A graphic style I created isn't transforming properly.

A graphic style I created isn't transforming properly. When I select the object that has the style applied and then try to transform it, it distorts even if I lock the width and height dimensions. Anyone know what I'm doing wrong?

Hi,
This seems to be related to "Align to Pixel Grid" option. You need to make sure while creating a new object that this option is unchecked.
Regards,
Saurabh

Similar Messages

Do not duplicate the graphic style when you copy and paste a feature

I rely heavily on the use of graphic styles. However, when I copy and paste a feature that has a graphic style assigned to it, a duplicate of the graphic style is created. I sometimes end up with a large number of these duplicate graphic styles that I have to trash. This does not happen with the selection tool+alt shortcut for copying. However, I can't use this shortcut when I want to paste in front or paste in back, which is the case at least half the time.

Only advice I can offer is Option Left cursor, then right cursor, to make an exact copy in same position.
This will give you a clone as the action does form the previosu poster, but unfortunately no oslution for when you want to target layers.
If anyone else has any input on this here is how to reproduc:
New document, create a graphic style (eg: fill yellow, stroke none) and save
Close the document
Open the document
copy and paste the element with the graphic style, and with every paste multiplies faster than a tribble on Star Trek
I played with changing the clipboard options, no luck. Exists on CS4 Mac, CS5 Mac & PC, might go back as far as graphic styles do.

Why is my graphic style taking so long to load?

The graphic style in question contains, a Transform, Add, and Multiply Opacity. I have a high quality graphic card, so I know that's not the problem. On shapes it works really fast, but when I use it on type no matter if its in the text area or if the type is expanded the loading times are still extremely slow. Any help would be appreciated.
John

We know nothing. you have not provided any exact technical details about your system nor the document. We don't even know your AI version. Unless you use AI CC 2014, hardware-acceleration in AI is irrelevant since it doesn't exist in older versions, so I'm not sure what your comment about graphics card is supposed to make us think...
Mylenium

Problem trying to create graphic style...

I'm trying to create a nave menu and in doing so, create a single graphic style that can achieve my end goal. I can get what I want by using a seperate shape, but that defeats the purpose of the single graphic style. I thought I could achieve the look using an effect under
Effect>Pathfinder
But that doesn't get the result I expected. Below you can see both what the graphic style currently looks like, and what I want to add to it (the gloss) hopefully within the same graphic style. Is this possible?

Try this:
https://dl.dropboxusercontent.com/u/3910250/button.ai

Copying a path creates a duplicate graphic style

When copying a path by using the the menu commands, if there is any graphic style associated with that path, a duplicate graphic style will be made. We deal with copying hundreds of lines. As a result, we are left with hundreds of graphics styles that are duplicates. This slows the program down by a significant amount. Is there any fix to this? We do use the ALT shortcut when we can, which does not create duplicate graphic styles. But, there are some instances where this cannot be used.

I'm going to take a guess here - if you create a brand new document and do not paste anything into it, but create a path, apply a Graphic Style, then copy and paste that path, you do not see this problem right?
If that is correct, then my guess is that you frequently work with files where some of the content was created in a much older version of Illustrator and you should refer to this knowledge base article to see if it can help: http://kb2.adobe.com/cps/408/kb408008.html

Graphic Styles - issue with creates style expanding to background when used

I have created a background style to use as a wire frame, and having created it, every time I use it the frame expands to the back ground size?

Thank you Peter and Amebr for your assistance. I ended up using RH Multilevel List Style, configured, and created an identical List Style in Word. I created a Single and a Multilevel (e.g., Level = bullet, Level 2 = squares); their challenge is matching RH indents with Word Indents... It's sort of a bear since RH does not have the Format Paragraph option (ref. drop-down) like Word Lists - Numbering functionality.
After generating my print document mu Bullet style reads "Normal (Web)"; even though the RH CSS Wizard recognized Word List Style I created (Ref. Font: Symbol, Font color: Black, Indent: Left: 0.15", Hanging: 0.25", Outline numbered + Level: 1 +, Numbering Style: Bullet + Aligned at: 0.15" + Indent at: 0.4", Priority: 100, Based on: No List.
Question: Would anyone out there know why is when I highlight my bullet list to verify the correct Style (with the Styles pane open) and I see the "Normal (Web)" [its Style type = Paragraph and Style based on = Normal) is selected? If it came through (from Rh) as a true Multilevel List Style, I should not see anything.
Happy Holidays!
~PM

