A Installation error:gcc-3.2 package
When I install Oracle 10gR2 on a OEL4.6 system. It shows a error massage:"checking for gcc-3.2; Nt found check failed. Then I download the gcc-3.2 package and try to install it:
[root@localhost src]# CC=/usr/lib/gcc-lib
[root@localhost src]# export CC
[oracle@localhost src]$ ./configure
Configuring for a i686-pc-linux-gnu host.
Created "Makefile" in /home/oracle/gcc-3.2/src using "mt-frag"
/tmp/cNf22669/cNf22669.pos: line 7: /usr/libexec/gcc: is a directory
*** The command '/usr/libexec/gcc -o conftest -g conftest.c' failed.
*** You must set the environment variable CC to a working compiler.
How should I set the CC environment?
* You must set the environment variable CC to a working compiler.
How should I set the CC environment?Why not try to set it according to the hint the configure command gave you?
It suggests you set CC to point to a working compiler. And I'm pretty sure you have a gcc working somewhere on your computer. (Hint - use 'man which')
Similar Messages
-
Adobe Reader 9, Installer error 1635
Hi, I have a problem updating Adobe Reader 9.4.2. to version 9.4.3
Direct after starting the update I receive the installer error:
"1635 This patch package could not be opened. Verify that the patch package exists and that you can access it, or contact the application vendor to verify that this is a valid Windows Installer patch package."
I have tried this MS fix (MicrosoftFixit50123.msi) but it did not help.
http://support.microsoft.com/kb/971187/en
I must say that a few days ago I also had an issue updating Adobe FlashPlayer. It would tell me at boot there was an update available, and after giving it the OK it started downloading, and installing, but although the installing gave no errors at all, both the FlashPlayers for Internet Explorer and Firefox were NOT updated, and only after a lot of these 'fake' updates I noticed it because a following update for Firefox told me my FlashPlayer was out of date while I saw FlashPlayer update that same morning.
Downloading and un-installing/re-installing both FlashPlayers did the trick... But now, a few days later another Adobe product has a problem updating.
I have not yet re-installed the reader, but since I have seen it work for 4 years, and since it MAY be related to Adobe Flash, I would like to see if someone can shine some light on this issue first.
I work with Windows XP Prof completely updated ( except... Adobe Reader).
Thanks.
Edit:
Meanwhile i have tried to uninstall Adobe Reader, but the same error persist.As far as I can see the problem is solved.
You gave me the tip for the Windows Cleanup Utility, but the support for the program has stopped because some removals did damage to other installs. So I had some second thoughts about it.
But your idea brought me another, to use the Revo Uninstaller.
http://www.revouninstaller.com/
* Made a system restore point
* Downloaded Revo uninstaller Pro 30 day trial, but full version.
* Run Revo ( ! Adobe Reader 9 had 664 registry keys with 902 values...)
* Needed a reboot to remove last files from the Adobe reader 9.
* Roughly checked if other Adobe products still run...
* Downloaded and installed Adobe Reader X ( ? X ? It is version 10.0.1 after updating)
* Did an update of Reader X
* Needed reboot after update.
Ankit_Jain, the link you gave for the Reader 9 download is an US version, but I needed a Dutch (NL) version. That's why I searched for the Reader on the Adobe site, but came on the Reader X page. I thought the X stands for 'the latest version'. But it is not.
So I have a functioning reader back, with one difference: it is not Reader 9, but Reader X . I really don't know what the difference is, but what I do know is that the install takes quite a long time, and, if you don't uncheck the box on the site for the (free) McAfee scanner, it will also install that.
I will try what I have for now, and if I may find other problems around it I will surely report back.
Thanks all for your reactions -
Getting below mentioned error while installing a package in the windows 2012 server remotely through psexec command
Error 1718. Windows Installer Service could not be accessed.
The same msi is getting installed local in through when we are doing through manually
Please help on the sameHi Rahulan,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
Just addition, please refer to following threads and check if can help you.
The Windows Installer Service could not be accessed.
error 1719 windows installer service could not be accessed ....
Hope this helps.
Best regards,
Justin Gu -
why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Mac OS 10.7.4, updating new version Microsoft Office 14.2.7, ERROR "The Installer can’t open the package. There may be a problem with file ownership or permissions."
The Apple Installer version is Version 5.0.1 (537).
When I check the Installer Log, I find only these two messages that I do not understand.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Install's runner tool is not properly configured as a setuid tool.
Jul 12 09:29:13 Bruces-MacBook-Pro Installer[423]: Unable to create InstallController
I changed all the permissions for all the Microsoft Office Folder users to Read and Write.
