A group of folders is being created inside of Movies?

I keep finding folders being created inside the movies folder. The title is ( A Document Being Saved By StompUtil) with the titled being incremented with each new one. I now have 3 of them.
What is going on here?

Similar Messages

Folders being created inside movies ?

Forders keep being created inside movies. The label is (A Document Being Created By Stomputil). The title is the same each time except that a number is added to the end and increments up.
I Have not seen this before Yosomite.
IS this a cause for concern and what's this all about ? I have searched and found enough reference to Stomputil to think its not malware, but no reference to my case.

Tom Wolsky wrote:
... How'd you get Music & Sounds up into the toolbar?
cmd-'n drag allows you to place any files/folders into the commands-bar.
cmd-'n drag allows to drag any unwanted content out of the command-bar ...

Group Folders not being created

Hi folks,
i think this is a simple question: i got Mac OS X 10.4.4 Server with OD and Mobile Homes configured. I set up some custom Groups but the Group Folders are not being created automatically. I think there is a terminal command to do this. Does anyone know that command?
Greets

Is it the CreateGroupFolder command?
(15297)

Home Folders Not being Created Correctly

I'm having some sort of major issue with my directory and/or afp setup.
I'm trying to create new users and the home folder won't be created at all. If I change the permissions (give write access to the user's group) on the root of the share that hosts the home folders it will create one but it is mangled. The home folder only conatins a Library and Desktop Folder. Documents, Movies, Music, Pictures, Public, and Sites are missing. Also the permissions on this newly created home are mangled being 700 instead of 755.
All Existing Users are functioning okay but creating new home folders is broken. It has been a while since I've needed to create new users. I'm worried it may be hard to isolate the cause and effect. I have done software updates 10.4.6 and now 10.4.7. Also I changed this machine to handle local DNS.
Any Ideas?
XServe G4 1.0 Single 500GB Mirrored RAID on Internal Drives 10.4.7 Server

We also have this problem, and before I go and re-edit the home folder entries for each of our 600-odd users, I'd appreciate if you could confirm that this solution is going to work for me...
Troubleshooting another problem, we applied the x.4.6 update about the same time as the Network Mounts were turned off then a restart and turned back on again. A bad combination.
Faced with a Monday morning "None of the students can log in" crisis ("you are unable to log in to the user account "username" at this time..."), and thinking that the problem had been caused by my turning the network mounts off, I discovered that student mount points now show (in WM's Home tab) as "afp://10.224.96.2/Students" where they used to be "afp://mainserver.westlandhigh.school.nz/Students".
The easy fix to the problem (not knowing about artnum 303697 at that point) was to reassign the home folders to the 10.224.96.2 home. (when you don't know what to do, you do what you know how to do). This got the users happily working again, although there were all sorts of strange problems relating to disk quotas that some users had to work through.
a few days later the log entries about DNS were noted, artnum 303697 applied, and changeip fixed those things. hostname responds correctly as mainserver.westlandhigh.school.nz. Everything ran reasonably well for the next couple of months, although the AFP/CPU hogging problem mysteriously appeared...
x.4.7 seems to have solved the AFP/CPU hogging, but now we've discovered a problem creating home folders for new users.
Tim's fix on 3rd August shed some light... An interesting quirk of using Presets is that we still have a Student preset that puts the FQDN name in the home folders list. So we can leave the FQDN home folder selected, click Create Home Now, and on Save, the folder is created. But the student can't login: "you are unable to log in to..."
Change the mount point to the IP number, Save, and it almost works - the system tells the user they are already logged in to another computer... Selecting Allow simultaneous login from Advanced solves this problem, but leaves the system open for the student to attempt to log in twice, with the potential for havoc there. It's also not a wonderful work around as the other staff who sometimes enter new users are likely to miss one or more of the extra steps...
I guess that I'm going to have to turn Network Mounts off in Sharing, and then turn them on again to get the right set of mount points showing in Accounts/Home, and then work my way back through all the students and point them back to the FQDN mountpoint again?
Is it likely to be worth the pain? Will it cause some other problem to arise? Is there an easier way?
G4 DP 1.25 Mac OS X (10.4.7)
G4 DP 1.25