Graphic styles + pattern creator

I just finished a series of characters, all heavily styled using handmade textures which I applied via Illustrator's graphic styles. The goal was to create pattern motifs using the characters, but Illustrator won't allow patterns to be created using artwork that's already filled with other patterns. I initially thought I could expand the fills, but that isn't working either. Am I missing something?

You need to expand them and after that also get rid of clipping masks.
That's a lot trickier. If there are no strokes inside the patterns, you can try the pathfinder Crop

Problem updating graphic styles specs, after scaling illustrator image

Hello there,
I'm designing a map in Illy and have created graphic styles for the various route keys I use.
After recording the styles, I've enlarged the map, so the specs for all the styles has changed to a greater value (stroke width etc.)
I've tried to update the graphic styles by selecting the enlarged stroke and saving it as a new style.
But when I try to apply it, the style button still applies the original stroke width, from before I enlarged the image.
The graphic styles window won't forget the old styles!
How do I get round this? Thanks for your help.
Kind regards,
Gill

If you scale strokes which are based on graphic styles, the original parameters of the styles are not changed. What actually happens is a kind of internal transformation which is indicated at the bottom of the Appearance Palette as a scaling percentage.
To do what you want, just select one of the scaled strokes, release it from the style definition and then redefine the style based on that stroke.

3-color "double" line...graphic styles?

I'd like to create a "double" line that uses 3 colors. The third color would be the gutter space in between, either white, or clear. The lines on the outside would have different colors, and/or different dotted or solid patterns.
Example:
Red 1pt
White 1pt
Green 1pt
How would I create a Graphic Style of this type?

535678,
For a simple double line, you may use an Art Brush, for more complicated versions such as one full and one dashed, you may use a Pattern Brush.
You may:
1) Create a rectangle with a height corresponding to the first line thickness and an arbitrary length, or corresponding to one dash and one gap, and give it the first colour, no stroke;
2) Move a copy straight down (or up) by the distance in between plus the first line thickness, and change the height if needed (setting the upper left Reference Point in the Transform palette/panel), and change the colour.
Now you can define it as an Art Brush, or if you want the second line dotted:
3) For the line to be dashed, reduce its length to the dash.
Now you can define it as a Pattern Brush.

Compound paths & graphic style problem (map related)

Hi all,
Been banging my head against a wal with this all morning. I'm hoping one of you can help.
I need to replace portions of a map - it' slots and lots of shapes representing buildings.The original file has shapes made of compound paths (see illustration below). That's great, because the center needs to be knocked out (there are some items underneath that occasionally show through). I thought I'd try to create a graphic style to replicate the look as closelty as possible, but I cannot get a fill to act as a knockout - so I have the basic shape and effect that I want, but with a colored center instead of a knocked-out one. This is a problem becuase I'll be changing dozens of shapes and I don't want to have to recreate the look on each shape manually.
Here's a pic to help clarify. The original is on the left, my attempted recreation is on the right. Help!

First, thansk so much for the help! I'm soooo close, but I keep doing something wrong. Let me run through my steps to see if you can spot where I'm falling down:
Draw my rotated box (I Object> Compound Path > Make converted it to a compound path becuase I assuemd I'd need that when applying a knockout. I may be wrong there).:
Fill with white, copy the fill and fill with brown:
Apply a Transform effect to the 2nd fill (I need the numbers to be absolute, not scale, becuase I need to apply thsi to a variety of shapes but achieve a uniform look):
I then go to the Opacity on that second layer and check Knockout:
But when I drop the Opacity down to 0% (with knockout checked) that entire fill layer just goes transparent:
And if I apply the Knowckout - Opacity settings to the main opacity at teh bottom, the whole thing goes blank:
Incidentally, here's the shape I'm trying to replicate (I know my attempt doesn't reproduce the connected lower left and upper right rounded corners):
And here's a small chunk of the map. I'll be changing dozens of these shapes and want to apply that consistent look to them without doing each one manually.
G'ah! It's driving me nuts! What am I doing wrong?