Restart, same errorSee:
https://discussions.apple.com/thread/1948155?threadID=1948155&tstart=1
I had identical Installer Log failure notices: I used Houdini to view the invisible files and per Limnos' suggestion cautiously dragged
user > library > preferences > com.apple.installer.plist out of that folder onto my desktop and double-clicked on the .pkg file again and it opened and installed properly.
My Installer now works properly on all .pkg files. -
Error at the installation of the CR Runtime package V13.01/V13.02 - reg key
Hello,
we got an error at the installation of the cr runtime package. We have try both
installation packages(msi) 13.01 and 13.02. But it's the same error.
We want to install this package automaticly on our computers. On 8 of 10 computers was the instalation successfully.
On the remaining 2 computers we got the following error.
MSI (s) (68:9C) [16:30:41:790]: Product: SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0
Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel. <<--- see below
Executing op: RegAddValue(Name=svcmgr,Value=0,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\templates,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatepath,Value=C:\Programme\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\Crystal Reports 2011\/Templates,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatesearchmask,Value=*.rpt,)
MSI (s) (68:9C) [16:30:41:775]: Executing op: RegAddValue(Name=templatefileextension,Value=rpt,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\DatabaseOptions,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegAddValue(Name=MergeConnectionProperties,Value=no,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegOpenKey(Root=-2147483646,Key=SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports,,BinaryType=0,)
MSI (s) (68:9C) [16:30:41:790]: Executing op: RegAddValue(Name=CommonFiles,Value=C:\Programme\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86\,)
MSI (s) (68:9C) [16:30:41:790]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports 3: 87
MSI (s) (68:9C) [16:30:41:790]: Product: SAP Crystal Reports runtime engine for .NET Framework 4 (32-bit) -- Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel.
Error 1402. Could not open key: HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\\Crystal Reports. System error 87. Verify that you have sufficient access to that key, or contact your support personnel.
MSI (s) (68:9C) [16:30:41:790]: User policy value 'DisableRollback' is 0
Our it team have an idea. They think that the problem is the double \ at the end of the reg key path. You can find this if you search
in the code above.
Can you check this or have you an other idea to solve the problem.
best regards
Dennis Hoyer
- IT consultant (.net development)Hi,
See if below article helps,
[1535811 - Error 1402 when installing Crystal Reports for Visual Studio 2010 runtime via the msi file |http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533333335333833313331%7D.do]
- Bhushan. -
why did I get an error message; installer: Package name is Adobe reader XI (11.0.10) installer: Certificate used to sign package is not trusted. Use -allowUntrusted to override?
Hi sgtwalker1226,
For Which operating system are you downloading the installer?
Regards,
Rahul -
Some package installation error during zone installation steps.....
hi,
i am totally new to this technology.
i had created 3 Zone's on X86 Sun Fire X4270 M2 Hardware (OS - Solaris 10 update 9)
& during OS Installation i had selected Software installations using the Entire Distribution.
every thing worked fine but during zone installation steps, got some package installation error (refer the below output)
bash-3.00# zoneadm -z OFSMU-PWM-zone1 install
Preparing to install zone <OFSMU-PWM-zone1>.
Creating list of files to copy from the global zone.
Copying <158400> files to the zone.
Initializing zone product registry.
Determining zone package initialization order.
Preparing to initialize <1240> packages on the zone.
Initialized <1240> packages on zone.
Zone <OFSMU-PWM-zone1> is initialized.
Installation of these packages generated errors: <SUNWpostgr-82-libs SUNWpostgr-82-devel SUNWpostgr-83-server-data-root SUNWpostgr-82-server SUNWpostgr-82-contrib SUNWpostgr-82-client SUNWpostgr-82-server-data-root>
The file </zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log> contains a log of the zone installation.
i checked the log file "/zone/OFSMU-PWM-zone1/root/var/sadm/system/logs/install_log"
its show below error's
*** package <SUNWpostgr-82-libs> failed to install with fatal errors:
*** package <SUNWpostgr-82-devel> failed to install with fatal errors:
need your help my friends..
thanks in advance....
Edited by: Raja Kondar on Dec 9, 2010 11:59 AMhi DR,
thnks for reply..
but i can see that "postgres" already exist in the system as user &l group.
postgres:x:90:90:PostgreSQL Reserved UID:/:/usr/bin/pfksh
also the failed packages duirng zone creation steps are already installed in the global zone..
is thr any other way to resolve this issue....
