A file with that name you specified already exists.

I'm using Deamweaver 8.0.1 on a Mac. My server is right next
to me and is also a Mac. Both Mac's are on OSX10.4.6
I connect to the server vis AppleTalk local network.
I guess I'm having a premission problem but whenever I try
and synchrnize I get an error like this:
Started: 6/14/06 8:39 AM
admin.php - error occurred - An error occurred - cannot put
admin.php. A file with that name you specified already exists.
File activity incomplete. 1 file(s) or folder(s) were not
completed.
Files with errors: 1
admin.php
Finished: 6/14/06 8:39 AM
I can manually copy files without error or insedent...
I have tried coping the entire site to the server, mannually,
again. I have deleted the site reference in Dreamweaver, quit and
then re-launch Dreamweaver and create a new site.

Update
I changed over to FTP connection with the host, just incase there was some weird wrong with my server. And FTP works fine from the command line, but Dreamweaver is seems goofed.
I "tested" the connection from the manage sites menu, its ok. The trouble remains when i upload files. Now, Dreamweaver says "error occured - An FTP error occured -- cannot put [file name] Access Denied. The file mau not exist or there could be a permission problem."
I have full access to the vsftp.conf file and I've allowed,
write_enable
local_mask
Any thoughs? Its entirely possible there is a simple explanation. I had this working before. Its just not working now.
Xtian

Similar Messages

  • "The folder with the notebook name you specified already exists. Please enter a different name" when tried to open existing onenote.onepkg

    Hi All,
    Office 365 -Onenote 2013
    I am facing this issue when ever i tried to open the existing Onenote.onepkg. Unless i give different name it will not open.
    What is the problem and how can i fix this?
    Thanx In Advance,

    Seems this a sync/conflict issue between your local OneNote and OneDrive. You must change your local folder name and avoid any existing files in that clould-folder may be overwritten by local files in the notebook you open, if the files have the same
    name.
    You'd better to change the name on one of sites.
    Thanks.
    Tony Chen
    TechNet Community Support

  • Spotlight/Finder can't find a file, yet when I search the timecapsule for they find it. If I try to restore the file I get "file with that name already exists...." What is wrong?

    I was trying to find a file (iTunes Backup). When using finder/Spotlight they couldn't find the file.
    I then opened up my timecapsule and searched for the file....tick-a-de-da it found it in yesterdays backup. I attempted to restore the file and got the prompt "A file with that name already exists in this location, would you like to keep both, replace the file or cancel the request.
    So if the file is there why can't spotlight/finder find the file??
    If it helps I get this from the terminal when checking if indexing was enabled.
    $ mdutil -s -a
      Indexing enabled.
    /Volumes/Data:
    2014-11-18 18:09:39.542 mdutil[1472:572531] Metadata.framework [Error]: mdsCopyStoreAttributes failed: (8) (os/kern) no access
      No index.
    /Volumes/Time Machine Backups:
      Indexing and searching disabled.
    /Volumes/Time Machine Backups/Backups.backupdb:
      Indexing enabled.

    Hi Danielle,
    Is there any possibilty that some of your files (a VI or DLL?) have been moved, renamed, or deleted? Also, what version of LabVIEW are you using and are you using any .NET DLLs? Another option to consider would involve VISA or DAQmx property nodes. Are you using any of these property nodes in your code? Here is a KnowledgeBase article to describe more about the VISA and DAQmx property nodes in a source distribution:
    Error Creating Source Distributions Involving rc Files: http://digital.ni.com/public.nsf/allkb/833BFD5E9CA0224886257584004DAA4C?OpenDocument
    I hope this is able to help.
    Anna L
    Applications Engineer
    National Instruments

  • Have published iweb site for five years with no problems and just opened a new site and get - 404: Page not found  This error is generated when there was no web page with the name you specified at the web site.-is the problem with iweb or with hosting?  T

    I am sorry if thie is republished-My first time doing this and I am not sure what goes where and where to hear feedback.
    Have published iweb site for five years with no problems and just opened a new site and get -
    404: Page not found 
    This error is generated when there was no web page with the name you specified at the web site.-
    Troubleshooting suggestions:
    Ensure the page you are linking to exists in the correct folder.
    Check your file name for case sensitivity . Index.htm is not the same as index.htm!
    Temporarily disable any rewrite rules by renaming your .htaccess file if it exists
    is the problem with
    iweb or with hosting?
    One Apple tech started to fix Iweb and had to end session and the next said problem with hosting at Network Solutions as it published
    to local folder. NWS has checked sttting a few times-
    Any help would be extremely appreciated as trying to fix this for about five weeks
    Thanks VG
    <Email Edited by Host>

    It's a really bad idea to post your email address - it's an invitation to spam - and I've asked the Hosts to remove it. (Even though I've now noticed you mis-spelled it! - anyway, never post your address in a forum.)
    You have a site here: http://virginiagordon.com/www.virginiagordon.com/WELCOME.html
    If that's not the page you are having trouble with, what is that page's URL?