Inbox folders not being created from msf files

Last week, I noticed that my Inbox folder files weren't appearing in my profile. I posted a generalized question here: https://support.mozilla.org/en-US/questions/996903
The response I received didn't help that much. The folder I created appeared on the remote mailbox as empty folders.
My mail account is synced via IMAP to a remote Zimbra mail client using STARTTLS. I can view my Inbox. The other folders in my Inbox account are not visible. I can send and recieve messages from my INBOX.
When I select "Manage folder Subscriptions" In the account options, I can see the folders. When I select them, and click the "Subscribe" button, nothing happens.
Inspecting my IMAP directory, I see the following structure:
~/.thunderbird/13zr0oo0.default/ImapMail/mail.<zimbra_account>.com:
-rw-r--r-- 1 matthewe matthewe 1238 May 2 10:38 Archives.msf
-rw-r--r-- 1 matthewe matthewe 1235 May 2 10:38 Drafts.msf
-rw------- 1 matthewe matthewe 47500385 May 2 09:56 INBOX
-rw-r--r-- 1 matthewe matthewe 375885 May 2 10:36 INBOX.msf
-rw-r--r-- 1 matthewe matthewe 25 May 2 08:58 msgFilterRules.dat
-rw-r--r-- 1 matthewe matthewe 1233 May 2 10:38 Sent.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 10:38 site-errors.msf
-rw-r--r-- 1 matthewe matthewe 0 May 2 09:59 Templates.msf
-rw-r--r-- 1 matthewe matthewe 2275 May 2 10:33 Trash.msf
The msf files are created when I click the "Subscribe" button but subsequent Mail files containing the mail data are not (note that non-msf files exist only for "INBOX".)
Removing .msf files and restarting Thunderbird has no affect.
When I launch, the errors console reports the following three errors:
"Could not read chrome manifest 'file:///usr/lib/thunderbird/extensions/%7B972ce4c6-7e08-4474-a285-3208198ce6fd%7D/chrome.manifest'.
-- There is no chrome.manifest file in my filesystem under /usr/lib/thunderbird/extensions/{972ce4c6-7e08-4474-a285-3208198ce6fd}"
"While creating services from category 'profile-after-change', could not create service for entry 'Disk Space Watcher Service', contract ID '@mozilla.org/toolkit/disk-space-watcher;1'"
This is reported as https://bugzilla.mozilla.org/show_bug.cgi?id=883621 and has been resolved at https://bugzilla.mozilla.org/show_bug.cgi?id=895964 but my system still throws the error. (I have plenty of disk space. Permissions perhaps?)
[JavaScript Warning: "Calendar https://mail.zimbrahostedemail.com/home/matthewe@<zimbra_client>.com/Calendar has a dangling E-Mail identity configured."]
I'm not sure what that means.
I am using Thunderbird 24.5.0 on Ubuntu 13.10

Is your question about files not being created, or because you cannot send and receive mail, or both?

Duplicate folders being created within folders

I am noticing that since we started using Contribute on our
website that duplicate folders are being created within the folder.
For example - I have a folder called Ministries. Inside Ministries
are three subfolders - Peru, Brazil & Mexico. I'll go in to
upload a page to the Mexico subfolder and find that the entire
Ministries folder has been duplicated inside the Ministries folder.
So instead of looking like this:
Ministries -
Peru
Brazil
Mexico
It looks like this:
Ministries -
Peru
Brazil
Mexico
Ministries
Peru
Brazil
Mexico
Has anyone else encountered this? I haven't been able to find
any coding issues that would account for this. I admit that I
probably just don't know enough to know where to look.
Any assistance would be greatly appreciated.

Hi,
I am unable to reproduce this issue when using Contribute.
Could you please check if that system is infected by any
virus?
Please look the following site:
http://www.imserba.com/forum/archive/index.php/t-71175.html
Thanks,
Radhika

Excise Invoice being created before standard Invoice is created

Hi
I create a sales order. With reference to the sales order I create a delivery.
With reference to the delivery, in VF02, if I try to create an Invoice, I get the following message - Excise Invoice created for the Invoice 597500041.
I need the standard invoice to be created first and using the Tcode Ji11n I should create the Excise Invoice.
But instead I get the above message.
What settings should I check and correct.