Edited by: Raja Kondar on Dec 16, 2010 11:00 AM -
Installation error in invoking target 'agent nmhs'
Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size 1336624 bytes
Variable Size 922749648 bytes
Database Buffers 553648128 bytes
Redo Buffers 12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-KhaffafHi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13. -
Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR
I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4 and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
deniseHi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
Downloaded latest version onto desktop. Will not complete install.Many thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows -
Windows 7 Production Premium CS4 language pack installation error + solution
Ok. Long story short...(For solution scroll all the way down)
Tried to install ubuntu next to my windows vista. Next day I found myself wondering in store searching for windows 7 because Ubuntu install ruined something somewhere inside my computer and neither one of my OS were not starting at all...
Ok. So I purchased Windows 7 with smile in my face and happiness in my soul! Now it´s clean installed and working and I have to say it is much better than Vista was...
Already installed 3d max 2009 and couple of other old programs and works like charm and softwares are starting fast!
...BUT
Today I tried to install my wonderful CS4 Production Premium package to this computer. All went well all the way to the end report where it said something like "installation error" and then there was few products or files on the list which it was unable to install...(I can post the exact list tomorrow when I try to uninstall and then again install suite the fourth or fifth time in a row.) After error report I was really worried. First I tried to start Photoshop and all I got was error report "some of the application components are missing from the application directory. Please re-install the application." Then I tried Illustrator and the message was "the localized resource files for this application could not be loaded. Please re-install...blah blah..." When I try to open Onlocation I get windows error "Adobe Onlocation has stopped working." Bridge and Media Encoder are working! But when tried to start After Effects, Premiere and Soundbooth it just opened the serial key window. When I write the serial from my dvd-box backlabel it gives me the nice big red X and says that my serial is not valid. But my serial was really valid just a while ago when I started to install these softwares! Oh please NO!
Ok. So...Questions shortly:
How to get my Production Premium installation work in Windows 7 and get back to work?
How to de-activate my softwares after computer breakdown or user stupidity leading to computer breakdown so I can use my softwares again?
EDIT:
Well...This is what I got from the error report:
Adobe After Effects CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Encore CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Flash CS4 Extension - Flash Lite LangPack Common
Error:
Error 2.
Adobe Flash CS4 Payload LangPack (en_GB)
Error:
Error 2.
Adobe Illustrator CS4 LangPack (en_GB)
Error:
Error 2.
Adobe OnLocation CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack
Error:
Error 2.
Adobe Photoshop CS4 International English Language Pack_x64
Error:
Error 2.
Adobe Premiere Pro CS4 LangPack (en_GB)
Error:
Error 2.
Adobe Soundbooth CS4 LangPack (en_GB)
Error:
Error 2.
LangPack (British) for DeviceCentral
Error:
Error 2.
Tried installing different language but it still won´t work...
Can´t install it in safe mode and installing trough troubleshooters different windows versions won´t work either...
Any ideas anyone?
EDIT:
Tried creating .nrg dvd-images with Nero and installing from harddrive instead of dvd-discs but still no luck. So problem is not in my dvd-drive or discs...
EDIT:
SOLUTION...
Adobe support answered to my question. I was missing a DOCUMENTS folder from my USERS - PUBLIC path and after I created that and un-installed & installed my production premium package, everything worked like it should! You might encounter to this same problem also if your USERS - PUBLIC - DOCUMENTS folder has some security settings on... Just right click the folder, choose security and check full control in permissions and remember to sign in as administrator when you install any software...
Hope this tip is helpful!
Now...Back to work!WOH, just what I needed.
My problem was, that I have moved my documents to another partition, but the public parts I unfortunaly don't had thinked about. . This was 'the solution'! Thank you J_Suhonen! -
Installation Error SAP NW CE 7.1 Java on Windows 2003 SP2
Hi folks,
I am getting an installation Error when trzing to install the Preview Version of CE7.1
Installation will terminate in Step 28 of 34 with the Message
PerfTimes : loadNativeLayer: loading jperflib failed. no jperflib in java.library.path
Anz Ideas how to terminate the Installation_
Best Regards
ChrisHi,
I solved the issue bye updating jvm manually. Both jspm and update manager didn't update successfully.
Thanl you for your support.
