A good external monitor

hello, i have the final cut suite and i heard that when doing color correction you do not want to use your computer screen. does anyone know of a good tv monitor that is good - or if i even need one and the computer screen works just fine? at my school they used the 13-in jvc's. any opinions?
thx

If you're a recent student, then I will ask you what is the value of a test (examination, paper, quiz, questionnaire...) if it is not evaluated by an impartial judge. Is it an A+ or a D-? In other words does it need to be "right"? Would you give yourself a great mark for work that is "just fine"?
CRT monitors have been abandoned because they are not big enough, lack the resolution, purity, convergence, power efficiency and environmental impact that would keep them useful. On the other hand they have a smoother gamut, better black, gamma response, and show interlacing properly. Sadly, no longer available, and grade monitors in that class used to be $45K and up.
Solid state monitoring is getting ready for prime time. When it needs to be right, there are a few monitors that will be a good substitute for an A-class grading monitor... e-Cinema, CineTal, and a few other offerings. These are fairly pricey items, because building a monitor that will reproduce the various colourspaces currently in use is a tricky business. The majors: Sony, JVC, et al., to date, have not delivered, and don't seem as though they are about to, either.
You will hear all about various "inexpensive" solutions using computer monitors that are on offer with some sort of LUT, or pre-processing interface. For the most part, there is no way to fake the contrast ratio and response time that a true grading monitor offers.
You may be aware that in the "old days" there were serious arguments about the type of phosphor that was approved for CRT grade monitors... the same arguments now abound with regard to the various solid state displays that are being sold.
Colour "correction" requires more than a TV set that only shows that 'something happened'. If it is not calibrated to a known reference, all you're doing is damage. Sorry if that sounds negative, but you'll find out soon enough that it is the paying customers who have refined this notion.
Balance the cost of your monitoring choice vs. your ability to continue doing business and your professional reputation.
Think carefully about waveform monitoring, as well.
JPO

Similar Messages

Good external monitor recommendations for T61?

I need a good external monitor for my T61, the bigger the better. I would prefer to keep the branding the same with Lenovo. Does anyone have any advice? Should I go with another manufacturer? The Apple displays are really cool. Does Lenovo make anything similar?
Thanks in advance.
MacBook Pro, with an aluminum unibody enclosure **As of September 15, 2008, our company has completely switched to Apple. Having used ThinkPad products for over 10 years, we had desperately tried to find just one reason to continue using these products, to no avail. We are of the view that ThinkPads are no longer premium products. We wish you the best of luck with your ThinkPad! Happy computing…**

There is also a review of it at NBR and a discussion at TPF that are interesting.
Message Edited by nonny on 02-13-2008 07:57 AM
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Jane
2015 X1 Carbon, ThinkPad Slate, T410s, X301, X200 Tablet, T60p, HP TouchPad, iPad Air 2, iPhone 5S, IdeaTab A2107A, Yoga Tablet, Yoga 3 Pro
I am not a Lenovo Employee.
I AM one of those crazy ThinkPad zealots!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!

External Monitor Recommendations

I'm looking for a good external monitor. Any recommendations for a good 17 inch LCD monitor for my iBook?

There is an adapter for hooking up to an external monitor included with your iBook, but it can only mirror the image on your iBook's screen; if you want to use dual monitors, or you want to use a higher resolution, you'll need Screen Spanning Doctor (VersionTracker.com). Although it's a freeware app, it's very good and shouldn't do any damage to your iBook (I use it, and I have no problems).
Good luck!

Using and rec on external monitor for photo editing

ON another forum someone said that the MBP has only a 6 bit output for color on it's laptop screen.
Now what about running an external monitor, 6 or 8 bit for the MBP?
I have to admit even though I use a monitor calibration for editing my pictures on the MBP I find I always get varying results. I sometimes use my old external crt a 20" mitsubishi for photo editing.
What is a good external monitor to use with the MBP for Pro photos and will I get 8 bit color?

