A few seconds after start the GDM mouse stops working
After today's update I have the following problem: a few seconds after start the GDM mouse stops working. XDM doesn't work.
Edited: Mouse works. Only pointer does not move.
lscpi says:
00:02.0 VGA compatible controller: Intel Corporation 82946GZ/GL Integrated Graphics Controller (rev 02)
gdm says:
usb 2-2: new low speed USB device using uhci_hcd and address 4
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6
generic-usb 0003:04B3:310C.0003: input,hidraw1: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-2/input0
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1071 at 650, next 1076)
(this line is repeated several times:)
[drm:i915_do_wait_request] *ERROR* something (likely vbetool) disabled interrupts, re-enabling
[drm:i915_hangcheck_elapsed] *ERROR* Hangcheck timer elapsed... GPU hung
[drm:i915_do_wait_request] *ERROR* i915_do_wait_request returns -11 (awaiting 1079 at 650, next 1080)
[drm:i915_reset] *ERROR* GPU hanging too fast, declaring wedged!
[drm:i915_reset] *ERROR* Failed to reset chip.
/var/log/Xorg.0.log says:
[ 23.129]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 23.129]
X.Org X Server 1.9.3.901 (1.9.4 RC 1)
Release Date: 2011-01-07
[ 23.129] X Protocol Version 11, Revision 0
[ 23.129] Build Operating System: Linux 2.6.36-ARCH i686
[ 23.129] Current Operating System: Linux mariuszch 2.6.37-ARCH #1 SMP PREEMPT Sat Jan 29 19:40:04 UTC 2011 i686
[ 23.129] Kernel command line: root=/dev/disk/by-uuid/3e82e71b-7de4-406d-8da9-8101fe4a713f ro i915.modeset=1
[ 23.129] Build Date: 08 January 2011 11:27:31PM
[ 23.129]
[ 23.130] Current version of pixman: 0.20.2
[ 23.130] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 23.130] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 23.131] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 31 09:24:08 2011
[ 23.163] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.206] (==) No Layout section. Using the first Screen section.
[ 23.206] (==) No screen section available. Using defaults.
[ 23.206] (**) |-->Screen "Default Screen Section" (0)
[ 23.206] (**) | |-->Monitor "<default monitor>"
[ 23.206] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.206] (==) Automatically adding devices
[ 23.206] (==) Automatically enabling devices
[ 23.260] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.260] Entry deleted from font path.
[ 23.295] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.295] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.295] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.295] (II) Loader magic: 0x81f3160
[ 23.295] (II) Module ABI versions:
[ 23.295] X.Org ANSI C Emulation: 0.4
[ 23.295] X.Org Video Driver: 8.0
[ 23.295] X.Org XInput driver : 11.0
[ 23.295] X.Org Server Extension : 4.0
[ 23.296] (--) PCI:*(0:0:2:0) 8086:2972:17aa:1015 rev 2, Mem @ 0xd0000000/1048576, 0xc0000000/268435456, I/O @ 0x000018c0/8
[ 23.296] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 23.296] (II) LoadModule: "extmod"
[ 23.306] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.314] (II) Module extmod: vendor="X.Org Foundation"
[ 23.314] compiled for 1.9.3.901, module version = 1.0.0
[ 23.314] Module class: X.Org Server Extension
[ 23.314] ABI class: X.Org Server Extension, version 4.0
[ 23.314] (II) Loading extension MIT-SCREEN-SAVER
[ 23.314] (II) Loading extension XFree86-VidModeExtension
[ 23.314] (II) Loading extension XFree86-DGA
[ 23.314] (II) Loading extension DPMS
[ 23.314] (II) Loading extension XVideo
[ 23.314] (II) Loading extension XVideo-MotionCompensation
[ 23.314] (II) Loading extension X-Resource
[ 23.314] (II) LoadModule: "dbe"
[ 23.314] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.320] (II) Module dbe: vendor="X.Org Foundation"
[ 23.320] compiled for 1.9.3.901, module version = 1.0.0
[ 23.320] Module class: X.Org Server Extension
[ 23.320] ABI class: X.Org Server Extension, version 4.0
[ 23.320] (II) Loading extension DOUBLE-BUFFER
[ 23.320] (II) LoadModule: "glx"
[ 23.320] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 23.337] (II) Module glx: vendor="X.Org Foundation"
[ 23.337] compiled for 1.9.3.901, module version = 1.0.0
[ 23.337] ABI class: X.Org Server Extension, version 4.0
[ 23.337] (==) AIGLX enabled
[ 23.337] (II) Loading extension GLX
[ 23.337] (II) LoadModule: "record"
[ 23.338] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 23.338] (II) Module record: vendor="X.Org Foundation"
[ 23.338] compiled for 1.9.3.901, module version = 1.13.0
[ 23.338] Module class: X.Org Server Extension
[ 23.338] ABI class: X.Org Server Extension, version 4.0
[ 23.339] (II) Loading extension RECORD
[ 23.339] (II) LoadModule: "dri"
[ 23.339] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 23.347] (II) Module dri: vendor="X.Org Foundation"
[ 23.347] compiled for 1.9.3.901, module version = 1.0.0
[ 23.347] ABI class: X.Org Server Extension, version 4.0
[ 23.347] (II) Loading extension XFree86-DRI
[ 23.347] (II) LoadModule: "dri2"
[ 23.348] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 23.351] (II) Module dri2: vendor="X.Org Foundation"
[ 23.351] compiled for 1.9.3.901, module version = 1.2.0
[ 23.351] ABI class: X.Org Server Extension, version 4.0
[ 23.351] (II) Loading extension DRI2
[ 23.351] (==) Matched intel as autoconfigured driver 0
[ 23.351] (==) Matched vesa as autoconfigured driver 1
[ 23.351] (==) Matched fbdev as autoconfigured driver 2
[ 23.351] (==) Assigned the driver to the xf86ConfigLayout
[ 23.351] (II) LoadModule: "intel"
[ 23.352] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 23.408] (II) Module intel: vendor="X.Org Foundation"
[ 23.408] compiled for 1.9.3, module version = 2.14.0
[ 23.408] Module class: X.Org Video Driver
[ 23.408] ABI class: X.Org Video Driver, version 8.0
[ 23.408] (II) LoadModule: "vesa"
[ 23.408] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.414] (II) Module vesa: vendor="X.Org Foundation"
[ 23.414] compiled for 1.9.0, module version = 2.3.0
[ 23.414] Module class: X.Org Video Driver
[ 23.414] ABI class: X.Org Video Driver, version 8.0
[ 23.414] (II) LoadModule: "fbdev"
[ 23.425] (WW) Warning, couldn't open module fbdev
[ 23.425] (II) UnloadModule: "fbdev"
[ 23.425] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 23.426] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 23.426] (II) VESA: driver for VESA chipsets: vesa
[ 23.426] (++) using VT number 7
[ 23.435] (WW) Falling back to old probe method for vesa
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 23.435] drmOpenDevice: node name is /dev/dri/card0
[ 23.435] drmOpenDevice: open result is 8, (OK)
[ 23.435] drmOpenByBusid: drmOpenMinor returns 8
[ 23.435] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 23.435] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 23.435] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 23.435] (==) intel(0): RGB weight 888
[ 23.435] (==) intel(0): Default visual is TrueColor
[ 23.436] (II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
[ 23.436] (--) intel(0): Chipset: "946GZ"
[ 23.436] (**) intel(0): Tiling enabled
[ 23.436] (**) intel(0): SwapBuffers wait enabled
[ 23.436] (==) intel(0): video overlay key set to 0x101fe
[ 23.520] (II) intel(0): Output VGA1 has no monitor section
[ 23.587] (II) intel(0): EDID for output VGA1
[ 23.587] (II) intel(0): Manufacturer: SAM Model: 594 Serial#: 1297691186
[ 23.587] (II) intel(0): Year: 2010 Week: 1
[ 23.587] (II) intel(0): EDID Version: 1.3
[ 23.587] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 23.587] (II) intel(0): Sync: Separate Composite SyncOnGreen
[ 23.587] (II) intel(0): Max Image Size [cm]: horiz.: 44 vert.: 30
[ 23.587] (II) intel(0): Gamma: 2.20
[ 23.587] (II) intel(0): DPMS capabilities: Off; RGB/Color Display
[ 23.587] (II) intel(0): First detailed timing is preferred mode
[ 23.587] (II) intel(0): redX: 0.646 redY: 0.339 greenX: 0.290 greenY: 0.603
