A Important problem about CMS Transport Studio Test Tab

Hi experts:
    I am use NWDI and modify ESS source code, when i check in my  modified project like esstratre and release  it .  In CMS  transport studio i consolidation , assembly it then test it .but i make a  fatal mistake,there is some mistake in project esstratre but i already check in it .So in the Test tab SMD deploy failed.
   Now i want restore the history version before i modify the project . But  what can i do? Please help me.Thanks a lot.
                         yours zunxian

HI,
there is some mistake in project ess~tra~tre but i already check in it
1. can you check out your DC and correct those changes? and check in  it.....its the best solution.
    and good for you , so you can keep some needed changes, present in that activity.
2. in DTR perspective there you can see versions in the version graph view.
3. or use sync to date option for your DC.
But the 1st option is preferable as a developer.

Similar Messages

  • NWDI check-in of CMS transport studio has no entries

    Hi,
    I want to use the CMS to import existing packages in a new one. The sld and the Landscape Configurator are configured and the packages are in the inbox of the CMS. But there are no packages shown in the check-in table of the transport studio.
    Have anyone had this problem before? Whats the reason?
    Kind Regards
    Norman

    Hi Norman,
    did you receive an answer to your question or did you find a solution by yourself?
    We are facing the same problem, we don't find the MSS Package in the Transport Studio for check in. We did copy the .SCA file into the import folder of the Transport Studio.
    Any help would be appreciated!
    Regards, Andreas

  • İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

    İ have just got ios 5.1 for ipad but i have really important problems about charge,how could i get ios 5.0.1 without loosing my items,documents,i can't sync because my computer has problems also,thanks

    Settings>general>reset>reset network settings
    Settings>general>reset>reset all setting

  • CMS-Transport Studio: Link Transport Organizer is disabled

    Dear Experts!
    When I using Change Management Service- Transport Studio, I see that the link Transport Organizer is disabled with information
    " Change and Transport System not configured for the selected Track" , I already config CMS and TMS as the document guide.
    Please help me resolve this problem.
    Thanks all.

    Hello Thao
    The situation looks more like an configuration issue, very
    probably caused by the error concerning the name of the RFC destination
    (note 1003674): Please ensure that the destination is named
    'sap.com/com.sap.tc.di.CTSserver', with only capital 'CTS', but
    completedly small 'server' at the end.
    Thanks
    Kenny

