A G5's NVidia GeForce FX 5200 Ultra 64mb in a Dual G4 1.25

Hi i have an NVidia GeForce FX 5200 Ultra 64mb that is my back up card to my G5's NVidia GeForce 6800 GT 256mb, as it's not being used and as i got my lad a Dual G4 1.25 i was wondering will the FX 5200 work in the G4, as it's card though 64mb is Core Image: software and the FX 5200 is hardware.
Thanks for your advice guys.

Hi-
Exactly right- just tape the pins as per this article, and install.
All good!

Similar Messages

Will my NVIDIA GeForce FX 5200 Ultra graphics card drive a 30" display?

I have a NVIDIA GeForce FX 5200 Ultra in my G5 that I purchased 3 years ago. A colleague is selling his 30" monitor (about 2 years old) and I wanted to see if this card would let me use the monitor to it's fullest.
Will my current graphics card handle it?
Thanks ...
Processor 065-4931 2.0GHz PowerPC G5
Memory 065-4976 1GB MB DDR400 (PC3200)-2X512
Hard Drive 065-4982 250GB Serial ATA-7200rpm
Optical Drive 065-4928 8x Super Drive (DVD-R/CD-RW)
Graphic Support 065-4929 NVIDIA GeForce FX 5200 Ultra

You will need a new graphics card with dual-link DVI.
Starting with the fastest:
ATI Radeon X800 XT 256MB (ADC, dual-link DVI)
<http://www.welovemacs.com/0831xeghr.html>
NVIDIA GeForce 6800 Ultra 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613332.html>
NVIDIA GeForce 6800 GT 256 MB (Two dual-link DVI)
<http://www.welovemacs.com/6613441.html>
ATI Radeon® 9600 Pro PC & MAC Edition RoHS 256MB AGP (Single-link, dual-link DVI)
<http://shop.ati.com/product.asp?sku=3170809>

Compatable replacement for nvidiaq geforce fx 5200 ultra video card

i've run diagnostics and need to replace video ram-- can't find nvidia geforce fx5200 ultra that is for imac g5 17'. is there another compatable card? Help!

nvidia geforce fx 5200 ultra

Fade-off with MSI T-128 (nVidia geForce FX 5200) PCI card

Hi
I'm totally fade-off with nVidia GeForce FX 5200 (MSI -T128) graphics PCI card. I've tried all options found on different forums and also with latest driver for the card both from MSI and nVidia. But non of these are able to solve my problem.
Even though, I have installed the latest driver for the card form nVidia or MSI, my system gives BSOD (infinite loop) on XP and system hang on Ubuntu/Linux. Request you to please help me out for this problem. Its dam sure something wrong in the card driver or BIOS settings as its occurring with any OS.
This is my last ray of hope, with a expection that some MSI people will help me out, else I'll have to throw the f**king card to bin. Sorry being unprofessional, but it seems that I have wasted my money banking on the brand MSI/nVidia.
PC Configuration:
1. Asus K8N motherboard (nVidia chipset, NO on-board graphics)
2. MSI T-128 (nVidia GeForce FX 5200) PCI graphics card
3. Windows XP SP3/ Ubuntu 9.04
4. 512 MB DDR1 RAM
5. 320GB, 7200 rpm Seagate ATA HDD
6. AMD Athlon XP 2800+
Again request the nVidia people plz plz plz .. help me.
Note that, When I'm booting with safe mode in XP, the PC DOES NOT hangs.
Thank you in advance.

Its followed by "Sorry being unprofessional". But when my hard earning money draining, its obvious. Anyway, Do you have answer to my request ? Or only guiding me for proper language ? If you have ans plz give me too.
Quote
Is it AGP card? Which one?
Do not you know MSI T-128 is which one, Mr Moderator ?
Quote
Os running?
Windows XP SP3/ Ubuntu 9.04
Quote
Have you tested the VGA in another machine?
After a couple of years savings, I got this PC and you are asking for another PC ? I'm not rich like you.
Hope you have NOT read my post completely and replied, Mr moderator.

