A field in the handshake was out of range or incon...

My company has wildcard ssl like *.xxxx.com and Exchange 2007. I have E71(400.21.013) Mfe 2.09(176). Nobody can send push mail with nokia phone. E71, N79 .... I called the nokia support and they told me that m4e is not working with Exchange 2007 with SSL supoort. They said I need to set SSL off to reach my mail.
A bussiness phone without email. What can I do for this issue to support Nokia support in Turkey?
13.12.2009 00.10.26 OffPeakTime active
13.12.2009 00.10.29 Setting OFFLINE Status to False
13.12.2009 00.10.30 Setting DISK FULL status to False
13.12.2009 00.10.30 Delay the connection to server.
13.12.2009 00.10.39 Setting ROAMING status to False
13.12.2009 00.10.39 Cancel Job:0, Type:"Sync Job On Profile":
13.12.2009 00.10.41 547 A field in the handshake was out of range or inconsistent with other fields.
13.12.2009 00.18.08 OffPeakTime active

You can use Email application by disabling internet trust options of the SSL authority that your company's certificate belongs

Similar Messages

Protected: value to add was out of range

i have problem
it's notification:
''Protected: value to add was out of range
Parameter name: value"
My OS is 8.1
Please help me

Hi,
To enable us to help you better, you need to provide as many details as you can about the problem you are experiencing.
Also, you can capture a screenshot or take a photo on the error appeared and share with us.
Then, upload the screenshot to SkyDrive:
http://skydrive.com
Regards,
Kelvin hsu
TechNet Community Support

Index: The argument is out of range: 8 0 or 8 =8. (Error: RWI 00012)

Hi Friends,
One of my user is receiving the below error, pls help me is resolving this.
index: The argument is out of range: 8<0 or 8>=8. (Error: RWI 00012)
Thanks in Advance
MMVIHAR

Hi,
No, you defiitely should not/cannot apply FP4.2 ontop of SP05
This fix is going to be ported to FP5.1 which is planned for CW25 (end of June) according to here:
https://websmp104.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000092015&_SCENARIO=01100035870000000202&
Regards,
H

Expose userid field in the Check in/out web service

Hello
I need to integrate the Check in/out web services into a InfoPath Library Form. I have the webservices added and working properly. My progress thus far:
              -CheckinFile, CheckOutFile, UndoCheckOut data connections are added
              -Necessary rules are built
              -Web services appear to work correctly EXCEPT
1. I receive an error if the form is opened in Browser, but not when opened in InfoPath Filler. This is a problem because most of our users do not have InfoPath installed. So we have a need to open in Browser or dialog.
2. Once the file is checked back in, the field "Checked Out To" defaults to an application ID.
So two issues:
How to open the form in Browser
How to set the Checked Out To field to the current user.
From what I have been told, I need to expose the userid element in InfoPath designer.

Hello,
I have not tried this yet but you can just follow hilary suggestion to check in/out form when it opens.Make sure your versioning is enabled in library.
http://www.infopathdev.com/blogs/hilary/archive/2010/11/10/check-that-form-out-or-in-automatically.aspx
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Bought songs as singles before the album was out

Hi,
Does anybody know how to make iTunes update the song's information if i purcahsed the song as single before the album was released. Now, the artwork and the album's name of that song is still marked as Single but since the album was already released, is there any way to update the information? Even on the album's page in iTunes tells me that i have already purcahsed the song.
Thank you!

Right-click the track in your library. Choose Get Info and go to the Info tab. There you can update the Album title.

My LG monitor says the display is out of range.

My LG W2040T Flatron monitor says the D-Sub is out of range. No matter what I do in the settings will change this issue. My Macbook Pro is the new version with Thunder Bolt. I never had this problem with my old black macbook. Has anyone else had this problem? If so, how did you fix it? Thanks for you help in advance.
-Paul

If you have the two displays "Mirrored" (which is usually the default) it will use a resolution that is closest to a resolution that both displays can handle. But sometimes it misses, and one or both displays are left "out of range". If you set "Extended desktop" instead, you can set each display's resolution separately.
System Preferences > Displays > ( Arrange )
... if the Icons for the two screens are one on top of the other, that is Mirrored. Drag one off and arrange them to correspond to their positions in space. Now you have Extended Desktop.

