A good DTP package to replace LibraOffice?

The installation or lack there off of Libre Office should have no effect on the files previously created with it.
That fact that its not correctly installed means files saved in Libre Office's native formats are simply not able to be opened correctly with anything else. In other word you need Libre Office to open Libre Office formatted documents.
Once you manage to install Libre office correctly, and open your files in Libre Office I'm sure your files will be o.k.
For best compatibility with other Office products, I suggest saving your files in Microsoft Office formats rather than Libre Office's native formats.
As has been said by others, Libre Office remains the bets free alternative to paid Office products.

Similar Messages

I downloaded CS6 Red Plug-In and added to Package Contents, replaced the current files with the new without backing up, now my RED footage thumbnails and color-correction don't WORK! How do I get my old importerRed file back!!?? HELP!

I downloaded CS6 Red Plug-In and added to Package Contents, replaced the current files with the new without backing up, now my RED footage thumbnails and color-correction don't WORK! How do I get my old importerRed file back!!?? HELP!

Try asking in the Premiere Pro forum seems to be an Adobe Lab for Premiere Pro

Ed a good photo package,not expensive

need a good photo package not too expensive,suggestion please.also need to order on same.

i am quite good at photography as i used to weddings at one time.now i just need a good package where i can make changes ie. paint out a street lamp over someones head,i know it much but it does happen.red eye is a big problem.odd times i like to take out lights in the photo to take away the centre of attraction in the picture,like on a cruise ship photo.lots of lights in view.after doing all this can they be ordered through you for prints?

Issue when number of records in a DSO exceeds DTP package size

Hi all,
I'm having a strange problem with the package size of my DTPs.
I move data from a DSO to another one while performing some transformations in an Export routine. The DTP has a package size of 6 million records.
When the number of records in the first DSO exceeds the package size, some of the records seem not to be processed properly by the transformation and this forces me to choose a very large number for the package size so that the ABAP code in the transformation is processed for all the records of the source DSO.
I can't understand why this is happening because package size is only supposed to determine the number of records to be processed in a single step and nothing else.
Am I right?
Thanks

My tip would also be the summary item

What's a good 3rd party iPhoto replacement?

I have a large number of slideshows which I’ve made with iPhoto 7.1.5 to which I have applied carefully-adjusted effects settings and music for each slide. They are as perfect as I can get them for my usage. I have tried both importing as well as totally re-doing some of them from scratch in iPhoto 9.1.3 with no success. My settings will not stick in 9.1.3 (yes I have looked at all the other posts and tried the fixes offered in this forum but to no avail) and I do not like the theme based format at all. I like full screen slides with ONLY the settings and syncronization that I have applied to each slide, all of which has worked perfectly for me in 7.1.5.
My great fear is that although my present iMac has and is working perfectly, one day I will have to replace it and whatever new one I get might most likely not run iPhoto 7.1.5 so all of my work could be lost.
I am prepared to drop iPhoto usage altogether and work with a good third party application that will allow me to individually set my slides as I want them set without forcing me to use some theme or other (as the new iPhoto and some third party apps seem to do) and to which I can perfectly synchronize music to the flow of the slides just like I’m able to do in 7.1.5.
My question then is what would be a good third party application for this purpose? Again I am perfectly willing to redo all of the shows from scratch in that new app if it will work the way I’ve described.
Thanks to all for reading this lengthy post :-)
Rick

Hello Steven,
As promised I’m letting you know my decision on replacing iPhoto with Aperture for making slideshows. I’m going with Aperture. As a test I imported the iPhoto 7.1.5 pictures from two of my longest and most complex slideshows (no problem at all with that) so as to give Aperture a good tryout. Using the “Classic” mode when choosing themes (actually no theme at all) I was able to very easily rebuild the two shows I was testing. In those two shows each slide is individually timed to the phrases and tempo of the musical background, no easy task in iPhoto 7 but a cinch in Aperture. I noticed a close resemblance to iPhoto 11 ( the newest version) in setting those individual slides, but with Aperture all of the settings I made actually stuck! That was my main frustration with the newest iPhoto and was the reason I was looking for a replacement in the first place.
All of the effects used for each individual slide were also easy to redo. So the remaking of slideshows from iPhoto is not at all difficult; that is once you’ve figured out the way things are done in Aperture. That took a little time and was occasionally frustrating. I found that just quitting for awhile and resuming the job later was very helpful but once learned, it’s just fine. There is a downloadable PDF manual, which is more or less helpful, but digging in and getting to work on a project is still the best way to learn the application . . . for me, that is ;-)
Although I use Photoshop Elements for processing my shots before using them in slideshows I found that it’s really handy to use Aperture’s many photo retouching tools on the fly when building slideshows. Something that is very limited in iPhoto. It’s possible that some people may find that those built-in tools are all they need for spiffing up their photos with no need for other applications for that purpose. In my case, I’ll stick with PE for that if for no other reason than that I’m used to using it (and also already have it :-) ).
There are lots of other features available in Aperture that I haven’t yet checked out but that will be something for me to play with later once I get all my slideshows transferred over.
For TD, thanks again for the tip on PhotoToMovie. I gave it a try also but found that it played havoc with the quality of my photos. Once I saw that, I stopped checking it out. Too bad since it is about a quarter of the price of Aperture.
Rick

How good is LR at replacing physical ND filter?

How good is LR's ND filter function? Can it replace a physical ND filter? Once you blow highlight, I doubt any software can recover to a decent degree. What are the limitations of LR's ND filter function then?