  • The operation cannot be completed an item with the name  "...already exists

    Hello mac users,
    please help me... I can't copy to Applications any larger *.app file. I try drag Ableton (live.app ~120mb) or Mailplane.app (76mb) to Application dyr, but I saw message: "the operation cannot be completed an item with the name "..." already exists". But i had never install this apps before.

    So, you are dragging the application from it's folder on the disk image directly to your Applications folder. If that's the case and you still get this message, have you ever installed that application before?
    If it was installed at some time in the past, look in /Library/Receipts to see if there is a .pkg or a .bom for it. If you find one, delete it and try again.
    EDIT: I'm downloading ableton now to see what's going on... OK no problems here. I dragged it to my Applications folder and now have a folder named "Live 7.0.10 OS X" in my Applications folder.
    Perhaps you are looking for it under the wrong name?
    -mj
    Message was edited by: macjack

  • There is already a file with that name

    getting this from entourage when trying to open an attachment.  having all sorts of issues with the last update to 10.6.8
    lost about 35GB - no idea where

    I think you are using the same Composition Class on both project. On the properties tab, you can change this number (e.g.: EDGE-1637270).

  • I want to move my iphoto libarary but i am getting an error message that says there is already a folder with that name - there is not.

    I want to copy my iphoto library to an external hard drive but when i drag and drop it there i get an error message that says there is already a file with that name - i am not sure what to do next?!  i have tried changing the name of the file - and searching for the same file name in the destination folder - nothing works!  i want to back up this library!  HELP!  This is the ERROR message:  The operation can’t be completed because an item with the name “iPhoto Library to MOVE ” already exists.

    Are you following the instructions here:
    http://support.apple.com/kb/HT1229?viewlocale=en_US

  • Static Files with same name. How does apex determine which files to serve?

    Hello, I'm using apex 4.2.1.00.08 and I cannot figure out how apex manages the static files and cannot find any help in the docs (other that some high level UI description).
    The application is serving some file and I cannot find which one it is in any easy way.
    I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.
    There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen as
    SELECT *
    FROM wwv_flow_files
    WHERE flow_id = 0;
    and can apparently only be deleted using "SQL Commands" inside apex.
    the URL called is something like
    wwv_flow_file_mgr.get_file?p_security_group_id=13498126233076320&p_fname=myfile.css
    so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.
    apparently files linked to flow_id 0 have precedence over all the other files ...
    Thanks for clearing up a bit of "fog" on this issue.

    VC wrote:
    Go to that application > shared components > Static files you should see the file.the problem is that there are multiple files with that name, and that sometimes the file being served is linked to application "0" and it doesn't show in the "shared components" interface ...
    I have a workspace where there are several files that have the same name, and I cannot understand how apex figures out which one to serve, and also don't understand what is value of associating a file with an application.Static files can be uploaded to apex with optionally associating with an application within that workspace.
    Files associated with an application are referenced using *#APP_IMAGES#*
    Files not associated with an application are referenced using *#WORKSPACE_IMAGES#*I referenced with #WORKSPACE_IMAGES#, but now I see that if I use #APP_IMAGES# the URL generated will also contain the application ID. This would help to discriminate between different files with the same name but linked to different applications ...
    There are files associated with application 0, which don't appear to show up in the "shared components", but can be seen asWhy are you particularly interested in application 0?Because somehow APEX puts the files that I uploaded there ... they can be seen selecting from wwv_flow_files. Do they take precedence over all other files with the same name?
    Filename is unique for the given workspace[and application]I disagree. I have multiple files with the same name ... the root of this problem ...
    so apparently the only parameters that matter are the workspace and the file name. The associated application is irrelevant.How is your static file referenced??
    But not always, try associating an static file with and application and reference it using #APP_IMAGES# instead of #WORKSPACE_IMAGES#
    See
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/concept_sub.htm#BEIDCGAJ
    http://docs.oracle.com/cd/E37097_01/doc/doc.42/e35125/ui_file_manage.htm#HTMDB06011
    Thanks, but the documentation doesn't give much details ... apparently files referenced with #WORKSPACE_IMAGES# can still resolve to files linked to specific applications ... I would like to understand the actual workflow for the various cases (file references with APP_IMAGES, referenced with WORKSPACE_IMAGES, file associated with the application, with another application, with no application, with application "0" ...).
    Also, I find it somewhat misleading that you can have files associate with applications that don't exist anymore (e.g. have been deleted).
    Edited by: GChierico on Apr 11, 2013 2:16 PM

