A great accessory that does not exist?

This seems so obvious, and so logical that my ignorant butt must be missing something.
I've been looking at wireless options and general options for connecting my 5G iPod with my home stereo, car stereo etc. Reading all this about running wireless, having a remote control and whatnot and I'm wondering why does something that is already so small and portable need a remote? This seems backasswards. It IS a potential remote that gives you total control over the iPod.
Why isn't there a wireless system like this:
A small wireless transmitter that plugs into the iPod dock connector (like the iTrip does), which would transmit to another small unit with a wireless receiver that can sit on top of your home stereo. This receiver would then have a 4-ft. A/V cable to run into your stereo. This would be killer.
I haven't found one of these anywhere - has to be a reason. I've read that the FM transmitters don't give you very good sound compared to a direct connection from the dock to the stereo, but that the wireless systems do. Is this not true?
Please help me understand.

Yeah, I guess that wasn't very clear. I haven't found the wireless system I described, wherein the iPod itself does the transmitting, eliminating the need for a remote.
The existing systems I mentioned were 1) the FM ones that go through a radio, and 2) the ones that transmit from a computer TO the iPod (the iPod then is hard connected to the home stereo inputs.
I've read that the FM transmitters don't give you
very good sound compared to a direct connection from
the dock to the stereo, but that the wireless systems
do
You have not found a wireless system for the iPod yet
whatever you were reading says a wirtless system is
better.
What wireless system were they talking about?
RATOC REX-Link1P - iPod Wireless Audio
Adapter
I did see something like this the other day though I
can't remember where it was.

Similar Messages

Creating a page that does not exist

Hi everyone,
Is it possible to create a page that does not exist based on the user input?
By does not exist I mean that it is not stored in your computer and JSP will generate the page based on the user input. For example, in forums the user can create a new topic and based on the options selected a page will be created and stored that was not present before. The same thing happens when a message has a large number of replies, in which a new page will be created and attached to the previous page. I hope that I am not misunderstanding the concept of creating pages in forums.
Any help is greatly appreciated.
Regards,
Basil Mahdi

Hi,
what happens in the forums is that you type in a message and that message is stored in a database. Along with your message the number of thread, forum number and message number is stored. Next time somebody wants to read your message, this message is taken from the db and shown to you by the jsp. The JSP ofcourse does more thant taht it shows also other messages and static HTML.
http://galileo.spaceports.com/~ibidris/

The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.

I am experiencing this error with one of our cluster environment. Can anyone help me in this issue.
The Cluster Service function call 'ClusterResourceControl' failed with error code '1008(An attempt was made to reference a token that does not exist.)' while verifying the file path. Verify that your failover cluster is configured properly.
Thanks,
Venu S.
Venugopal S ----------------------------------------------------------- Please click the Mark as Answer button if a post solves your problem!

Hi Venu S,
Based on my research, you might encounter a known issue, please try the hotfix in this KB:
http://support.microsoft.com/kb/928385
Meanwhile since there is less information about this issue, before further investigation, please provide us the following information:
The version of Windows Server you are using
The result of SELECT @@VERSION
The scenario when you get this error
If anything is unclear, please let me know.
Regards,
Tom Li

How can I change my Apple ID that is set up with an old email that does not exist anymore

I set up an Apple ID years ago with a hotmail email account. I also deleted that hotmail email account years ago. I now have a gmail email. I cannot back up anything to icloud because of my apple id that is connected to the hotmail email account that does not exist anymore. To change my ID, apple sends a verification email to my old hotmail account which i cannot access, and it also says my gmail account is my rescue account, so I wouldn't be able to change it to my gmail account anyway. Any ideas? I'd like my ID to be associated with my one and only current gmail email account. I have a lot of songs that I've spent a lot of money on over the years that I don't want to lose.