[ 23.587] (II) intel(0): blueX: 0.145 blueY: 0.070 whiteX: 0.312 whiteY: 0.329
[ 23.587] (II) intel(0): Supported established timings:
[ 23.587] (II) intel(0): 720x400@70Hz
[ 23.587] (II) intel(0): 640x480@60Hz
[ 23.587] (II) intel(0): 640x480@67Hz
[ 23.587] (II) intel(0): 640x480@72Hz
[ 23.587] (II) intel(0): 640x480@75Hz
[ 23.587] (II) intel(0): 800x600@56Hz
[ 23.587] (II) intel(0): 800x600@60Hz
[ 23.587] (II) intel(0): 800x600@72Hz
[ 23.587] (II) intel(0): 800x600@75Hz
[ 23.587] (II) intel(0): 832x624@75Hz
[ 23.587] (II) intel(0): 1024x768@60Hz
[ 23.587] (II) intel(0): 1024x768@70Hz
[ 23.587] (II) intel(0): 1024x768@75Hz
[ 23.587] (II) intel(0): 1280x1024@75Hz
[ 23.587] (II) intel(0): 1152x864@75Hz
[ 23.587] (II) intel(0): Manufacturer's mask: 0
[ 23.587] (II) intel(0): Supported standard timings:
[ 23.587] (II) intel(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 23.587] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 23.587] (II) intel(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 23.587] (II) intel(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 23.587] (II) intel(0): #4: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 23.587] (II) intel(0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 23.587] (II) intel(0): #6: hsize: 1440 vsize 900 refresh: 75 vid: 3989
[ 23.588] (II) intel(0): Supported detailed timing:
[ 23.588] (II) intel(0): clock: 119.0 MHz Image Size: 459 x 296 mm
[ 23.588] (II) intel(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 23.588] (II) intel(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 23.588] (II) intel(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 23.588] (II) intel(0): Monitor name: SyncMaster
[ 23.588] (II) intel(0): Serial No: HMFZ102588
[ 23.588] (II) intel(0): EDID (in hex):
[ 23.588] (II) intel(0): 00ffffffffffff004c2d94053232594d
[ 23.588] (II) intel(0): 011401030e2c1e782ab501a5564a9a25
[ 23.588] (II) intel(0): 125054bfef80b30081808140714f8100
[ 23.588] (II) intel(0): 9500950f01017c2e90a0601a1e403020
[ 23.588] (II) intel(0): 3600cb281100001a000000fd00384b1e
[ 23.588] (II) intel(0): 510e000a202020202020000000fc0053
[ 23.588] (II) intel(0): 796e634d61737465720a2020000000ff
[ 23.588] (II) intel(0): 00484d465a3130323538380a20200026
[ 23.588] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 23.613] (II) intel(0): Using EDID range info for horizontal sync
[ 23.613] (II) intel(0): Using EDID range info for vertical refresh
[ 23.613] (II) intel(0): Printing DDC gathered Modelines:
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.613] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.613] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.613] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.613] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.613] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.613] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 23.613] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.613] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.613] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Printing probed modes for output VGA1
[ 23.614] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 23.614] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 23.614] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 23.614] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 23.614] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 23.614] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 23.614] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 23.614] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 23.614] (II) intel(0): Output VGA1 connected
[ 23.614] (II) intel(0): Using exact sizes for initial modes
[ 23.614] (II) intel(0): Output VGA1 using initial mode 1680x1050
[ 23.614] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 23.614] (II) intel(0): Kernel page flipping support detected, enabling
[ 23.614] (**) intel(0): Display dimensions: (440, 300) mm
[ 23.614] (**) intel(0): DPI set to (96, 88)
[ 23.614] (II) Loading sub module "fb"
[ 23.614] (II) LoadModule: "fb"
[ 23.615] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 23.628] (II) Module fb: vendor="X.Org Foundation"
[ 23.629] compiled for 1.9.3.901, module version = 1.0.0
[ 23.629] ABI class: X.Org ANSI C Emulation, version 0.4
[ 23.629] (II) UnloadModule: "vesa"
[ 23.629] (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 23.629] (==) Depth 24 pixmap format is 32 bpp
[ 23.629] (==) intel(0): VideoRam: 262144 KB
[ 23.629] (II) intel(0): [DRI2] Setup complete
[ 23.629] (II) intel(0): [DRI2] DRI driver: i915
[ 23.629] (II) intel(0): Allocated new frame buffer 1728x1050 stride 7168, tiled
[ 23.656] (II) UXA(0): Driver registered support for the following operations:
[ 23.656] (II) solid
[ 23.656] (II) copy
[ 23.656] (II) composite (RENDER acceleration)
[ 23.656] (II) put_image
[ 23.656] (II) get_image
[ 23.656] (==) intel(0): Backing store disabled
[ 23.656] (==) intel(0): Silken mouse enabled
[ 23.658] (II) intel(0): Initializing HW Cursor
[ 23.673] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 23.673] (==) intel(0): DPMS enabled
[ 23.673] (==) intel(0): Intel XvMC decoder disabled
[ 23.673] (II) intel(0): Set up textured video
[ 23.673] (II) intel(0): Set up overlay video
[ 23.673] (II) intel(0): direct rendering: DRI2 Enabled
[ 23.673] (==) intel(0): hotplug detection: "enabled"
[ 23.674] (--) RandR disabled
[ 23.674] (II) Initializing built-in extension Generic Event Extension
[ 23.674] (II) Initializing built-in extension SHAPE
[ 23.674] (II) Initializing built-in extension MIT-SHM
[ 23.674] (II) Initializing built-in extension XInputExtension
[ 23.674] (II) Initializing built-in extension XTEST
[ 23.674] (II) Initializing built-in extension BIG-REQUESTS
[ 23.674] (II) Initializing built-in extension SYNC
[ 23.674] (II) Initializing built-in extension XKEYBOARD
[ 23.674] (II) Initializing built-in extension XC-MISC
[ 23.674] (II) Initializing built-in extension SECURITY
[ 23.674] (II) Initializing built-in extension XINERAMA
[ 23.674] (II) Initializing built-in extension XFIXES
[ 23.674] (II) Initializing built-in extension RENDER
[ 23.674] (II) Initializing built-in extension RANDR
[ 23.674] (II) Initializing built-in extension COMPOSITE
[ 23.674] (II) Initializing built-in extension DAMAGE
[ 23.754] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 23.754] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 23.754] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 23.754] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 23.754] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 23.754] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
[ 23.754] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 23.755] (II) intel(0): Setting screen physical size to 444 x 277
[ 24.316] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 24.316] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.316] (II) LoadModule: "evdev"
[ 24.317] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 24.334] (II) Module evdev: vendor="X.Org Foundation"
[ 24.334] compiled for 1.9.0, module version = 2.5.0
[ 24.334] Module class: X.Org XInput Driver
[ 24.334] ABI class: X.Org XInput driver, version 11.0
[ 24.334] (**) Power Button: always reports core events
[ 24.334] (**) Power Button: Device: "/dev/input/event1"
[ 24.340] (--) Power Button: Found keys
[ 24.340] (II) Power Button: Configuring as keyboard
[ 24.340] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.340] (**) Option "xkb_rules" "evdev"
[ 24.340] (**) Option "xkb_model" "evdev"
[ 24.340] (**) Option "xkb_layout" "us"
[ 24.380] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 24.380] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 24.380] (**) Power Button: always reports core events
[ 24.380] (**) Power Button: Device: "/dev/input/event0"
