A file I/O error has occurred. (Possibly Image Related)

I am trying to save an old project with a new name, and I'm getting this error. It goes through the save process and when it's about done, this pops up. I am using CS2. Ok, now I created a new file and saved it. It saved ok, but then I went to save it again and got the same message. Also, I uninstalled the software and reinstalled it with no luck. HELP!
Update: Ok, so I took the registry and renamed it and created a new one. Now, it seems the problem occurs when I have some images in the file, but not all. If I take the image out, it saves ok, but if it's in there, I get the error. I have used this program on the computer for three years and never had a problem. Also, there have been some weird saved made along the way. The files are saved as part of the file name, but with a ~ in the remainder of it.
Any ideas? Bueller? Bueller?

1. Well, I guess we can rule out a corrupt AI file or image.
2. Far be it for me to try and change a 3-year habit, but the recommended procedure is to use File | Place. You will be presented with the option of linking or embedding at the time you place, but you can always change that status later via the Links palette. I don't know whether this has any bearing on your file I/O error problem, but it's something to try and keep in mind.
3. This is the most likely culprit. Although Adobe's official position is that you should be able to work off network drives (in conjunction with Version Cue), they have also admitted, at times in the past, that it is
preferable to always open from and save to a local drive, copying your files from and to the network drive before and after you do your work. Yes, this is a pain in the butt, and, yes, it might not be the solution to your problem... but there it is.
Since you've already nuked your prefs, there is little else I can think of at the moment. Oh, yes... 3+ years makes you an early adopter of AI 12. So, make sure you've updated to 12.0.1.
Finally, it never hurts to perform standard Windows maintenance -- run chkdsk and defrag; clear out temp folders -- and make sure you have sufficient free contiguous disk space on your scratch space drives.

Similar Messages

  • Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments  Trying to download My Photos and movie 3 items so i can delete them all

    I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them?  Onece they get into my downloads i can do something with them as i understand.    That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac?    How much better is iLife11 then iPhoto08 and iMovie08 .  Thanks Greg

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Error Message: "There was an error processing a page.  A file I/O error has occurred"

    Hi
    I am running Windows XP on a lab top for a while. Just recently, every time I opened PDF files, I was getting an empty page. So, I installed the latest Adobe Reader. After that I started getting the error message "There was an error processing a page. A file I/O error has occurred".
    Does anybody have a solution to this?
    Thanks in advance.

    I found my problem. My down scale quits, but quits as in not showing it's working. (I was confused too).  Most all files can not be seen until fully downloaded. For whatever reason, perhaps a glitch or the new modum or video card.  When downloading do not interupt as in wanting to view a page, but go to Network and Sharing Center (bottom right hand corner - click the computer running symbol) and click View Status. See Activity. If the numbers are rolling you are recieving. Waiting until it is complete.  This is madding, but I've learned to live with it.
    Hopes this helps.....

  • The document could not be saved. A file I/O error has occurred

    Hello,
    I have scanned PDF files varying in size from < 1,000 pages to > 5,000 pages. I seem to experience this issue on and off on various files regardless of the size. The issue is when I OCR the pdf using Adobe Acrobat X Pro, when it's completed the OCR process and I go to save it errors out with: "The document could not be saved. A file I/O error has occurred"
    I have tried:
    1. Saving to local hard drive
    2. Saving to network drive
    3. Renaming file and repeating steps 1&2
    4. File/Save as and reducing (but it won't allow me to do so without saving first, lol)
    Any thoughts? Thanks so much.
    Phil
    System specs:
    Windows 7 Professional
    16 gb RAM
    500Gb Hard drive (409gb free)
    Adobe Acrobat X Pro
    Message was edited by: bldfb024  (system specs included at bottom)

    No it is from a disk drive.
    Robb Hanke
    [signature deleted by host]

  • I keep getting "The document could not be saved. A file I/O error has occurred."

    Everytime I try to save a PDF file in Reader X... "save as...PDF" I get the "The document could not be saved. A file I/O error has occurred."
    When I save it "save as...Text" is saves.

    No it is from a disk drive.
    Robb Hanke
    [signature deleted by host]

  • Illustrator files cannot be opened: Could not read the file because an error has occurred.

    I cannot open some files from  Illustrator which contain PNG files placed. When I try to open the file, I get a message saying: "this png contains addtional data for Adobe fireworks, which will be discarded upon save." When I press "ok" I get the same screen again. When I press "cancel" I get: "coulld not read the file because an error has occured". I am currently working on a Mac Mavericks. Using Illustrator cc and Fireworks CS6.