I hate to shuffle you around but this forum area:
http://discussions.apple.com/forum.jspa?forumID=1150
The MacBook Pro Display
might be the best place to post.

Any external monitors as good as imac screen for text?

hi all.
this is my first mac. it's a new 21.5inch imac with a 2.7ghz i5 proc running OS X 10.7.3 and 12 Gigs of RAM (8 Gigs from crucial for $50, who can resist?)
i've got it hooked up to an external samsung syncmaster B2330 running in 1920x1080, which is this monitor's native resolution. works fine. it's hooked up via the dvi port on the screen via the mini-displayport to dvi adapter for the mac. i switch this monitor to the vga port when i want to use it as my pc monitor also running at 1920x1080. there is a source button on the monitor. very convenient.
the issue is that they text on this screen when coming from the mac is not as clear was when coming from the pc despite the fact that the vga port provides much less bandwidth than the dvi port the mac uses. i've read that the mac and the pc display text on screen using different methods. my pc uses an nvidia display graphics card. i believe mac use ati based hardware.
there appears to be much more interpolation when displaying text from the mac. perhaps this is a text size issue i'm not sure. either way i read a lot on this monitor and need it to be as good as possible for that purpose.
so the question is, does anyone have experience with an external monitor that is as good as the imac screen for text display. i can't use the thuderbolt display or a cinema display since they don't switch to different ports allowing my to use a single external monitor for two machines. i'm willing to spend up if there is a reason to do so. i'm on these computers a lot. i work from home with some regularity and my job is all about reading.
any help is appreciated.
best, c

I have an dell 24" lcd as 2ed monitor and text look as clear as the imacs screen
but it having a t-nfilm lcd panel vs. the imacs ips panel the colour and contast look worse
but text look as clear
and it look the same when I boot up in win7 using bootcamp

On external monitor: GOOD. after render & dvd: BAAAAD. help, please!

Hi, I edited a 60i NTSC video from a canon XL2, and it looks fine on the external monitor (TV), the FCP preview and everything. It even looks good when I export a QT mov with no compression.
But as soon as I burn it on iDVD and play it on a DVD player, the whole interlacing business goes terribly, terribly wrong.
I've tried all possible exporting settings, but it doesn't work. Should I de-interlace the clips? I've gathered from reading the forums that it might help, but it sounds like a desperate solution, since the text should be interlaced but not the video?
I mean... what did I do wrong? Isn't ot supposed to just work straight-through with the NTSC DV Easy Setup and changing only to "None" on the compressing settings at export?
Any help, please? Anybody?

oh, OK.
For exporting, I used the Export>Quicktime movie, just like you said, using the current setting (i.e. Compression:None)
The DVD player was connected to a PAL TV, but it's OK because the DVD player can read anything. I know because I've watched NTSC as well as PAL dvd movies before.
The Canon XL2 the Mac is connected to, via Firewire, is NTSC, connected via RCA to the PAL TV. Which means the signal I'm watching is Black & White... (I know this sounds WEIRD)... but it's O.K. because what I'm really checking as I edit is the interlacing problem that I got when playing the DVD on the dvd player.... : the BAD problem.
How bad? Really bad. Any sudden movement, or panning of objects with vertical lines, like a painting or a building looks all wobbly and curvey and blurry and wrong, which is unnacceptable for the project I'm doing, as it is a professional work (Meaning that I'm charging money for it, despite the crazy assemble of different products and formats I'm using).
I've gotten things that look good before, but never on Final Cut Pro.. I'm new to the program, and to Mac, and this is the first video I'm exporting to a DVD on this platform.