Field Length in Alv Grid out put

hi,
How to increase the length of the filed in the output of alv grid,
Actually i am getting one blank field in the alv grid out put, my requirement is to increase the length through out the column how to do that
can anyone guide me plz
SIRI

in your fieldcat of the field
wfieldcat-fieldname = '<your fieldname in caps>'
wfieldcat-outputlen = 10 (or the length you want for the field)
<you can define any other property also for that field>
append wfieldcat to ifieldcat.
now pass it in fm.
regards
shiba dutta

I rented a movie on iTunes and the sound is out of sync and the movie has now been removed?

i rented a movie and the sound was out of sync i reported it and got no respone and now the movie has been removed, help please??

Report it again using this link and ask for a credit.

How to check if the file is out of synchronization

I would like to check every time my main application frame gets focus if the file has been changed while the frame was out of focus, like what eclipse has, how can I achieve this? (except by saving the file data on loosing focus, is there a better way to accomplish this)
Thanks in advance,
Adam Zehavi.

yes well thanks for pointing this out, my application is based on multiple frames that might or might not be working on the same Stream object or file, and since every modification should be noticeable for the other frame, I've made sure each frame saves and closes the file on 'save' and do not keep the stream open.
Thanks for the heads up,
Adam.

PCC-F-02044, CMD-LINE: Illegal or out of range value for option

Good day,
I very new to Pro*C and its compiler, i was tasked to recompile a program from a previous developer and got stuck with the above mentioned problem.
The command i'm using to compile the program is: proc xxx.pc
This returns the illegal or out of range value error
#include <iostream>
#include <fstream>
#include <string>
#include <stdio.h>
#include <sqlda.h>
#include <sqlcpr.h>
#include <sqlca.h>
#include <stddef.h>
using namespace std;
char myfile[60];
char puk [][];
int last_col = 0;
int last_row = 0;
int line_nr = 0;
string line = "";
int main(int argc, char *argv[])
    if (argc != 2)
       return(1);
ifstream myfile;
myfile.open (argv[1],ios::in);
if (myfile.is_open())
    while (! myfile.eof() )
    //while(getline(myfile,line))
      getline (myfile,line);
      line_nr++; //counting number of lines
      line = trim(line); //remove whitespaces
      if (line == "\r" or line.length() == 0) {
         continue; //ignore blank lines
       if (line_nr == 1) {
          last_col = 1;
          last_row = 0;
          puk [last_row][last_col] = line;
       } else if (line_nr > 1 && line.substr(1,3) != 'OOF') {
          last_col = last_col + 1;
          puk [last_row][last_col] = line;
       } else {
         last_row = last_row + 1;
          puk [last_row][1] = line;
    myfile.close();
    line_nr = 0;
return 0;
         Any assistance will be appreciated.
Regards,

My pcscfg.cfg file is set as follows:
sys_include=(/usr/include/c++/4.1.1/iostream,/usr/include/c++/4.1.1/backward/iostream.h,/usr/include/c++/4.1.1/fstream,/usr/include/c++/4.1.1/backward/fstrea
m.h,/usr/bin/strings,/usr/include/string.h,/usr/include/strings.h,/usr/include/stdio.h,/usr/lib/syslinux/com32/include/stdio.h,/oracle/client/9.2.0/precomp/p
ublic/sqlda.h,/oracle/client/9.2.0/precomp/public/sqlcpr.h,/oracle/client/9.2.0/precomp/public/sqlca.h,/usr/include/linux/stddef.h,/usr/lib/gcc/x86_64-redhat
-linux/4.1.1/include/stddef.h,/usr/lib/syslinux/com32/include/stddef.h,/usr/lib/syslinux/com32/include/bitsize/stddef.h,/usr/include,/usr/lib/gcc-lib/i386-re
dhat-linux/2.96/include,/oracle/app/oracle/client/precomp/public,/user/include/g++-3)
ltype=short