  • Error while importing to production through CMS Transport Studio

    Hi,
    I am trying to transport my application from development to Production using CMS tracks. All DC's are getting properly consolidated,Assembled and Approved. But while importing into the Production, it is throwing following error :
    *************ERROR LOG********************************
    Info:06/07/22 17:07:13 -  ERROR: Not deployed. Deploy Service returned ERROR:
    Info:                     java.rmi.RemoteException: Cannot deploy application asianpaints.com/hsspapp..
    Info:                     <b>Reason: Exception during generation of components of application asianpaints.com/hsspapp in container EJBContainer.; nested exception is:</b> Info:                          <b>com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application asianpaints.com/hsspapp in container EJBContainer.</b>
    Info:                          at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:554)
    Info:                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1555)
    Info:                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
    Info:                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
    Info:                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
    Info:                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    Info:                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    Info:                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    Info:                          at java.security.AccessController.doPrivileged(Native Method)
    Info:                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
    Info:                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Info:                     Caused by: com.sap.engine.services.deploy.exceptions.ServerDeploymentException: Exception during generation of components of application asianpaints.com/hsspapp in container EJBContainer.
    Info:                          at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:621)
    Info:                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:319)
    Info:                          at com.sap.engine.services.deploy.server.application.DeploymentTransaction.begin(DeploymentTransaction.java:307)
    Info:                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
    Info:                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
    Info:                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3139)
    Info:                          at com.sap.engine.services.deploy.server.DeployServiceImpl.deploy(DeployServiceImpl.java:539)
    Info:                          ... 10 more
    Info:                     <b>Caused by: java.lang.NoClassDefFoundError: com/apil/hssp/newhelper/TransactionDTO</b>Info:                          at java.lang.Class.getDeclaredMethods0(Native Method)
    Info:                          at java.lang.Class.privateGetDeclaredMethods(Class.java:1655)
    Info:                          at java.lang.Class.getMethod0(Class.java:1901)
    Info:                          at java.lang.Class.getMethod(Class.java:984)
    Info:                          at com.sap.engine.services.ejb.deploy.xml.CMPParser.getFieldClass(CMPParser.java:464)
    Info:                          at com.sap.engine.services.ejb.deploy.xml.CMPParser.fillCmpFieldInfo(CMPParser.java:88)
    Info:                          at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseCMPFields(CMPParser.java:646)
    Info:                          at com.sap.engine.services.ejb.deploy.xml.CMPParser.parseFields(CMPParser.java:121)
    Info:                          at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:174)
    Info:                          at com.sap.engine.services.ejb.deploy.xml.EJBJarParser.parseXml(EJBJarParser.java:97)
    Info:                          at com.sap.engine.services.ejb.deploy.DeployAdmin.parseSingleJar(DeployAdmin.java:297)
    Info:                          at com.sap.engine.services.ejb.deploy.DeployAdmin.generate(DeployAdmin.java:247)
    Info:                          at com.sap.engine.services.ejb.EJBAdmin.deploy(EJBAdmin.java:2144)
    Info:                          at com.sap.engine.services.deploy.server.application.DeploymentTransaction.makeComponents(DeploymentTransaction.java:606
    *****************ERROR LOG************************
    Both my development and production are on running on the same version.
    Kindly help on this issue.
    Regards,
    Yashodhan Mujumdar

    Hi Yashodhan,
    I had the same problem and resolved by adding reference of the Used DCs in application-j2ee-engine.xml of EJB project.
    The xml looks like:
    <reference
              reference-type="hard">
              <reference-target
                   provider-name="sap.com"
                   target-type="application">xappscprxrpmcommon</reference-target>
         </reference>
         <provider-name>sap.com</provider-name>
         <fail-over-enable
              mode="disable"/>
    thanks,
    Nancy

  • Problem about financial reporting studio(assign multiple db connection)

    Hi,
    I need to assign multiple database connections to a grid in Oracle Hyperion Financial Reporting Studio
    To do this, I performed the following steps:
    - Open a report.
    - In a grid, select one column for which I want to change the database connection.
    - In the Column Properties sheet, click the Select Database Connection button, .
    - In the Select a Database Connection dialog box, select a database connection from the Database Connection drop-down list, then Click OK.
    - In the Map Dimensions Between... dialog box, map dimensions between the default database connection and the selected database connection. I do this by selecting a dimension from the pull-down list in the right column for each dimension in the left column.
    - Optional: Select an alias table for the new database connection.
    - Click OK.
    But after last step I have received next error:
    *; nested exception is:*
    java.lang.NullPointerException
    Can someone explain the source of this error?
    And help me please solve this problem because I didn’t receive figures in that column where I changed database connection.
    Thank you in advance!

    I'm sure that both DB connections has the same dimension hierarchy. I can open the repot, but in it I don't see figures in that column where I've changed database connection...

  • Problems about financial reporting studio and planning

    Hi,all:
    Here are two problems:
    1. after i have installed the fr client in my pc,when i connect to the server,it promot an error infomation as follow:
    ; nested exception is:
         java.lang.NullPointerException
    and i can't open the fr interface and view the fr report
    2. When i create a new rule under business rules folder in Essbase Administration Servers,i select the outlin,but only the Essbase applications i can choose in the "avilable server",there is no Planning applications.
    Hope someone can give me a hand.
    Thanks very much.