Looking for a good FHD external monitor

What are people using for external monitors? I'm looking for a FHD (1920x1080) monitor to connect to my W520 system. I'm interested in something between 22 and 24". Suggestions.
Thanks
W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

I use a pair of Dell U2211H monitors, and would suggest anything in the Dell's UltraSharp range. My monitors are 21.5" IPS and cover close to 100% of sRGB. This monitor has display port, VGA, and DVI connections, and a built in 4 port USB 2.0 hub. The current version is the U2212HM is very similar and runs $219. It comes with a 3 year limited warranty and a 0 bright pixel warranty (Premium Panel Guarantee). I choose this panel due to warranty, price, and pixel density (I love dense panels).
If you choose to go larger, the 24" U2410 ($499) has a better gamut, and gives you a 16x10 resolution of 1920 x 1200.
If you want to stay with Lenovo, they offer the 23" IPS LT2323z ($399.99) it comes with 2 microphones and a full HD webcam. It also has 3 USB 3.0 ports and 2 USB 2.0 ports. Gamut is not specified.
When asking for help, post your question in the forum. Remember to include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help others with the same question in the future.
My TPs: Twist 2HU: i5-3317U Win 8 Pro, 4GB RAM 250GB Samsung 840 | T420 4177CTO: i5-2520M, HD+, Win 7 Pro x64, 8GB RAM, Optimus, 160GB Intel 320 SSD, Intel 6300 WiFi, BT 3.0 | T400 2764CTO: P8700, WXGA, Win 7 Ult x64, AMD 3470, 8GB RAM, 64GB Samsung SSD, BT, Intel 5300 WiFi | A20m 14.1" PIII 500 (retired). Monitors: 2x Dell U2211h IPS 100% sRGB calibrated w/ Spyder3.