Dear Vaideeson Marap...
As per my understanding of your question
If excise invoice is being created automatically the movement you create the commercial invoice in (vf01) ,you need to remove the check box in "excise invoice during billing " respective excise group.
Please check and revert
Thanks&Regards
Raghu.k

Accounts being created with administrative group rights

Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
User Account Created:
    New Account Name:    username
    New Domain:    PCNAME
    New Account ID:    PCNAME\username
    Caller User Name:    PCNAME$
    Caller Domain:    DOMAINNAME
    Caller Logon ID:   (0x0,0x3E7)
    Privileges       -
Attributes:
    Sam Account Name:    username
    Display Name:   <value not set>
    User Principal Name:   -
    Home Directory:   <value not set>
    Home Drive:   <value not set>
    Script Path:   <value not set>
    Profile Path:   <value not set>
    User Workstations:   <value not set>
    Password Last Set:   <never>
    Account Expires:   <never>
    Primary Group ID:   513
    AllowedToDelegateTo:   -
    Old UAC Value:   0x2DAB2B0
    New UAC Value:   0x2DAB2B0
    User Account Control:   -
    User Parameters:   <value not set>
    Sid History:   -
    Logon Hours:   <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID:   (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
    User name:    DOMAINNAME\PCNAME$
    Auth package: NTLM
    Logon type:   (none)
    Session:      0
    Sid:          S-1-5-18
    Logon time:   9/11/2014 12:41:53 PM
    Logon server:
    DNS Domain:
    UPN:
        4: System
      316: smss.exe
      364: csrss.exe
      392: winlogon.exe
      440: services.exe
      452: lsass.exe
      628: svchost.exe
      756: LMAgent.exe
      840: svchost.exe
     1000: spoolsv.exe
     1252: avagent.exe
     1268: camWMIAgent.exe
     1324: cissesrv.exe
     1380: cpqrcmc.exe
     1404: vcagent.exe
     1440: svchost.exe
     1480: HsQuotas.exe
     1740: inetinfo.exe
     1780: EmailAgent.exe
     1856: snmp.exe
     1884: sysdown.exe
     1920: smhstart.exe
     2192: svchost.exe
     2388: cmd.exe
     2396: hpsmhd.exe
     2444: cqmgserv.exe
     2464: cqmgstor.exe
     2484: HSphere.exe
     2596: wmiprvse.exe
     2676: cmd.exe
     2684: rotatelogs.exe
     2692: cmd.exe
     2700: rotatelogs.exe
     2732: searchindexer.exe
     2812: hpsmhd.exe
     2824: cqmghost.exe
     2852: svchost.exe
     3044: cmd.exe
     3052: rotatelogs.exe
     3080: cmd.exe
     3088: rotatelogs.exe
     5452: svchost.exe
     5596: GravitixService.exe
     7392: csrss.exe
     7232: winlogon.exe
     6888: csrss.exe
     9832: winlogon.exe
    10388: wawrapper.exe
    10352: cpqnimgt.exe
     9496: msiexec.exe
     6068: w3wp.exe
     4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid:          S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank you

Hi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy

How can you prevent encrypted folders that you created in disc utility from being deleted?

How can you prevent encrypted folders that you created in disc utility from being deleted?

bibst wrote:
How can you prevent encrypted folders that you created in disc utility
You cannot create encrypted folders in, or encrypt folders with, Disk Utility.
You can create with Disk Utility encrypted disk images from folders. I assume that's what you mean.
The proper way to do it is by setting the immutable bit. Read here
<http://www.thexlab.com/faqs/immutableflags.html>
about the immutable bits (and the trouble they sometimes create).
The user immutable bit (uchg) is the same as the Finder lock, as described above by X423424X. It's a weak lock, with only a warning.
The system immutable bit (schg) is more powerful. Once is set, the item cannot be deleted in Finder (even though Finder will ask for your password and may give you the impression that it can trash it; it will end with an error).
I set it in Terminal, thus
$ sudo chflags schg my_encrypted_disk_image
and unset it also in Terminal
$ sudo chflags noschg my_encrypted_disk_image
(Note that, when you unset the system immutable bit, the change won't be reflected immediately in Finder, but the item can be trashed nevertheless.)

When i go to my email providers email site I see that my TB dashboard folders that I created in TB are being copied there. How do i make that stop?