    What's the version of Hyperion that you are using?
    For the first issue, if this is working in somebody else's pc, I would be suspected by your pc's security/java settings.
    For the second issue you mentioned below is possible answers:
    1. You can't write business rules against EPMA apps in AAS. Use calcmanager instead.
    2. Login to planning with your user name, launch a form, go back to AAS and try again.
    3. Make sure you've got access to write rules in AAS.
    Cheers,
    Alp

  • An important problem about Purchase

    Hi,i use Pre-payment Card (Which trade is Inial) in App Store.Despite of i did not download any Application in 17 Augst,App Store took 2.27$ on my card?How can i solve this problem?Who can help me?

    You've checked your account's purchase history to see what it was for : See your purchase history in the iTunes Store ?
    If you don't recognise the charge, and nobody else has access to your account or devices and made it, then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    Or you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Deletion of CMS transport list

    Hello,
    When XI objects are transported using CMS, a transport list gets created and thus we can track the transports.
    My question is - After XI objects are successfully transported from say source XI to target XI system, is it possible to <b>delete</b> a particular transport list (even using CMS admin rights) from source system ?
    Regards,

    Hi Norman,
    did you receive an answer to your question or did you find a solution by yourself?
    We are facing the same problem, we don't find the MSS Package in the Transport Studio for check in. We did copy the .SCA file into the import folder of the Transport Studio.
    Any help would be appreciated!
    Regards, Andreas

  • Query regarding CMS transport!

    Hi Experts,
               I hav an issue with CMS transport. - I hav done certain changes in a mapping for a specific name space say urn:XYZ. The software component for this name space is say SC1. This software component also contains several name spaces say urn:123. urn:456. urn:pqr. And some of them are active and some inactive
    Now as per process, I hav activated my specific messege mapping and then going to TOOLS- Export Design Objects - Mode: Transport Using CMS. -- Individual Objecis -......
    Now when I go to the CMS url....there after carrying out the necessary steps [ Pls refer to the following URL.This thing WILL take some time as it is a 2.5 MB file :
    http://www.esnips.com/doc/34d643fe-13b3-4c83-922a-c64db6b7e52d/Change-REQUEST-CMS-Process,-manual-Complete.
    It contains a word document with details step by step screen shot showing everything in details -- see page 17 and 18. I dont understand , why in the approval tab, the SOFTWARE COMPONENT name is suggested, the reason being, if i select the SOFTWARE COMPONENT, all other name space within this SOFTWARE COMPONENT apart from my desired development get trsnaported in Production!!
    EXPERTS, Pls check the doc in details,this is a kind of general manual  and tell me if I hav missed out some thing/ or hav done some mistakes , I think this can be a gud document !!
    Pls note, dont study the document by the NAME oF DEVELOPMENT perspective, I hav developed this doc from time to time with necessary changes / modifications !!
    Regards,
    Arnab.
    Experts, this question still remains unanswered!
    Edited by: Arnab Mondal on Oct 15, 2008 9:25 AM