[ 24.386] (--) Power Button: Found keys
[ 24.386] (II) Power Button: Configuring as keyboard
[ 24.386] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 24.386] (**) Option "xkb_rules" "evdev"
[ 24.386] (**) Option "xkb_model" "evdev"
[ 24.386] (**) Option "xkb_layout" "us"
[ 24.394] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event3)
[ 24.394] (II) No input driver/identifier specified (ignoring)
[ 24.398] (II) config/udev: Adding input device CHICONY USB NetVista Full Width Keyboard (/dev/input/event4)
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Applying InputClass "evdev keyboard catchall"
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: always reports core events
[ 24.398] (**) CHICONY USB NetVista Full Width Keyboard: Device: "/dev/input/event4"
[ 24.403] (--) CHICONY USB NetVista Full Width Keyboard: Found keys
[ 24.403] (II) CHICONY USB NetVista Full Width Keyboard: Configuring as keyboard
[ 24.403] (II) XINPUT: Adding extended input device "CHICONY USB NetVista Full Width Keyboard" (type: KEYBOARD)
[ 24.403] (**) Option "xkb_rules" "evdev"
[ 24.403] (**) Option "xkb_model" "evdev"
[ 24.403] (**) Option "xkb_layout" "us"
[ 24.411] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 24.411] (II) No input driver/identifier specified (ignoring)
[ 27.181] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.182] (II) intel(0): Using hsync ranges from config file
[ 27.182] (II) intel(0): Using vrefresh ranges from config file
[ 27.182] (II) intel(0): Printing DDC gathered Modelines:
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.182] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.182] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.182] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.182] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.182] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.182] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.182] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.182] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.182] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.256] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.256] (II) intel(0): Using hsync ranges from config file
[ 27.256] (II) intel(0): Using vrefresh ranges from config file
[ 27.256] (II) intel(0): Printing DDC gathered Modelines:
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.256] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.256] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.256] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.256] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.256] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.256] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.256] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.256] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.256] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.363] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.363] (II) intel(0): Using hsync ranges from config file
[ 27.364] (II) intel(0): Using vrefresh ranges from config file
[ 27.364] (II) intel(0): Printing DDC gathered Modelines:
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.364] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.364] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.364] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.364] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.364] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.364] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.364] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.364] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.364] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 27.433] (II) intel(0): EDID vendor "SAM", prod id 1428
[ 27.433] (II) intel(0): Using hsync ranges from config file
[ 27.433] (II) intel(0): Using vrefresh ranges from config file
[ 27.433] (II) intel(0): Printing DDC gathered Modelines:
[ 27.433] (II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 27.434] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 27.434] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 27.434] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 27.434] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 27.434] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 27.434] (II) intel(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
[ 27.434] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 27.434] (II) intel(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
[ 27.434] (II) intel(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
[ 33.144] (EE) intel(0): Detected a hung GPU, disabling acceleration.
[ 33.145] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.146] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.162] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.166] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.284] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.287] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.294] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.402] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.723] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.724] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.725] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 33.732] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.493] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 34.893] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 35.695] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.096] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 36.896] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 37.298] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.948] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 38.949] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.057] (EE) intel(0): failed to set cursor: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.064] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.255] (EE) intel(0): failed to set cursor: Input/output error
[ 39.329] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.337] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 39.341] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.522] (EE) intel(0): failed to set cursor: Input/output error
[ 42.531] (WW) intel(0): intel_uxa_prepare_access: bo map failed: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 42.695] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 45.970] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 46.957] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 53.971] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.206] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 54.804] (EE) intel(0): failed to set cursor: Input/output error
[ 72.861] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event5)
[ 72.861] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 72.861] (**) USB Optical Mouse: always reports core events
[ 72.861] (**) USB Optical Mouse: Device: "/dev/input/event5"
[ 72.866] (--) USB Optical Mouse: Found 3 mouse buttons
[ 72.866] (--) USB Optical Mouse: Found scroll wheel(s)
[ 72.866] (--) USB Optical Mouse: Found relative axes
[ 72.866] (--) USB Optical Mouse: Found x and y relative axes
[ 72.866] (II) USB Optical Mouse: Configuring as mouse
[ 72.866] (**) USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 72.866] (**) USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 72.867] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
[ 72.867] (**) USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 72.867] (**) USB Optical Mouse: (accel) acceleration profile 0
[ 72.867] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[ 72.867] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[ 72.867] (II) USB Optical Mouse: initialized for relative axes.