Can't locate custom Graphic Styles

I created and saved some custom Graphic Styles in Illustrator CS4. When I follow the path of the default save location (Apps>Illustrator>Presets>en_US>Graphic Styles) they are not there. I have used Spotlight to search my machine for the files, but it returns no results.
I have created a new, custom location for saving Graphic Styles in the future, but I want to locate these "missing" files so that I can delete them.
Anyone know how to locate these files?
Can I locate and remove them from within Illustrator?
I am using Illustrator CS4 for Mac.
Thanks.

Thanks for the reply Mylenium.
I still don't see them.
User>Library>Preferences>Adobe>...nothing about Illustrator (Encore, Encoder, AE, Contribute, EXT Mgr, MediaCore ImporterProcess, OnLocation, Plugins, PProHeadlines, PPro, SB, XMP). I checked each of these folders and their subfolders with no luck.
User>Library>Preferences>Adobe Illustrator CS4 Library Settings>en_US>Flash 10 and FWAIPref>...empty.
User>Library>Preferences>Adobe Illustrator CS4 Settings>en_US>...no folders and no Graphic Styles.
Weird.

Copy/Paste duplicates graphic styles

Scenario: Start with a named graphic style of say 2 pt black stroke/no fill called '2.0 pt'. Create an object using said style, copy and paste it, every time I do this I get '2.0 pt 1', '2.0 pt 2', '2.0 pt 3' etc. insanely populating my graphic styles panel. Anybody else experience this behaviour or is it just my set up and something I have to troubleshoot?
This is with CS6 (16.0.4) running on Mac OS X.6.8
Any help, much appreciated
Les

Yeah, sorry about that, tried to edit my post to reflect that I was in the wrong forum but the forum software said I didn't have permission to edit my own post! weird. And yes I'm talking about Illustrator.
Les

Adding Graphic Styles using VBA

Hi all
How would I go about applying graphic styles to a path using VBA? I would imagine the following line is wrong because it doesn't work.Any help would be appreciated.
idoc.GraphicStyles("02-S").ApplyTo (isquare2)

You're right, it is no fun to have someone give you all the answers. Trial and error is how I learn the most, well it least to make it stick. Believe me, I go online and try out different things before posting anything on here. Along the way, I might not find the answer I'm looking for, but I always find something out, and most of the time, it's something I needed a while back.
Yep, I've seen that error quite a few times on numerous projects, it means that the object isn't affected by the methods or properties I'm trying to affect it with.
However, I was able to make it work by removing the () from the object variable isquare2.
idoc.GraphicStyles("02-S").ApplyTo isquare2
Thanks for the challenge Carlos!

Importing Graphic Styles

What is the best way to import graphic styles from another document (Win XP, JS)?
I know there are Document methods for importing CharacterStyles and ParagraphStyles... but why not graphic styles?

no direct way that I know of, but it is possible, I would
- create a temporary pathItem
- apply the desired Graphic Style
- copy the temp pathItem and paste in into the destination document
- delete the temp item from both source and destination documents
- loop thru all graphic styles if I needed all graphic styles imported

Managing graphic styles through external styles?

is there a way to consolidate graphic styles across multiple files? I have enough files across which I need to match colours and styles that it would be really nice to have something like an external css - a central place from which i could control the styles, which would be inherited by their instantiation...
anything?

Graphic Styles can be saved externally, but not linked. One simple alternative would be to create a new startup document or Document profile replacing the default styles with your custom styles. Of course this would only impact new documents.
For details on finding where either the startup or document profiles reside check out Claudia McCue's blog post - http://www.claudiamccue.com/2008/12/setting-illustrator-defaults/
Also, submit this as a feature request, your not alone in wishing this could be a feature shared amongst a group of Illustrator users - https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Tom

A graphic style I created isn't transforming properly.

Similar Messages

Maybe you are looking for