    Hi Suddha,
              , it took me some time to prepare myself some answer.
    the conversation!
    Hi Arnab not a prob. I have not got a chance today to see your latest post on the thread, was busy with some stuff throughout the day.
    + Once Again Suddha , you managed time for me,, let me tell you, mine is not a very urgent issue, but YES, I want to get to the root of it!!!+
    As you have said that, you see all the objects in the Assembly Tab page, then do one thing, right after you assemble the specific component, refresh the tab
    and check if the other components get removed from the list, under Assembly Tab.
    Well, tet me tell you some thing, in my process, I DONT Assemble the Specific component . Let me make this part clear to you . Let me tell you the steps, I
    follow in details .
    1. Once the change is done in the mapping- I transport it as INDIVIDUAL OBJECTS, through CMS Transport.
    2. Log in to the Chanhe Management service!
    3.Click on the appropriate TRACk-- that is track for integration repository
    4.Click on teh aassebbly tab -- an assembly option arrives -- I select the " same suppot packages number as the last support package number!-- then click
    on the ASSEMBLE button.
    5. As a result of this all the 4 software components come into the list.
    Here I select the appropriate SCV by selecting the LINE. Pls note I dont go to the SELECT Comonent button and select individual SCVs.
    6. After selecting the LINE, I go to the approval tab, there I get to see all the SCVs, with severl datse. Here, I again select the appropriate SCV of mine based
    on day and time. I select the LINE-- then click on the CONFIRM button. As a result of which i get to see APPROVED, for that SCV.
    7. then I go to PRODUCTION TAB , again select the appropriate SCV line and click on the IMPORT button.
    These are my steps. This is what I was tought . And now i feel , I missed certain steps .Pls correct me !
    Then I must say that somehow you are assembling all the software components, somehow all the components are getting selected. I am having another
    doubt, if the components have dependencies, could that be the reason for this?
    Well as I described in step no 4 and 5 that I Do select the appropriate SCV in teh Assembley tab, by selecting the line but do not select it through "SELECT
    Comonent button and select individual SCVs. Is this where I am going wrong????
    Again, as  far as the Integration Repository developments are concerned, no two SCV has any dependency, I am sure about that, the major factor being, the
    3 SCV that I am working  on are CUSTOM SCV.!
    One more thing................if you are not going to the consolidation tab and importing the components into consolidation system, how are showing up in the
    assembly tab. Strange! don't you think so? You need to follow the sequence of steps. Are you sure you are not referring to some older transports?
    Well, this part ,I can smell RATs. Actually in my system I only have a  PI develoment and PI production server. This is my first XI proj, and the above 7 steps
    were all what I was told as necessary to send developments to Production. I hav absolutely no Idea of the utility of the CONSOLIDATION TAb, and the funda
    of importing the  components in the consolidation system. I donno anything about the installation of this CMS- Transport studio.But i can speak to the basis
    team, and tell you , if you want to know about any specific basis settings.!!!
    You need to follow the sequence of steps.
    Pls tell me what am I missing !!
    Are you sure you are not referring to some older transports?
    That is not possible as I can check the date and time. all 3 SCV s have the same date and time. It is in the approval tab, I select the appropriate SCV and
    send it for Production!!!
    Regards,
    Arnab .
    Edited by: Arnab Mondal on Oct 20, 2008 11:43 AM

  • Automatic deployment of Interactive Forms through CBS and Transport Studio?

    Good evening!
    I just finished my last changes on my first Web Dynpro project and a local build and deployment worked without problems.
    Now, when I check in the changes into DTR, activate and release the files, then my changes on different web pages are displayed but now the Interactive Form that worked before is no longer generated and no error message can be found.
    We are currently using Netweaver 2004 on our development systems with Web AS 6.40 PatchLevel 108290.313 on AIX 5.3 as our development portal.
    So, could you tell me where I can find errors of the Adobe Document Service ? I think that the problem is somehow connected to the ADS, but I am absolutely unsure.
    Thank you for your answers and for your help.
    Regards,
    Sascha

    We actually didn't have a problem with the transport studio and CBS, it all had to do with the usage of different browsers on the development system (with IE) and our development portal (which I tested from my local computer with Firefox) ... the problem was once again sitting between keyboard and chair.

  • Import SCA files in Development Tab of the Transport Studio take more time

    Hi,
    After Check-In files in the Transport Studio, the import of SCA files starts in the development Tab of the Transport Studio.
    The import takes more time. Why this happens?
    Am I missing any configuration? Please specify in detail.
    Thanks in Advance,
    Sathya