[ 72.868] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[ 72.868] (II) No input driver/identifier specified (ignoring)
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 84.484] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 136.555] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 163.561] (EE) intel(0): failed to set cursor: Input/output error
[ 176.751] (EE) intel(0): failed to set cursor: Input/output error
[ 176.752] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.565] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 179.613] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 190.939] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 196.719] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 197.007] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 200.991] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 202.499] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 203.164] (EE) intel(0): failed to set cursor: Input/output error
[ 207.322] (EE) intel(0): failed to set cursor: Input/output error
[ 207.323] (EE) intel(0): failed to set cursor: Input/output error
[ 208.093] (EE) intel(0): failed to set cursor: Input/output error
[ 208.094] (EE) intel(0): failed to set cursor: Input/output error
[ 209.080] (EE) intel(0): failed to set cursor: Input/output error
[ 209.081] (EE) intel(0): failed to set cursor: Input/output error
[ 209.641] (EE) intel(0): failed to set cursor: Input/output error
[ 209.642] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.392] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 214.885] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.899] (EE) intel(0): failed to set cursor: Input/output error
[ 225.912] (EE) intel(0): failed to set cursor: Input/output error
[ 225.913] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 244.351] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 245.332] (EE) intel(0): failed to set cursor: Input/output error
[ 248.711] (EE) intel(0): failed to set cursor: Input/output error
[ 248.712] (EE) intel(0): failed to set cursor: Input/output error
[ 249.347] (EE) intel(0): failed to set cursor: Input/output error
[ 249.348] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 252.594] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 253.062] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 273.635] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 274.148] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 285.208] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 287.473] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 353.216] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 355.928] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 357.845] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 360.465] (EE) intel(0): failed to set cursor: Input/output error
[ 361.916] (EE) intel(0): failed to set cursor: Input/output error
[ 361.917] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 363.505] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 364.433] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 366.375] (EE) intel(0): failed to set cursor: Input/output error
[ 367.953] (EE) intel(0): failed to set cursor: Input/output error
[ 367.954] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 369.092] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 372.906] (EE) intel(0): failed to set cursor: Input/output error
[ 374.450] (EE) intel(0): failed to set cursor: Input/output error
[ 374.451] (EE) intel(0): failed to set cursor: Input/output error
[ 376.802] (EE) intel(0): failed to set cursor: Input/output error
[ 376.803] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 378.140] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 382.347] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 383.812] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 386.612] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 388.092] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 389.436] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 391.131] (EE) intel(0): failed to set cursor: Input/output error
[ 392.372] (EE) intel(0): failed to set cursor: Input/output error
[ 392.373] (EE) intel(0): failed to set cursor: Input/output error
[ 393.630] (EE) intel(0): failed to set cursor: Input/output error
[ 393.631] (EE) intel(0): failed to set cursor: Input/output error
[ 394.932] (EE) intel(0): failed to set cursor: Input/output error
[ 394.933] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 396.629] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 398.349] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 400.264] (EE) intel(0): failed to set cursor: Input/output error
[ 402.517] (EE) intel(0): failed to set cursor: Input/output error
[ 402.518] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 404.749] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 407.798] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.170] (EE) intel(0): failed to set cursor: Input/output error
[ 411.910] (EE) intel(0): failed to set cursor: Input/output error
[ 411.912] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 413.276] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 414.775] (EE) intel(0): failed to set cursor: Input/output error
[ 416.762] (EE) intel(0): failed to set cursor: Input/output error
[ 416.763] (EE) intel(0): failed to set cursor: Input/output error
[ 420.439] (EE) intel(0): failed to set cursor: Input/output error
[ 420.440] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 424.614] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 426.920] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 430.033] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 432.265] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 435.339] (EE) intel(0): failed to set cursor: Input/output error
[ 437.705] (EE) intel(0): failed to set cursor: Input/output error
[ 437.706] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 441.112] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 444.922] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 448.296] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 450.299] (EE) intel(0): failed to set cursor: Input/output error
[ 453.190] (EE) intel(0): failed to set cursor: Input/output error
[ 453.191] (EE) intel(0): failed to set cursor: Input/output error
[ 455.467] (EE) intel(0): failed to set cursor: Input/output error
[ 455.468] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 458.751] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 460.132] (EE) intel(0): failed to set cursor: Input/output error
[ 462.768] (EE) intel(0): failed to set cursor: Input/output error
[ 462.770] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 464.061] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 467.064] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 469.637] (EE) intel(0): failed to set cursor: Input/output error
[ 472.446] (EE) intel(0): failed to set cursor: Input/output error
[ 472.447] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 475.654] (EE) intel(0): failed to set cursor: Input/output error
[ 477.849] (EE) intel(0): failed to set cursor: Input/output error
[ 477.852] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 481.102] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 483.658] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 486.239] (EE) intel(0): failed to set cursor: Input/output error
[ 489.082] (EE) intel(0): failed to set cursor: Input/output error
[ 489.083] (EE) intel(0): failed to set cursor: Input/output error
[ 491.279] (EE) intel(0): failed to set cursor: Input/output error
[ 491.280] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 494.315] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 495.905] (EE) intel(0): failed to set cursor: Input/output error
[ 498.171] (EE) intel(0): failed to set cursor: Input/output error
[ 498.172] (EE) intel(0): failed to set cursor: Input/output error
[ 499.312] (EE) intel(0): failed to set cursor: Input/output error
[ 499.313] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 501.813] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 502.817] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 507.125] (EE) intel(0): failed to set cursor: Input/output error
[ 508.209] (EE) intel(0): failed to set cursor: Input/output error
[ 508.210] (EE) intel(0): failed to set cursor: Input/output error
[ 540.521] (EE) intel(0): failed to set cursor: Input/output error
[ 540.526] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 541.621] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 552.597] (EE) intel(0): failed to set cursor: Input/output error
[ 553.470] (EE) intel(0): failed to set cursor: Input/output error
[ 553.471] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 554.186] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 555.103] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.143] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.263] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.333] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.557] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.591] (EE) intel(0): failed to set cursor: Input/output error