Dual monitors on nvidia geforce fx 5200

Hi,
I'm using a nvidia geforce fx 5200 card that has vga out, dvi out, and svideo out. I have one crt hooked into the vga, the main monitor, and I have a dvi to vga converter, to enable a second vga, crt monitor. When I try to use the nvidia-settings, and enable twinview, and I get this message:
"failed to set metamode (1) 'CRT00: nvidia-auto-select @1024x768 + 1024+0, DFP-0: 1024x768 @1024x768 +0+0' (Mode 2048x768, id: 50) on X screen 0."
any ideas? thanks.

Hm, Not working, just display on the true vga monitor. Are you using a dvi to vga connector as well? Heres my log output, I couldn't make too much of it, I tried to switch the CRT-1 to DFP-0 which didn't seem to do the trick either.
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux kenny-desktop 2.6.28-ARCH #1 SMP PREEMPT Sun Feb 8 10:13:45 UTC 2009 i686
Build Date: 17 December 2008 08:20:05PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb 13 13:50:20 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Layout0"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "Mouse0"
(**) Option "Xinerama" "0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/Type1" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Keyboard0
(WW) Disabling Mouse0
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81d5fe0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@1:0:0) nVidia Corporation NV34 [GeForce FX 5200] rev 161, Mem @ 0xfd000000/0, 0xe0000000/0, BIOS @ 0x????????/131072
(--) PCI: (0@3:10:0) Internext Compression Inc iTVC16 (CX23416) MPEG-2 Encoder rev 1, Mem @ 0xf0000000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded by default.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Server Extension
(II) NVIDIA GLX Module 173.14.12 Thu Jul 17 18:36:35 PDT 2008
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "nvidia"
(II) Loading /usr/lib/xorg/modules/drivers//nvidia_drv.so
(II) Module nvidia: vendor="NVIDIA Corporation"
compiled for 4.0.2, module version = 1.0.0
Module class: X.Org Video Driver
(II) NVIDIA dlloader X Driver 173.14.12 Thu Jul 17 18:15:54 PDT 2008
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
(II) Primary Device is: PCI 01@00:00:0
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "wfb"
(II) LoadModule: "wfb"
(II) Loading /usr/lib/xorg/modules//libwfb.so
(II) Module wfb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
(==) NVIDIA(0): RGB weight 888
(==) NVIDIA(0): Default visual is TrueColor
(==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
(**) NVIDIA(0): Option "TwinView" "1"
(**) NVIDIA(0): Option "MetaModes" "CRT-0: 1024x768 +0+0, CRT-1: 1024x768_85 +1024+0; CRT-0: 800x600 +0+0, CRT-1: NULL; CRT-0: 640x480 +0+0, CRT-1: NULL"
(**) NVIDIA(0): Option "TwinViewXineramaInfoOrder" "CRT-0"
(**) NVIDIA(0): Option "AddARGBGLXVisuals" "True"
(**) NVIDIA(0): Enabling RENDER acceleration
(**) NVIDIA(0): TwinView enabled
(II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
(II) NVIDIA(0): enabled.
(II) NVIDIA(0): NVIDIA GPU GeForce FX 5200 (NV34) at PCI:1:0:0 (GPU-0)
(--) NVIDIA(0): Memory: 131072 kBytes
