A fix for -10801 error message?

Recently I've been having some strange things occur with my Mac.
1. Entourage will tell me that I need to rebuild the data base, I try to do that but then the message in item number 2. appears. I can restart the computer and then am able to open entourage up without a problem. I was even able to rebuild the data base but the problem eventually returns... and it seems like after the computer has been sleeping.
2. If it's not entourage it's everything else. I keep getting a -10801 error message when trying to start up applications.
I have repaired permissions on the disk, I have run Disk Warrior and this issue is driving me bonkers...
First time I've ever had a problem with this machine.
Help!
Flat Panel 800 - G4 Mac OS X (10.3.9) 1G -Ram

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

Similar Messages

Fix for "System Error" message

Heres the fix for "System Error" error message when trying to open search and the dictionary...Open main menu->applications, Scroll down to the last app's icon and press the options button and choose organize, now select the last icon and choose remove, now it will ask "yes" or "no" wait there for 5-6 secs and give "no" and then choose "done", now the icons would refresh revealing the "Search", "Dictionary" and "Update" apps on the screen...No you will not get the "System Error" messages..

What operating system are you using Premiere?
Premiere requires a 64-bit OS

Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled

I keep getting this error message over and over when all I have plugged in is an Apple USB keyboard and Apple Mouse. Please help...this is crippling the computer!

Sometimes you have to reset the SMC two or three times for it to work, don't know why. I've seen that error message before and 100% of the time it was fixed with an SMC reset. I suppose it's possible that your keyboard or mouse IS drawing too much power, do you have access to another you could try?

Please can you send me a fix for the error message that starts up when I open Firefox. It says " well this is embarrassing," and asks if I want to close the tab

Please can someone tell how to fix the problem I have with firefox on a mac OS. When firefox opens it comes up with an error message " well this is embarrassing...." and continues to ask if I want to close or restore the tabs that are open.
Does anyone have a simple fix?
Thank you
Beamer

Hello Beamer, you must update to latest (21.0) version, the bug it is fixed in firefox 21!
https://bugzilla.mozilla.org/show_bug.cgi?id=845681
[https://support.mozilla.org/en-US/kb/update-firefox-latest-version#os=mac&browser=fx21 Update Firefox to the latest version]
thank you

HT1338 Does anyone have a fix for the error message "Because a USB device was drawing too much power from your computer one or more of your USB devices have been disabled" - this is a brand new machine with nothing connected to the USB ports - i've done u

Hi
does anyone know how to fix the message on my iMac:
"Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
This is a brand new machine and did not have anything attached to the USB ports"
Thanks for any help

If you are getting that message on a brand new Mac with nothing connected to the USB ports, take it back. It is broken.

[svn:fx-trunk] 5408: Fix for - Compiler error using Reparent in a Halo Navigator.

Revision: 5408
Author: [email protected]
Date: 2009-03-18 20:57:19 -0700 (Wed, 18 Mar 2009)
Log Message:
Fix for - Compiler error using Reparent in a Halo Navigator.
QE Notes: None.
Doc Notes: None.
Reviewer: Paul, please review.
Bugs: SDK-20099
tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20099
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/builder/ComponentBuilder.jav a

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occurred". What other options do I have?

Previously posted troubleshooting doesn't work for my error message "iTunes could not back up the iPhone because an error occured". What other options do I have to backup my iPhone data properly?

Hi there kchagape,
You may find the troubleshooting steps in the article below helpful.
iOS: Troubleshooting backup issues in iTunes
http://support.apple.com/kb/ts2529
-Griff W.

Need a BADI for raising error messages for equi update (IE02)

Hi,
we are trying to raise few error messages while creating equipments through BADI's (Processing through IE02 and BAPI's).
No BADI's are supporting for raising error messages.
SAP doesnt support processing of userexits through BAPI's (refer note 564467).
we actually need to implement these checks and should available for all the below processes:
Through IE02
while doing through BAPI's
While Executing MASS CHANGE functionality (IE05)
Please suggest any other solution to achieve all the three at one go instead of creating some enhancements for every thing.
thanks.