[ 690.606] (EE) intel(0): failed to set cursor: Input/output error
[ 690.607] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.055] (EE) intel(0): failed to set cursor: Input/output error
[ 691.070] (EE) intel(0): failed to set cursor: Input/output error
[ 691.071] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.300] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 755.444] (EE) intel(0): failed to set cursor: Input/output error
[ 765.910] (EE) intel(0): failed to set cursor: Input/output error
[ 765.911] (EE) intel(0): failed to set cursor: Input/output error
[ 769.826] (EE) intel(0): failed to set cursor: Input/output error
[ 769.827] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 771.279] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 776.475] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 777.584] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 782.163] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 784.345] (EE) intel(0): failed to set cursor: Input/output error
[ 789.813] (EE) intel(0): failed to set cursor: Input/output error
[ 789.814] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 793.986] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 796.717] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 802.971] (EE) intel(0): failed to set cursor: Input/output error
[ 805.567] (EE) intel(0): failed to set cursor: Input/output error
[ 805.568] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 807.811] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 814.410] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 815.460] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 818.800] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 821.589] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 825.657] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 828.078] (EE) intel(0): failed to set cursor: Input/output error
[ 831.833] (EE) intel(0): failed to set cursor: Input/output error
[ 831.834] (EE) intel(0): failed to set cursor: Input/output error
[ 833.806] (EE) intel(0): failed to set cursor: Input/output error
[ 833.807] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 835.978] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 840.143] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 854.335] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 855.471] (EE) intel(0): failed to set cursor: Input/output error
[ 867.428] (EE) intel(0): failed to set cursor: Input/output error
[ 867.429] (EE) intel(0): failed to set cursor: Input/output error
[ 870.354] (EE) intel(0): failed to set cursor: Input/output error
[ 870.355] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.062] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 873.955] (EE) intel(0): failed to set cursor: Input/output error
[ 877.131] (EE) intel(0): failed to set cursor: Input/output error
[ 877.132] (EE) intel(0): failed to set cursor: Input/output error
[ 878.020] (EE) intel(0): failed to set cursor: Input/output error
[ 878.021] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 880.499] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 881.708] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 884.711] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 893.533] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 896.537] (EE) intel(0): failed to set cursor: Input/output error
[ 898.029] (EE) intel(0): failed to set cursor: Input/output error
[ 898.030] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 901.447] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 902.670] (EE) intel(0): failed to set cursor: Input/output error
[ 907.266] (EE) intel(0): failed to set cursor: Input/output error
[ 907.267] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 908.415] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 911.083] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 912.335] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 914.699] (EE) intel(0): failed to set cursor: Input/output error
[ 915.519] (EE) intel(0): failed to set cursor: Input/output error
[ 915.520] (EE) intel(0): failed to set cursor: Input/output error
[ 921.179] (EE) intel(0): failed to set cursor: Input/output error
[ 921.180] (EE) intel(0): failed to set cursor: Input/output error
[ 923.296] (EE) intel(0): failed to set cursor: Input/output error
[ 923.297] (EE) intel(0): failed to set cursor: Input/output error
[ 926.020] (EE) intel(0): failed to set cursor: Input/output error
[ 926.021] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 926.881] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 930.252] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 931.105] (EE) intel(0): failed to set cursor: Input/output error
[ 938.375] (EE) intel(0): failed to set cursor: Input/output error
[ 938.376] (EE) intel(0): failed to set cursor: Input/output error
[ 951.395] (EE) intel(0): failed to set cursor: Input/output error
[ 951.396] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 997.695] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1034.261] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.673] (EE) intel(0): failed to set cursor: Input/output error
[ 1042.674] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1058.408] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/output error
[ 1061.964] (EE) intel(0): failed to set cursor: Input/outpu
I have installed the xf86-video-intel-newest from AUR, but with modified version - 2.13.0. Now mouse pointer works.
Similar Messages
-
TM fails a few seconds after starting first backup
So I buy the 1TB GForce Phantom drive and hook it up via my FireWire 800 on my Dual G5 Tower running Leopard 10.5.2. Using the Disk Utility I partition it into two HFS Extended volumes, naming the second one TimeMachine.
I fire up the TM application for the first time and configure it to use this mounted volume. A few seconds after starting the first backup, it quits with an Error 11.
Below is a clip of the Console log.
Is this saying there is something wrong with TechTool Pro?
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Backup requested by user
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Starting standard backup
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Backing up to: /Volumes/TimeMachine/Backups.backupdb
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Event store UUIDs don't match for volume: Caladan HD
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Event store UUIDs don't match for volume: SysBack
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Event store UUIDs don't match for volume: Data1
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Backup content size: 50.8 GB excluded items size: 144 KB for volume Caladan HD
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Backup content size: 50.4 GB excluded items size: 144 KB for volume SysBack
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] Backup content size: 38.1 GB excluded items size: 0 bytes for volume Data1
5/20/08 5:43:19 PM /System/Library/CoreServices/backupd[10664] No pre-backup thinning needed: 167.18 GB requested (including padding), 580.96 GB available
5/20/08 5:43:53 PM kernel disk1s3: I/O error.
5/20/08 5:43:53 PM /System/Library/CoreServices/backupd[10664] Error: (-36) copying /.TechToolProItems/Caladan HD(1) to (null)
5/20/08 5:43:53 PM /System/Library/CoreServices/backupd[10664] Error: (-36) copying /.TechToolProItems/Caladan HD(1) to /Volumes/TimeMachine/Backups.backupdb/caladan/2008-05-20-171519.inProgress/7D01 AA4F-A9FD-4D1A-A97B-902D85DDA0E9/Caladan HD/.TechToolProItems
5/20/08 5:43:53 PM /System/Library/CoreServices/backupd[10664] Stopping backup.
5/20/08 5:43:53 PM /System/Library/CoreServices/backupd[10664] Error: (-8062) copying /.TechToolProItems/Caladan HD(1) to /Volumes/TimeMachine/Backups.backupdb/caladan/2008-05-20-171519.inProgress/7D01 AA4F-A9FD-4D1A-A97B-902D85DDA0E9/Caladan HD/.TechToolProItems
5/20/08 5:43:53 PM /System/Library/CoreServices/backupd[10664] Copied 0 files (719.3 MB) from volume Caladan HD.
5/20/08 5:43:53 PM /System/Library/CoreServices/backupd[10664] Copy stage failed with error:11
5/20/08 5:43:53 PM /System/Library/CoreServices/backupd[10664] Backup failed with error: 11
Thanks in advance.
Jeff CameronI finally had an opportunity to repair permissions and test TM again.
It still aborts with the error 11.
I think it has to do with a file or files in the directory /.TechToolProItems
So I'm going to delete all the files in this directory so that Tech tool will rebuild them. I'll let you know the results. -
My iphone 4 was updated 2 months ago, after updated the safari suddenly stopped working.I open the safari and it stops immediately. i cannot download anything or access any website through Safari. What shall i do to resolve this issue?
Yes but there's no point doing it here. As the Terms of Use make quite clear this is a User to User forum. It's Users like you talking to other Users. It's not a channel to communicate with Apple.
Regards
TD -
Mouse cursor freezes a few seconds after start-up? Need help!