    Eliana,
    If you have some file corruption, one thing often tried first is to create a new document and File>Place the (PDF contents, if any of the) corrupted one to see how much may be rescued that way.
    Here are some websites where you can see whether it can rescue the actual file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    http://www.illustrator.fixtoolbox.com/
    As far as I remember, the first one is for Win and the second one is for Mac, while the third one should be for both.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html

  • Please Help!!  "A File I/O Error Has Occurred" every time I try to save...

    I'm working on a postcard design for print purposes with several embedded images and text elements. I've saved successfully several times early on, but suddenly, every time I attempt to save, I get the message "A File I/O Error Has Occurred". I need to get this to the printer, but can't make important changes now. HELP!
    Thanks,
    paul

    Crazy! Wasn't saving to a server, but to a 2-gig jump drive. When I saved it to my mac's hard drive, no problem. Is there a short answer to why that happens? I didn't appear to be out of space on the external drive...
    Thanks Scott!
    paul

  • A file I/O error has occurred

    I am trying to pull results from a query onto a pdf.  I have created my fdf file and then on my action.cfm file have the include tag to call the fdf file.  When I run through the test of it I get an Acrobat popup error "A file I/O error has occurred.  This is my first time trying this so I am not sure what is causing this messge.  Can anyone help point me in the right direction?  Below is my code.  Any input would be greatly appreciate.
    The first page is the basic form.
    INSERT PAGE
    <!---inserts data into PAF Table --->
    <cfset Date = #CreateODBCDate(DateFormat(Now()))#>
    <cfquery name="AddClaim" datasource="paf">
    INSERT INTO paf(emp_id, emp_lname, emp_fname, ssn, date_prepared, adv_done, kick, pp_error, pp_corrected, discovered, reason, comments, timekeeper, updated_date)       
    VALUES('#FORM.emp_id#', '#FORM.emp_lname#', '#FORM.emp_fname#', '#FORM.ssn#', '#FORM.date_prepared#', #FORM.adv_done#, #FORM.kick#, '#FORM.pp_error#', '#FORM.pp_corrected#', '#FORM.discovered#', '#FORM.reason#', '#FORM.comments#', '#FORM.timekeeper#', #Date#)       
    </cfquery>
    <cfquery name="printpaf" datasource="paf">
    select max(paf_id), emp_id, emp_lname, emp_fname, ssn, date_prepared, adv_done, kick, pp_error, pp_corrected, discovered, reason, comments, timekeeper 
    from paf
    where emp_id = #Form.emp_id#
    group by emp_id, emp_lname, emp_fname, ssn, date_prepared, adv_done, kick, pp_error, pp_corrected, discovered, reason, comments, timekeeper
    </cfquery>
       <cfoutput query="printpaf">
       <input type="hidden" Name="emp_id" Value="#printpaf.emp_id#">
       </cfoutput>
    <cflocation URL="paf_returnpdf.cfm?u=#printpaf.emp_id#">
    FDF file
    <cfoutput>%FDF-1.2
    %âãÏÓ
    1 0 obj
    <</FDF<</F(http://127.0.0.1/paf/paf.pdf)/Fields[<</T(adv_done)/V(#printpaf.adv_done#)>><</T(comments)/V(#printpaf.comments#)>><</T(date_p repared)/V(#printpaf.date_prepared#)>><</T(discovered)/V(#printpaf.discovered#)>><</T(emp_ fname)/V(#printpaf.emp_fname#)>><</T(emp_id)/V(#printpaf.emp_id#)>><</T(emp_lname)/V(#prin tpaf.emp_lname#)>><</T(kick)/V(#printpaf.kick#)>><</T(pp_corrected)/V(#printpaf.pp_correct ed#)>><</T(pp_error)/V(#printpaf.pp_error#)>><</T(reason)/V(#printpaf.reason#)>><</T(ssn)/ V(#printpaf.ssn#)>><</T(timekeeper)/V(#printpaf.timekeeper#)>>]/ID[<27BC6D37C8AA3412AAE8EB 5F3681D97C><0CCF0565C93F524C97430547B68D769C>]/UF(http://127.0.0.1/paf/paf.pdf)>>/Type/Catalog >>
    endobj
    trailer
    <</Root 1 0 R>>
    %%EOF</cfoutput>
    ACTION PAGE
    <CFSETTING ENABLECFOUTPUTONLY="YES">
    <CFPARAM NAME="URL.Debug" DEFAULT="0">
    <cfquery name="printpaf" datasource="paf">
    SELECT max(paf_id), emp_id, emp_lname, emp_fname, ssn, date_prepared, adv_done, kick, pp_error, pp_corrected, discovered, reason, comments, timekeeper 
    FROM paf
    where emp_id = #url.u#
    GROUP BY emp_id, emp_lname, emp_fname, ssn, date_prepared, adv_done, kick, pp_error, pp_corrected, discovered, reason, comments, timekeeper
    </cfquery>
    <CFIF NOT URL.Debug>
    <CFHEADER NAME="Content-Disposition" VALUE="inline; filename=paf_data.fdf">
    <CFCONTENT TYPE="application/vnd.fdf">
    </CFIF>
    <CFSETTING ENABLECFOUTPUTONLY="NO"><CFINCLUDE TEMPLATE="paf_data.fdf">
    thanks Sue

    You probably have a time synch problem with the network. Talk to your IT folks.