Resolution (to support adobe document services for my specific instalaltion)
Check JVM version in Netweaver u2013 open file
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf. See SAP JVM version
(e.g. sapjvm version: 5.1.055)
If SAP JVM version is earlier than 5.1.0.55 apply the patch from SAP Note 1469491:
1) Download patched JVM from the link provided in SAP Note 1469491 for
required platform
2) Unpack downloaded SAR archive using Netweaver SAPCAR tool
3) Check JVM version and platform in file sapjvmmanifest.mf. E.g.
sapjvm os: NTintel
sapjvm version: 5.1.055
u201Csapjvm osu201D should be the same as in the installed NW JVM u2013 see file
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvmmanifest.mf
4) Stop Netweaver services
5) Substitute Netweaver JVM folders
c:\usr\sap\<NWinstance>\<NWnumber>\exe\sapjvm_5 and
c:\usr\sap\<NWinstance>\SYS\exe\jvm\NTI386\sapjvm_5.1.0xx by SAP JVM
from the patch package
6) Start Netweaver services -
ECC v6.0 installation error : CJS-30022 and FCO-00011
Hi All,
I enconter the while <u><b>installing ECC 6.0 in windows 2003 server and MSSQL 2005 as the database</b></u>. The error occurs during <u><b>import ABAP phase ( exactly the Job name was SAPSDIC and this is the first job out of 19)</b></u>
The same issue has been discussed in this forum but for oracle( Please find the link below for it)Kindly let me know how to fix it and since the database i am using it is SQL 2005 i am really confused on <u><b>what should i change exactly</b></u>.
Re: Solution Manager v4.0 installation error : CJS-30022 and FCO-00011
regards,
Anandha Krishnan.RSunil,
The log file is pasted.
===== Log file of import.monitor.log =============
TRACE: 2007-04-18 18:45:15 com.sap.inst.migmon.LoadTask processPackage
Task file generation for 'SAPSDIC' import package:
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -ctf I "E:\SAP ERP 2005 IDES\51032413_4_IDES SAP ERP 2005 SR2 Inst. Export\EXP4\DATA\SAPSDIC.STR" "C:\Program Files\sapinst_instdir\ERP\SYSTEM\MSS\CENTRAL\AS\DDLMSS.TPL" SAPSDIC.TSK MSS -l SAPSDIC.log
TRACE: 2007-04-18 18:45:15 com.sap.inst.migmon.LoadTask processPackage
Loading of 'SAPSDIC' import package into database:
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast
ERROR: 2007-04-18 19:00:34 com.sap.inst.migmon.LoadTask run
Loading of 'SAPSDIC' import package is interrupted with R3load error.
Process 'E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe -i SAPSDIC.cmd -dbcodepage 1100 -l SAPSDIC.log -loadprocedure fast' exited with return code 2.
For mode details see 'SAPSDIC.log' file.
Standard error output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
WARNING: 2007-04-18 19:01:00
Cannot continue import because not all import packages with data conversion tables are loaded successfully.
WARNING: 2007-04-18 19:01:00
1 error(s) during processing of packages.
INFO: 2007-04-18 19:01:00
Import Monitor is stopped.
===== Log file of import.monitor.java.log =============
java version "1.4.2_09"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_09-b05)
Java HotSpot(TM) Client VM (build 1.4.2_09-b05, mixed mode)
Import Monitor jobs: running 1, waiting 18, completed 0, failed 0, total 19.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 18, completed 0, failed 1, total 19.
===== Log file of SAPSDIC.TSK =============
T F4TMP C ok
P F4TMP~0 C ok
D F4TMP I ok
T F4UHLP C ok
P F4UHLP~0 C ok
D F4UHLP I err
Note : Other than the last task all the other tasks were found to be ok
===== Log file of SAPSDIC.log =============
(DB) INFO: ENHA_TMDIR~CMP created
(DB) INFO: ENHA_TMDIR~ENH created
(DB) INFO: ENHA_TMDIR~MTD created
(DB) INFO: F4TMP created
(DB) INFO: F4TMP~0 created
(IMP) INFO: import of F4TMP completed (1404 rows) #20070418185312
(DB) INFO: F4UHLP created
(DB) INFO: F4UHLP~0 created
(CNV) WARNING: code page conversion problem
Number of substitutions: 5
(row 3322 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 22 04 3e 04 47 04 3a 04 38 04 20 00 20 00 20 00 |".>.G.:.8. . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 9
(row 3323 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 23 04 41 04 3a 04 3e 04 40 04 35 04 3d 04 38 04 |#.A.:.>[email protected].=.8.|
VALUE 35 04 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |5. . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 4
(row 3324 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 26 04 38 04 3a 04 3b 04 20 00 20 00 20 00 20 00 |&.8.:.;. . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 7