Laptop: Samsung Series 9
OS: Windows 8.1
Problem: since booting up my computer today, my cursor will freeze about 30 seconds after boot-up. Prior to this, I'll be able to move my cursor for a few seconds as I normally would, but then I will inevitably see the blue loading circle next to the cursor
and then my cursor will be frozen in place. I can still use my keyboard/everything else functions regularly. I decided to boot up my computer in safe mode and my cursor works fine. Clearly then, there must be some software/start-up issue?
I should note that I used my laptop fine yesterday night. When I booted it up today my cursor froze and I saw the restart prompt that said windows will restart on its own in 1 day to update. So I updated/restarted and the problem persists.Hi,
Mostly, this issue is caused by third party services or programs conflict problem.
Please use Clean Boot to troubleshoot:
How to perform a clean boot in Windows 8.1, Windows 8, Windows 7, or Windows Vista
http://support.microsoft.com/kb/929135
In addition, please check and install the mouse driver from the vender official website.
Karen Hu
TechNet Community Support -
Acrobat quit few seconds after start
After I starded Acrobat professional running on a Mac G5 with OSX 10.4, it quits after few seconds.
Here there is the acrobat.crash.log text.
Thanks for the help.
Host Name: power-mac-g5-di-g5
Date/Time: 2008-05-13 13:55:23.922 +0200
OS Version: 10.4.11 (Build 8S165)
Report Version: 4
Command: Acrobat
Path: /Applications/Adobe Acrobat 8 Professional/Adobe Acrobat Professional.app/Contents/MacOS/Acrobat
Parent: WindowServer [57]
Version: 8.0.0 (8.0.0)
PID: 304
Thread: 0
Exception: EXC_BAD_ACCESS (0x0001)
Codes: KERN_PROTECTION_FAILURE (0x0002) at 0x00000004
Thread 0 Crashed:
0 libobjc.A.dylib 0x90a410f0 objc_msgSend + 16
1 com.adobe.Acrobat.framework 0x840b7fd0 RunAcrobat + 1215452
2 com.adobe.Acrobat.framework 0x840b7f4c RunAcrobat + 1215320
3 com.adobe.Acrobat.framework 0x84454d64 CopiesPagesPDE_Open + 2694748
4 com.adobe.Acrobat.framework 0x83f9b3d8 RunAcrobat + 49124
5 com.adobe.Acrobat.framework 0x84454eb8 CopiesPagesPDE_Open + 2695088
6 com.adobe.Acrobat.framework 0x841919cc AcroBundleThreadQuitProc + 3772
7 com.adobe.Acrobat.framework 0x83f91478 RunAcrobat + 8324
8 com.adobe.Acrobat.framework 0x841935e4 AcroBundleThreadQuitProc + 10964
9 com.apple.Foundation 0x92bf3a5c _nsnote_callback + 180
10 com.apple.CoreFoundation 0x90805eac __CFXNotificationPost + 368
11 com.apple.CoreFoundation 0x907fdf0c _CFXNotificationPostNotification + 684
12 com.apple.Foundation 0x92bdde64 -[NSNotificationCenter postNotificationName:object:userInfo:] + 92
13 com.apple.AppKit 0x93792d28 -[NSApplication _postDidFinishNotification] + 112
14 com.apple.AppKit 0x93792c14 -[NSApplication _sendFinishLaunchingNotification] + 92
15 com.apple.AppKit 0x939c5b6c -[NSApplication(NSAppleEventHandling) _handleAEOpenDocuments:] + 104
16 com.apple.AppKit 0x937923d0 -[NSApplication(NSAppleEventHandling) _handleCoreEvent:withReplyEvent:] + 296
17 com.apple.Foundation 0x92bf4a68 -[NSAppleEventManager dispatchRawAppleEvent:withRawReply:handlerRefCon:] + 380
18 com.apple.Foundation 0x92bf48c8 _NSAppleEventManagerGenericHandler + 92
19 com.apple.AE 0x91500960 aeDispatchAppleEvent(AEDesc const*, AEDesc*, unsigned long, unsigned char*) + 208
20 com.apple.AE 0x915007fc dispatchEventAndSendReply(AEDesc const*, AEDesc*) + 44
21 com.apple.AE 0x91500654 aeProcessAppleEvent + 284
22 com.apple.HIToolbox 0x932ae2e0 AEProcessAppleEvent + 60
23 com.apple.AppKit 0x93790a4c _DPSNextEvent + 856
24 com.apple.AppKit 0x93790538 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 116
25 com.apple.AppKit 0x9378ca7c -[NSApplication run] + 472
26 com.adobe.Acrobat.framework 0x83f9005c RunAcrobat + 3176
27 com.adobe.Acrobat.framework 0x83f8f4e4 RunAcrobat + 240
28 com.adobe.Acrobat.Pro 0x00003b2c start + 5956
29 com.adobe.Acrobat.Pro 0x0000257c start + 404
30 com.adobe.Acrobat.Pro 0x00002424 start + 60
Thread 1:
0 libSystem.B.dylib 0x9002c3c8 semaphore_wait_signal_trap + 8
1 libSystem.B.dylib 0x90030eac pthread_cond_wait + 480
2 ...ple.CoreServices.CarbonCore 0x90c044b0 MPWaitOnSemaphore + 184
3 AdobeACE 0x8fc39aa8 ACEInitialize + 6336
4 AdobeACE 0x8fc3978c ACEInitialize + 5540
5 ...ple.CoreServices.CarbonCore 0x90bc6794 PrivateMPEntryPoint + 76
6 libSystem.B.dylib 0x9002bd08 _pthread_body + 96
Thread 2:
0 libSystem.B.dylib 0x9000b348 mach_msg_trap + 8
1 libSystem.B.dylib 0x9000b29c mach_msg + 60
2 com.apple.CoreFoundation 0x907de998 __CFRunLoopRun + 832
3 com.appI tried different suggestions from the Internet, but nothing worked. The following haiku came to mind:
Errors have occurred.
We won't tell you where or why.
Lazy programmers.
I finally completely wiped out entire Acrobat family from my computer - uninstalled it, then manually removed all Acrobat-related folders and registry entries I could find, and re-installed Acrobat Pro from scratch. That did it. -
Pavilion dv6z notebook - shut down a few seconds after pressing the power button
Pavilion vd6z powers up for 5 seconds (I see the HP logo screen and the Windows startup asks if it should launch the Repair or Start Normally) then it shuts off.
I have removed the battery/disconnected the adapter and held the power button in for over a minute several times, removed and replaced the memory, blown the dust from the cooling fan & heat sink. I also have tried booting with the hard drive removed. The same issue exists if I have the battery in or not. After all of the these steps, the system still starts up and then powers off after just a couple seconds.
If I press ESC to enter SETUP, the system will still power off.
