A group by field needs to appear on every page of the report.
Hi.
My rtf template has a word header which is the report descriptn that appears on evry page. The report is grouped by business unit and then grouped by job description. The problem is the business unit appears only first time when it gets changed and then it does not repeat its value until the next BU comes up. I want to display the BU on each page even though the value is same (just like as a heading of a section). I used the follwing tags. The one in bold is to solve the issue of puting the BU descr on each page. But does not work. Anybodys help is greatly appreciated.
*<?fld_BUSINESS_DESCR?>*
<?for-each-group:row_CU_DET_STG;./fld_BUSINESS_UNIT?><?sort
<?fld_BUSINESS_DESCR?>
<?for-each-group:current-group()/fld_JOB_FUNCTION?>
<?fld_JOB_DESCR?>
Sid
Thanks alot Tim for spreading your expertise. That worked !!. I added the start and end body tag along with your solution of using the section with the group and it worked. Thanks alot again. However there is one prob now the page numbers are being reset and i dont want to reset it because the page numbers should continue in sequence till the end of the report despite of Business Unit change. Please any suggestion to solve this problem.
Edited by: user12107527 on Oct 27, 2009 6:50 AM
Edited by: user12107527 on Oct 27, 2009 9:06 AM
Similar Messages
-
Line tool marks are appearing on every page
I received a mortgage disclosure statement that I have to sign. There is no security on the document. When I use the Line Tool to check off some of the boxes though, the lines appear on EVERY page of the document. I only need it on ONE page. I checked some of my other PDF files and this problem is not happening on those documents. I am using Acrobat 9. I would appreciate any help on this.
I'd rather not share it because it's mortgage application with lots of personal data on it. It was a PDF file E-mailed by the mortgage company to me. I have to sign a bunch of pages and return.
I guess I could print it as an image to a new PDF and then sign and comment everything that way.
I'm trying to scan all the manually signed documents now, and it is taking forever because it is so many pages. -
How do I get banner & Spry Menu Bar to appear on every page?
Hi,
I am a new user of Dreamweaver CS6 an a relatively new user to website development in general.
I just followed along through Davide Powers "Creating your first website" tutorial series and found it to be very helpful. I made it through all six parts and managed to get the Check Magazine sample website up and running. I now want to use what I learned to creat my own site, and I am stuck already.
The tutorial does a great job of explaining how to setup a Spry Menu Bar to use for navigation. The tutorial, however, only shows how to put this Spry Menu Bar on the main index.html page. For my actual site, I would like my navigation bar (and my banner) to appear on every one of my pages.
Can anyone here tell me where I can find instructions on the best way to do this?
My navigation requirements are very simple. I just want a common banner with navigation buttons to appear at the top of every one of my pages. The Spry Menu Bar that was created in the tutorial would work great for me assuming I can find a relatively simple way to get it (along with my banner) to appear at the top of every one of my pages.
If it is very complicated to get it to appear on every page (or would require a large time investment in learning advanced techniques), then I would consider passing on the Spry Menu Bar and trying to setup my navigation in a simpler (if more old-fashioned) way.
Any advice will be greatly appreciated.
Thanks in advance,
PaulIf a small, 4-5 page site, make a prototype page with all your columns, headers, footers, menus, etc... and go to File > SaveAs index.html, and then File > SaveAs > page1.html, and then File > SaveAs page2.html, etc...
Or you can save your prototype page as a Dreamweaver Template (.dwt file). Add editable regions for stuff that will change from page to page. Everything outside editable regions is common to all site pages. Then use your Template to spawn site pages. File > New > Page from Template, index.html, page1.html, page2.html, etc.... DW Templates are nice site management tool. But before you use them, read all you can about them in F1 Help as they can be a little tricky to master.
Last but not least, look at Server-Side Includes. They're a huge time saving feature. I use them on every site I build.
Server-Side Includes
http://www.smartwebby.com/web_site_design/server_side_includes.asp
Nancy O. -
How to get the text field in the header for only first page of the report
Hi,
I am developing reports in BI Publisher Enterprise where i am facing problem i.e., i have to get some text field in header,for only first page in the result but it is displaying in all the other pages of the report in result.So,please if you have any idea of how to solve it, please reply.It is required as early as possible.
Thanks in AdvanceInvalid path? What are you doing? Writing the report output to an invalid directory?
Where are your terms and conditions? It would be very easy just to put them in a database table and select them in your report query. -
Need to add a new page in the SAP Script as last page
Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
I used NEW-PAGE END in the main window but it is not working and also I trired with CONTROL_FORM this also not working.