Hi,
Try and search for a BADI....for transaction I102...take the package name and go to SE18 and see if BADI's are available...
Alternatively search for key CL_EXITHANDLER or get BADI in the main program of IE02..
if you are using SAP ECC6.0 then implicit or explicit enhancements will be available... Utilize them to meet your requirement...
Thanks

How do I fix an install error message 0x8007054f

How do I fix an install error message 0x8007054f

https://discussions.apple.com/thread/3029902?start=0&tstart=0
old link may be broken new one right here
http://support.microsoft.com/kb/946414
Just wanted to make sure you understand that if you do have question, there are the odds someone already answered it, and it wasn't me.

Mac: couldn't complete update for Ps error message 49 in Creative Cloud

Mac: couldn't complete update for Ps error message 49 in Creative Cloud. Anyone help?

A chat session where an agent may remotely look inside your computer may help
Creative Cloud chat support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html

How to select a locale for parser error messages

Does anybody know how I can select a locale for parser error messages? I found org.xml.sax.Parser.setLocale, but that's for SAX1 and deprecated.
I have a textarea in the user interface where a user can edit XML and, of course, I'd like the parsing error messages to appear in the selected locale...
Any help appreciated.
- Michael

Yes, but doing this you changed the locale for the JVM! I know that. My intention was to see whether the parsers even had error messages in languages other than English. If they didn't then there would be no point in proceeding. But they do, so maybe there is some point.
However you don't get to specify the locale for exceptions thrown by other Java classes, so I wouldn't be surprised to find you don't get to specify the locale for exceptions thrown by XML parsers. I'm not saying there is no way to do that, only that I would not be surprised if there were no way.

Why do I always have "Insufficent Content for Edit" error message ?

Hi all FCE experts,
May I ask why do I always have "Insufficent Content for Edit" error message when I tried to overwrite or replace a clip ?
Ok,this is what happen:
I have a clip A (4 secs) followed by clip B (4 secs). Then in between I add a video transition.
After a while, I reckon I want to change clip B with another clip (say clip C). So, I went to brower & search for clip C which is 2 mins long clip. To make sure there are enough handles, I went to the centre mark an In point then 4 sec later mark an Out point. So I drag this clips C of 4 secs from the Viewer (I marked the In & Out point in the viewer) to the Overlay canvas & do an Overwrite but it says "Insufficent Content for Edit".
I then tried Replace also got the "Insufficent Content for Edit" error message.
I then tried to delete the video transition and repeat the above for overwrite and replace, both times I got the same error.
Any ideas ?
Thanks

Tom Wolsky wrote:
From your description there is no way either of these things should happen. Without seeing it I would guess there is something else going in your timeline or your clip which you're not telling us. *Perhaps there are I/O pints marked in the timeline*. Or the destination tracks are not set correctly. or something else.
Thanks Tom, you are correct.
I have In Point & Out Point marked on the Timeline. I used it when I did FILE > EXPORT and left it there. But once I cleared it, I am able to replace it with another clip.
But I am still puzzled as to why I cannot do any overwrite or replace when there is I/O points marked on the Timeline ? Especially when the section of clips I wanted to overwrite or replaced are located outside of the I/O points ?
Thanks

No Matching Connection for ICMP Error Message

I am running into a little bit of an issue with my Clean Access Deployment. We are using a pair of 5520s in conjunction with Clean Access deployed in L3 gateway mode. My active ASA is constantly displaying the message "No Matching Connection for ICMP Error Message source Clean Access Manager destination some client on our VPN subnet." I understand during discovery the Clean Access Agent will ping the Manager, however what I can't understand is why the CAM continues to send ICMP unreachable messages to some clients. It may send hundreds of these messages over a period of two or three minutes. Any ideas?