The warranty expired a few weeks ago and HP tech support can not help me...other than suggesting that I put a post on the forum.
Has anyone experience a similar problem and found a solution?Hello again visionpga.
If you've used known working memory and the problem still exists then you've ruled out many of the causes as you've tried testing all the hardware which you can test. I believe you're experiencing a motherboard issue which is likely a short. This repair is possible for you to do yourself if you have technical experience or you could have the notebook repaired by HP.
If you want to try repairing the notebook yourself I'll need your product number. This document shows how to locate the product number.
The US/Canadian number for HP Support is 1-800-474-6836. If you're in another country you'll need to visit HP Support Worldwide to locate the contact information.
If you have any other questions just let me know.
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue. -
ITunes stops working a few seconds after start-up - frustrating!!!
Hello guys
I figured it would be better to submit this, since I wasn't able to find anything like it. It seems that people experience this when they do something specifically, but this is not my case. So long I have tried this:
Copy QTMovieWin.dll from: C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes
But I can't locate the folder "iTunes" under Program Files (x86) - I can't find that folder anywhere, to be honest.
When I opened iTunes this morning it seemed to run completely normal for about five - six seconds, then the message "iTunes has stopped working.", came up and all I could do was to try again. This problem happens everytime I open the program now, always after a couple of seconds. I can do whatever I want in that period of time, the message always pops up and after that it's over. Yes, I've tried restarting my computer and those kind of things. I'm using Windows 8.1 - please help! Music really means alot to me, so this is extremely frustrating since I was about to sync a new album.
Anyway, thanks for your time and take care.Try opening iTunes in safe mode (hold down CTRL+SHIFT) as you start iTunes, then going to Edit > Preferences > Store and turning off Show iTunes in the Cloud purchases. You may find iTunes will now start normally.
tt2 -
Latest version of firefox crashing a few seconds after starting
Hello, after updating to the latest version of Android Firefox (33.0), the app keeps stopping (doesn't force close, just kicks me back to my homescreen).
Have tried clearing cache and clearing data, which doesn't achieve anything, can't see anything amiss in the logcat.
Are there any known bugs that might cause this? Are there any diagnostics that I can run to help isolate what might be causing the issue?If reinstalling does not resolve this issue there are some more troubleshooting steps to take including having clear steps for reproducing.
There are some resources that can be helpful in this situation:
*[https://developer.mozilla.org/en-US/docs/Tools/Remote_Debugging Remote Debugging in Android]
*Submitting crash reports from the about:support page
* Troubleshooting to see if there is an issue with an add on or antivirus scanner on the device
* Adding the troubleshooting information from the about:support page
All of this information is useful when filing a bug in bugzilla.mozilla.org. As well as how to get involved :-) [https://wiki.mozilla.org/Mobile/Get_Involved]
Thank you for your interest. -
HP Split X2 randomly hangs every few seconds after start-up
My HP Split X2 running Windows 8.1 will sometimes, not all of the time, act very very slowly during shut down and boot up. The spinning dots spin very slowly, and the lock screen and login screens are very laggy. Then, after about 15 minutes, everything goes back to normal performance.
And, this problem doesn't even happen all of the time. Yesterday, for almost the entire day, it acted this way. Then, at night, it was normal, and is normal as I type this. What's more is that when it happens, I watch the Task Manager, and CPU, Memory, and Disk are all normal. No spikes in usage. I have also confirmed that no automatic maintenance is running during this time (this was the case a few times in the past so I eliminated this as a root cause). I also ran full system diagnostics (Esc and then F2 during boot) and no problems were found.
Anyone else had this random, not always reproducible problem? How can I troubleshoot it if it doesn't happen all of the time?the one I have is exactly as you describe too.
When it is having its episode the mouse pad is totally random and you cannot select anything although the touch screen i less so but I cannot select my password via picture in win 8.1.
Again i have scanned for malware and virus, the machine has all the latest from microsoft and HP.
My ralink wireless card is next to useless if i am more than 2 meters from the router is this a common fault also? -
Safari 4.0.1 crashes a few seconds after starting
Hello,
Safari is having problems to start up as following: the apple start page appears, shows only an incomplete view (only the side and top panels) and then crashes showing "The application safari quit unexpectedly".
The application has no add-ons and I reinstalled it by downloading it again from the apple web-site, but the problem remains.
This occurred after a last update which concerned the bluetooth device (not in use) and quick time.
Thank you in advance for reading my post and the help it may provide!
Here is what the problem report details (and lower, what the console writes):
Process: Safari [195]
Path: /Applications/Safari.app/Contents/MacOS/Safari
Identifier: com.apple.Safari
Version: 4.0.1 (5530.18)
Build Info: WebBrowser-55301800~1
Code Type: X86 (Native)
Parent Process: launchd [73]
Interval Since Last Report: 1575 sec
Crashes Since Last Report: 8
Per-App Interval Since Last Report: 33 sec
Per-App Crashes Since Last Report: 8
Date/Time: 2009-06-21 12:54:47.374 +0200
OS Version: Mac OS X 10.5.7 (9J3032)
Report Version: 6
Anonymous UUID: 8A868CF6-DF46-458C-92E8-61765A4CFBD9
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Symbol not found: _JVMGetJVMsWithCurrentArchitectureForTask
Referenced from: /Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa
Expected in: /System/Library/Frameworks/JavaVM.framework/Versions/A/JavaVM
And here is what the console says:
6/21/09 12:54:50 PM com.apple.launchd[73] ([0x0-0x2b02b].com.apple.Safari[195]) Exited abnormally: Trace/BPT trap
6/21/09 12:56:31 PM [0x0-0x2d02d].com.apple.Safari[200] dyld: lazy symbol binding failed: Symbol not found: _JVMGetJVMsWithCurrentArchitectureForTask
6/21/09 12:56:31 PM [0x0-0x2d02d].com.apple.Safari[200] Referenced from: /Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa
6/21/09 12:56:31 PM [0x0-0x2d02d].com.apple.Safari[200] Expected in: /System/Library/Frameworks/JavaVM.framework/Versions/A/JavaVM
6/21/09 12:56:31 PM [0x0-0x2d02d].com.apple.Safari[200] dyld: Symbol not found: _JVMGetJVMsWithCurrentArchitectureForTask
6/21/09 12:56:31 PM [0x0-0x2d02d].com.apple.Safari[200] Referenced from: /Library/Internet Plug-Ins/JavaPluginCocoa.bundle/Contents/MacOS/JavaPluginCocoa
6/21/09 12:56:31 PM [0x0-0x2d02d].com.apple.Safari[200] Expected in: /System/Library/Frameworks/JavaVM.framework/Versions/A/JavaVMHi Yann,
Your issue sounds the same as this post. The original poster in the thread below hasn't responded whether my suggestion works or not, but give it a try in the meantime:
http://discussions.apple.com/message.jspa?messageID=9676979#9676979 -
Photoshop Elements 12 stops working a few minutes after starting the application
I need technical support for this problem.