New External Monitor for Logic on MacBook Pro - Suggestions

I'm in the painful process of updating my studio and now my large screen external monitor has started failing.
I know if this a pretty general question more suited to the MacBook Pro forum but I'd like some input from folks used to working with an application like Logic in a home studio environment.
I guess the issue for me is that I'm not getting any younger and my eyesight isn't what it used to be. One of the things specific to Logic and music software in general is that there are LOTS of very detailed dialog boxes with text that is not always height adjustable (yes I know about zooming and indeed I do lots of that but it gets quite distracting). The other factor is that I'm often recording and engineering myself which means I'll be sitting with a guitar in my lap or at a keyboard and can't always lean in too close to the monitor.
I solved this by buying a large 26" Acer which sits on my desk behind the Mackie MCU. To my left I've got the MacBook 15.4" Pro on a keyboard stand above my MIDI controller at a 45 degree angle to the desk.
It's worked quite well until the Acer seems to have become haunted. It will mysteriously reboot itself intermittently, going blank for a second, then showing the Acer logo and going back to picture. It will also turn itself on spontaneously when the computer is off (the status light is off and then turns itself on). It seems to detect when I'm in the middle of a really good session and starts resetting itself every 30 seconds or so. Then it will work fine sometimes for days or weeks at a time. I've checked it on 4 different computers, it malfunctions on all. I believe in may be a problem with one of the capacitors or the inverter, I'm not sure, but it's driving CRAZY at this point.
And of course now it's 3 months out of warranty and may be more expensive to fix than buying a new one.
So my issue is what monitor to replace it with. I've considered buying an Apple monitor, since the display is lovely to look at but there are a couple things that are deal breakers.
It's expensive. Very expensive.
Oddly you have to choose between a 24" and a 30", with nothing in between. Don't want to sound like Goldilocks here, but the 24 is tooooo small and the 30 is tooooo big.
Yeah I know bigger is usually better but since they bumped the native resolution of the 30" up to 2560x1600 it's really sharp but things like the menu text get really quite small. Yes you can reset to a lower non native resolution, but then you loose the sharpness. I tested Logic in the store on the 30" and it did look great but I found I actually had to move my whole body around to see things at the top and bottom of the screen.
Oh and did I mention that it's expensive? Jeez.
The 24" now seems to look a bit small to me after using the same resolution (1920x1200) on the Acer's 26" screen. (Ok, I think it's actually 25.5 but hey that half an inch can make a big difference and I will avoid making any bad jokes here).
And did I mention the Apple monitors are expensive? The 24" is almost 3 times as expensive as a cheaper alternative.
I also still have a PC here that I use (sorry) and the Apple monitors have very limited connectivity. So I think unfortunately the Apple monitors are out for me.
So I;m down to a couple other non Apple options. I will not buy an Acer again since I believe now that their quality control is not good and their support is absolutely atrocious. Shame I used to be a big fan of Acer PC's, but after owning a couple I'm steering clear.
My biggest issue right now is that most of the new budget monitors are geared toward 1080p HD uses so they are they are maxing out at 1920x1080 (16:9 aspect ratio instead of 1920x1200's 16:10). So the tradeoff here is that HD movies will look better in 16:9, but 16:10 gives you "squarer" pixels and more vertical resolution for screen hungry apps like Logic.
Any opinions on this? I'm a bit new to the Mac so I don't know if I'm really better off going with a 1920x1200 screen like the Apple monitors.
Also, I know this may just be a bug in the Acer's scaling, but if I switch to 1920x1080, I lose the menus off the top of the screen or if I adjust the vpos I lose the dock at the bottom. Downscaling to 1600x1050 or even 1024x768 works fine. If I get a 1080 screen and set the resolution appropriately will it work correctly and without too much distortion?
I'm also curious what is the best way to hook up the monitor? I'm currently using the DVI to VGA adapter that came with the MacBook. My Pro is the slighter older silver keyboard model so it has the standard DVI out. Will I see any real improvement by going over to using DVI directly?
Also I'm wondering how people feel about glossy vs matte for music. My current displays are the non-glossy and I do think I prefer them for detail work.
The candidates right now are
Hanns-G HH-281HPB 28" @300$. It's one of the only budget monitors that uses 1920x1200. All the right inputs (DVI, VGA). I'm just afraid this might be a bit too good to be true. It's really cheap and after having problems with a "cheap" Acer (although it wasn't so cheap 3 years ago!) I don't want similar problems. Stand has no swivel or tilt (a big problem for my use). Also that resolution on such a big screen might be good for me or it might look grainy I don't know I haven't seen it. Anybody have any experience with these?
Samsung P2770H 27" @339 Looks nice, good color. Sadly only 1080 native resolution. Stand doesn't swivel, but does tilt. No VGA input, so won't work with my old PC (although strangely it says it comes with a VGA cable). They get generally good reviews and I know Samsung makes very good flat panel TV's.
ViewSonic X Series VX2739WM 27" @350. Once again maxes out at 1080. It's fast (1ms), has VGA input. I've never been a big fan of ViewSonic but they do seem to have gotten better color-wise. Tilt no swivel and it's anti-glare (not sure this is a plus).
There are also similar options from HP, Asus, LG and Sceptre but they are all 1080. In fact outside of the Apples, the Hanns-G and a few expensive monitors from NEC they all seem to be 1080. So if I really want the 1200 the Hanns-G seems like the only way to go.
Any input here would be greatly appreciated.