Mini Safe Mode Resolution is Out of Range

Hi everyone,
I just bought a second-hand Mac Mini 1.86 and am using it as a media server. I set everything up on my Samsung 940mw and then hooked it up to my girlfriend's LN-T4065F Samsung. I made the foolish mistake of working with SwitchResX instead of DisplayConfigX which I am much more familiar with. I set a Custom profile in SwitchResX and upon reboot, the TV says that the signal is out of range.
I now know the exact refresh and H/V settings so I should be in the clear if I can just see what I'm doing!
Here's what I've tried so far, without success:
1) Safe mode. Safe resolution appears to be out of range.
2) Deleted both windowserver .plist files.
3) Deleted the latest folder in /System/Library/Displays/Overrides/ which was created by SwitchResX.
4) Reset the PRAM after each of these steps.
Is it time to reinstall Leopard? Maybe reconnect the Mini to the 940mw and try Safe Mode with that display? I'm stuck here. Luckily, all of my media is on an external, so if we reinstall, I'll just need to download a few choice programs again.
Thanks for your help.

Booted into safe mode using the 940mw, which worked, turned on VNC and used my Powerbook to edit the display settings. However, no amount of fooling around in DisplayConfigX would let me get true 1080p out of the Mini. I went and bought a DVI-HDMI cable and it worked on the spot.

Frequency out of range although set correctly

Every now & then I get the dreaded frequency out of range box up, although it's set at the correct frequency in system preferences. I have a mac mini 4.1 intel core duo 2.4ghz. although my monitor is a Fujitsu siemens 21" screen. didn't have any trouble till updated to last 2 O/S's. Is there a fix?

Was Keynote configured to "Present on a secondary display", by selecting the checkbox in the Preferences menu? Did you try to play your presentation? Also in the Displays preference did you click Arrange and follow the onscreen instructions? Generally you should see your desktop image (but not your desktop icons) after connecting to the projector. I set my desktop image to the background image I'm using for my presentation. I usually play the first few slides of my presentation to insure everything is working correctly.

