A Global Catalog Server could not be located - All GC's are down server 2003 dc
Im all out of ideas. I have two 2003 server DC's that both fail DCDIAG with the following adn my exchange services wont come online due to this. please help!
dc1-server dcdiag
Starting test: FsmoCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
PDC Name: \\dc1-server.silistra-bg.net
Locator Flags: 0xe00003dd
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error 1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... silistra-bg.net failed test FsmoCheck
dc2-server dcdiag:
Starting test: FsmoCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(PDC_REQUIRED) call failed, error 1355
A Primary Domain Controller could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error 1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... silistra-bg.net failed test FsmoCheck
Some troubleshooting ideas:
0. Check if the DCs can resolve each other using their DNSHostName. If not, this indicates some DNS misconfiguration
-- you need to fix that first.
1. Check if the both the DCs are pointing to the same DNS server (or DNS servers that are replica of each
other). Run: "ipconfig /all" and check its output. If not, correct the DNS client settings and run dcdiag after sometime.
2. Check if dynamic updates are "turned on" on the DNS server.
3. Try re-registering the DCs SRV records by either restarting netlogon service or by running the following
command:
nltest.exe /dsregdns
Similar Messages
-
A Global Catalog Server could not be located - All GC's are down SBS 2011
I have been searching through these forums and manage to find similar errors but am struggling to find an answer that applies to this me.
I seem to be having a number of issues with our SBS. I believe this was originally domain was previously on a SBS 2003 box before being moved to this SBS 2011 box last year, it has been running fine until yesterday. I cant see anything that has changed then
though.
Everything seems to point to DNS although I am struggling to pinpoint the actual cause. The most worrying is when I try to open something on the SBS such as AD sites and services.
the error is
Active Directory Domain Services - Naming information cannot be located because: The specified domain either does not exist or could not be contacted. Contact your system administrator to verify that your domain is properly configured and
is currently online.
Here is the IPconfig/all from the server
v
Host Name . . . . . . . . . . . . : SBS2012
Primary Dns Suffix . . . . . . . : Contosso.local
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : Yes
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : Contosso.local
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Intel(R) 82575EB Gigabit Network Connecti
on #2
Physical Address. . . . . . . . . : 00-1E-67-39-23-14
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8087:34f0:59f9:6a26%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.35.250(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.35.1
DHCPv6 IAID . . . . . . . . . . . : 301997671
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-39-46-22-00-1E-67-39-23-15
DNS Servers . . . . . . . . . . . : 192.168.35.250
NetBIOS over Tcpip. . . . . . . . : Enabled
PPP adapter RAS (Dial In) Interface:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : RAS (Dial In) Interface
Physical Address. . . . . . . . . :
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv4 Address. . . . . . . . . . . : 192.168.35.24(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.255
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{6E06F030-7526-11D2-BAF4-00600815A4BD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Teredo Tunneling Pseudo-Interface:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{A23E95B8-B5C2-4D88-BDE9-E9F1C2DD3902}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
and here is the nltest
nltest /server:sbs2012 /dsgetdc:contosso.local
DC: \\SBS2012.contosso.local
Address: \\192.168.35.250
Dom Guid: c50b6df3-9d22-4c87-b2a7-adadc4fd5ec1
Dom Name: contosso.local
Forest Name: contosso.local
Dc Site Name: Default-First-Site-Name
Our Site Name: Default-First-Site-Name
Flags: PDC GC DS LDAP KDC TIMESERV GTIMESERV WRITABLE DNS_DC DNS_DOMAIN
DNS_FOREST CLOSE_SITE FULL_SECRET WS
The command completed successfully
As far as I can see everything so far looks ok (highly possible I am missing something) but when I run a DCDIAG it gets messy
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = SBS2012
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Connectivity
......................... SBS2012 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SBS2012
Starting test: Advertising
Fatal Error:DsGetDcName (SBS2012) call failed, error 1355
The Locator could not find the server.
......................... SBS2012 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared. Failing SYSVOL replication problems may cause
Group Policy problems.
......................... SBS2012 passed test FrsEvent
Starting test: DFSREvent
......................... SBS2012 passed test DFSREvent
Starting test: SysVolCheck
......................... SBS2012 passed test SysVolCheck
Starting test: KccEvent
......................... SBS2012 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SBS2012 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SBS2012 passed test MachineAccount
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=Contosso,DC=local
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=Contosso,DC=local
......................... SBS2012 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\SBS2012\netlogon)
[SBS2012] An net use or LsaPolicy operation failed with error 67,
The network name cannot be found..
......................... SBS2012 failed test NetLogons
Starting test: ObjectsReplicated
......................... SBS2012 passed test ObjectsReplicated
Starting test: Replications
[Replications Check,SBS2012] DsReplicaGetInfo(PENDING_OPS, NULL)
failed, error 0x2105 "Replication access was denied."
......................... SBS2012 failed test Replications
Starting test: RidManager
......................... SBS2012 passed test RidManager
Starting test: Services
Could not open NTDS Service on SBS2012, error 0x5
"Access is denied."