(--) NVIDIA(0): VideoBIOS: 04.34.20.42.00
(II) NVIDIA(0): Detected AGP rate: 8X
(--) NVIDIA(0): Interlaced video modes are supported on this GPU
(--) NVIDIA(0): Connected display device(s) on GeForce FX 5200 at PCI:1:0:0:
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0)
(--) NVIDIA(0): DELL D1025HTX (DFP-0)
(--) NVIDIA(0): Envision EFT7x0 Series (CRT-0): 350.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): 135.0 MHz maximum pixel clock
(--) NVIDIA(0): DELL D1025HTX (DFP-0): Internal Single Link TMDS
(II) NVIDIA(0): Display Device found referenced in MetaMode: CRT-0
(WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
(II) NVIDIA(0): Assigned Display Device: CRT-0
(WW) NVIDIA(0): Invalid display device in Mode Description
(WW) NVIDIA(0): "CRT-1:1024x768_85+1024+0"
(WW) NVIDIA(0): Not using mode description "CRT-1:1024x768_85+1024+0"; unable
(WW) NVIDIA(0): to map to display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(WW) NVIDIA(0): Invalid display device in Mode Description "CRT-1:NULL"
(WW) NVIDIA(0): Not using mode description "CRT-1:NULL"; unable to map to
(WW) NVIDIA(0): display device
(II) NVIDIA(0): Validated modes:
(II) NVIDIA(0): "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) NVIDIA(0): "CRT-0:800x600+0+0,CRT-1:NULL"
(II) NVIDIA(0): "CRT-0:640x480+0+0,CRT-1:NULL"
(II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
(--) NVIDIA(0): DPI set to (81, 81); computed from "UseEdidDpi" X config
(--) NVIDIA(0): option
(**) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) NVIDIA(0): Initialized AGP GART.
(II) NVIDIA(0): Unable to connect to the ACPI daemon; the ACPI daemon may not
(II) NVIDIA(0): be running or the "AcpidSocketPath" X configuration option
(II) NVIDIA(0): may not be set correctly. When the ACPI daemon is
(II) NVIDIA(0): available, the NVIDIA X driver can use it to receive ACPI
(II) NVIDIA(0): events. For details, please see the "ConnectToAcpid" and
(II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
(II) NVIDIA(0): Config Options in the README.
(II) NVIDIA(0): Setting mode "CRT-0:1024x768+0+0,CRT-1:1024x768_85+1024+0"
(II) Loading extension NV-GLX
(II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
(II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
(==) NVIDIA(0): Backing store disabled
(==) NVIDIA(0): Silken mouse enabled
(**) Option "dpms"
(**) NVIDIA(0): DPMS enabled
(II) Loading extension NV-CONTROL
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) Initializing extension GLX
(II) config/hal: Adding input device Logitech Optical USB Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) Logitech Optical USB Mouse: always reports core events
(**) Logitech Optical USB Mouse: Device: "/dev/input/event2"
(II) Logitech Optical USB Mouse: Found 3 mouse buttons
(II) Logitech Optical USB Mouse: Found x and y relative axes
(II) Logitech Optical USB Mouse: Configuring as mouse
(**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
(**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Fri Feb 13 13:52:42 2009: 3113 X: client 17 rejected from local host ( uid=0 gid=0 pid=3481 )