    SC: sap.com_SAP-JEE:
    SDM-deploy
    Returncode : Not executed.
    How to check the username, password and url for SDM?
    Log file of Repository-import:
    Info:Starting Step Repository-import at 2009-10-13 22:15:49.0484 +5:00
    Info:Component:sap.com/SAP_JTECHS
    Info:Version  :SAP AG.20060119105400
    Info:3. PR is of type TCSSoftwareComponent
    Info:Component:sap.com/SAP_BUILDT
    Info:Version  :SAP AG.20060411165600
    Info:2. PR is of type TCSSoftwareComponent
    Info:Component:sap.com/SAP-JEE
    Info:Version  :SAP AG.20060119105300
    Info:1. PR is of type TCSSoftwareComponent
    Info:Step Repository-import ended with result 'not needed' at 2009-10-13 22:15:49.0500 +5:00
    Log File of CBS-make :
    Import got failed.
    Info:build process already running: waiting for another period of 30000 ms
    Info:no changes on the CBS request queue (DM0_DEMObp1_D) after a waiting time of 14430000 ms
    Fatal:The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
    Fatal:There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
    Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.:communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
    com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. There seems to be a structural problem in the NWDI. Please look after the operational status of the CBS.
         at com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:369)
         at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:120)
         at com.sap.cms.tcs.core.CbsMakeTask.process(CbsMakeTask.java:347)
         at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
         at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:179)
         at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:376)
         at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:216)
         at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.execImport(ImportQueueHandler.java:585)
         at com.sap.cms.pcs.transport.importazione.ImportQueueHandler.startImport(ImportQueueHandler.java:101)
         at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:583)
         at com.sap.cms.pcs.transport.proxy.CmsTransportProxyBean.startImport(CmsTransportProxyBean.java:559)
         at com.sap.cms.pcs.transport.proxy.LocalCmsTransportProxyLocalObjectImpl0.startImport(LocalCmsTransportProxyLocalObjectImpl0.java:1736)
         at com.sap.cms.ui.wl.Custom1.importQueue(Custom1.java:1169)
         at com.sap.cms.ui.wl.wdp.InternalCustom1.importQueue(InternalCustom1.java:2162)
         at com.sap.cms.ui.wl.Worklist.onActionImportQueue(Worklist.java:880)
         at com.sap.cms.ui.wl.wdp.InternalWorklist.wdInvokeEventHandler(InternalWorklist.java:2338)
         at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
         at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:422)
         at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:133)
         at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:344)
         at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
         at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:298)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:705)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:659)
         at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:227)
         at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:150)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:56)
         at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:47)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
         at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
         at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
         at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
         at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
         at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
         at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2009-10-14 02:16:28.0296 +5:00

  • How to add aditional TAB in transport studio of CMS !!!

    Hi,
    Query 1:
    If we define runtime system configurations  for Dev, Consolidation (QA system), test and production in landscape configurator of CMS, same appears as TABs in transport studio of CMS.
    Also sequence will be Dev than consolidation than Test and finally production system TAB.
    I want to add one more TAB in transport studio of CMS that correspond to my traing portal server, so that I can import all my changes which has been moved to production into my training server, also I want this additional TRAING SERVER TAB to appear after production TAB in transport studio of CMS.
    How i can achieve this ??
    Query 2:
    If i want to bring test server TAB after production TAB in transport studio of CMS , how I can do this ? generally Test system TAB comes before production server TAb, I want Test system TAB to come after production TAB? How to do this ??

    Have a look at this blog.
    /people/marion.schlotte/blog/2006/03/30/best-practices-for-nwdi-track-design-for-ongoing-development
    Additionally search for 'track connection'.
    The idea is to create a new track in to which all your production code from the first track can be transported.
    Regards, Marcel.

  • [Urgent]importing error on Consilidation stage on transport studio

    Hi all
    object from IR in using CMS was transfered to Production successfully, but when i export configuration object from ID, it was sent to CMS successfully, and i can see it on consolidation tab on transport studio as waiting for import.
    when i tried to import it. i got "import failed"
    anybody help me?
    error log is below;
    Software Component sap.com/SAP-INTDIR
    Version CMS_ID.KKXI_D.8
    Label Export list-Myscenario2
    System ID.KKXI-Consolidation
    Step Repository-import
    Log D:\usr\sap\JTrans/CMS/log/ID.KKXI_C@CMS/[email protected]
    Info:Starting Step Repository-import at 2006-01-19 17:31:52.0328 +9:00
    Info:Component:sap.com/SAP-INTDIR
    Info:Version  :CMS_ID.KKXI_D.8
    Info:1. PR is of type TCSChangeRequest
    Info:export and import XI are different: http://xid.kk.net:50000/dir -> http://xip.kk.net:50000/dir
    Info:reading of XI06f7b49088c611dac604001018006446.cl for xichangelist 06f7b49088c611dac604001018006446
    Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: XiTransportException received:
    ClientServerException exception:Internal error: Unable to transfer changes for object Service  | XIP to change list "XI 3.0 Import"
    Message was edited by: David