  • You already have a schema opened on this file with another name: abc

    I am trying to create a model for an XML file, when I clicked on "Objects to Reverse" checkbox under "Selective Reverse" tab, I am getting the following error:
    java.sql.SQLException: You already have a schema opened on this file with another name: abc
    I have created a Data Server in Topology whose schema and workschema are "abc" and logicla schema is "Labc".
    Where is the mistake going in?

    That is because you can only connect to a file in read/write mode once at a time. When you connect to a file without specifying ro=true (e.g. Read Only=true) in the URL, the file is locked and you can’t connect to the file from another instance until the original connection is dropped. I assume since you are trying to connect to the file multiple times that you mean to connect in readonly mode. To do this, like I mentioned earlier, simply add ro=true to your URL and you should be all set. Note: you may need o restart your JVM for chnges to take effect. Let me know if that works.

  • Quicktime displaying "A file by that name already exists."

    When I try and play a video on my MacBook Pro off the internet that isnt youtube I get this stupid messsage from quicktimeX (A file by that name already exists.) and then it doesnt play the video.
    Can anybody help me as this is really annoying.

    Hi, not sure if this is the answer to your problem but maybe it will help. I was having this same issue the other day. I was trying to convert some movie files into iPhone format and I kept getting this error right near the end of the conversion. I have done these conversions many times with no trouble but this time it just wouldn't work. I tried everything and it kept happening. Then I got another weird error message. And then I finally realized that the destination disk for the converted files didn't have enough room on it for the file! I guess I just assumed that Quicktime would tell me there wasn't enough room when I tried to start the conversion, not pretend that it was working then crap out when the disk reached its fill level.
    Who knows, maybe the same thing is causing your error. Hope this helps!

  • The application could not be installed because an application with that name already exists at the s

    The application could not be installed because an application with that name already exists at the selected installation location. Try installing to a different location.

    1.   I am trying to install:  Adobe - Download free trial version
    AdobeAcrobat
    XI Pro <http://www.adobe.com/go/tryacrobatpro/>
    Operating system:  Windows 7
    Current software:  see attachment
    <Removed by Moderator>

  • Exporting text files with song names and artist names only

    I need help exporting a playlist as a text file. I know how to do this already,(right click playlist and select "export song list...") but when i open it up in notepad, it is unorganized and is very hard to read. I am burning a disc for my mom and pasting the playlist on the back of the cd cover. I dont want to type out every artist and song name. Help is appreciated.

    do you have a copy of Excel (or a different spreadsheet) on the PC, kevin? if so, try opening the text file with that. then it's relatively easy to remove information by deleting the columns of info that you don't want.

  • While saving multiple attachments from mail, files with same name are added and not replaced

    While saving Multiple Attachments from Mail, existing file with same name are not overwritted but new files are added in the folder.

    Bjørn Larsen a écrit:
    Hi all
    Hope to get some help with Elements Organizer.
    I have 12-15 years of digital photos that I now want to import into my newly aquirede Adobe Elements Organizer / Photoshop. Since my Nikon names the files with continous numbers from 0001 to 9999 I have multiple files with the same name although they are not alike at all. My previous software had no problems with that since I keep the photos in separate file folders based on import date. I generally import photos after each event and so name the folder with the date and some event info (e.g. 2014.12.24 - Christmas at grandparents).
    That is a common situation, I have the same limitation for files not going over 9999 on my Canons...
    Now - when I import my photos into Elements Organizer I get a lot of error messages with "same name exist .....) Hmmmmmmm
    Please sate the exact wording of the error message, I have never seen a message stating 'same name exist...' or equivalent; only messages about files already in the catalog. Files already in the catalog mean that some files have the same 'date taken' and file size in Kb.
    Any suggestions. I'm using a mac and tried to rename files based on date taken. The mac can do that but it takes ages to go into each folder and run the renaming script there.
    I also use a similar folder creation scheme (such a date naming is the default for the downloader). That way I never get a message about duplicates for the same file names.
    However - I can't be the first or only person with this problem so I figure that some workaround must be known out there. Maybe the import action can recognize date taken or - well. Thank you very much in advance if you can help me out here.
    You can alsways set the downloader to rename the imported files with a unique new name, there are many options in the 'advanced' dialog of the downloader. I don't know about Macs, but I don't thing there is a difference.

