A issue about library of report painter?

why can't i put table vbap into a library?
It informs that "The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables. This is not the case for table VBAP." and Message no is GR493.

Any body here can help me? thanx!

Similar Messages

  • Library in Report painter

    Dear All,
       Can any one tell me what exatly determines the library in report painter otherthan pre-defined coloumns and Rows, and i still have a confusion in choosing library, Pls throw some light to eliminate confusion..
    Regards,
    Suresh Patipati.

    Hi
    Library determines the following in report painter report:
    Table that can be used in the report
    Charaterstics that can be used in the report
    Key Figures that can be used in the report
    Basic Key Figures that can be used in the report
    Regards
    Sandesh.

  • Attaching Variable to the Library for Report Painter for Cost center report

    Hi,
    I want to attach the Variable - "Cost element group" to the Library for Report Painter for getting Cost center report. The Cost center report should be cost element group wise with actaul, budget and variance. Please let me know the process.

    hi..
      I think you have to first define Attribute mis as "V" in Cost element master basic data tab for the elements you want to capture as varible.
      Then make a Cost element group / set in KAH1/GS01 and use it in your report.
      kkumar

  • Add in Library for Report Painter/Writer 9PCC

    Hi SAP,
    I need to include in Library for Report Painter/Writer the component 9A2 CO-OM-IS-BP Business processes: Special reports because I need to run 9PCC, but 9PCC don't exist in my system.
    Would I like know if it exist the SAP note include in Library?
    Best regards,
    Edited by: Fabio Gil on Jul 1, 2010 6:35 PM

    Hi,
    You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
    You can search for available info on the forum; similar questions were already asked.
    Regards,
    Eli

  • Question about sets in report painter.

    Hi, everybody. Please, could someone help me in this matter?.
    I wanna delete a set with the GS04 transaction in Report Painter but I cannot.
    When I put the set's id (XXX) in the set's name and push Delete-Set-F8 button, I get the following error:
    The XXX set cannot be deleted.I consult the error with the help and SAP tells me that  I need to use the set-usage option to view where the set is used in the system.
    I select this set-usage option under the utilities menu and SAP tells me that the set is being used in a report.
    The thing is that the report doesnt exist. I deleted the report before. Why the error is then.
    However, I created, generated and compiled the report again in report painter with other different set so that I confirmed that the report was not using the XXX set  and the error continues with report or without it.
    That I tried to say was that the XXX set is not being used anywhere and the question then is why report painter is telling me that the set is being used in a report. Thing that is not true.
    Thanks and I hope someone can help me out!!

    Hi, everybody. Please, could someone help me in this matter?.
    I wanna delete a set with the GS04 transaction in Report Painter but I cannot.
    When I put the set's id (XXX) in the set's name and push Delete-Set-F8 button, I get the following error:
    The XXX set cannot be deleted.I consult the error with the help and SAP tells me that  I need to use the set-usage option to view where the set is used in the system.
    I select this set-usage option under the utilities menu and SAP tells me that the set is being used in a report.
    The thing is that the report doesnt exist. I deleted the report before. Why the error is then.
    However, I created, generated and compiled the report again in report painter with other different set so that I confirmed that the report was not using the XXX set  and the error continues with report or without it.
    That I tried to say was that the XXX set is not being used anywhere and the question then is why report painter is telling me that the set is being used in a report. Thing that is not true.
    Thanks and I hope someone can help me out!!

  • Add Period library 8A Report Painter

    I need to add 13 to 16 periods for the library 8A (EC-PCA) but only allows me to add the periods of 1 to 12. this change is possible?
    Regards,
    Ricardo.

    hi,
    first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
    FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
    Pls Suggest

  • New Library for Report Painter/Writer

    I need a library that includes 2 tables.  I know that somehow it is possible, but it is quite technical while very few people know how to do it.
    Does anybody can guide me through the process?

    Hi,
    You can create a library via GR21 transaction. What tables do you want to join? Depending on this, one can tell whether it's possible or not.
    You can search for available info on the forum; similar questions were already asked.
    Regards,
    Eli

  • Creation of Library and Report in Report Painter with Z tables.