    ClientServerException exception:Internal error: Unable to transfer changes for object Service  | WSD to change list "XI 3.0 Import" (db8254c0-6ab8-11db-a90b-0017084cb84a) since object still in change list "XI 3.0 Import" (e9f6b680-67d0-11db-9a1c-0017084cb84a)
    I think it's same error.
    I didn't find open object in change list.
    Dose anyone know a solution of that.
    Please help me.
    sskim
    Message was edited by: SangSu Kim

  • Immport Failed in Transport studio

    Hi experts,
    While importing the SAP-JEE.sca, SAP_BUILDT.sca and SAP_JTECHS.sca files in transport studio in CMS I am getting the following error whn importing SAP-JEE.sca file itself.
    Info:no changes on the CBS request queue (ZES_Test_D) after a waiting time of 14430000 ms
    Fatal:The request queue is not processed by the CBS during the given time intervall => TCS cannot import the request because queue is not empty
    Fatal:Please look after the operational status of the CBS.
    Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: The request queue is not processed during the given time intervall. Please look after the operational status of the CBS.:communication error: The request queue is not processed during the given time intervall. Please look after the operational status of the CBS.
    com.sap.cms.tcs.client.CBSCommunicator.importRequest(CBSCommunicator.java:370)
         at com.sap.cms.tcs.core.CbsMakeTask.processMake(CbsMakeTask.java:120)
         at com.sap.cms.tcs.core.CbsMakeTask.process(CbsMakeTask.java:347)
         at com.sap.cms.tcs.process.ProcessStep.processStep(ProcessStep.java:77)
         at com.sap.cms.tcs.process.ProcessStarter.process(ProcessStarter.java:197)
         at com.sap.cms.tcs.core.TCSManager.importPropagationRequests(TCSManager.java:376)
         at com.sap.cms.pcs.transport.importazione.ImportManager.importazione(ImportManager.java:227)
         at
    Give me your suggestions
    Regards
    Harshavardhan

    Hello Harshavardhan
    Please check the following;
    -the engine is running and that CBS is running.
    -idlestart is set to false.
    -Can you please log on to the CBS Web UI (Component Build service link
    on top of the CMS UI page) and do a search for requests (requests tab
    in the CBS UI) in the buildspace. Do check and
    let us know whether there are any requests that are queued or failed.
    As you see in the error log the TCS cannot import the request
    because queue is not empty and can be caused for any problem in
    previous request.
    Thanks
    Kenny

Maybe you are looking for

  • Log and Transfer - XDCam to Pro-Res

    Does anyone know a way to transfer XDCam footage directly to Apple Pro-Res using Log and Transfer? Thanks, M

  • IPhone 4S video sound not working.

    Hey, My iPhone 4S won't play back sound when a video has been recorded, it makes a weird fuzzy noise. However it works fine during calls and people can hear me, just not on the videos. Are there any solutions or do I need to get it fixed in store?

  • (little) bug in apex : for the apex team

    Hi, I have two applications in one workspace, both having some LOV´s. If I show from shared components the LOV´s of the first application it return several LOV´s If I do the same for the second application (having a smaller number of LOV´s) the reset

  • How do I retrieve payed for ringtones

    I have a few ringtones that I have bought that I can't see on my iTunes account. I only use my iphone 5s for all internet needs. How do I retrieve payed for ringtones, it is not like songs , I've got all of those back.

  • Use of  TYPE  LINE OF

    Hi , Can any one please tell me what is the use of DATA var  TYPE  LINE  OF  type. Here what is the meaning of  " LINE OF " in this declaration statement.. Thanks Ambili B