......................... SBS2012 failed test Services
Starting test: SystemLog
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:27:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:32:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:37:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:42:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:47:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:52:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:09
Event String:
Driver EPSON WorkForce 645 Series required for printer EPSON WorkForce 645 Series is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver FX DocuCentre-IV C2270 PCL 6 required for printer scanner - 212 Manukau Rd Epsom is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:10
Event String:
Driver HP ePrint required for printer HP ePrint is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:11
Event String:
Driver PDF Complete Converter required for printer PDF Complete is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x00000457
Time Generated: 07/12/2013 08:54:14
Event String:
Driver Send To Microsoft OneNote 2010 Driver required for printer Send To OneNote 2010 is unknown. Contact the administrator to install the driver before you log in again.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 08:57:32
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:02:33
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
A warning event occurred. EventID: 0x00002724
Time Generated: 07/12/2013 09:03:32
Event String:
This computer has at least one dynamically assigned IPv6 address.For reliable DHCPv6 server operation, you should use only static IPv6 addresses.
An error event occurred. EventID: 0x0000041A
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on the local machine encountered a network error. The error was: 0x 2.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:03:33
Event String:
The DHCP/BINL service on this computer is shutting down. See the previous event log messages for reasons.
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:45
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0xC0002720
Time Generated: 07/12/2013 09:03:46
Event String:
The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:07:33
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0x00000406
Time Generated: 07/12/2013 09:12:34
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when Group Policy is successful.
An error event occurred. EventID: 0xC00038D6
Time Generated: 07/12/2013 09:16:24
Event String:
The DFS Namespace service could not initialize cross forest trust information on this domain controller, but it will periodically retry the operation. The return code is in the record data.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:17:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
An error event occurred. EventID: 0x0000041E
Time Generated: 07/12/2013 09:22:34
Event String:
The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Verify your Domain Name System (DNS) is configured and working correctly.
......................... SBS2012 failed test SystemLog
Starting test: VerifyReferences
......................... SBS2012 passed test VerifyReferences
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : Contosso
Starting test: CheckSDRefDom
......................... Contosso passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Contosso passed test CrossRefValidation
Running enterprise tests on : Contosso.local
Starting test: LocatorCheck
Warning: DcGetDcName(GC_SERVER_REQUIRED) call failed, error 1355
A Global Catalog Server could not be located - All GC's are down.
Warning: DcGetDcName(TIME_SERVER) call failed, error 1355
A Time Server could not be located.
The server holding the PDC role is down.
Warning: DcGetDcName(GOOD_TIME_SERVER_PREFERRED) call failed, error
1355
A Good Time Server could not be located.
Warning: DcGetDcName(KDC_REQUIRED) call failed, error 1355
A KDC could not be located - All the KDCs are down.
......................... Contosso.local failed test LocatorCheck
Starting test: Intersite
......................... Contosso.local passed test Intersite
I found a few people who have had similar issues that was caused by the "netlogon" service being paused or stopped but in my case it is set to automatically start and is running.
I have also posted this to serverfault (cant post links yet serverfault.com/questions/522691/a-global-catalog-server-could-not-be-located-all-gcs-are-down) added as there may be info there that may help.
Thanks for taking the time to read this, hopefully someone out there has come across this before or can offer something in regards to the next steps I should take.Some troubleshooting ideas:
0. Check if the DCs can resolve each other using their DNSHostName. If not, this indicates some DNS misconfiguration
-- you need to fix that first.
1. Check if the both the DCs are pointing to the same DNS server (or DNS servers that are replica of each
other). Run: "ipconfig /all" and check its output. If not, correct the DNS client settings and run dcdiag after sometime.
2. Check if dynamic updates are "turned on" on the DNS server.
3. Try re-registering the DCs SRV records by either restarting netlogon service or by running the following
command:
nltest.exe /dsregdns -
Zenworks Server could not be located
Hello,
we have a Problem to rollout a bundle the Error Message:
ActionMan.CouldNotLocateServer --> Bundle-Inhalt fr kopieren konnte nicht heruntergeladen werden, da kein ZENworks-Server gefunden wurde.
We Use ZCM 10.3.3
At first I thought its a problem with my Bundle so I make it a few times new in Other Variations. But Everytime when we want to rollout the Bundle we became the Error Message.
We use Zcm 10.3.3 still 2 weeks before we have the Version 10.3.1
I hope somebody can help us.
Thanks a lot and sorry about my very bad english ;-)
Greetings
Pascal
Edit:
In the LAN inside our zentral agency the bundle run perfect the error comes only in external agencys. We have round about 90, they are still connected over vpn in our zentral agencyHimberger,
> At first I thought its a problem with my Bundle so I make it a few
> times new in Other Variations. But Everytime when we want to rollout the
> Bundle we became the Error Message.
Can yo go into teh Z-icon, logging, delete log, enable verbose logging
(errors+warnings+diag), then retry the operation. Look in the log for
errors.
- Anders Gustafsson (NKP)
The Aaland Islands (N60 E20)
Novell has a new enhancement request system,
or what is now known as the requirement portal.