When i go to my email providers email site I see that my TB dashboard folders that I created in TB are being copied there. How do i make that stop

That about sums it up Keith. You provided may offer pop, most offer IMAP as an add-on to their traditional POP. Thunderbird when setting up an account will default to using pop unless you specify otherwise as that is the current consumer expectation (synchronized mail)

Lightroom 4.3 Duplicate folders being created on import

Hi, is anyone else gaving issues with duplicate folders being created with Lightroom 4.3 on import?
When I import photos, they go to a folder with a name "XXX" for example.
The folder is in a hierarchy of "2013, March, XXX".
Lightroom creates a folder here and above 2013! It is making a mess of my library.
Also, when I import using Photo Mechanic (great software that just works!) and then do a "synchronize folder" in Lightroom, only 1 photo is transferred.
Is there a fix for these bugs?

It looks to me as though you've fallen victim to the "capitalisation" issue....in your Folders Panel your year folders names have the word "LIBRARY" in capitals, yet in the screenshot of the import dialog you are importing to "LR_Library_2013". I guess at some point you changed the capitalisation, and although the OS doesn't distinguish between the two formats, Lightroom unfortunately does.....so although all the images/sub-folders are within the one actual year folder, Lightroom sees them as two different parent folders.
So which one is the correct format as shown in Win Explorer? I'm guessing the lower-case version? If so, the quickest way to fix this is as follows:
1. Backup your catalog.
2. Create a root level folder on the C drive, call it whatever you want, say "Capitals Fix".
3. Right-click on the "LR_LIBRARY_2013" year folder in the Lightroom Folders Panel and select "Update Folder Location". In the file browser that then opens, browse to and select the "Capitals Fix" folder on the C drive.
4. Don't be alarmed as the 2013 folder will disappear from the Folders Panel, "Capitals Fix" will appear but all the sub-folders that were listed under 2013 will now have "?" marks.
5. Now right-click on "Capitals Fix" in the Folders Panel, and again choose "Update Folder Location". This time browse to and select the correct "LR_Library_2013" folder on the A drive. You may get a "Merge" dialog box, select "Merge" and everything should resolve itself.
6. Repeat if needed for the 2011 and 2012 year folders, though as you're likely not importing into there any longer you may not encounter the problem.

.DS_Store files on USB thumbdrives - a way to stop them from being created?

Hello!
Forgive me if this has been asked to death, but at school I need to copy homework files back and forth to the school's XP-based computers constantly. Because in any given day I usually update half a dozen files across the "homework" folder on my Powerbook, it's easier just to copy the entire folder (and its subfolders) to my 2-GB, FAT-32 formatted flash drive each night - all 500 files (and 150 MB). Of course, this also leaves hundreds of .DS_Store and ._filename files to clutter "Windows explorer" windows.
My question is how do I remove (and prevent creation of) these files selectively? I know that they are used by the finder to store thumbnails, spotlight comments, and labels. The big problem is that while I want to remove these files from the homework folder (and some other folders), I DO NOT want to remove them from a few other folders on the flash drive - which I use to make quick backups of files from my Mac.
I know that I can prevent OS X from creating them altogether with certain utilities, and I know that I can get third-party utilities that allow me to remove these files from flash drive and/or prevent the creation of the files for entire volumes, but is there something I can do to remove them from only certain folders?
Also, since I do not always know beforehand what directories I might make, I'd like to be able to create a "white list" of only certain directories (and their sub-directories)that won't be touched, while all others will have their ".DS_Store" and "._filename" files removed.
Finally, because I'm often a hurry when I go to copy files, I'd rather not sit there and run terminal commands or a program every time I copy a folder over to the flash drive. Is there some way to prevent them from being created in these certain folders altogether, automatically? An applescript or terminal command that I can program to run from the script menu perhaps? I don't mind opening a program or script, I just don't want to have to sit there manually removing the files.
Thanks,
-Dan