See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

The list of workflow actions on the server references an assembly that does not exist

Hi,
This issue has been discussed many times in this forum , the reason why I am posting is I tried the resolution steps but I dont see any luck.
I am getting the below message from the SharePoint designer 2007 when I am trying to modify a workflow
"This list of workflow actions on the server references an assembly that does not exist. Some actions will not be available. The assembly strong name is Microsoft.SharePoint.WorkflowActions, Version=12.0.0.0, Culture=neutral, PublicKeyToken=71e9bce111e9429c.
Contact your server administrator for more information."
#1 : One of the post says "Normally you would see that error because someone has extended the Workflow actions available in SPD with a custom action developed in Visual Studio. These custom actions are loaded when your workstation reads the WSS.ACTIONS
file on the server. The file is located in the 12 hive under Template\1033\workflow. Your WSS.Actions file contains a reference to a custom action .dll which is not available on the server."
I opened the WSS.Actions file in notepad, I dont see any line with *.dll in it. Am I missing something?
#2: Another post says "The solution I discovered was that the server running my SharePoint Services was not up to .NET 3.0. As soon as I updated to .NET 3.0 everything worked.I had made sure the machine running SharePoint Designer was updated, but
had missed the SHarePoint Services server."
The server is already updated to .Net 3.0.
#3: I went to the %System Drive%\Documents and Settings\Local Settings\ApplicationData\Microsoft\SharePointDesigner.
Deleted the ProxyAssemblyCache folder but no luck.
Just checking if any one was able to resolve this issue by following any of the solution other than the above mentioned ones.
Thanks,
Cutloo

 I have the similar issue with my custom work flow. I have searched the whole day for the solution but no success, then at last a simple track works for me. Please try this if any one faces such issue.
Basically the assembly that we have define in the ACTIONS file dose not exists on the server, because of two reasons, either we have given the wrong assembly name (in our case the namespace name inside our solution) or the PublicKeyToken may differ from the
original assembly, that are deployed in GAC.
 So cross check both of these, in my case the assembly name was fine,
<Action
 Name="Move Item to Another List and Send Email"
 ClassName="MyAssemblyName.Classname"
 Assembly="MyAssemblyName,Version=1.0.0.0, Culture=neutral, PublicKeyToken=4053d1fde8a1c781"
 AppliesTo="all"
 Category="Email actions">
But the problem was in the 'PublicKeyToken', so i double click on the feature inside my solution,then in the bottom i have clicked on the manifest tab to check the entries.
<Feature xmlns="http://schemas.microsoft.com/sharepoint/" Title="MyAssemblyName Feature1" Id="f7f1bda0-5f65-40f1-a705-f6f15a41da3a" ReceiverAssembly="MyAssemblyName, Version=1.0.0.0, Culture=neutral, PublicKeyToken=0c32dbb769ed64b5"
ReceiverClass="MyAssemblyName.Features.Feature1.Feature1EventReceiver" Scope="WebApplication"></Feature>
Here i got the actual PublicKeyToken for my assembly (0c32dbb769ed64b5), i have replaced this number inside ACTIONS file, deploy the soultion, reset IIS.
It works for me,

VENDOR is mapped to the dialog column (USAGE_VENDOR) that does not exist

Hello,
I'm trying to install Solman 4.0 Unicode. When I start sapinst and select a Central System, I get an error before it even gets to the point where I can input some parameters. The error is below, has anyone experienced this? Thank you.
~TJ
ERROR 2006-08-17 09:29:20 [iaxxctbctl.cpp:128]
 CTableControl::retrieveDefaultValue
FGE-00003 The key db column VENDOR is mapped to the dialog column (USAGE_VENDOR) that does not exist.
TRACE [iaxxejsbas.hpp:388]
 handleException<ESAPinstException>()
Converting exception into JS Exception Exception.
ERROR 2006-08-17 09:29:20
 CJSlibModule::writeError_impl()
MUT-03025 Caught ESAPinstException in Modulecall: ESAPinstException: error text undefined.
TRACE [iaxxejsbas.hpp:460]
 EJS_Base::dispatchFunctionCall()
JS Callback has thrown unknown exception. Rethrowing.
ERROR 2006-08-17 09:29:20
FCO-00011 The step selectUsages with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|5|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0|selectUsages was executed with status ERROR .
TRACE
<html><head></head><body>An error occurred while processing service SAP Solution Manager 4.0 > SAP Systems > IBM DB2 UDB for iSeries > Central System > Central System Installation. You may now<ul> <li>press Retry to repeat the current step.</li> <li>press the View Log button to get more information about the error.</li> <li>stop the task and continue with it later.</li></ul>Log files are written to G:\usr\sap/SAPinst/SOLMAN/SYSTEM/DB4/CENTRAL/AS.</body></html>
TRACE [iaxxgenimp.cpp:1093]
 showDialog()
waiting for an answer from gui
INFO 2006-08-17 09:32:31 [iaxxgenimp.cpp:779]
 showDialog()
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features|ind|ind|ind|ind|5|0|SAP_Software_Features_Select|ind|ind|ind|ind|1|0|selectUsages".