If customers would like to give input in the upcoming
releases of Novell products then they should go to
http://www.novell.com/rms -
IPhone Slightly Messed Up -The iphone softwae server could not be contacted
Okay so my iphone is kind of messed up. I have a music problem ( in that in speeds it up, even though i changed headphones and it randomly pauses music) i have a slowness issue like most people, but to get frm the lock screen to messages it takes a matter of minutes, it takes 1 minute to get to the screen for me to enter my password and a minute or two to type it in and load then another minute to get on messages! im really annoyed. apple are suppose to be the best company out but with so many problems with their iphones i am really not believing this!
whenever i try to restore my iPhone 3G, i get the message 'the iphone softwae server could not be contacted'. my network settings are FINE. as i am on the internet. what is going on!? it wouldn't work last night either. i want to get back to 3.0 without jailbreaking obviously.
i hate apple at the moment ¬_¬Okay so my iphone is kind of messed up. I have a music problem ( in that in speeds it up, even though i changed headphones and it randomly pauses music) i have a slowness issue like most people, but to get frm the lock screen to messages it takes a matter of minutes, it takes 1 minute to get to the screen for me to enter my password and a minute or two to type it in and load then another minute to get on messages! im really annoyed. apple are suppose to be the best company out but with so many problems with their iphones i am really not believing this!
whenever i try to restore my iPhone 3G, i get the message 'the iphone softwae server could not be contacted'. my network settings are FINE. as i am on the internet. what is going on!? it wouldn't work last night either. i want to get back to 3.0 without jailbreaking obviously.
i hate apple at the moment ¬_¬ -
Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: YbslikTaken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever -
Post Author: lkamesam
CA Forum: Integrated Solutions
Hi,
I am running Crystal Reports version 10 from IBM Rational 6.0.1 build 20050725_1800 XML data source. When I try to run the report under WAS 6.0.1 I get the following error:
Does any body have any clue how to resolve my problem? Thanks
Error 500: Error while defining class: com.crystaldecisions.data.xml.CRDB_XMLImpl This error indicates that the class: OCA.OCAdbdll.DbDLLOperations could not be located while defining the class: com.crystaldecisions.data.xml.CRDB_XMLImpl This is often caused by having the class at a higher point in the classloader hierarchy Dumping the current context classloader hierarchy: ==> indicates defining classloader *** indicates classloader where the missing class could have been found ==>[0] com.ibm.ws.classloader.CompoundClassLoader@163dd786 Local ClassPath: C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\classes;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\bobj_platform_jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cecore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\celib.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ceplugins.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cereports.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\cesession.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\clientlogic.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\Concurrent.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CorbaIDL.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLExternal.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CRDBXMLServer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCharting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalContentModels.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExporters.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalExportingBase.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalFormulas.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalQueryEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportEngine.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\CrystalReportingCommon.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\ebus405.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\icu4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jrcerom.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\jsf_common.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\keycodeDecoder.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\log4j.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\MetafileRenderer.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rasapp.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rascore.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\rpoifs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\serialization.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\URIUtil.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting-jsf.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\webreporting.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xercesImpl.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent\WEB-INF\lib\xmlParserAPIs.jar;C:\Documents and Settings\Administrator\IBM\rationalsdp6.0\workspace\sample1\WebContent; Delegation Mode: PARENT_FIRST [1] com.ibm.ws.classloader.JarClassLoader@338761606 Local Classpath: Delegation mode: PARENT_FIRST [2] com.ibm.ws.classloader.ProtectionClassLoader@38e75786 [3] com.ibm.ws.bootstrap.ExtClassLoader@7e475784 [4] sun.misc.Launcher$AppClassLoader@7e5a5784 [5] sun.misc.Launcher$ExtClassLoader@7e565784 -Original exception- java.lang.NoClassDefFoundError: OCA/OCAdbdll/DbDLLOperations at java.lang.ClassLoader.defineClass0(Native Method) at java.lang.ClassLoader.defineClass(ClassLoader.java(Compiled Code)) at java.security.SecureClassLoader.defineClass(SecureClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader._defineClass(CompoundClassLoader.java:576) at com.ibm.ws.classloader.CompoundClassLoader.findClass(CompoundClassLoader.java(Compiled Code)) at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java(Compiled Code)) at java.lang.ClassLoader.loadClass(ClassLoader.java(Compiled Code)) at com.crystaldecisions.reports.queryengine.driver.i.<init>(Unknown Source) at com.crystaldecisions.reports.queryengine.driver.i.case(Unknown Source) at com.crystaldecisions.reports.queryengine.av.ak(Unknown Source) at com.crystaldecisions.reports.queryengine.av.else(Unknown Source) at com.crystaldecisions.reports.queryengine.av.byte(Unknown Source) at com.crystaldecisions.reports.queryengine.av.do(Unknown Source) at com.crystaldecisions.reports.queryengine.as.new(Unknown Source) at com.crystaldecisions.reports.queryengine.at.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.b(Unknown Source) at com.crystaldecisions.reports.reportdefinition.cy.long(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.a(Unknown Source) at com.crystaldecisions.reports.common.ab.a(Unknown Source) at com.crystaldecisions.reports.common.ab.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.if(Unknown Source) at com.crystaldecisions.reports.reportdefinition.a1.o(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.a.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.a(Unknown Source) at com.crystaldecisions.reports.reportengineinterface.JPEReportSourceFactory.createReportSource(Unknown Source) at com.crystaldecisions.report.web.a.a.K(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.aa.a(Unknown Source) at com.crystaldecisions.report.web.event.bx.a(Unknown Source) at com.crystaldecisions.report.web.event.b1.broadcast(Unknown Source) at com.crystaldecisions.report.web.event.as.a(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.if(Unknown Source) at com.crystaldecisions.report.web.WorkflowController.doLifecycle(Unknown Source) at com.crystaldecisions.report.web.ServerControl.a(Unknown Source) at com.crystaldecisions.report.web.ServerControl.processHttpRequest(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ServerControlTag.doEndTag(Unknown Source) at com.crystaldecisions.report.web.viewer.taglib.ReportServerControlTag.doEndTag(Unknown Source) at com.ibm._jsp._sample._jspx_meth_crviewer_viewer_0(_sample.java:135) at com.ibm._jsp._sample._jspService(_sample.java:77) at com.ibm.ws.jsp.runtime.HttpJspBase.service(HttpJspBase.java:88) at javax.servlet.http.HttpServlet.service(HttpServlet.java:856) at com.ibm.ws.webcontainer.servlet.ServletWrapper.service(ServletWrapper.java:1212) at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:629) at com.ibm.wsspi.webcontainer.servlet.GenericServletWrapper.handleRequest(GenericServletWrapper.java:117) at com.ibm.ws.jsp.webcontainerext.JSPExtensionServletWrapper.handleRequest(JSPExtensionServletWrapper.java:171) at com.ibm.ws.jsp.webcontainerext.JSPExtensionProcessor.handleRequest(JSPExtensionProcessor.java:230) at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:2837) at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:220) at com.ibm.ws.webcontainer.VirtualHost.handleRequest(VirtualHost.java:204) at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:1681) at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:77) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:421) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:367) at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:276) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminaters(NewConnectionInitialReadCallback.java:201) at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:103) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.requestComplete(WorkQueueManager.java:548) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.attemptIO(WorkQueueManager.java:601) at com.ibm.ws.tcp.channel.impl.WorkQueueManager.workerRun(WorkQueueManager.java:934) at com.ibm.ws.tcp.channel.impl.WorkQueueManager$Worker.run(WorkQueueManager.java:1021) atFor those who would have the same problem, here is how I could eventually fix it.