I wasn't aware that LR 4 even had an ND filter function. Hard to imagine such a thing would do anything more than attenuate all brightness levels in a color-blind way, similar to the expoure slider, or dragging down the right-side of the tone-curve. This might recover 2-stops or so of "blown" highlights, but since it's a "morning after" tool, it won't help you blur water, or any of the other things ND filters do--basically by allowing slower shutter speeds at the time of capture.
Now if you are talking about the graduated filter, that can be very useful for attenuating skiy brightness for a better balnce with the ground below. Again, if the sky is blown by more than about two stops, it won't create lost detail. But two stops is a lot of recovery, often enough to restore significant detail. Yes, this one can go a long way to replacing a physical graduated ND filter, but the photog must be careful not to blow out the highlights too much.
Ultimately the limitation of any exclusively-software solution to an excessive dynamic range shooting situation manifests as noise in the shadows.
Jerry

Good Calendar Package?

I'm not much of a programmer. I wonder if anyone can suggest
a good package for creating a calendar for my group's web page. We
would want to display events and have links to more information and
a link to a shopping cart.

I'm not much of a programmer. I wonder if anyone can suggest
a good package for creating a calendar for my group's web page. We
would want to display events and have links to more information and
a link to a shopping cart.

Import Overwrite package: Customize replace key

Hi everybody.
Is it possible to customize the replacing coordinates while using the "Import Overwrite" package?
I mean: in the pop-up window (see image) the default "region" has Entity, Category, Time and Audit ID; well I would like to also choose INTCO dimension. Is it possible somehow?
Thank you so much for your help!

Hi Sergio,
Not possible. Look on the chain...
You can create your own chain but it depends on your detailed requirements.
B.R. Vadim

What Are Some Good API Packages For Bar Code Scanners?

Hi,
I am trying to write a program where a user can scan a bar code on a part and it's information will be matched on our database and retrieved from there. My main problem is finding a good package and method to take bar code scanner inputs on a desktop computer.
If any one could point me in the right direction, that would be very helpful.
Thank you,
~B

There aren't any classes in the API to do that, but there are 3rd party libraries that can do that. Just google.
Kaj

What are some good Plugin packages for Logic - must be Leopard Compatible

I'm new to Logic, heck, Mac in general. On my PeeCee I used Nuendo v.1 and had the Waves Diamond Bundle. I'm looking for something with comparable abilities that's Leopard compatible. Also, I really can't afford the Waves stuff at this point, price is a HUGE consideration for me.
I'm seriously considering going to Logic Studio (use Express right now) to gain the multitude of instruments and Plugins. In your experience, are the plugins included in Logic Studio good enough that I'd get what I need using them and not have to find another package (for the time being at least)?
Thanks in advance for your help!

There aren't any classes in the API to do that, but there are 3rd party libraries that can do that. Just google.
Kaj

Any ideas for a good accounting package?

Hi, I'm not sure where to post this, so if I have the wrong forum, my apologies... This is my first post! I'm looking for software like quickbooks premium that is an accounting package that tracks inventory, produces invoices + packing slips. Thanks!

Hi! See if you can't find what you're looking for HERE. Tom

Good Powerbook G4 Adapter Replacement

The ol' G4 isn't the only Mac in the house, but I still love it for what I use it for.
Unfortunately, the adapter (pre-magsafe) no longer works. Have tried the Macally, but it doesn't seem to seat correctly sometimes, there's no glowing to indicate status, and I only know it's not seated properly if I keep my eye on the battery indicator on top of the screen.
Does anyone have any good recommendations?
Thanks!

OWC has a a charger with a 3 year warranty here. While we havent used that charger, the other OWC branded products we've gotten have worked well.

The good old packages and beans problem

I have a JSP which uses a JavaBean whos class file is in the same directory as the JSP. Assuming the bean is called HelloBean, what should I do?
lets say this is HelloBean.java
package xxx; //what should xxx be?
public class HelloBean implements java.io.Serializeable {
public String sayIt () {
return "hello";
}and for the jsp,
<jsp:useBean id="hello" scope="session" class= />
what should the class be to fit in with the above code?

first, you should not put the bean in the same directory as the JSP.
I use two source trees.
/src/...
/web/...
The src contains java sources and is compiled to /WEB-INF/classes, the second contains anything associated with HTML and JSP (images, etc) and is COPIED to the root of the webapp directory structure. I do this using ANT. Furthermore I have a etc (for web.xml) and a lib (for jars). ANT makes sure every goes where it needs to go.
Usually I use the rule that JSPs associated with a servlet or bean are in the same path, so:
/src/com/sun/myapp/Thing.java
and
/web/com/sun/myapp/Thing1.jsp
This works fine for me.

My ipod touch with the lightning recharge cord keeps breaking. I heard these cords are not that good. Will Apple replace the cord?

My I pod touch with the "Lightning" recharge cord is broken and can't charge the Ipod. Will Apple replace the cord? The Ipod is less than 1 year old.

If not abused Apple will exchange it at no cost.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

My old , good brush has been replaced by a useless "smart" brush

My brush with my signatures has been replaced with a "smart brush" that is totally useless for my needs. I want my old brush back not this useless thing. Can anyone tell me where the old brush went and how this happened? Thanks.

Some of the tools have multiple choices. If you right-click on an icon a pop-up will appear and you can chooose the tool you need.

A good DTP package to replace LibraOffice?

Similar Messages

Maybe you are looking for