FYI - I was using the NW2004s control file patch not NW2004sSR1. Once using the correct control files it worked.
~TJ

How to redirect a page that does not exist

Hello everyone. Thanks for the feedback so far.
I am editing an old site and there are going to be some pages that do not exist anymore.
Is there a way to have an automatic redirect so that if any user types in ANY page that does not exist sitewide, they can be directed to another main redirection page which displays a message and then to the main page again?
The current site is littered with empty pages with a redirect link on each at the moment which does not look good and it's awful to maintain as these non-meaningful filenames the original developer has used are no help at all.
Thank you in advance for all feedback
Terry

What is the web address of the old site?
If it's on a Linux server then you can use .htaccess rewrites to automate much of the redirection heavy lifting
http://kb.mediatemple.net/questions/85/Using+.htaccess+rewrite+rules#gs
https://my.bluehost.com/cgi/help/htaccess_redirect

Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.

Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.

We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful"

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) it gets through.

System keeps looking for a 'server' that does not exist. Is says the old name of my Airport Extreme. Clicking it away (4x) finally gets through.

Other weirdness to report: my neighbor upstairs appears to have a Linksys router network on channel 6. My AEBS is on channel 1 so there shouldn't be interference... but according to iStumbler sometimes the signal leaps to 64000 (keep in mind my own Airport never tops 60)! Is that potentially the problem?
Might it be possible that your neighbor just acquired a 802.11n (pre-N) wireless router recently?
802.11n effectively increases capacity by doubling the number of Wi-Fi radios and increasing the number of antennas used to push signals out of those radios. 802.11n splits a data frame into multiple pieces. It then transmits these pieces in parallel using multiple radios that are attached to multiple antennas. These antennas blast out signals from virtually the same vantage point – scattering the signals everywhere.
You may find the following ZDNet article interesting: http://blogs.zdnet.com/Ou/?p=247
Even if he did not, and you are on good terms, you might want to ask if he can temporarily turn off his wireless, or, at least, reduce the signal strength to see if that will help in your situation.

IMovie searching for files for project that does not exist...

Whenever I fire up iMovie 09 on Lion, it spins, and then tells me it can't find a video file for a project that does not exist. That is, it says 'File xxx.mov from project 'Movie 1 cannot be found - without this file the movie cannot be played.' The project is one I deleted a long time ago, and does not appear in the project list. How can I force iMovie to forget about this?
Thanks!
PS the specific error is 'Searching for movie data in file "New Project 1 - Large.m4v". The only button is "Stop". so I press that, then a new dialogue box saying 'The movie file 'New Project Large.m4v" cannot be found. Without this file, the movie cannot play properly." It has cancel and search buttons. Obviously, searching doesn't help - it was deleted a long time ago. Cancelling makes it go away until iMovie is launched again.

Whitecity,
This is awesome.
So moving forward from here, you can narrow down which event is causing the behavior but systematically trial and error. Once you determined the exact event folder, there are subfolders underneath:
/iMovie Movie Cache/
/iMovie Stabilization/
/iMovie Thumbnails/
Try removing these to see if iMovie rebuilds them.
Calbe

Using ExtendedLogFormat, server log refers to Exception that does not exist

I created a custom logging class, using ExtendedLogFormat, according to the doc here:
[http://edocs.bea.com/wls/docs100/config_wls/web_server.html#elf]
However, when I do this, and modify the startup classpath to point to my jar containing the class, and modify the log format to include this class, I see in the logs:
bq. * Attempting to initialize ExtendedLogFormat application specific header: x-com.on24.weblogic.logging.POSTDataLogField. However, failed due to exception.*
(POSTDataLogField is the name of my log field class).
This is very frustrating, because nowhere in ANY log (and I've set the log level as verbose as possible in all places) is any Exception shown.
Does anyone know how I can find out what this mystery exception is, in a case like this? I've looked at all the logging options, and didn't find anything I could change to be any more verbose than I already am.
- Tim