Since the Flex Test Drive is sometimes out of sync with flash builder 4, I recreated a project using other help pages on Adobe site :
Entry point :
http://help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08- 7ffd.html
As suggested, I used the New Project wizard to create a new project, with :
Application server type : J2EE
Check the radio button "Use remote object access service : BlazeDS"
Then, as indicated in following pages (section "Accessing BlazeDS")... :
file:///C:/Mes%20documents%20C/Commun/Developpement/Documentation/HT-Tracks/AccessingData/ help.adobe.com/en_US/Flex/4.0/AccessingData/WSbde04e3d3e6474c4-668f02f4120d422cf08-7ffe.ht ml#WSbde04e3d3e6474c4-19a3f0e0122be55e1b7-8000
...I selected the "Data / Connect to Data/Services..." menu option, which started the Data/service connection wizard.
There, I selected a BlazeDS (and not Web Services) service type, and everything went fine.
Suggestion to adobe staff : maybe it would be useful to update the Flex Test Drive to reflect Flash Builder 4 ?
Very nice product anyway, so far, congratulations...
Rgds
Marc. -
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent
Dear all,
i have a Windows 2008 Server (X64) with SQL 2005 SP3 and some troubels...
The SQL works since some week, this week we installed SQL SP3 and change of the local Admin password.
Yesterday we reboot the Server, now the SQL Server Agent is unable to start!
The SQL Server is up and running,
Errorlog:
2009-11-06 09:49:52.56 Server Microsoft SQL Server 2005 - 9.00.4035.00 (X64)
Nov 24 2008 16:17:31
Copyright (c) 1988-2005 Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.0 (Build 6002: Service Pack 2)
2009-11-06 09:49:52.56 Server (c) 2005 Microsoft Corporation.
2009-11-06 09:49:52.56 Server All rights reserved.
2009-11-06 09:49:52.56 Server Server process ID is 5912.
2009-11-06 09:49:52.56 Server Authentication mode is WINDOWS-ONLY.
2009-11-06 09:49:52.56 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG'.
2009-11-06 09:49:52.56 Server This instance of SQL Server last reported using a process ID of 4424 at 11/6/2009 9:43:23 AM (local) 11/6/2009 8:43:23 AM (UTC). This is an informational message only; no user action is required.
2009-11-06 09:49:52.56 Server Registry startup parameters:
2009-11-06 09:49:52.56 Server -d C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\master.mdf
2009-11-06 09:49:52.56 Server -e C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\LOG\ERRORLOG
2009-11-06 09:49:52.56 Server -l C:\Program Files\Microsoft SQL Server\MSSQL.1\MSSQL\DATA\mastlog.ldf
2009-11-06 09:49:52.59 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2009-11-06 09:49:52.59 Server Detected 4 CPUs. This is an informational message; no user action is required.
2009-11-06 09:49:52.67 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2009-11-06 09:49:52.71 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required.
2009-11-06 09:49:53.73 Server Database mirroring has been enabled on this instance of SQL Server.
2009-11-06 09:49:53.73 spid4s Starting up database 'master'.
2009-11-06 09:49:53.86 spid4s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
2009-11-06 09:49:53.95 spid4s SQL Trace ID 1 was started by login "sa".
2009-11-06 09:49:53.97 spid4s Starting up database 'mssqlsystemresource'.
2009-11-06 09:49:53.99 spid4s The resource database build version is 9.00.4035. This is an informational message only. No user action is required.
2009-11-06 09:49:54.16 spid9s Starting up database 'model'.
2009-11-06 09:49:54.17 spid4s Server name is 'VIE-EU-ARC-02'. This is an informational message only. No user action is required.
2009-11-06 09:49:54.19 Server The certificate was successfully loaded for encryption.
2009-11-06 09:49:54.19 Server Server is listening on [ 'any' <ipv6> 1433].