PowerPC G5, NVIDIA GeForce FX 5200, problems with monitor

I have 1.6GHz PowerPC G5 (M9020LL/A) with NVIDIA GeForce FX 5200 & HP LP1965 monitor. Monitor does not wake up after going to sleep using system preferences or being turned off using the button. All I get is light blue screen changing to black and so on and on. Anyone? Thx a lot!

Thx for tips. Booting OK in Safe, reaching Desktop.
1. While in Safe, if both G5 & HP are on "never turn off" I get some dark grey screen after couple of minutes and I can "wake" G5 with mouse/keyboard. If I turn off HP on a button, nothing helps.
2. Still in Safe: as soon as I set G5 to sleep after x mins an HP loses signal, nothing helps. I can wake G5 from keyboard, coming to light blue pic and thats it.
3. Rebooting - nothing helps. As soon as I cut the power to monitor or it goes to sleep, same thing happens. Black screen turning to light blue and so on. I have tried to press Power on G5, put it to sleep, than wake it by pressing Power again. I am stuck on a light blue screen for a minute, then all of a sudden I get the signal back.
Only thing that "works" is to have Screen saver on x mins and Monitor on "Never".

NVIDIA GeForce FX 5200 with Apple 23" Cinema Display?

Hi,
I would like to know if my graphic card in my Sony Vaio PC is compatible with a 23" Apple display ? I would like to run a splitter with one feed going to my Mac Pro and the other to my PC utilizing the same Apple LCD monitor.
I have a NVIDIA GeForce FX 5200 with 128Mb, this card has a PCI connection,but I am not sure if my card could support the Apple 23" Cinema Display that I recently purchased to replace the 19" Envison LCD that I'm currently using ?
Does anyone have an idea ?
Is there a list somewhere giving compatble graphic card ?
The nvidia site does not say a word about cinema display !
Thanks in advance
Regards,
John
Mac Pro 2.66 GHZ, 1 GB RAM, 250 GB HD Mac OS X (10.4.7) Sony Vaio Desktop PC, G-Drive External HD,Toshiba Satellite Pro Notebook

Apple doesn't make compatibility information known
for non-Apple systems.
But yes, they do.
Here is the list of tested video cards for the ACDs:
http://docs.info.apple.com/article.html?artnum=301066
I highly recommend the Quadro cards; they are fantastic.
nansaidh
Dell Windows XP Pro 23" Cinema Display

GeForce FX 5200 Ultra

I recently ungraded my mobo to a MSI 845GE Max. I also tried to install the PNY GeForce FX 5200 Ultra video card. I am running Windows 2000. When I try to install the drivers for the Video card, the system locks up on reboot and the login image is distorted. The PNY FAQs suggest upgrading the Intel chipset, which I have done. Still seems to be in conflict with the onboard vga controller. When I disable the onboard vga driver, the system locks needing a hard reboot. System runs great on the onboard graphics card, but I want to install a 3D card.
Does anyone have any suggestions? Thanks,

Hi gdiodati,
Try disabling your onboard VGA, then set your Init. Graphics Adapter Priority to AGP.
Set your AGP Aperture settings to 128MB or 256MB.
Set your AGP Capabilities to "Auto"
Make sure that its running on at least 4x(1.5v) or max 8x(0.8v).
Check if you've any other devices sharing IRQ with your VGA card.
All the Best... :D!!!

Which two displays on Geforce FX 5200 ultra are possible?

Hi,
I have a Powermac g5 2x2 ghz (2004) Geforce FX 5200 (ultra?) videocard with two 17 inch monitors. I would like to chance one (or maybe both) into a bigger one, maybe a 24 inch. Is this possible and what is important to look at ? And what is the max screen size and resulution this card can have on two monitors? I red somewhere the max res is 1600x1200 and 22 or 24 inch monitors need support for 1920x1080?
Thx in advance. Ron.

Hi-
The Geforce 5200 supports digital resolutions up to 1920 by 1200 pixels.
A LCD monitor with DVI input up to 24" is no problem.
I red somewhere the max res is 1600x1200
That is for analog, not digital.

NVIDIA GeForce FX 5200 compatible with 23" display ?

Hi,
I would like to know if my graphic card is compatible with a 23" apple display ?
I have a NVIDIA GeForce FX 5200 with 128Mo, this card has a PCI connexion,
but I am not sure if my card could support a cinema display at 1900x1200 ?
Does anyone have an idea ?
Is there a list somewhere giving compatble graphic card ?
The nvidia site does not say a word about cinema display !
Thanks for the answers,
Ben
no Mac .. V. sad indeed ! Other OS linux and xp user

Apple doesn't make compatibility information known
for non-Apple systems.
But yes, they do.
Here is the list of tested video cards for the ACDs:
http://docs.info.apple.com/article.html?artnum=301066
I highly recommend the Quadro cards; they are fantastic.
nansaidh
Dell Windows XP Pro 23" Cinema Display

OS X 10.10.1 won't recognize the NVIDIA GeForce 9600M GT side of 9400m/9600m dual video card

My 15" mid 2009 MBP 2.8 ghz 8g ram won't recognize the NVIDIA GeForce 9600M GT side of 9400m/9600m dual video card since upgrading to yosemite 1010.1 When I try to choose the better performance option I get black screen and a reboot loop. Any ideas why or solutions as to how to make the better video card work?

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback
Or you can use your Apple ID to register with this site and go the Apple BugReporter. Supposedly you will get an answer if you submit feedback.
Feedback via Apple Developer

Is Nvidia GeForce FX 5200 adequate?

Before I break the seal and open the box, a question:
The system requirements listed on the Aperture materials list several nvidia GeForce graphics cards, but not the 5200 card I have installed in my G5. Will aperture operate with the 5200 card? Or should I abandon my plan to use the program and return it unopened to the retailer?