No doubt, the Apple displays are gorgeous. The first time I saw the 30" display wow, I wanted one BAD and it's actually what prompted me to buy a "big" monitor. The colors are great with a rich wonderful saturation level and as usual for Apple the form factor design is stunning. You know for that picture quality I could even get over the sticker shock and save up for one.
Which is why I was so disappointed when I actually sat down in the store and started to use Logic on one. I imagine for doing video work, graphic design or darn near anything else, it would be great. But for Logic I just found myself bending and twisting trying to look at toolbar at the bottom and then up to look at the menus. And instrument or plugin displays that were hard coded to look OK at lower resolutions looked really, really tiny to me. For me and particularly using Logic having 2 slightly smaller displays at a 45 degree angle makes more sense.
And once again the 24 seems just a bit small. I don't understand why they have a 27" iMac but you can't buy a 27" display. So iMac 27" starting at 1699, subtract out the cost of the CPU and drive ie the Mini and I'd really buy one. Strangely you can buy a 21.5" or a 27" iMac. Or you can buy a 24" or 30" display. Hmmmm.
So don't get me wrong I'm not bashing Apple for being expensive. They put a lot of money into R&D and into really thinking about the form and the function of their products. As a recent convert from being a PC developer for 25+ years, hey I've more than sipped the Kool-Aid here, I've guzzled it. They make great products and yeah they're more expensive, because they ARE better! I've now got 2 MBP's, 2 iPods, I'm about to get an iPhone (silly "death grip" or not) and I really want an iPad. Heck I'd really love an 8 core MacPro if I could afford one (alas I can't).
I guess my only gripe here is that there always seems to be a little less choice in the Apple world. Yeah, I know they do a lot less volume than the PC clone world I just think that they always seem to have a big gap between the high end and low end with not enough in between. So you can choose between the lower end and one piece units with no expansion boards (the mini or the iMac) or go straight to monster tower MacPro (way over 3K with display). You can get a MacBook but then you have to put up with a small screen or go with MacBook Pro, which let's face it is a lot of computing power for someone who just wants to web surf and write some email without squinting.
So here I am stuck in the middle. I don't want to buy a HannspreeQG or another piece of junk that's going to last 3 years and 3 months because of a crappy $2 capacitor that no seems to able to fix or care about fixing. I'd like to buy a really nice Apple monitor, I just want a big monitor, not a huge one and not a "medium" one (I know I'm spoiled but 24" seems "medium" these days).
Sorry about the rant here but my monitor is shutting down every 30 seconds and I'm about to go completely insane and toss it out the window!!!
Really glad to hear about that 84' VGA cable. I never imagined such a thing existed or would work without some sort of signal boost on the way. Very cool for me. My electronic drum kit is in another room and I would love to have a small cheap monitor next to it for sequencing. I had my laptop on a stand next to it for a while but I began to get terrified that I'd let a drumstick slip and destroy my laptop screen. That would be a very bad thing. Thanks for the tip.