Thanks,
Ravi.Hello,
I need to add a new page in the SAP Script as last page.
Currently I have three pages in the form(FIRST,NEXT,LAST). For this I created one more page END.
FIRST page next page is NEXT
NEXT page next page is NEXT
LAST page next page is LAST
END page next page is END.
Create the text element in the main wondow of your form
/E ENDPAGE
/: NEW-PAGE END
and call the element from your print program by using write_form, where you want the END page in your print.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'ENDPAGE'
EXCEPTIONS
element = 1
window = 2.
Thanks,
Ravi. -
Strange little bar codes appear around every icon on the screen of my imac?
strange little bar codes appear around every icon on the screen of my imac?
thankyou peoples, i believe you & think that i may have 'failed electrolytic capacitors', which is somewhat reasurring as it means that this machine is not about to explode. besides its better than kidney failure or heart failure or generally life failure. its time to upgrade anyway so i think this is a message to do so.......really appreciate your help......
-
Creative Zen ad keeps appearing on every page i surf on IE. Please help
Hi Everyone,
I have a creative zen ad that keeps appearing on every page of my IE (every other site i browse the same ad appears within the page i surf to). Which software is doing this? Thanks.KHi A02460,
Can you post up a screenshot of that Creative ZEN ad?
You might also want to log a case with support so that they can assist you. -
I have uninstalled and reinstalled a few different versions of firefox to check if this was the problem but no. As soon as firefox has started the box appears with the triangle with ! in it the number 2 and the button ,ok.
I have to press ok to get the page on every page i open. I need help!This is caused by the InternetEngine - Powering Applications! extension. If you uninstall that extension it should stop this happening.
https://support.mozilla.com/kb/Uninstalling+add-ons -
Disable a group of check boxes when we open a page in the display only mode
Hi all,
I need help in making a group of checkboxes display only when i open it in the display mode. I have made the following coding for it,butits not working.Can you help.
MODULE disable_indicator OUTPUT.
IF action_type = display_only.
LOOP AT SCREEN.
IF screen-name = INDICATOR_SET_OVERDUE_ITEM'.
screen-input = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF screen-name = 'INDICATOR_SET_OVERDUE_ITEM'.
screen-input = 1.
MODIFY SCREEN.
RETURN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. "Hi Kushaal Choudri,
Chek out in Debug mode if first IF condition is triggering or not ?? Also assign Screen Group if u want to disable multiple fileds at a time and use it in IF condition...
MODULE DISABLE_INDICATOR OUTPUT.
IF ACTION_TYPE = 'DISPLAY_ONLY'. ==> Put it between Single Quote and check the CASE as it's case sensitive...
LOOP AT SCREEN.
IF SCREEN-NAME = 'INDICATOR_SET_OVERDUE_ITEM'.
SCREEN-INPUT = 0.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSE.
LOOP AT SCREEN.
IF SCREEN-NAME = 'INDICATOR_SET_OVERDUE_ITEM'.
SCREEN-INPUT = 1.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
ENDMODULE. "disable_indicator OUTPUT
Hope it will solve your problem..
Thanks & Regards
ilesh 24x7 -
Need to show No applicable data in the report.
Hi All,
We ave a key figure in the selection screen. And user will enter the value. based on the input, the report has to display less than or equal to the entered value as a result in the output of the report.
Input NIV as 67,169.48 then below results -
If user gives input NIV as 16,544.14 , the below output is showing.
But we need to show zero as result or no applicable data in the report. Is it possible to achieve through FORMULA.Please help on this
Thanks.Hi Jalina,
Yasemin already asked few questions.
but this is what we may do:-
to create a formula variable and use it for user input. use this formula variable in a formula , if your NIV kf<= formula variable, then NIV KF, else, 0.
then make a condition on this KF, not equal to zero to suppress this record.
regards,
Sakthi. -
Text Box to appear on the last page of the report
Folks,
I have a report where I am using SAP BW Hierarchy in rows. So the rows may increase or decrease.
I also want to add a Text box with some Text at the end of the report.
Since Report may have many pages or one pae how can I force this box to appear at the end of the report not at the end of each page?
I will appreciate your help.
Thanks
Bashir AwanHi
add a single blank cell to your report, let it display the required text and position the cell relative to the bottom edge of your main table. (Properties->Appearence->Page Layout->Relative Position)
Regards,
Stratos -
Need Category Description on Category Page, not the Category Thumb
Hi
I am trying to add the category description to the top of the category pages themself, and not on the category image. The latter is easy, as I just omit the tag, but how do I get to talk about the category of flowers on the same page where the list it, as aside from creating pages geared for the categories themselves and dropping their respective product list themselves?