I am running into a little bit of an issue with my Clean Access Deployment. We are using a pair of 5520s in conjunction with Clean Access deployed in L3 gateway mode. My active ASA is constantly displaying the message "No Matching Connection for ICMP Error Message source Clean Access Manager destination some client on our VPN subnet." I understand during discovery the Clean Access Agent will ping the Manager, however what I can't understand is why the CAM continues to send ICMP unreachable messages to some clients. It may send hundreds of these messages over a period of two or three minutes. Any ideas?

Itunes artwork display issue and a fix for 'unknown error occured (-50)'

Too bad they dont have stickies. This would be a great one.
This is a thorough fix for art work and the -50 error.
If you see artwork in itunes, first verify that the artwork is in the mp3 tag using a program like "tag and rename" http://www.softdepia.com/tagrename_download1291.html
If the artwork shows up in tag and rename, then you added it correctly.
If the artwork isn't displaying on ipod, delete the song and retransfer to the ipod. Next make sure the "view artwork" check box is checked. To do this connect your iPod to iTunes and there will be a checkbox that should be checked to see if you want artwork to show up on your iPod.
If you get this message -
The ipod cannot be updated. An unknown error occured (-50).
And have no artwork at all in you IPOD , dont fret. I am getting there..
NO you DO NOT NEED to FORMAT YOUR IPOD YET as commonly posted. I have tested and retested the following fix-
Eject IPOD. Kill ITUNES.
Backup the following files
iTunes Library.itl
iTunes Music Library.xml
& anything in the Previous Itunes library folder
and delete them. More info on these at http://docs.info.apple.com/article.html?artnum=93732
Dont worry, its much easier to recreate the database than to wipe your IPOD.
Next Start up ITUNES. Plug in IPOD. You now should have a empty database.
At this time, uncheck copy ARTWORK to IPOD, and when it's done deleting artwork, CHECK Copy ARTWORK to IPOD.
It now should sucessfully display ARTWORK and not get the -50 error!!
Now, goto you ITUNES Music folder and drag to the library and it will add you music back in, including your PODCASTS.
All you need to do is click the RESUBSCRIBE button and you are back in business!
IF this fails, which i cant DUPLICATE anymore, try this
http://docs.info.apple.com/article.html?artnum=300248
Its the DREADED IPOD FORMAT article.
But you probably wont need it if you follow all these steps.
Post back if this doesnt work and if it does, give me some credit;)

Just as an fyi, to shorten this procedure instead of deleting the files i found out you and open the .itl files and delete all the lines in it so its an empty file.
Then open itunes, and it will rebuild the database with the files from the .xml file.
This saves you from having to rescan the songs..

Ibooks author how to fix missing file error message

I have cut and pasted many jpg images into my iBook in iBooks Author. All the pictures appear to be displayed but whenever I open the iba file I get many error messages saying that many of the files are missing. How do I diagnose and fix this issue? Any ideas on how to debug or fix this would be appreciated.

Yosemite is not supported for Encore, but neither was Mavericks (even though it is on the list, I don't think it is truly "supported," and there were issues).
Many of the issues in Mavericks and Yosemite appeared to be permissions. Most Adobe apps need read/write access, and those were not the defaults for the OS.
Some Mavericks users reported the following fixes their problems - I eventually assumed that somewhere in the process, it was fixing permissions. But perhaps it does more:
http://forums.adobe.com/message/6109315#6109315
And comments for these operating systems for Premiere Pro, Adobe Media Encoder, and After Effects may be helpful. (Encore does not have a support team that is active, so nothing official for it.) But there are specific bug fixes for these OSs in CC versions, so....
Monahan re Premiere permissions
http://blogs.adobe.com/kevinmonahan/2014/09/10/premiere-pro-cc-freezing-on-startup-or-cras hing-while-working-mac-os-x-10-9-and-later/
Kopriva re permissions and AE primarily:
http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
Re the Photoshop -1 issue:
http://forums.adobe.com/message/5950080#5950080
The workaround was not to left-click on the menu. Use right click, or other options and menu commands.
http://forums.adobe.com/message/5810884#5810884
See post 12 and several following where we are looking for workarounds to the error.

A fix for -10801 error message?

Similar Messages

Maybe you are looking for