How to blank laptop screen when using external monitor/

Hi there
I need some help with figuring out how to configure my xorg.conf for my Arch Linux 64 bit installation on a HP Pavilion dv 5000 laptop so that I can automatically blank my laptop screen when using an external monitor. I have Arch Linux installed along with Ubuntu Feisty. In Ubuntu my external monitor (Viewsonic 1912WB) was not detected at the time of installation but with the native 1280X800 resolution that is good for the laptop takes effect for the external monitor automatically when the external monitor is plugged in. The laptop monitor goes blank when the external monitor is plugged in.
In my Arch Linux installation I have not been able to configure a dual head configuration using the ATI Radeon drivers (fglrx). I have the native 1280X800 resolution set up for the laptop monitor and this resolution takes effect for the external monitor also. However the laptop monitor also continues to function when the external monitor is plugged in. I would like to blank the laptop monitor when using the external monitor.
I am attaching my Arch Linux xorg.conf and the Ubuntu xorg.conf below. Thanks for anyone who can help, I am having a lot of difficulty in figuring out how to set up xorg.conf among all the things that I have had to learn so far in Linux and I am a relative newcomer to the whole thing. I have tried to compare the two xorg.conf files and edit my Arch xorg.conf in accordance with the Ubuntu one but it did not work and I keep getting errors!
I am using XFCE as my Desktop environment.
Arch Linux xorg.conf
# File generated by xorgconfig.
# Copyright 2004 The X.Org Foundation
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# The X.Org Foundation BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
# Except as contained in this notice, the name of The X.Org Foundation shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from
# The X.Org Foundation.
# Refer to the xorg.conf(5) man page for details about the format of
# this file.
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# Files section. This allows default font and rgb paths to be set
# Server flags section.
# Input devices
# Core keyboard's InputDevice section
# Core Pointer's InputDevice section
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the xorg.conf man page for a description of the options.
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
# Monitor section
# Any number of monitor sections may be present
# Graphics device section
# Any number of graphics device sections may be present
# Standard VGA Device:
# Device configured by xorgconfig:
# Screen sections
# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
# ServerLayout sections.
# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.
# Section "DRI"
# Mode 0666
# EndSection
Section "ServerLayout"
# The Identifier line must be present
# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen. In this example, screen 2 is located to the
# right of screen 1.
# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".
Identifier "Simple Layout"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"
EndSection
Section "Files"
# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# RgbPath "/usr/share/X11/rgb"
# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
# FontPath "/usr/share/fonts/TTF"
# FontPath "/usr/share/fonts/Type1"
# FontPath "/usr/lib/X11/fonts/local/"
# FontPath "/usr/lib/X11/fonts/misc/"
# FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
# FontPath "/usr/lib/X11/fonts/Speedo/"
# FontPath "/usr/lib/X11/fonts/Type1/"
# FontPath "/usr/lib/X11/fonts/TrueType/"
# FontPath "/usr/lib/X11/fonts/freefont/"
# FontPath "/usr/lib/X11/fonts/75dpi/"
# FontPath "/usr/lib/X11/fonts/100dpi/"
# The module search path. The default path is shown here.
# ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
EndSection
Section "Module"
# This loads the DBE extension module.
# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
# This loads the font modules
# Load "type1"
# This loads the GLX module
# Load "glx"
# This loads the DRI module
# Load "dri"
Load "dbe" # Double buffer extension
SubSection "extmod"
Option    "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection
Load "freetype"
# Load "xtt"
EndSection
Section "InputDevice"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.
# Option "Protocol" "Xqueue"
# Option "Xleds" "1 2 3"
# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc105"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# These are the default XKB settings for Xorg
# Option "XkbRules" "xorg"
# Option "XkbModel" "pc105"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""
# Option "XkbDisable"
Identifier "Keyboard1"
Driver "kbd"
Option    "AutoRepeat" "500 30"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
Option    "XkbRules" "xorg"
Option    "XkbModel" "pc104"
Option    "XkbLayout" "us"
EndSection
Section "InputDevice"
# Identifier and driver
# the following line.
# Option "Protocol" "Xqueue"
# Mouse-speed setting for PS/2 mouse.
# Option "Resolution" "256"
# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.
# Option "BaudRate" "9600"
# Option "SampleRate" "150"
# Mouse wheel mapping. Default is to map vertical wheel to buttons 4 & 5,
# horizontal wheel to buttons 6 & 7. Change if your mouse has more than
# 3 buttons and you need to map the wheel to different button ids to avoid
# conflicts.
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)
# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"
# ChordMiddle is an option for some 3-button Logitech mice
# Option "ChordMiddle"
Identifier "Mouse1"
Driver "mouse"
Option    "Protocol" "Auto" # Auto detect
Option    "Device" "/dev/input/mice"
# When using XQUEUE, comment out the above two lines, and uncomment
Option    "ZAxisMapping" "4 5 6 7"
# Emulate3Buttons is an option for 2-button mice
EndSection
Section "Monitor"
# HorizSync is in kHz unless units are specified.
# HorizSync may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
# HorizSync 30-64 # multisync
# HorizSync 31.5, 35.2 # multiple fixed sync frequencies
# HorizSync 15-25, 30-50 # multiple ranges of sync frequencies
# VertRefresh is in Hz unless units are specified.
# VertRefresh may be a comma separated list of discrete values, or a
# comma separated list of ranges of values.
# NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR'S
# USER MANUAL FOR THE CORRECT NUMBERS.
Identifier "My Monitor"
HorizSync 30.0 - 62.0
VertRefresh 50.0 - 70.0
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option    "VendorName" "ATI Proprietary Driver"
Option    "ModelName" "Generic Autodetecting Monitor"
Option    "DPMS" "true"
EndSection
Section "Device"
# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.
# Chipset "generic"
# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# intalled.
# BusID "PCI:0:10:0"
# VideoRam 256
# Clocks 25.2 28.3
Identifier "Standard VGA"
Driver "vga"
VendorName "Unknown"
BoardName "Unknown"
EndSection
Section "Device"
#VideoRam 131072
# Insert Clocks lines here if appropriate
Identifier "* Generic VESA compatible"
Driver "vesa"
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Screen 1"
Device "* Generic VESA compatible"
Monitor "My Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1280x800" "800x600" "640x480"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Ubuntu xorg.conf
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/input/wacom"
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/input/wacom"
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/input/wacom"
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Driver "ati"
BusID "PCI:1:5:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "ATI Technologies Inc ATI Radeon XPRESS 200M 5955 (PCIE)"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x800"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x800"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection

Xrandr 1.2 provides means for this. But today the only supported configuration is xorg-server-1.3 + xf86-video-intel-2.0. So for Radeon you'll have to wait for drivers that support Randr 1.2.
On my laptop (Thinkpad x60s) that would be:
xrandr --output VGA --auto
xrandr --output LVDS --off

I've got a MacBook pro 15' running 10.6.6. I want to use an external monitor for my graphic design work running Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing.

I've got a MacBook Pro 15' running 10.6.6. I want to use an external monitor for my graphic design work using Adobe software and thought I'd try an HD TV. I ran a Mini Display to HDMI lead to the TV but the picture quality was disappointing. I also tried a Mini Display to VGA lead and that wasn't much better. I tried all variations of resolutions in System prefs - Displays but nothing helped. Am I getting something wrong? Thanks all.

In addition to pixel density, you are up against the translation driver card in the TV.
If you read the fine print of computer-resolution-capability in the TV user guide, you will see a chart as tall as the manual page. At the top is the smallest resolution capable, at the bottom is the full use of the 1080p in the TV.
Mac falls into the top 25% of the page, maxing out at 1366x768 often. This is because the TV control card is expected to do too much of the work, but is not designed for computer-monitor processing.
I looked at the resolution charts on 2 TVs before deciding to buy a 1080p LCD monitor that has a TV interface/connector. Computer monitor first, TV second. But the thing is only 27 in. Good thing TV is not as important to me as it is to others.

After Logic Board replacement Built in Display not working but External Monitor is

Had to replace logic board in my Mid 2009 17' MBP as it wasn't powering up at all.
Since putting in refurbished logic board MBP powers up and actually works perfectly with an external monitor but built in display is dead.
In 'About My Mac' initially it showed Color LCD as being connected., but now it doent.
Can anyone tell me if this is a problem of the refurbushed logic bioard from this ionfo - or if there is a w ay of being 100% sure that it is the logic board and not the display.
Best
Tommy Banana

Shine a bright light at the screen and see if the picture is there, but the backlight is not there.
Working inside MacBook is very fussy work, and it is far too easy to make connections that seem fine, but do not quite work, or to disturb earlier work during re-assembly. Just to vex you even more, the screen connections go through the hinge area, and are subject to constant movement and stress.
I tend to first blame the last thing you changed (working inside your Mac in this case) as the source of the problem over random failure, until I can use classic techniques (such as substituting know-good parts) to rule random failures in or out.
If you did not follow proper grounding and static-elimination techniques, you can cause major damage inside. Tiny shocks can ruin electronics long before you feel the spark.

