A fix to speaker not working problems on Macbook/Macbook Pro
I've had problems for about a week where my Unibody Macbook incorrectly detected a digital output device in the headphone jack. I found a solution I didn't see discussed in any of the threads here.
I use the Sennheiser MM 60ip headset. These have an integrated microphone and 4-prong switch; they work with my Mac and 2g iPod Touch. After using them extensively, my Mac thought that I had a digital output device connected whenever I unplugged my headset.
I went through the steps suggested by Apple Support: power cycling with battery removed, resetting PRAM and NVRAM, etc. At a genius bar appointment, the tech plugged in a pair of regular Apple earbuds. After disconnecting them, my Mac worked correctly! I am now back to using the same Sennheiser headset, and the speakers work correctly when I disconnect them from the headphone jack.
Does it now work only on battery? or using the power supply?
If only on the power supply use a grounded plug.
Otherwise try reseating touchpad cable. Post the size and year of your MBP.
Similar Messages
-
Is there a fix to touch not working? All updates are done. Intermittent problem
Is there a fix to touch not working? All updates are done. Intermittent problem
Do a reboot by holding both the power and home buttons until the apple logo appears, ignore the red slider if that appears.
If that does not help, take it to an Apple store genius bar and have the techs check it out to make sure there is not a hardware issue. -
Altec Lansing inbuilt speaker not working in HP Pavilion dv1000
Altec Lansing inbuilt speaker not working in HP Pavilion dv1000 , but i can hearing the sound through headphone in headphone socket..
Audio driver installed successfully... If speaker fault, how to remove my laptop, fix it..?
Please solve my problem..Here is the Service Manual:
Manual
Section 5.14 shows removal of the speaker assembly. You have to follow all the steps leading up to that, though.
Speakers for $7 shipped on ebay:
speakers -
IPhone4S external speaker not working
i hv try clear the headphone jack but not working,
clear the dust outside the speaker not working
what else can i do, as i don't want to update my mobile which it might coz all the memories within the mobile lost....
what to do??RRFS Northern Nevada
Re: External speaker port not working
May 11, 2012 8:25 AM (in response to Tremolo Arm)
A few days ago I tried to help a guy with Bose External Speakers and we found the male jack isn't quite long enough to make the connection:
PROBLEM SOLVED!!
Just to share information for others who might come across this problem with Bose or any other external speakers, where the male jack doesn't quite go in far enough for the MacBook to recognize it, here is the solution that worked for me:
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
This is a very inexpensive solution and works great for me. I'm listening to my Bose speakers now and they sound great!! Thank you to all of you for your suggestions and help troubleshooting. -
Revision: 13257
Revision: 13257
Author: [email protected]
Date: 2010-01-04 10:49:13 -0800 (Mon, 04 Jan 2010)
Log Message:
Fix for @inheritDoc not working on a setter, but works on a getter
QE notes: None.
Doc notes: None
Bugs: SDK-24727
Reviewed By: Paul
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24727
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/ClassTable.javasteabert wrote:
Hi,
I had a similar problem with my Dell Latitude E4310, and apparently also the E6410, E6510.
The solution for me was to add the following line to /etc/modprobe.d/modprobe.conf:
options snd-hda-intel model=dell-s14
I tried that, unfortunately it does not work with this chipset. I do get a different set of channels though but it still cannot record anything. Maybe this chipset is too "new" for alsa. The latest release dates back from the end of January. Support for it is explicitly stated in the changelog to 1.0.24 but perhaps the recording part of it slipped through the cracks. ALSA bug tracking system seems quite closed. -
After upgrading IO5 speaker not working
Please advice how to resolve speaker problem after upgrading to IO5, speaker not working and volume bar is missing too.
What Troubleshooting Steps have you tried...
The Basics are Restart... Reset... Restore
Reset your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release the buttons...
iPhone Reset
http://support.apple.com/kb/ht1430 -
I first had a problem with the left speaker not working on the bottom of the phone, then when using heeadphones the left er began to lose nearly all volume and now both are damaged. this is permanent damage not caused by anything other than the phone and has already made 2 seperate pairs of Beats By Dre nearly useless. when i use the headphones in any other device the damage still exists also, the iphone vibrates randomly with 1 vibration not caused by any apps or notifications at all. does apple repair this for free?
The "left speaker" on the bottom of the phone is not a speaker. It is a microphone. There is only one speaker on the bottom of the phone.
-
My macbook pro external speaker not working! help please
My macbook pro external speaker not working! help please
1. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Pllug in the speakers.
Do they show up?
Make sure that Mute is not enabled.
2. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
Best. -
U10i sony ericsson speaker not working...need help
u10i sony ericsson speaker not working...need help...thanks
Anyway thanks... Yesterday my handphone drop again,than the speaker suddenly recover.
-
My new iPhone 4S speaker not working why?
my iPhone 4S iOS 7.0.3,model MF266HN/A,8GB one speaker not working why? What can I do?
All iPhones are mono. Stereo is only available on Earphones.
Bottom left is mic and right is the speaker. -
Two day ago was fine i dont what happed now went a want to talk with speaker not work icant hear music nathing with speakers i have to use the hearphones .. My phone just have like 3 month never fall.
Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Install the latest Audio driver.
http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
Dc7700, window7, machine speaker not working. migrating from window xp to 7
dc7700, window7, machine speaker not working. migrating from window xp to 7
Hi:
Just download and install the latest Realtek HD audio driver from the Realtek site.
Accept the agreement. Download and install either the first or second driver on the list depending on whether you installed the 32 or 64 bit version of W7.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
Paul -
Why does the internet on my new macbook pro not work when my old macbook's does?
Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?
Here is your fix .. I have uploaded my properly calibrated profile get it here :
http://www.megaupload.com/?d=YAJL6A9X
And it should go to your user folder/Library/ColorSync/Profiles
if you have one already you can rename either one ..
and then go to system preferences - displays - color to select the profile .
you will get rid of the blue tint while keeping correct color and gamma
This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . . -
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
My external hard disk not working properly in my macbook pro . anyone help me . its seagate hard disk
You need to get some software that allows your Mac to read and write to the NTFS disk. There's a whole bunch of stuff out there, but this program has a good review, and you can try it for free. I would move everything off of your external drive, reformat it into Mac OSX extended, and use it for your Mac. You don't need NTFS anymore, unless you still have a Windows computer that needs it.
Maybe you are looking for
-
Hi All I am using a web service to feed my flex application with data. When exceptions occur in the web service, I only get some generic error message in my fault handler. I would like to be able to get information such as error messages from the web
-
When I try to access my music library from AppleTV is keeps telling me to turn on ITunes Match. I am not supposed to need iTunes Match for Home Sharing. I tripled checked to ensure Home Sharing is turned on and it is. Can anyone offer a solution?
-
I am woking on small project, on which i am to convert data from SQL Server to Oracle. I am using Oracle Data Integrator. Can any body tell me the steps for it to do ? what i have done uptil now is that i have created master and work repsitories, now
-
Mountain lion will not download thru the apps store. It has been purchased and redeemed. I have set my energy settings appropriately so computer will not turn off during download as Verizon offers a connection that is very slow. I have set the dis
-
Export settings for HD TV commercial
Hi folks, Major novice here so please bear with me. I've cut a 30-second spot for my company and need to submit it to the station that will air it. They have provided the following instructions and I'm trying to make sure I get this formatted and enc