(row 3325 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 27 04 30 04 41 04 42 04 3e 04 42 04 30 04 20 00 |'.0.A.B.>.B.0. .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 13
(row 3326 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 15 04 3c 04 |-.;.5.:.B.@...<.|
VALUE 3a 04 3e 04 41 04 42 04 4c 04 20 00 20 00 20 00 |:.>.A.B.L. . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 19
(row 3327 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 21 04 3e 04 |-.;.5.:.B.@.!.>.|
VALUE 3f 04 40 04 3e 04 42 04 38 04 32 04 3b 04 35 04 |?.@.>.B.8.2.;.5.|
VALUE 3d 04 38 04 35 04 20 00 20 00 20 00 20 00 20 00 |=.8.5. . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 18
(row 3328 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 38 04 47 04 |-.;.5.:[email protected].|
VALUE 1d 04 30 04 3f 04 40 04 4f 04 36 04 35 04 3d 04 |[email protected].=.|
VALUE 38 04 35 04 20 00 20 00 20 00 20 00 20 00 20 00 |8.5. . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 16
(row 3329 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3b 04 35 04 3a 04 42 04 40 04 38 04 47 04 |-.;.5.:[email protected].|
VALUE 35 04 41 04 3a 04 38 04 39 04 20 00 42 04 3e 04 |5.A.:.8.9. .B.>.|
VALUE 3a 04 20 00 20 00 20 00 20 00 20 00 20 00 20 00 |:. . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(CNV) WARNING: code page conversion problem
Number of substitutions: 7
(row 3330 of current buffer, table F4UHLP)
MANDT 38 00 30 00 30 00 |8.0.0. |
USERNAME 5a 00 48 00 55 00 4b 00 4f 00 56 00 20 00 20 00 |Z.H.U.K.O.V. . .|
USERNAME 20 00 20 00 20 00 20 00 | . . . . |
TABFIELD 54 00 30 00 30 00 36 00 54 00 20 00 20 00 20 00 |T.0.0.6.T. . . .|
TABFIELD 20 00 20 00 | . . |
FIELDFIELD 54 00 58 00 44 00 49 00 4d 00 20 00 20 00 20 00 |T.X.D.I.M. . . .|
FIELDFIELD 20 00 20 00 | . . |
VALUE 2d 04 3d 04 35 04 40 04 33 04 38 04 4f 04 20 00 |[email protected]. .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
VALUE 20 00 20 00 20 00 20 00 20 00 20 00 20 00 20 00 | . . . . . . . .|
(IMP) INFO: ExeFastLoad failed with <2: BCP Commit failed>
(IMP) ERROR: ExeFastload: rc = 2
(DB) INFO: F4UHLP~1 created
(DB) INFO: GCTAB created
(DB) INFO: GCTAB~0 created
(IMP) INFO: import of GCTAB completed (0 rows) #20070418185312
(DB) INFO: GUI_FKEY created
(DB) INFO: GUI_FKEY~0 created
(IMP) INFO: import of GUI_FKEY completed (335 rows) #20070418185312
(DB) INFO: VRSX4~1 created
(DB) INFO: disconnected from DB
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe: job finished with 1 error(s)
E:\usr\sap\KR3\SYS\exe\nuc\NTI386\R3load.exe: END OF LOG: 20070418190034
regards,
Anandha Krishnan.R -
TS3212 Unable to instal Itunes in Windows 7 for want of a DLL file / installer error
Can anyone help me in installing the latest itunes. I have downloaded the setup file. When I try to instal, installation fails forwant of a DLL file / error in installer package. What should I do to successfully instal.
I have been using Itunes for so many years. But recently I formatted my laptop and installed the new OS, Windows 7. Previously I was using Windows XP, I did not have problem.
Is there any solution by enabling or disabling any of the service features under administrative tools in the control panel ?Although you're getting a different error message, try the procedure from the following user tip with that one:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems
Maybe you are looking for
-
Leopard Graphics Extensions Issues (ALWAYS WITH THE GRAPHICS!)
I'm perfectly new to this support for the purposes of this problem. The problem that has recently popped up is when ever I log in I'm greeted with two messages about "AppleIntelGMAX3100.kext" and "AppleIntelGMAX3100FB.kext" not being installed proper
-
Hello, I need to set some custom HTTP Header when i send the SOAP message to an endpoint. I tried this..but doesn't solve my requirement. SOAPMessage soapmsg = messageFactory.createMessage(); MimeHeaders mime = soapmsg.getMimeHeaders(); mime.addHeade
-
Dear PP GURUs, I have a problem with Sales Order stock in MTO (Make to Order) Prob : I have one FG (FG-001) with MTO, and One more FG (FG-002) with MTS One Raw Material (RM-001) common for the both FG's. Due to some reasons, Some
-
Tried several times and no luck. Anybody having this same problem out there? Never had this problem before. Looking for any possible solutions. Thanks.
-
Hotmail (only) now opens in a window not a tab
As of yesterday - with NO downloads or updates to anything having been made - MSN.com opens Hotmail (when I click the link from that page) in a new window, not a tab. Any link in any email, however, opens in a new tab in the original window. When I o