2009-11-06 09:49:54.19 Server Server is listening on [ 'any' <ipv4> 1433].
2009-11-06 09:49:54.19 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSSQLSERVER ].
2009-11-06 09:49:54.19 Server Server local connection provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-11-06 09:49:54.19 Server Server is listening on [ ::1 <ipv6> 1434].
2009-11-06 09:49:54.19 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2009-11-06 09:49:54.19 Server Dedicated admin connection support was established for listening locally on port 1434.
2009-11-06 09:49:54.31 Server SQL Server is now ready for client connections. This is an informational message; no user action is required.
2009-11-06 09:49:54.33 spid15s Starting up database 'AdventureWorks'.
2009-11-06 09:49:54.33 spid16s Starting up database 'EnterpriseVaultDirectory'.
2009-11-06 09:49:54.33 spid14s Starting up database 'Test'.
2009-11-06 09:49:54.33 spid12s Starting up database 'AdventureWorksDW'.
2009-11-06 09:49:54.33 spid17s Starting up database 'EnterpriseVaultMonitoring'.
2009-11-06 09:49:54.33 spid13s Starting up database 'msdb'.
2009-11-06 09:49:54.33 spid23s Starting up database 'EVVSExchangeVaultStore_2'.
2009-11-06 09:49:54.33 spid22s Starting up database 'EVVSGVIE_2_2'.
2009-11-06 09:49:54.33 spid24s Starting up database 'EVVSJournalVaultStore_3'.
2009-11-06 09:49:54.33 spid19s Starting up database 'EVVSVIEIT_1'.
2009-11-06 09:49:54.33 spid21s Starting up database 'ReportServerTempDB'.
2009-11-06 09:49:54.33 spid20s Starting up database 'ReportServer'.
2009-11-06 09:49:54.33 spid18s Starting up database 'EVVSGVIEIT_1_1'.
2009-11-06 09:49:54.56 spid9s Clearing tempdb database.
2009-11-06 09:49:54.61 spid19s CHECKDB for database 'EVVSVIEIT_1' finished without errors on 2009-10-28 18:06:14.107 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.65 spid23s CHECKDB for database 'EVVSExchangeVaultStore_2' finished without errors on 2009-11-04 18:05:33.960 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.71 spid24s CHECKDB for database 'EVVSJournalVaultStore_3' finished without errors on 2009-11-04 18:05:51.793 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.75 spid16s CHECKDB for database 'EnterpriseVaultDirectory' finished without errors on 2009-11-04 18:06:38.103 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.83 spid17s CHECKDB for database 'EnterpriseVaultMonitoring' finished without errors on 2009-11-04 18:06:18.570 (local time). This is an informational message only; no user action is required.
2009-11-06 09:49:54.99 spid4s Recovery of any in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC) has completed. This is an informational message only. No user action is required.
2009-11-06 09:49:55.55 spid9s Starting up database 'tempdb'.
2009-11-06 09:49:55.68 spid4s Recovery is complete. This is an informational message only. No user action is required.
2009-11-06 09:49:55.68 spid12s The Service Broker protocol transport is disabled or not configured.
2009-11-06 09:49:55.68 spid12s The Database Mirroring protocol transport is disabled or not configured.
2009-11-06 09:49:55.72 spid12s Service Broker manager has started.
Only the SQL Server Agent is unable to start,
Eventlog:
Log Name: Application
Source: SQLSERVERAGENT
Date: 06.11.2009 10:09:52
Event ID: 103
Task Category: Service Control
Level: Error
Keywords: Classic
User: N/A
Computer: vie-eu-arc-02.global.domain
Description:
SQLServerAgent could not be started (reason: Unable to connect to server '(local)'; SQLServerAgent cannot start).
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLSERVERAGENT" />
<EventID Qualifiers="16384">103</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2009-11-06T09:09:52.000Z" />
<EventRecordID>8486</EventRecordID>
<Channel>Application</Channel>
<Computer>vie-eu-arc-02.global.domain</Computer>
<Security />
</System>
<EventData>
<Data>Unable to connect to server '(local)'; SQLServerAgent cannot start</Data>
</EventData>
</Event>
SQLAgent.out Logfile:
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [000] Unable to connect to server '(local)'; SQLServerAgent cannot start
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Shared Memory Provider: No process is on the other end of the pipe. [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [298] SQLServer Error: 233, Client unable to establish connection [SQLSTATE 08001]
2009-11-06 10:09:52 - ! [382] Logon to server '(local)' failed (DisableAgentXPs)
2009-11-06 10:09:53 - ? [098] SQLServerAgent terminated (normally)
Additional the SQL Server Management Studio is unable to logon to the Server:
TITLE: Connect to Server
Cannot connect to vie-eu-arc-02.
ADDITIONAL INFORMATION:
A connection was successfully established with the server, but then an error occurred during the pre-login handshake. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (Microsoft SQL Server, Error: 233)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
The local Admin Password was reset to the "original" (after install) one.
Any ideas how to fix the problem?Dear all,
the encryption was NO on all protocols.
Because no additional ideas available, i uninstalled the SQL Server on friday.
At the Re-Install Process i got again an error:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
The install process failed.