  • Use adt to package an air installer success, but install this air file "sorry , an error has occured

    hi everyone, i am using a bat file to package an air file ,
    this application runs on windows 7 32 bit,
    it need to call another windows application , so i google and then find i need to add -target native when package , so i added.
    the bat file is like below:
    ========================================
    @echo off
    :: AIR application packaging
    :: More information:
    :: http://livedocs.adobe.com/flex/3/html/help.html?content=CommandLineTools_5.html#1035959
    :: Path to Flex SDK binaries
    set PATH=%PATH%;C:\AdobeAIRSDK\bin
    :: Signature (see 'CreateCertificate.bat')
    set CERTIFICATE=yeahCert.pfx
    set SIGNING_OPTIONS=-storetype pkcs12 -keystore %CERTIFICATE% -tsa none
    if not exist %CERTIFICATE% goto certificate
    :: Output
    if not exist air md air
    set AIR_FILE=air/jonnson.air
    :: Input
    set APP_XML=application.xml
    set FILE_OR_DIR=-C bin .
    echo Signing AIR setup using certificate %CERTIFICATE%.
    call adt -package      %SIGNING_OPTIONS%  -target native  %AIR_FILE% %APP_XML% %FILE_OR_DIR% 
    if errorlevel 1 goto failed
    echo.
    echo AIR setup created: %AIR_FILE%
    echo.
    goto end
    :certificate
    echo Certificate not found: %CERTIFICATE%
    echo.
    echo Troubleshotting:
    echo A certificate is required, generate one using 'CreateCertificate.bat'
    echo.
    goto end
    :failed
    echo AIR setup creation FAILED.
    echo.
    echo Troubleshotting:
    echo did you configure the Flex SDK path in this Batch file?
    echo.
    :end
    pause
    ======================================================
    after run this bat , the air file is successfully built , but when i want to install this air , it says "sorry ,an error has occured .....  bla bla installer file is damaged....bla bla "
    but when i remove the red part -target native  in the command above then run it again , the new packaged air file can install successfully, but the application can not call other windows apllication anymore, nativeprocess.issupported always returns false when running
    so seems like the problem is all about -target native , deos anyone know whats wrong ?
    this problem really bothers me long time , any help will be appreciated. thanks in advance!

    Nice! I swear I tried that URL (substituting "mac" for "win" and "MAC" for "WIN" in the one relaxatraja posted), but I guess I missed something.
    Ironically, it doesn't include a binary either, but a simple alias works:
    alias pfi='java -jar /path/to/PFI/lib/pfi.jar'
    And it did indeed produce an ipa without error. I don't have my hardware with me, but I'll be able to test it tonight. Meanwhile, I think I'm in business. Thank you all!

  • Reader XI: There was an error processing a page. A file I/O error has occurred.

    I have a user who has been experiencing this error sporadically when trying to open PDFs. Since the problem is not occurring for EVERY PDF, it becomes more difficult to figure out the cause. I had the user email me the PDF as an attachment, and I had the same error when I tried to open it. However, if instead of opening the PDF, I Saved As to my desktop, and opened it from there, it opened w/ no issues. I wonder if maybe it's some kind of corruption in the original file.

    I found my problem. My down scale quits, but quits as in not showing it's working. (I was confused too).  Most all files can not be seen until fully downloaded. For whatever reason, perhaps a glitch or the new modum or video card.  When downloading do not interupt as in wanting to view a page, but go to Network and Sharing Center (bottom right hand corner - click the computer running symbol) and click View Status. See Activity. If the numbers are rolling you are recieving. Waiting until it is complete.  This is madding, but I've learned to live with it.
    Hopes this helps.....

  • The document could not be saved. A file I/O error has occured

    I get this error every now and then when I am working on a PDF and then go to save it. It is on a Windows 7 PC. It will not even let me try to save it as a different file name either.

    Hi gohan201,
    Let us know if this addresses the issue:
    In Acrobat, choose to Edit > Preferences.
    Go to the Page Display panel.
    Uncheck Use 2D Graphics acceleration.
    Click OK.
    Regards,
    Rave

  • There was an error processing a page.  A file I/O error has occurred.