This is definitely a Spaces/Mision Control-related issue - I disabled the keyboard shortcuts and the issue goes away. Of course this is not a solution as I need keyboard shortcuts to be productive.
I think it has something to do with the control key being mapped to multiple functions. This issue cropped up for me only after upgrading to Lion. When I upgraded to Lion for some reason the left control key took on the same function as the "Application Windows" function in Mission Control (which is assigned by default to F10). I went into the Keyboard shortcuts settings and can't see where the left control key is being mapped so I can't remove it. I think for me this is the cause of the spaces keyboard shortcut issue - something in the system is grabbing onto the left control key function and fighting with Mission Control when I hit control-1 or control-left to switch desktops. When this happens the keyboard no longer responds to most keypresses and I have to kill the dock to restore functionality.
If anyone else could confirm that their left control key is invoking the "Application Windows" function I think we can narrow down the issue and possible come up with a solution. Please report back and I'll do the same. Also, Apple, please take onus and address this issue as I believe it's not related to third-party software. -
Notebook freezes few seconds after start. Overheat? New video cable?
Hello and thanks for your attention.
HP Pavillion DV5-1235e
Windows Vista
4 years old.
I wanted to clean the fan on my laptop since it is 4 years old now. So I had to take apart everything and took it back together. I did remove the old thermal paste and putted some new. Except that I didn't change anything. And I also canged the video cable for a new one.
My first attepmt to start didn't end well. I pressed the power button my notebook started but the sreen didn't start and from there on he didn't even boot. (the HDD led didn't blink ) So i found a solution for that. pulled out the power suply, pressed the power button for 30-60 sec. Puted the power back and viola! It worked. But I didn't even open a web browser and the laptop freezed. So i pressed the power button for 3 sec and the laptop turned off. Turned it back on I had the same problem as in the first attemp. So had to pull out power suply, press power button , put power suply back on and it worked again but i didn't have time to open speedfan to see the temp so I don't know what happend actualy. The fan is rotating. the thermo paste is new. everything should work fine.
edit: I managed to start speedfan. The temperatures were low. The lowest I have ever seen them. But he still freezed
edit2: In safe mode. it works longer but freezes(does freeze and the monitor turns off)
Thank you who made it to this point.
Looking forward the anwsers.Hello AmlnnN,
I understand have you finished doing a little maintenance work on the computer it now freezes periodically is that correct? I will do all I can to help you resolve this issue.
First thing lets run a couple test on some of your hardware.
See steps below:
1. I want you to boot into the bios menu this link will show you how.
2. Once in bios go over to the diagnostic option at the top.(Note you will need to use the arrow keys to navigate)
3. You may see 2 test there if that is the case run both test.
4. It may take some time so please have the ac adapter plugged in.
5. Once the test finished press F9 to setup defaults and then press F10 to save and exit.
Also find out while you’re in the bios if the computer ever freezes there.
Pleas respond back with your results at your earliest convenience.
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem! -
https://www.dropbox.com/s/wxd3jqin7a8ulni/Screenshot%202014-08-18%2013.03.59.png
https://www.dropbox.com/s/xdx4br9ub4hymgf/Screenshot%202014-08-18%2013.03.44.pngHi Soracte,
Please try downloading the software from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us .
In case of any issue try the direct download: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l .
Kindly follow the very important instructions before download.
Regards,
Romit Sinha -
Cannot start stopped servers, after restarting the SIA all stopped working
All was working ok, but suddenly I could not run reports from Infoview nor from the Central Managment Console. Nontheless, I was able to log in to both (just not run the reports). From the CMC, I noticed that 5 servers had stopped running, but remained enabled. I tried starting/restarting each of them from CMC, but had no response. I then looked at the properties for each of these servers and noticed the same message in red stating "The Server Intelligence Agent for this server is unavailable". I then went to the Central Configuration Manager at the server where Crystal Reports Server 2008 is installed and launched the Server Manager tool which showed a list of servers. From here, I looked at the Server Intelligence Agent properties and when I clicked on the configuration tab, it asked for me to select from a list of radio buttons of which connection type (if remember correctly) to use...there was no cancel or close option to back out of this, so I randomly chose the oracle type (which is what or ERP system uses as a backend), then was forced to save the changes. Nonetheless, this did not seem to have any effect then, I still had the same problem/issue stated above. I then, following a suggestion, restarted the Server Intelligence Agent. Unfortunately, right after this restart all the servers disappeared from the list of servers in the CCM. In addition, now I can't even login to any of the tools (CMC, Infoview,...) the only place I still can launch is the CCM; however, I cannot access the Server Manager tool in CMC. After entering my credentials, it idles for hours with no response). I'm stock with no way to do any further work...Any help would be greatly appreciated.
Edited by: lirizarry on Dec 3, 2009 6:31 PM
Edited by: lirizarry on Dec 3, 2009 6:37 PMI saw something similiar once when using SAP authentication(you didn't mention which auth model you are using).
If the license you installed was a named user (vs. concurrent user) and you picked the opposite setting in the CMC Authentication section, then you won't be able to login. -
Hi, I am prompted to download the latest I Tunes software (10.7) (I have done this sucessfully for other versions many times before)
The process starts but stops quite quickly.A message pops up "Errors have occured while installing updates, if the problem persists choose Tools>Download Only and install manually" When I try this it still fails but another message pops up "Invalid signature, the download has been removed"
Not very sharp on computers so any help would be appreciated.
RegardsTry updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/
Maybe you are looking for
-
I am trying to link sections of an form within a PDF back to instructions within the same PDF document. Instead of having this jump back to the page within the document I would like for it to pull up the identified text within a separate pop-up text
-
Hi, I'm from Romania and I want to use GPS for free but i can't.I don't lnow how work.Where is the download for Gps for my Nokia,how to install?Thanks! I have already installed Maps but don't work,i can't see the maps.
-
Displaying a webpage in a JEditorPane from a JApplet
Hi. I am trying to display a webpage in a JEditorPane from an a JApplet. I've tried. try { URL url = new URL("http://www.yahoo.com"); jEditorPane1.setPage(url); } catch(Exception e) {e.printStackTrace();}But I got an AccessCon
-
Error message when exporting in LR4
Hi there When I export in LR4 I get the following message. However the export appears to have completed correctly. Any ideas?
-
Cannot Install: 'Select Destination' is BLANK
I load up the leopard installation, and after it I accept the license agreement; I get to a screen that says 'Select Destination' to install leopard. What's supposed to appear are the hard drives I want to install OS X on. However, in the selection b