On google i found the same problem in an other thread:
http://groups.google.com/group/microsoft.public.sqlserver.connect/browse_thread/thread/dbec4a9a271f69a6/7cd22694da3a6062?lnk=st&q=%22Shared+Memory+Provider%3A+No+process+is+on+the+other+end+of+the+pipe%22&rnum=2&hl=en#7cd22694da3a6062
++++++
During the installation process of SQL Server 2005, Setup complains it cannot
connect to the database service for server configuration. The error was:
[Microsoft][SQL Native Client]Shared Memory Provider: No process is on the
other end of the pipe .
I have checked that the pipe exists (\\.\pipe\SQLLocal\MyInstance), but
everytime the installer attempts the connecting the pipe is closed by the
server and another is reopened. That's why the Client says there is no
process on the other end of the pipe.
I have re-installed 'everything', tried connections via TCP, but nothing
works.
I have made a small application to connect to the pipe and noticed that
there are 3 instances of the pipe running, one that I am connecting to, and 2
listening pipes. If I write to 'my' pipe SQL server disconnects the pipe and
reopens another too. The difference is that SQL server writes an error
message in the log file. No such luck when the Native client is doing the
same.
What more can I do?
++++++
and an answer
++++++
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I renamed it to another name and re-installed sql server.
I noticed that sql server ERRORLOG complained about certificate that it
couldn't load and the generation of a self-generaed certificate (see below)
"2005-12-10 21:01:02.30 Server The server could not load the
certificate it needs to initiate an SSL connection. It returned the following
error: 0x8009030d. Check certificates to make sure they are valid.
2005-12-10 21:01:02.49 Server A self-generated certificate was
successfully loaded for encryption."
Now the installation succeeded
++++++
With Windows 2008 it was really a challange to get access to this folder (!!!)
After clearing the folder the ReInstall of SQL Server works fine.
Now the SQL Server & the SQL Server Agent works again.
The problem was anything with encryption, old certs & files.
I don't think that everyone can afford reinstalling SQL server.
I finaly found the problem to be the certificate used.
I noticed that a certificate was added to the machinekeys just recently.
(in C:\Documents and Settings\All Users\Application
Data\Microsoft\Crypto\RSA\MachineKeys)
I think this is what the following blog was saying , a problem with certification
http://blogs.msdn.com/sql_protocols/archive/2006/07/26/678596.aspx
Cheers
Please mark as answer if you think this answers your questions -
ITunes: "The iPhone software update server could not be contacted"
Could someone please help me with a problem that I´m having with iTunes that´s really annoying. I want to update my iPhone 3G with the latest 3.0 software. For the first time ever iTunes is giving me the following message every time I try to update (been for more than 24 hours now):
+The iPhone software update server could not be contacted. Make sure your network settings are correct and your network connection is active, or try again later.+
I also get a message if I try to click on the update itunes( not that I need to, as it updated to iTunes 8.2 earlier this month) but still I figure it´s all part of the same problem:
+The iTunes update server could not be contacted. Please check your Internet connection, or try again later.+
Solutions tried so far:
* Going through my internet connection settings - I´m connected to the internet with no problems!
* Changing from wifi to wired connection - same thing, can´t update
* Reinstalling itunes (twice) - no difference
* Switching off Netbarrier
I don´t know what else I can do. I´m beginning to think it may be related to either iTunes being updated to 8.2 or one of the many recent software updates apple has been sending us of Mac OS. My computer is got all recent updates.
Please help!Thanks for the response. Yeah I'd seen that a lot of these issues in the past had mainly affected Windows users. Anyway I tried naming a new location and no success and I don´t really understand the last post in that thread. There is no "check for updates" under the help menu. It's only in the itunes menu and that´s what I keep trying to do with the same message.
Anyway it's clear to me now that it's not a local connection issue nor an iPhone server issue. I've since upgraded to the 3.0 software via a Windows PC without any problems and without having to sync all the music and stuff which is a relief. Afterwards, when I put it back into my Mac all it asked me to do was a backup and nothing else had been synced (or wiped) so the immediate problem is out of the way. It's just this remaining issue now that iTunes still won´t connect to update servers although it does connects to the itunes store all ok. Any other ideas before I call Apple on Monday? -
Error message received: The iTunes update server could not be contacted
Please help! I'm using a windows 7 laptop. The iTunes store is not displaying images, and if I try to import a CD it will not access the gracenote database for track info.Tried updating but got the error message 'the itunes update server could not be contacted'. I'm accessing the internet via a Tmobile dongle and all other web content is working . I have uninstalled and reinstalled itunes, checked my driver are up to date and that my AVG firewall allows iTunes through.I have disabled the windows firewall.I tried disabling the AVG one completely too but that had no effect so I'm stuck - can anyone help?
Not sure if you already fixed this problem or not, but I recently upgraded my laptop to Win7 and ran into the same issue. My Internet connection was working fine, I could even browse the store within iTunes, just couldn't download any software or firmware updates. I fixed it by editing the "hosts" file located in the C:\Windows\System32\drivers\etc folder. Open it in notepad with admin rights (right click notepad & select "Run as administrator"). Uncomment (delete the hash symbol "#") the last 2 lines or the ones that consist of "127.0.0.1 localhost" and "::1 localhost". Restart iTunes and see if this works (if you haven't already found a solution).
-
Skge_sign_fr could not be located in the dynamic link library orageneric11.
Hi Guyz,
I am using Oracle 11.1.0 on Windows 2003 R2 Server, there was no problem. I tried to install Oracle 10g Grid Control and after that tried to configure Oracle Gateway 11g on the same Oracle_home. But unfortunately both installations were failed. Enterprise manager service also failed.