Using a Vizio HDTV as an external monitor

I've bought the right connector and cable to connect my MacBook to an external monitor, and with two of our HDTVs, it works great. The problem is, it doesn't work with the TV I want it to.
We have a Vizio 27", a Phillips 47", and a Sony Bravia 52". On the Phillips and Sony, the picture quality is 1080p and amazing quality, and everything fits on the screen perfectly (as in the menu bar and dock).
But with the Vizio, which I'm wanting to use as a main monitor with external mouse and keyboard also, the picture quality is awful. It looks decent at 1280x764, which it tries setting it to by default, but when I change that to 1080i, the picture quality becomes really fuzzy and unreadable, and the dock and menu bar aren't even on the screen (you can barely see the top of the dock at the bottom though, so I know it's there.)
My question is: Does anyone know a way to fix this? So the Vizio can show the image in good quality? I've searched all through the MacBook's settings and my TVs settings, but I couldn't find anything. Any ideas?

I have a Samsung HDTV with HDMI Sockets etc etc
What cable will I need to connect my MacBook to my HDTV to watch movies direct from my MacBook on my HDTV?

HDTV as external monitor using ethernet connection

Hello,
I want to connect my HDTV to my iMac and use it as an external monitor.
My HDTV is about 25 ft away from my iMac.
A HDMI cable of that length cost over 200 $.
So, its not an option to me.
I just bought a smart rooter but my HDTV Panasonic Viera P50GT30 is not a smart TV.
It needs a DLNA server and I can't find one.
Question : Is there a way to use my HDTV as an external monitor using the Ethernet or Wifi connection?
Thank's,
Pierre.

This look's good.
http://www.startech.com/AV/Extenders/HDMI/HDMI-over-IP-Extender-with-Audio~IPUSB 2HD2
But its not.
OS Compatibility Windows® XP(32bit)/ Vista(32/64bit)/ 7(32/64bit) Aero themes supported

What is the best method to connect Gateway FPD2185W External Monitor

Hello,
I just bought a new Macbook. I would like to connect it to my larger Gateway FPD2185W external monitor. The monitor is maybe three years old, and has VGA, component, S-Video, and DVI inputs. Which type of connection would work best? I have a mini-DVI to VGA connector from Apple, but the display doesn't look the greatest. I'm still new to using the MacBook, so help would be appreciated.
Thanks!

There are some settings on the monitor that might be affecting how it looks when running from VGA. There should be a "tuning" function, also known as clock phase adjustment. There is an AUTO button located on the side of the monitor. Press it and see if it helps the picture quality. Also under the Video Adjust menu are settings for Sharpness and Noise Reduction. Those settings can often interfere with good picture quality, so you might try playing with them as well.
Of course, you could always switch to the DVI input for the best image quality, but that would require buying another adapter from Apple and also a DVI cable if the monitor didn't already come with one.

MBP Thunderbolt 2, connect 3 external monitors via 1 only port ?

Hi Apple Communities,
My "old" mybookpro late 2009 died 3 days ago (motherboard).
So I buy a new MBP Retina 15" Late 2013.
I would like to plug 3 external monitors for more confort to work (one for Virtual Machine and 2 for OS X mainly)
(but not Apple Thunderbolt Display, nice but too expensive for my budget).
My question : Thunderbolt 2 and DisplayPort 1.2 are the same right ?
If yes, this interface should allow to connect peripherals by "daisy chain".
Because the lack of connectivity of the macbookpro, I would like to check if it's possible to use 1 Thunderbolt 2 port to plug one monitor and use the first external monitor to the 2 others. For example with this display Dell UltraSharp U2413 with the DisplayPort 1.2.
I want to keep the other Thunderbolt2 port to plug my external drive (with the firewire adapter) or plug my NAS in Ethernet.
I'm not a gamer but I work on Video Editing, Webdesign, Code so I need good performance too (3 x 1920x1080/1200px will be fine, if I can have better resolutions, it's ok ! )
Thanks for your help !

You can either use a FireWire hub or connect one device through USB. If either drive has two or more FireWire ports, it can act as a hub.
(121173)

A good external monitor

Similar Messages

Maybe you are looking for