    HI,
    When I am creating library in report painter with Z table it is giving the following error message 'Table ZCO_SEMI_FIN_VAL is not installed in Report Writer'.
    Can u help me how u install Z table in report painter and create the characteristic and key figure of the Z table in the library.
    Regards,
    Partha B

    Hi Partha Pratim Bhar,
    In order to bring / enable a Z table for you to build a library, you will have to set it at transaction GRCT.
    Here you need to configure - table (Z table) , characteristics and Key figures.
    You can refer any other tables by SAP in GRCT for reference.
    Revert if you require additional help.
    Regards,
    Subin John

  • Attachin Custom Table to Report Painter Library

    Hi,
    Im trying to create a new library in Report Painter (GR21) and attach it to a custom table.
    I am getting the error message (GR493)  that "the table is not installed in Report Writer - The Report Writer can only report on tables if the attributes of these tables that are relevant for reporting are defined in control tables"
    Does anyone know what this means and how to get around it?
    Thanks.

    Hi,
    You need to add the table as a report table in transaction GRCT "Report writer control tables".
    Hope it helps!
    Regards Rene

  • Budget and Report Painter

    HI Everyone and Consultants,
    Well i am at abaper and dont have much knowledge in finance controling.
    First issue:
    Currently we update our budget using the t.code KPA6 using Profit Center and Cost element.
    It is succesfully getting update at KPA7.
    But why GLPCT table is not getting update?? Any idea ?
    Second Issue :
    I am working Report painter for the KPA6 with the Profit Center.
    In the t.code GR21 i am creating a library with name ZF2 and table GLPCT but the table does not having the
    value which is been update at the KPA6.
    Any idea anyone ? For you information recently some consultants did internal order configuration for the company.
    Can this config give any problem for the KPA6.
    Thanks in advanced.

    HI Eli.
    I have spoken to my Fi/CO consultant and he had told me the integration is done.
    But it is still not updating in the GLPCT.
    As per my knowledge kpa6 is getting update at the COSP table and due to this i am unable to complete my report painter.
    Is it possible for you to give any basic idea or t.code to integrate.
    Hope you can really help me.
    Thank you very much in advanced.
    regards,
    mrsaravannan

  • KPA6 and report painter

    HI Everyone and Consultants,
    Well i am at abaper and dont have much knowledge in finance controling.
    First issue:
    Currently we update our budget using the t.code KPA6 using Profit Center and Cost element.
    It is succesfully getting update at KPA7.
    But why GLPCT table is not getting update?? Any idea ?
    Second Issue :
    I am working Report painter for the KPA6 with the Profit Center.
    In the t.code GR21 i am creating a library with name ZF2 and table GLPCT but the table does not having the
    value which is been update at the KPA6.
    Any idea anyone ? For you information recently some consultants did internal order configuration for the company.
    Can this config give any problem for the KPA6.
    Thanks in advanced.
    Cross-post

    Hi Priya,
    Here are some salient features:
    1) Report Painter has 90% of the functionality that Report Writer has and is easier to develop.
    2) The last time I did anything on it, from the SAP main menu, choose Information systems->Ad hoc reports->Report painter.
    3) Report Writer functions can be accessed from within the Report Painter.
    4) Report Painter/Report Writer has four main components: Sets, Libraries, Reports, Report Groups
    5) The main difference between the two RW and RP is the graphical user interface of the Report Painter.
    6) It is generally used in FI-SL reporting.
    For more information, please check this links.
    For Report Painter
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7d2543c211d182b30000e829fbfe/content.htm
    For Report Writer
    http://help.sap.com/saphelp_47x200/helpdata/en/66/bc7dc143c211d182b30000e829fbfe/content.htm
    Hope this will help.
    Regards,
    Ferry Lianto

  • Report Painter: Add a column

    Hi Gurus,
    I would like to add a column to my report. Any ideas as to how to go about it in Report Painter ?
    Regards

    Hi,
    Go to the report (GRR2) and add the column. Please, try to explain your problem/issue in more constructive way; otherwise, it would be impossible to give a proper answer.
    Regards,
    Eli