String index out of range: -1

I am making a program which takes screenshots and uploads them to imageshack.us, I have got the following code.
import java.awt.image.BufferedImage;
import java.awt.*;
import java.io.*;
import java.net.*;
import javax.imageio.ImageIO;
public class Screenshot extends Thread {
     public static void main(String[] args)
          new Screenshot().start();
     public void run()
          try {
               Robot robot = new Robot();
               BufferedImage screenShot = robot.createScreenCapture(new Rectangle(
                         Toolkit.getDefaultToolkit().getScreenSize()));
               ImageIO.write(screenShot, "PNG", new File("screenshot.png"));
               String image = uploadToIs("screenshot.png");
               System.out.println(image);
          } catch (Exception e) {
               e.printStackTrace();
     private static String uploadToIs(String fffffile) {
          HttpURLConnection conn = null;
          DataOutputStream dos = null;
          DataInputStream inStream = null;
          String lineEnd = "\r\n";
          String twoHyphens = "--";
          String boundary = "*****";
          int bytesRead, bytesAvailable, bufferSize;
          byte[] buffer;
          int maxBufferSize = 1 * 1024 * 1024;
          String urlString = "http://www.imageshack.us";
          try {
               String strFilename = fffffile;
               try {
                    FileInputStream fileInputStream = new FileInputStream(new File(
                              strFilename));
                    URL url = new URL(urlString);
                    conn = (HttpURLConnection) url.openConnection();
                    conn.setDoInput(true);
                    conn.setDoOutput(true);
                    conn.setUseCaches(false);
                    conn.setRequestMethod("POST");
                    conn.setRequestProperty("Connection", "Keep-Alive");
                    conn.setRequestProperty("Content-Type",
                              "multipart/form-data;boundary=" + boundary);
                    dos = new DataOutputStream(conn.getOutputStream());
                    dos.writeBytes(twoHyphens + boundary + lineEnd);
                    dos
                              .writeBytes("Content-Disposition: form-data; name=\"fileupload\";"
                                        + " filename=\"" + strFilename + "\"" + lineEnd);
                    dos.writeBytes(lineEnd);
                    bytesAvailable = fileInputStream.available();
                    bufferSize = Math.min(bytesAvailable, maxBufferSize);
                    buffer = new byte[bufferSize];
                    bytesRead = fileInputStream.read(buffer, 0, bufferSize);
                    while (bytesRead > 0) {
                         dos.write(buffer, 0, bufferSize);
                         bytesAvailable = fileInputStream.available();
                         bufferSize = Math.min(bytesAvailable, maxBufferSize);
                         bytesRead = fileInputStream.read(buffer, 0, bufferSize);
                    dos.writeBytes(lineEnd);
                    dos.writeBytes(twoHyphens + boundary + twoHyphens + lineEnd);
                    fileInputStream.close();
                    dos.flush();
                    dos.close();
               } catch (MalformedURLException ex) {
                    System.out.println("Got a malformed URL:" + ex);
               } catch (IOException ioe) {
                    System.out.println("Got an IO issue:" + ioe);
          } catch (Exception e) {
               System.out
                         .println("Sorry, could not find the file to upload. Skipping...");
          try {
               inStream = new DataInputStream(conn.getInputStream());
               int ii;
               String returnd = "";
               while ((ii = inStream.read()) != -1) {
                    returnd += (char) ii;
               int pos = returnd.indexOf("Include details");
               returnd = returnd.substring(pos);
               pos = returnd.indexOf("[IMG]");
               returnd = returnd.substring(pos + 5);
               pos = returnd.indexOf("[/IMG]");
               returnd = returnd.substring(0, pos);
               inStream.close();
               return (returnd);
          } catch (IOException ioex) {
               System.out
                         .println("Got an IO issue from (ServerResponse): " + ioex);
          return "";
}When I start the thread by doing:
new Screenshot().start();I get the String index out of range: -1 error.
StackTrace:
java.lang.StringIndexOutOfBoundsException: String index out of range: -1
     at java.lang.String.substring(Unknown Source)
     at java.lang.String.substring(Unknown Source)
     at Screenshot.uploadToIs(Screenshot.java:93)
     at Screenshot.run(Screenshot.java:23)
But when I add a main method into that class and start the thread it runs fine.
I would appritiate help, thanks alot:)

I understand that part, I was just wondering why my string isn't read when I try and start the thread from another class, but when I run this class on its own and start the thread, it runs fine..

Frequency out of range

I hooked up my MacBook Pro to a high quality Sony Data Projector and the screen showed the message: "Frequency out of range". I tried detect displays, which didn't help. I could not get an image until I clicked on "Mirror Displays" under System Prefs. Then I could see my laptop display on screen and set the resolution and frequency. As soon as I clicked off the "Mirror Displays", the image on screen disappeared again.
I prefer not to use "Mirror Displays", so that people in the audience cannot see my screen. Any ideas on how this can be done and what the problem might be?
Dual G5 Mac OS X (10.4.7)

Was Keynote configured to "Present on a secondary display", by selecting the checkbox in the Preferences menu? Did you try to play your presentation? Also in the Displays preference did you click Arrange and follow the onscreen instructions? Generally you should see your desktop image (but not your desktop icons) after connecting to the projector. I set my desktop image to the background image I'm using for my presentation. I usually play the first few slides of my presentation to insure everything is working correctly.

Timestamp out of range

When i try to insert into a timestamp field, it says the index is out of range.
The database is db2. The column size is 26. What could be the problem.
Thanks

As it says your index is probably wrong. Instead of using 3 you are using 4 or something like that.
Hard to tell since you neither posted the code nor the exception.

A field in the handshake was out of range or incon...

Similar Messages

Maybe you are looking for