  • I need to create an action or script to save the file with the name of the selected layer

    I need to create an action or script to save the file with the name of the selected layer (not including the hidden layers, but including those visible).
    How could modify the script: 'Layer Comps To Files.jsx' to get the result?
    Warning: I do not need to export all layers as files.
    Who can help me?
    THX in advance

    Versione in Italiano (Further down the English version)
    NB - Nella versione inglese ho messo tutte le immagini dei menu in italiano.
    Versione per Mac, ma credo sia identico per Windows.
    Spiego passo passo cosa ho fatto:
    - Ho creato un file esempio con tre Livelli, salvato sulla scrivania e ho chiuso il file.
    - Ho aperto il file e selezionato il Livello al centro per iniziare a registrare una azione che ho chiamato: Save with Name of Selected Layer
    - Nuova azione
    - Dare il nome e premere Registra
    Ora salva…
    - Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
    - Ancora una volta Menu --> Livello... --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
    - Menu --> Livello --> Ordina --> Dietro
    - Menu --> Livello --> Unisci sotto
    - Menu --> Livello --> Unisci visibili
    - Menu --> Livello --> Nuovo --> Livello... e premi -ok-, (lascia il nome che viene mostrato)
    - Menu --> Livello - Nascondi Livello
    - Menu --> Elimina --> Elimina livelli nascosti (press -Yes-)
    - Menu --> Livello --> Nuovo --> Livello... Inserisci questo: 'Move this to the trash' e premi ok
    - Menu --> File --> Script --> Esporta Livelli in File... (Nella finestra che si apre scegliere l’opzione che si desidera, ma togliere il prefisso del nome) e premere -Esegui-
    - Selezionare il pannello Storia cliccare su Elimina premendo -Si- ogni volta che si apre la finestra di dialogo (Ripetere 8 volte questa operazione sino ad arrivare nella storia alla condizione di partenza. Ho visto che è meglio di Ripristina -F12-)
    - Fermare la registrazione.
    A questo punto, mandando in esecuzione questa Azione, ho raggiunto parzialmente l’obiettivo perché i file così creati mantengono, purtroppo, dei prefissi numerici per evitare probabilmente la sovrascrizione di file (credo senza avviso) nel posto dove vengono creati.
    Per ottenere l’obiettivo occorre un nuovo passo ed a proposito di questo riferisco quanto segue:
    ATTENZIONE - L’operazione descritta qui di seguito deve essere fatta su di una copia del file, per cui:
    - Duplicare il file,
    - Spostare l’originale in altra cartella
    - Lavorare sul file duplicato.
    mi riferisco a questo...
    ATTENZIONE - Questa modifica è effettuata a proprio rischio e pericolo ed il sottoscritto non si assume alcuna responsabilità su quanto venga fatto soprattutto da mani inesperte.
    ATTENZIONE - Questa modifica sovrascrive qualsiasi file che abbia nome uguale al layer che viene selezionato più l’estensione del file naturalmente.
    Comunque la modifica è banalissima e a portata di chiunque.
    Procedere così:
    - Chiudere Photoshop
    - Aprire (nel percorso specificato dall’immagine) il file “Export Layers to Files.jsx” (Export Layers To Files.jsx 1.0.0.16) con un editor di testo puro.
    - cercare la stringa (dovrebbe essere in riga 1029)
    var fileNameBody = fileNamePrefix;
    fileNameBody += "_" + zeroSuppress(i, 4);
    fileNameBody += "_" + layerName;
    - sostituirla con:
    var fileNameBody = fileNamePrefix;
    fileNameBody += layerName;
    - cercare la stringa (dovrebbe essere in riga 1047-46)
    var fileNameBody = fileNamePrefix;
    fileNameBody += "_" + zeroSuppress(i, 4) + "s";
    - sostituirla con:
    var fileNameBody = fileNamePrefix;
    fileNameBody += "";
    - salvare e uscire.
    - riavviare Photoshop
    - provare l’azione registrata facendo attenzione che il nome del layer non sia identico al nome di un file già presente altrimenti questo verrà sovrascritto.
    Domanda:
    Perché ho creato livelli che poi ho eliminato ecc.
    Risposta:
    Semplice per evitare errori di esecuzione delle azioni nel caso di operazioni con livelli mancanti o altro.
    Semplice... no?
    English version
    Mac version, but I think it's the same for Windows.
    First of all, I'm translating the actions that I made using the Italian version of Photoshop, you look at the position of the menu that I have chosen to do the work with other languages.
    I explain step by step what I did:
    - I created a sample file with three layers, saved to the desktop and I closed the file.