I think I just answered my own question, but if anyone has a solution the omit creating the individual pages themselves, that would be helpful.
Here is a typical category page
http://milagrawholesaleflowers.businesscatalyst.com/ourflowers/peonies
And attached is a screenshot of the where I would to inser the category description tag. When I put it on this page, the product description gets picked up and repeats for each thumbnail.
Thanks, TeejayWhich is what will happen
Some will tell you to css hide it but that is not good enough. Search engines will still pick that up and being above the product - bad.
You can put it at the bottom and javascript it into an element at the top so it appears at the top but when the large product div is on a page (condition statement) then you do not do that and it is hidden at the bottom.
Still not ideal because search engines could consider you trying to fill kewwords into a hidden area. -
User writes notes that then appear on every page and added to
Hi
I want my users to be able to take notes and then for the notes input box to appear on all pages and even let the user add to their notes, which then appear on other pages.
I did ask this before but they reply i got doesnt seem to work.
ThanksHi there
If you can, please post a link to the answer that was given that doesn't seem to work. If you can't do that, please post back and just advise what it was.
I'm not sure exactly who the original person that said this was, as the web seems to attribute different individuals. But it goes like this: The definition of insanity is repeating the same thing over and over an always expecting different results.
Just so we don't seem insane...
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
0CO_ITEM_TX field needs to appear in the report
Hi,
I have a report which gets data from MULTI PROVIDER in turn from DSO 0CCA_O09 CO-OM-CCA: Actual - Line Items. This DSO has the field 0CO_ITEM_TX - but when I try to drag it in from dso to multi provider screen it disappears in the data fields of dso.
This Info Object is marked as attribute only and it gets errors when it is activated by unchecking the attribute only..
Please let me know how to make this field available in multi provider for reporting?
Thanks in advance
AnilRoberto,
When I uncheck it and try to activate it it gives me errors:
EXCEPTION CX_RSRV_SID_CREATION_ERROR occured (Program:CL_RSDRO_GET_SIDS_FOR_ODSO====CP, include:
CL_RSDRO_GET_SIDS_FOR_ODSO====CM004,
I do not know if I give aclear picture, but if you can provide me ur mail ID, I can send you the screen shot of it. Thanks -
Need help figuring out how to make all images appear on every page
Hello,
I user Dreamweaver MX and created this site for my church
www.ccosj.com. When I created the site I used image ready for the
ind. parts of the page. Loading them into dreamweaver and adjusting
the rollovers there (with some tutorial help since I am not that
good at it) I get the pages all to look great on my computer but
when uploading to the site, every page I click on all the images
reload and therefore the pictures constantly look as if they are
reloading. What am I doing wrong? should I take the preload script
out? Why does it look good on my computer but not on the site? Any
help would be appreciated but please know I am a novice at this.
BernadetteUpdate it using iTunes on your computer instead of trying to do it over the air. The space requirement doesn't apply.
In addition, when doing so, you can choose download only initially, allowing you to unplug the phone and go about your day while iOS downloads. Then, when it's finished downloading, you can plug it in and update it without having to wait.
Maybe you are looking for
-
HI gurus, i posted one payment through F-53 after when i am planning to issue check from FBZ5 by giving that document it is showing the following error. "Line item for outgoing payment cannot be determined; check Message no. F5 474 Diagnosis In the d
-
New iPad Tablet launch benchmarks?
Our new iPad tablet magazine app has now been in Newsstand for 4-weeks. We have had over 8,800 downloads during this time. Question is: While these numbers seem fabulous to me, we've had advertisers ask us if those numbers are "good" competitively?
-
Currency Coversion and Exchange Rate Issue
Hi, I have a scenario in query which is related to currency conversion and exchange rates. Company Code Matter Code Invoice Invoice date Amount Number (DD/MM/YYYY) 1001 1111 IN
-
How to handle a java.lang.OutOfMemoryError???
I use java1.1.7A. In prog. a outofmemoryerror occours when using a JEditorPane.EditorKit.read(xx,xx,xx). I catched it and forced running a System.gc( ) to make the garbage collector active to enlarge the memory. But it seems it didn't help. Has anybo
-
Executing subroutine after commit work, not on commit work
Hi All, I want to execute my sub-routine after commit work, not on commit work. If any one have answer please mail me at [email protected]