    Hello, we are getting this error message when opening most of our financial statements, etc...
    We have tested the files on several versions of Adobe Reader, such as 9.0,  9.3.4,   10.0
    This statement does however open up on some machines which are not on our network at all.
    Our versions of Adobe Reader are also fully updated.

    I found my problem. My down scale quits, but quits as in not showing it's working. (I was confused too).  Most all files can not be seen until fully downloaded. For whatever reason, perhaps a glitch or the new modum or video card.  When downloading do not interupt as in wanting to view a page, but go to Network and Sharing Center (bottom right hand corner - click the computer running symbol) and click View Status. See Activity. If the numbers are rolling you are recieving. Waiting until it is complete.  This is madding, but I've learned to live with it.
    Hopes this helps.....

  • Photoshop CC 2014 - The file can not be saved in path because an error has occurred

    Hello,
    I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
    - Open NEF RAW file in Brdige
    - Settings in ACR and give it into PS by clicking OK in ACR
    - In PS doing a adjust some levels
    - press SHIFT+STRG+ALT+E for a new summary layer
    - Uing Topaz Adjust on the new level with 65% opacity
    - press SHIFT+STRG+ALT+E for a new summary layer
    - Using Topaz DeNoise on the new layer
    - pres STRG+i and resize the image to 1200x797
    - Using Topaz InFocus on the same layer as DeNoise
    - create a vignette with brightness adjustlayer
    After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
    I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
    I re- and installed all Adobe Products more than three times, doesn't solve the issu.
    After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
    This is my rig:
    Gigabyte Z87X-UD4H mainboard
    Intel Core i7 4770k
    32GB Corsair RAM
    250GB Samsung 840 Evo SSD Drive
    nVidia Geforce GTX770
    During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file. 
    From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
    So please guys, help me to figure out why this error occurs in my system.
    Thanks in Advance and best regards,
      Michael

    Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

  • Error message "A I/0-error has occured in the file" (free translated from Swedish). What to do?

    Hello!
    I keep getting the error message "A I/O-error has occured in the file" (free translated from Swedish) when I try to save changes to a .ai-file in Illustrator. I have never experienced that before. Does anyone have any idea what the problem is? Greatful for a quick answer, since I can't get any work done =/ Thank you in advance!

    alu,
    If it is a specific file, one thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
    Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
    http://www.recoverytoolbox.com/buy_illustrator.html
    and another similar website,
    http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
    As far as I remember, the former is for Win and the latter for Mac.
    Here are a few pages about struggling with it yourself:
    http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
    http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
    http://kb2.adobe.com/cps/500/cpsid_50032.html
    http://kb2.adobe.com/cps/500/cpsid_50031.html
    http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
    If it is not just a certain file, you may have a look at the list.
    The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
    1) Close down Illy and open again;
    2) Restart the computer (you may do that up to 3 times);
    3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
    4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
    5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
    Even more seriously, you may:
    6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
    http://www.adobe.com/support/contact/cscleanertool.html

  • An error has occurred while transferring this file - MuVo v

    Hi, I recently purchased a MuVo v00, and am in the process of putting some music on it. I put a number of songs on it yesterday, and after noticing it still had almost 300 megs free, I decided to add some more. However it will now not allow the addition of ANY songs. Any I try to add, it fails to do so, giving me a "an error has occurred while transferring this file" message. Even when I attempt to rip directly from my cds to the device, it gives me this error.
    I've checked that all my software is up-to-date (using the automated update feature with the software I was provided)
    I would appreciate any help with this.

    I have exactly the same problem with my MuVo? .5 GB!
    I know that i had once about .GB of mp3s stored on it, however, I deleted all of them to upload a different mp3 collection. Now when I upload files to the MuVo, it stops when I have transfered about 450 MB. However, Windows-Explorer and Creative Media Source both say that there are still 900 and a few MB left, but when i try to copy a file - again "no space left on device".
    I tried to:
    delete all files, try transfer again - same effect
    run scandisk - no change
    format the player from the rescue menu - no change (whatever this does, this is not a real format, more a quickformat)
    updated to the latest firmware - still no change!
    I'm kinda really pissed now, I spent quite some time googling, but didn't find anyone else with that problem.
    So .. where went that "space"? Would it be usefull to re-format the player using the Windows format tool, like suggested in that thread (with the settings from that thread):
    http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=400
    I started to do that, but since it was *very* slow and the disk was seeking a lot (battery eaten up after about 20 mins!) I stopped the process.
    Maybe I will try that afain tomorrow, but *somehow* this can't be the real solution. Whatever the MuVo does here seems not to be standard behaviour, since scandisk reports the dri've to be OK. Would it be possible to re-partition the MuVo? I guess thats not a good idea, since I believe that the firmware is somewhere on the disk, too.

Maybe you are looking for