    - I opened the file and select the layer at the center to start recording an action that I called: Save with Name of the Selected Layer
    - New action
    - Give the name and press Save ( I think it is so in English )
    Now save ...
    - Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
    - Once again Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
    - Menu -> Layer - > Arrange (order) -> Behind
    - Menu -> Layer - > Merge Down
    - Menu -> Layer - > Merge Visible
    - Menu -> Layer - > New —> Layer… and press -ok- , (leave the name that is shown)
    - Menu -> Layer - Hide Layer
    - Menu - > Delete - > Delete hidden layers (press -Yes- )
    - Menu -> Layer - > New —> Layer… Enter this: ' Move this to the trash ' and press ok
    - Menu -> File - > Scripts -> Export Layers To Files... (In the window that opens select the option you want, but take away the name prefix) and press - Run -
    - Select the History panel and click Delete (on menu opened) pressing -Yes- every time when open the dialog box (8 times Repeat this step until you get into the story to the starting condition. Not use Restore -F12-).
    - Stop recording.
    At this point, by executing this action, I have reached the goal partly because the files created in this way remain, unfortunately, the numerical prefixes to avoid possibly overwriting of files (I think without notice) in the place where they are created.
    To achieve the goal we need a new step and thinking about this as follows:
    WARNING - The operation described below should be made on a copy of the file, so :
    - Duplicate the file
    - Move the original folder to another
    - Work on the duplicate file.
    WARNING - This modification is performed at your own risk and the undersigned assumes no responsibility on what is done mostly by inexperienced hands.
    WARNING - This change will overwrite any files with the same name as the selected layer plus the file extension of course.
    However, the change is trivial and within reach of anyone.
    Proceed as follows:
    - Close Photoshop
    - Open (in the specified path from the image ) file " Export Layers to Files.jsx " (Export Layers To Files.jsx 1.0.0.16) with a pure text editor.
    - Search for the string (should be in line 1029 )
    var = fileNameBody fileNamePrefix ;
    fileNameBody = + "_" + zeroSuppress (i, 4 ) ;
    fileNameBody + = "_ " + layerName ;
    - Replace it with :
    var = fileNameBody fileNamePrefix ;
    fileNameBody + = layerName ;
    - Search for the string (should be in line 1047-46 )
    var = fileNameBody fileNamePrefix ;
    fileNameBody + = "_ " + zeroSuppress (i, 4) + "s" ;
    - Replace it with :
    var = fileNameBody fileNamePrefix ;
    fileNameBody + = "";
    - Save and exit.
    - Restart Photoshop
    - Try the recorded Action, making sure that the layer name is not identical to the name of an existing file otherwise it will be overwritten.
    Question:
    Why I created levels which I then deleted etc..
    Answer:
    Simple to avoid errors of execution of the actions in the case of transactions with missing levels and other.
    Simple ... is not it?
    Sorry for my bad English...
    Thanks in advance for any hint.
    --->>> Please think about this... Adobe <<<---

  • How can I see file with chinese name in Sunray USB storage?

    hi, All
    I installed Sunray4u3 on Solaris0805. the application server is win2003EE.
    I accessed usb storage from win2003, but I can only see files with English name , and could not see files with chinese name. Why? who can help?
    best regards
    xiong wei

    You might want to make sure your credit card is listed in the billing information associated with your Apple ID (see http://support.apple.com/kb/ht1918).
    Also, to change the From name that appears when you address emails on and iOS device, go to Settings>Mail,Contacts,Calendars...tap your iCloud email account, tap you iCloud account at the top, tap Mail at the bottom, then enter the name you want to use in the Name field at the top.
    To change the From name on your Mac Mail, go to icloud.com, sign into your account, open Mail, click the gear shaped icon on the bottom left and choose Preferences, go to the Accounts tab and enter the name you want to use in the Full Name field and click Done.  Then quit Mail on your Mac and re-open it.  Your new From name should now appear in the drop-down list when you compose a new email.

Maybe you are looking for