Supported? No.
Can be made to work? Yes.
Do a Google. You can modify a part of the Aperture executable to remove the limitation that stops you using the FX5200. You will have to do it after each update.
Adequate? Depends on your patience.
Its very slightly buggy in that the loupe doesnt always completely fill, though that seems far better under 1.1.2.
Its not especially fast and your milage will depend on what camera you use it with. I have a D70 and mainly use for sorts/selects with up to 500 photos in a project folder and for my usage, it works fine.
The thumbnail browser works fine and a pic will 'load' to full rez in 4-5 secs (if not already cached) on my G5 Powermac 1.8 single.

Nvidia GeForce4 Titanium vs. nVidia GeForce FX 5200

I purchased a new dual G5 with an nVidia GeForce FX5200 with 64MB of VRAM. I had in my old G4 a Nvidia GeForce4 Titanium card with 128MB of VRAM. First, can I install the old Titanium card in my G5? If so, is it a better card than the card that the G5 has now? Any suggestions will be deeply appreciated.

The card in the G5 is compatible with the new Tiger Core Image, the one in your G4 is not.

DDR NVidia GeForce FX 5200 graphicis card & 30" Mac HD monitor

I am a new Mac user, having had Dell desktops all my life. Recently, my Dell W1700 monitor/tv crapped out, and (of course) it is just out of warranty.
This prompted me to by a Mac Book Pro with a 30" HD monitor (to work with the PC also).
MY QUESTION:
Like many in here, I want to use the Mac HD monitor with the Mac Book Pro as well as the Dell PC (8300 series). I suspect that the cable connections may not be compatible (pins appear to have a different configuration) though the Dell LCD TV/monitor did use DVI cable in conjunction with a separate green audio cable.
I've already read and reviewed how to set up the laptop with the lid closed while utilizing the HD monitor. Now I need to troubleshoot the HD/PC connections.
Help!
PS-is the spell check feature in this forum messed up or what? I've never had so many idiotic "suggestions".

Hi-
Welcome to Discussions!
The 30" Apple Cinema Display requires a computer with a dual link DVI equipped graphics card. It can connect to single link DVI, but without a dual link, the 30" ACD will not operate at optimal resolution (2550x1600). The 30" ACD is equipped with a dual link DVI-D connector.
I believe your 5200 has a single link DVI-I (2048x1536 max resolution), which will allow coupling with a DVI-I or DVI-D connector.
30" ACD supported resolutions:
2560 x 1600 pixels (optimum resolution)
2048 x 1280
1920 x 1200
1280 x 800
1024 x 640

GeForce FX 5200 Video Card

Hi everyone!
I'm finding conflicting info concerning the graphics card requirement for FCE HD.
I have an original 20 inch iMac with a G5 Power PC processor and a GeForce FX 5200 Video Card, running Panther on the internal HD and Tiger on an external FW drive.
Will FCE HD work with the GeForce FX 5200 Video Card?
Many thanks,
flyboy01
iMac G5 Mac OS X (10.3.9)

Hi(Bonjour)!
On Apple Support specification for original G5 20" iMac :
http://support.apple.com/specs/imac/iMac_G5.html
We can see:
"NVIDIA GeForce FX 5200 Ultra with 64MB DDR SDRAM with AGP 8X support"
On Final Cut Express HD specifications page:
http://www.apple.com/finalcutexpress/specs.html
We can see:
"An AGP or PCI Express graphics card compatible with Quartz Extreme or an Intel GMA integrated graphics processor in MacBook or Mac mini"
Quartz Extreme needs at least:spec says:
"Quartz Extreme functionality is supported by the following video GPUs: NVIDIA GeForce2 MX and later, or any AGP-based ATI RADEON GPU. A minimum of 16MB VRAM is required."
FCE HD3.5 application must be installed on your system disk to run without problem, and needs Mac OS X 10.4.6 (Tiger) to run.
So, yes, your iMac can run FCE HD 3.5 .
I Currently use FCE HD 3.0 on my other computer: an iMac G4 17"
Michel Boissonneault

A G5's NVidia GeForce FX 5200 Ultra 64mb in a Dual G4 1.25

Similar Messages

Maybe you are looking for