Now I am unable to connect to sqlplus and following error displayed.
" The procedure entry point skge_sign_fr could not be located in the dynamic link library orageneric11.dll. "
Please help me to resolve the issue.
Regards,
Rizi10g Grid Control and 11g Gateway into the SAME Oracle_Home? The message states clearly there's a version mismatch (10g objects in a 11g home). Deinstall completely and then reinstall - following strictly the installation guides.
-
When starting the iPlanet Calendar Server(iCS) 2.x on Windows NT, the following
error occurs:<BR>
<P>
The procedure entry point _chkesp could not be located in the dynamic link
library MSVCRT.dll
<P>
There are two ways to ensure that you have the correct version of the
MSVCRT.dll file.<BR>
<P>
<OL>
<LI>Install the latest Netscape Communicator browser, which will update the
MSVCRT.dll file to the
correct version.
<P>
<LI>Copy the MSVCRT.dll
file from a system that has the latest Communicator browser to the iCS
system.
</OL>
<P>
The calendar server should now start up.For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
Not an error message I recognise personally but the error has the same pattern as those discussed in the first and third boxes, suggesting that you've got an outdated .dll file that needs replacing. You should find AVFoundationCF.dll in the Apple Application Support folder. Delete it and then repair Apple Application Support. If that doesn't work go for the full tear down and rebuild.
tt2 -
The Sun Java System Application Server could not start
Hello All,
I downloaded the Java Pet Store example from sun's website and followed the instructions for installation. After successful installation, I tried to deploy the project and gave the following error
C:\Documents and Settings\sina\My Documents\Projects\services\nbproject\build-impl.xml:194: Deployment error:
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
See the server log for details.
BUILD FAILED (total time: 5 minutes 20 seconds)
The link above points to the following line in the build-impl.xml file
<nbdeploy debugmode="false" forceRedeploy="${forceRedeploy}" clientUrlPart="${client.urlPart}" clientModuleUri="${client.module.uri}"/>
Can any one help whats wrong.An early response will be highly appreciated.
Kind Regards.
Hasnain Javed.Hi,
Maybe you already got this fix but here is a suggestion, a snippet from the readme index,html of the petstore download
# Start the Sun Java System Application Server and the JavaDB database. To do so, open a command prompt and change directory to <javaeesdk.home>/bin and issue the following commands:
asadmin start-database
asadmin start-domain
# Change directory to <petstore.home> and enter the following commands
ant setup
ant run
This will setup, build and deploy the petstore on the application server, and then launch the application homepage in your default browser.
The "ant setup" that you run from <petstore.home> (petstore.home is the directory where petstore is installed or where you unzipped it) will populate the database wth data and setup the proper database tables etc that are used by the application.
hth,
Sean -
Sun Java System Application Server could not start
Hi
I have installed JDK1.5 Update1 + netbeans 5.5 with the JBOSS bundle and added the Sun Java System Application Server 9.1.02.
I am creating the EJB-JMS application described at
http://www.netbeans.org/kb/55/ejb30.html
All the steps are followed properly, but while running the project i get the error
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
D:\MyNBProjects\EJBAPP1\nbproject\build-impl.xml:183: Deployment error:
The Sun Java System Application Server could not start.
More information about the cause is in the Server log file.
Possible reasons include:
- IDE timeout: refresh the server node to see if it's running now.
- Port conflicts. (use netstat -a to detect possible port numbers already used by the operating system.)
- Incorrect server configuration (domain.xml to be corrected manually)
- Corrupted Deployed Applications preventing the server to start.(This can be seen in the server.log file. In this case, domain.xml needs to be modified).
- Invalid installation location.
See the server log for details.
BUILD FAILED (total time: 5 minutes 3 seconds)Hi Roman,
Sorry for the long wait....
In the mean time I have downloaded NB6.1 (final Release) and JDK 1.6.0_04,added the sjsas-9_1_02 to NB6.1, all are in D:\javak (where previous setup of NB5.5 and jdk1.5 and SJSAS-9_1_02 is AS IS in D:\java)
Current Scenario:
Product Version: NetBeans IDE 6.1 (Build 200805300101)
Java: 1.6.0_04; Java HotSpot(TM) Client VM 10.0-b19
System: Windows XP version 5.1 running on x86; Cp1252; en_US (nb)
Userdir: D:\Documents and Settings\kedar\.netbeans\6.1
Now, when i try to Run the SAME code i get the following error:
Created dir: D:\ProjectsNB\EJBAPP1\dist
Building jar: D:\ProjectsNB\EJBAPP1\dist\EJBAPP1.ear
post-dist:
dist:
pre-run-deploy:
Initial deploying EJBAPP1 to D:\ProjectsNB\EJBAPP1\dist\gfdeploy
Error during incremental deploy: java.lang.NullPointerException
Start registering the project's server resources
Finished registering server resources
java.lang.NullPointerException
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.getFileArchive(DirectoryDeploymentFacility.java:264)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:168)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeployment.initialDeploy(DirectoryDeployment.java:413)
at org.netbeans.modules.j2ee.sun.ide.j2ee.incrdeploy.DirectoryDeploymentFacade.initialDeploy(DirectoryDeploymentFacade.java:218)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.deploy(TargetServer.java:519)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:151)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
java.lang.IllegalStateException: cannot find FileArchive class...
