the ability to sort by just about every parameter there either ascending or descending.
Can Aperture not convert your NEF files? You dont have to have Tiff files at all. See your Preferences regarding External Editor. How much storage space and your archiving requirements will influence your decision about retaining Tiff files.
I know nothing about Flickr but assume you will have to choose your own images. I doubt a Smart Album can select exactly what you need.
When uploading files online galleries generally optimise the images. You are wasting your time uploading massive Tiffs IMHO. Most web services work with jpegs I understand. Consult the Flickr help and support for their requirements and advice.
Enjoy your new hobby.
AW
Whether you have the room to save Tiff files as well as Raw files will probably decide whether you keep them or not.

A few questions and advice

Similar Messages

Maybe you are looking for