I had a similar problem awhile back and asked for help in the Applescript forum:
http://discussions.apple.com/thread.jspa?threadID=954738&tstart=0
Unfortunately the revised jive software formatting function here in the forums has totally messed up things like posted scripts. What you'll see in the scripts discussed is no longer what was there originally. I just now put a copy of the script I'm using up in zip format here:
http://homepage.mac.com/francines/.Public/CopyStrip2Fat.zip
Unzip and open in Script Editor to get some idea of what it is really supposed to be. The idiot formatting of the revised jive software has replaced some things with a carriage return, a semi-colon, and close quote, thus rendering some lines meaningless.
To see the source of the script I quoted, see this MacOSXHints thread:
http://www.macosxhints.com/article.php?story=20040726164957299
The script is in the comment by cougar718. You might take a look at other comments as well.
Francine
Francine
Schwieder

Un Wanted Folder is being creating in shared folder

Hi There
some unwanted folder is being creating in shared folder (this shared folder is mapped in the network in users computers), these folders are in windows server 2008 R2. and Users machine with windows 7 Pro.
so i can delete these folder once but after next boot these folder will again created. if anybody wants i can share the screen shot of those folder which are being creating automatically.
Thanks
Prakash

Hi,
Did you solve the issue with the help of the people provided above?
Did the issue happen only for you or for multiple users?
If the issue persists, on Lync 2013 client, Option—Personal—Personal information manager: make sure you choose the “Microsoft Exchange or Microsoft Outlook”.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Text types along the horizontal border of the text box instead of being written inside of it. What's wrong?

I created a text box by dragging the horizontal text tool.
But when I start typing, the text aligns along the upper border of the box instead of being written inside of it.
It looks like this.
How can I fix this, so that the text is inserted inside the defined box?
Much thanks in advance!

I just figured it out! Can't believe I was this clueless.
I just had to change the font height back to 100%. Haha

How to deal with .csproj.user being created/modified by Visual Studio before the project is run?

So, what is the problem?
The problem is that Visual Studio considers .csproj.user a dependency of the project being run.
Let us assume the following:
- We have a freshly built solution containing a web application project `X` as the Start Up project.
- There are Silverlight applications served by the X web application.
- There is no `X.csproj.user` file initially.
Now consider the following flow of events:
1. Open the solution in the Visual Studio
2. Build.
3. Run.
4. A dialog is open to ask whether Silverlight debugging is to be enabled. Enable it.
5. Stop the debugging session.
6. Run again.
7. Stop the debugging session.
8. Run again.
Assuming nothing is built at step 2 (because the solution is totally up to date), will there anything be built at steps 3 and 6?
The answer is affirmative and here is why:
- The X.csproj.user file is actually created by Visual Studio when the project is requested to run. What happens next is that the
X.csproj.user file is considered a dependency of the project
X by the Visual Studio. Being created just now the file is newer than the project binaries and so Visual Studio builds the project
X. This explains why the project is built at step 3.
- When we agree to enable Silverlight debugging Visual Studio records this agreement in the
X.csproj.user file. So the file is modified again, after the project has started running. Restarting the debugging session is going to build the project
X yet again, after all X.csproj.user is again newer than the binaries built a second ago. This explains why the project is built at step 6.
Fortunately, nothing is built at step 8.
Call me petty, but I want to avoid the builds at steps 3 and 6. The problem is that I am not allowed to check in the X.csproj.user file, because that is likely to create a mess with people accidentally checking in their private changes.
On the other hand, I am unable to move its default content (along with the agreement to enable Silverlight debugging) into the project file
X.csproj. Well, I can, but it is just being ignored.
So, here is my question - is it possible to separate the content stored in a
.csproj.user into two groups:
- Permanent. These are the things I would love to have in the .csproj file. It will be checked in.
- Temporary/Private. These are the things private to individual developers. Never checked in.
Visual Studio already allows this separation for certain properties - see the
Apply server settings to all users (store in project file) checkbox in the Web properties tab of a Web application project - http://olalalittlen.wordpress.com/2011/07/20/vs-tips-managing-server-settings-in-web-projects-for-multi-developer-scenarios/.
However, it is insufficient.
Any other ideas on how to prevent the aforementioned redundant builds are welcome too.

Hi Mark,
I think your issue is more about project itself. the saved information in the .csproj.user settings is about the project's information.
So I suggest you post your issue to the related project forum.
web forms:http://forums.asp.net/18.aspx/1?Web+Forms
mvc:http://forums.asp.net/1146.aspx/1?MVC
Regards.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

A group of folders is being created inside of Movies?

Similar Messages

Maybe you are looking for