Hi. I'm using version 2.1.11 of the NDK for CSharp. I'm getting this
same error message:
Code:
Connection.freeWriteSemaphore(-2): semaphore not owned by any thread
at Novell.Directory.Ldap.Connection.freeWriteSemaphor e(Int32 msgId)
at Novell.Directory.Ldap.Connection.connect(String host, Int32 port, Int32 semaphoreId)
at Novell.Directory.Ldap.LdapConnection.Connect(Strin g host, Int32 port)
at TestLDAP.Program.Main(String[] args) in D:\Documents and Settings\tjbuege\my documents\visual studio 2010\Projects\TestLDAP\TestLDAP\Program.cs:line 20
This occurs when I try to bind to a server that does not exist. Here
is my sample source code that generates that error:
Code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Novell.Directory.Ldap;
namespace TestLDAP
class Program
static void Main(string[] args)
LdapConnection conn = null;
string host = "server.does.not.exist.com";
int port = 389;
try
conn = new LdapConnection();
conn.Connect(host, port);
catch (Exception ex)
Console.WriteLine(ex.Message);
Console.WriteLine(ex.StackTrace);
if (conn != null)
conn.Disconnect();
Is there a fix for this? It makes this library useless for me.
Thanks,
Tim
tjbuege
tjbuege's Profile: http://forums.novell.com/member.php?userid=108957
View this thread: http://forums.novell.com/showthread.php?t=365082

Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found

NOTE: This thread was started in the flash pro forum: http://forums.adobe.com/thread/898879?tstart=0 . However, because of adninjastrators recommandation, I open the thread here:
Hello there,
I have started a stream from Flash media encoder to flash media server. According to my encoder, it should be located at: "rtmp://localhost/live" and is called livestream.
In the Flash software I try and set the source of FLVPlayback component to "rtmp://localhost/live/livestream", and I get this error: "NetStream.Play.StreamNotFound : Adobe Flash tried to play a live or recorded stream that does not exist. Source can't be found.". Both the server and encoder is runnind and I am encoding.
Too, when I try and open the html with the stream in a browser, nothing appears.
What should I check?
Thanks.
Kind regards,
Marius

Thanks for your reply.
Server, encoder and player are all on the same computer.
Admin console confirms the existence of "livestream" of type "Live" and a "NetStream" called "ABAF". No idea what the latter is.
Also, thought I'd mention that I have to start the servers from the Control Panel -> administrative tools -> services. If I try and start the server from the start menu, they dont start.
Thank you for your time.
Kind regards,
Marius

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

C# error when connecting to ldap server that does not exist

When using Novell.Directory.Ldap.dll and making a connect to an ldap
server which does not exists i'm getting the following error:
Connection.freeWriteSemaphore(-2): semaphore not owned by any thread
Im using this to connect: conn.Connect(ldapHost, ldapPort);
This error is not catched by LdapException. Can anyone tell me if this is
a bug or do I have to do something different.

Hi. I'm using version 2.1.11 of the NDK for CSharp. I'm getting this
same error message:
Code:
Connection.freeWriteSemaphore(-2): semaphore not owned by any thread
at Novell.Directory.Ldap.Connection.freeWriteSemaphor e(Int32 msgId)
at Novell.Directory.Ldap.Connection.connect(String host, Int32 port, Int32 semaphoreId)
at Novell.Directory.Ldap.LdapConnection.Connect(Strin g host, Int32 port)
at TestLDAP.Program.Main(String[] args) in D:\Documents and Settings\tjbuege\my documents\visual studio 2010\Projects\TestLDAP\TestLDAP\Program.cs:line 20
This occurs when I try to bind to a server that does not exist. Here
is my sample source code that generates that error:
Code:
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using Novell.Directory.Ldap;
namespace TestLDAP
class Program
static void Main(string[] args)
LdapConnection conn = null;
string host = "server.does.not.exist.com";
int port = 389;
try
conn = new LdapConnection();
conn.Connect(host, port);
catch (Exception ex)
Console.WriteLine(ex.Message);
Console.WriteLine(ex.StackTrace);
if (conn != null)
conn.Disconnect();
Is there a fix for this? It makes this library useless for me.
Thanks,
Tim
tjbuege
tjbuege's Profile: http://forums.novell.com/member.php?userid=108957
View this thread: http://forums.novell.com/showthread.php?t=365082

My IPhone is asking me to type in my password for my old Apple ID that does not exist anymore. I cant set up ICloud without typing in a password to a Apple ID that does not exist, so do I have to remove everything from my IPhone and start over?

my IPhone is asking me to type in my password for my old Apple ID that does not exist anymore. I cant set up ICloud without typing in a password to a Apple ID that does not exist, so do I have to remove everything from my IPhone and start over?

Hello miamat2017
You should see an option to skip that step and then sign out of it when looking in Settings. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G.

A great accessory that does not exist?

Similar Messages

Maybe you are looking for