  • Issues with BI publisher report in dashboard

    Hello all,
    I got some issues about BI publisher reports in a dashboard.
    I use a dashboard prompt in combination with a BIP report.
    1.) I don't want to see the publisher control bar in my dashboard. Now you can't view the report anymore after using the dashboard prompt. Because it says you have to press the view button which is on the publisher control bar.
    So when I add the bar. Then I have first to press on go in the dashboard prompt and after that I have to press on view in the publisher control bar.
    2.) When I open my dashboard I see a scroll bar in my BIP report. Now when I use the dashboard prompt, it disappears. So I can't view the entire report anymore
    3.) I like to develop in english, but the test must be in dutch. Now I have a english dashboard with a dutch control bar. Also logging in to BIP in english and then navigating to analytics will not help.
    4.) I can't use I-bots on BI publisher reports, or can I?
    5.) This is not really an issue, but more like a problem but I want that users can view the BIP report on the dashboard only in HTML, but I want that they only can export to excel, is this possible?
    Hoping for some answers ;)
    Thanks in advance!
    Message was edited by:
    Remc0

    Hi Venkat,
    Thanks for your quick respond.
    1.) Auto Run is enabled. And the report runs automatically as well. But then it ignores the dashboard prompt (as a regular report would do as well). But when I choose some values in the prompt and then press go. Then it says I have to press on view as well.
    2.) no that is not the case. My report is so big that it always need a scroll bar ;) also adjusting the size settings in the dashboard doesn't help. The only occurs when viewing in HTML, when previewing in excel or RTF it all just work fine.
    3.) true, but ow well this is the least importetant one ;) so if this doesn't work, than it doesn't work ;)
    4.) Ok, I will have a look on that.
    5.) I did enabled HTML and EXCEL outputs in my BIP report. But when the first point is working, then I don't want to see the control bar anymore and I want to have the output on the dashboard in HTML and then I want to build a button, or a link or something that exports the request to excel. Is that possible?

  • Report painter- problem in creating formula variable- ps

    Hi Experts,
      i have copied report  6P3 - 6PP1-001 Act/Com/Total/Plan    from library in report painter.
    our requirement is we want two user fields from cj20n  in this report. they are prps-usr04
    and prps-usr05.
    i have added these in header as  special text variable as they were ALREADY available at header under
    MASTER DATA FOR PROJECTS / WBS ELEMENT IN REPORT-WRITER. 
    now my requirement is to add new columns. for that i required these two fields in formula.
    but as they are not present in formula component  i am not able to get it.
    what should i do to enter these fields in component list in formula?
    PLEASE GUIDE ME?
    AMOL

    ActRunningBal is a running total calculated in crystal or database field? If it is a database field then you can try this
    if {command.CR-Amount} <>0 then
    {command.CR-Amount}
    else
    previuous()+previous({command.Dr-Amount})
    If it is a running total you cannot apply previous function on it.
    Regards,
    Raghavendra

  • Report Painter: FAGLFLEXT, profit-center authorization not checked

    Hi colleagues,
    I am using a Z*-library in report painter based on FAGLFLEXT.
    When a report beads on this library is executed, there is no authorization check for profit-center (profit-center groups,…). Wether auth. Object K_PCA is checked nor an entry in RESPAREA.
    When I execute a report from FGI3 transaction (also based on FAGLFLEXT) I can see that RESPAREA is checked with PCxxxxyyyy (xxxx = comp. code, yyyy is profit-center).
    I thought that, based on the information in the IMG node “activate authorization check for profit centers” which appears if FIN_GL_CI_1 is active, that PC authorization check for reporting is ALWAYS working and I guess, in the mentioned system the authorization check was working before the last support package upgrade.
    The important text from the SAP IMG node “activate authorization check for profit centers”: “The profit center display authorization for reporting is not affected by this setting. The system always checks this authorization, be it in drilldown reporting or the Report Painter / Report Writer reports.”
    The system is ECC60 on SAPKH60023, so FIN_GL_CI_1 is not available, but I believe, the auth. check for profit-center in report painter reports should work fine without this.
    Does anybody know if in ECC60 with a report painter library using FAGLFLEXT the profit-center authorization is checked, which auth. object is checked,...?
    Best regards, Christian

    Hi,
    Please check if the below note helps.
    1960689 - Reverting authority check from "E63_AUTHORITY_CHECK" to "E14_AUTHORITY_CHECK" or use both
    Thanks

Maybe you are looking for