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:170)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeployment.initialDeploy(DirectoryDeployment.java:413)
at org.netbeans.modules.j2ee.sun.ide.j2ee.incrdeploy.DirectoryDeploymentFacade.initialDeploy(DirectoryDeploymentFacade.java:218)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.deploy(TargetServer.java:519)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:151)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
Deployment error:
cannot find FileArchive class...
See the server log for details.
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:166)
at org.netbeans.modules.j2ee.ant.Deploy.execute(Deploy.java:104)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor112.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:105)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1329)
at org.apache.tools.ant.Project.executeTarget(Project.java:1298)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1181)
at org.apache.tools.ant.module.bridge.impl.BridgeImpl.run(BridgeImpl.java:277)
at org.apache.tools.ant.module.run.TargetExecutor.run(TargetExecutor.java:460)
at org.netbeans.core.execution.RunClassThread.run(RunClassThread.java:151)
Caused by: java.lang.IllegalStateException: cannot find FileArchive class...
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:194)
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeployment.initialDeploy(DirectoryDeployment.java:413)
at org.netbeans.modules.j2ee.sun.ide.j2ee.incrdeploy.DirectoryDeploymentFacade.initialDeploy(DirectoryDeploymentFacade.java:218)
at org.netbeans.modules.j2ee.deployment.impl.TargetServer.deploy(TargetServer.java:519)
at org.netbeans.modules.j2ee.deployment.devmodules.api.Deployment.deploy(Deployment.java:151)
... 16 more
Caused by: java.lang.IllegalStateException: cannot find FileArchive class...
at org.netbeans.modules.j2ee.sun.bridge.DirectoryDeploymentFacility.initialDeploy(DirectoryDeploymentFacility.java:170)
... 20 more
BUILD FAILED (total time: 9 seconds)
Thanks,
Kedar. -
I just downloaded and installed the latest iTunes and Safari update. It required a reboot, and after the PC restarted I was greeted with this error message:
AppleSyncNotifier: The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library QLite3.dll.
First time to ever see this one. I can only presume that it is a bug. But any help to correct the problem will be greatly appreciated.
TIAI received a note to do the regular Apple Software Update for iTunes, Quicktime and Safari, then I faced a big problem from that exact same messages, I could not sleep, and I could not go to work and I cannot make any phone calls.
I did not imagine that one day I'll see this intransigence and irony Carried out by Apple with humans, this makes us lose confidence in their products. Because they are interested in selling their products only and do not provide any service to their clients. And to help us solve problems that result from the method of maximum protection of their software. But I think that there is no any point in calling them and asked for their help and support. Where they do not show any initiative to help resolve the problemsThis indicates that they intend to do that, Believe it or not this problem has caused great damage and loss to me, Since I had 4 iPhones, And all my friends advised me to get rid of them and sell and never buy this products again, even if selling them at a loss because the Apple company abandon its responsibility to serve and assist their customers by support -
The DataSource with the JNDI name: contentDataSource could not be located
Hello,
We try to deploy our system/application to the servers that structed as
Machine one has:
1 administration domain
1 managed domain
Machine two has :
1 managed domain which is administrated by machine one.
I was trying to deploy the UI(portal application) to managed domain under Machine one. I got
error message as following:
Exception:weblogic.management.ApplicationException: activate failed for content.jar Module: content.jar Error: Exception activating module: EJBModule(content.jar,status=PREPARED) Unable to deploy EJB: ValueBean from content.jar: [EJB:011028]The DataSource with the JNDI name: contentDataSource could not be located. Please ensure that the DataSource has been deployed successfully and that the JNDI name in your EJB Deployment descriptor is correct.
I have portalFrameworkPool Data Sources deployed to both managed domains.
when I deploy the application to the server that has one one domain(both adminstrator domain and application domain are in one), it is fine.
Can some one with same experience, or BEA people provide some help on this? Very appreciate any help on this issue.
Thanks in advance.
Christina:-p
If you go to each Managed Server on the console, you can see the Service tab and then go to JDBC. Under JDBC you can see all the pool connections. Instead of localhost they should be pointing to the specific hostname or ip address of the adminserver and the pointbase port on that server (9093 by default) so the EAR files can be correctly deployed and then the JNDI Tree will look exactly the same on both servers. Change all the connection pools to use the specific hostname instead of localhost. Hope this works for you.
Maybe you are looking for
-
Crystal Reports XIr2 with BOXI 3.1 - compatible for universes?
Hello, running CR XI ver 2 and when I try to refrest a report instance that was built on a CA service desk universe, recieve this error upon opening the report::This report was created with a version of crystal reports which is later than the version
-
iMovie got accidently wiped from my MacBook and now when I try to re-install it, it won't allow me because an eligible copy of iMovie isn't present. Any tips on how to fix it?
-
No keyboard when installing Windows XP on Satellite P300 PSPCCA
Ok I just got my new 500GB HDD and slipstreamed XP with the SATA drivers so XP can see the HDD and that part works fine. But now after XP loads its files and I get to the part where you can choose between setting up XP on the selected partition (ENTE
-
Loading an image from CameraRoll - how long should it take ?
Hi All I'm loading an image from the CameraRoll using this method http://www.flashandmath.com/mobile/cameraroll/ Now on my iPad2 the image loads pretty instantaneously However on my iPhone4 it takes approx 8 seconds for the image to load. ( The time
-
My slotomania app is not loading. This has been going on for 3 days ever since I followed the app store prompt to upgrade.