A JDeveloper Beginner question
Hello all,
I've just received JDeveloper + Oracle8i, and tried to test the bc4j sample located in its samples directory (the auctions sample).
While compiling the jsps.jpr component, I got the following error:
Error: (0) cannot access directory oracle\jbo\common\appmgr; verify that directory is reachable from classpath and/or sourcepath.
What is JBO and how can I install it?
Please be patient with me, as this world is really new to me :-).
Thanks,
Uri
Hi..
This #{bindings.Commit.execute} will commit whole Application module(AM).That means All altered ViewObjects in that AM will be committed.If you need to Commit a ViewObject you can do it in Application ModuleImpl.
VO.getDBTransaction().commit();
Similar Messages
-
Hello all, hopefully I have posted this to the correct LiveCycle board!
I'm new to Acrobat and LiveCycle in general. I'm working out of windows LiveCycle Designer 8.x and my question is as follows....
I'm working off of the "Quote" Form Template and what I am looking for is a way to make the rows of the Table expand as needed. I will be converting this Template into a "Purchase Order" form, and there will be many occassions where I will need to increase the table rows - perhaps onto a second or even third page - due to the volume of different items I will be seeking prices on at a given time.
Long story short I would like to take this "QUOTE" form template and make it such that if needed, I can expand the table size one row at a time, pushing the content beneath (Comments, subtotal, etc) onto the next page....
Hoping I have explained my query well enough, Could anyone provide me a solution or point me in the correct direction?
Many thanks!As a followup, so as not to clog the board with numerous threads I have another beginner question
For the sake of hypotheticals I am creating a dynamic PDF form. This pdf is a Purchase Order Form, with a table in the Body that will expand/contract as the form user needs. (EXA- Default table size is 5 items, however user is creating an order for 12 items, he/she can increase the table rows to desired capactiy.) It will be a very simple layout. All data for the form will come from manual entry, no XML data binding going on.
My new question is as follows: Is there a way I can have this user's Adobe reader or Adobe acrobat software remember previous data entries, so that if 4 weeks after ordering widget X he/she needs to place another order for widget X, the software will autofill the table as he/she types into the table cell?
This would be similar to how Excel will start to autofill if it recognizes a previously entered value from some other cell in the worksheet (workbook?)
EXA-
[NAME] [MODEL] [QTY] [PRICE]
Widget A 433 $30.00
Would it be possible for the software to notice that I'm typing the word "widget" somewhere after typing "wid" ???
Many thanks for any and all followups, I'm a teenager trying to help out in my father's small business. They are in the darkages here and I'm doing my best to self teach.
Thanks. -
Beginner question: Can I apply one formula to all cells in a column?
Hi,
I'm new to spreadsheets, so apologies for asking what is probably a very simple question.
I want to apply a formula that divides the values in one column (W) by values in another (AX) for a table containing 3000 rows, and outputs the result for each row into the appropriate cell in the new column I've created.
Numbers 09 'help' hasn't helped to this point.
Thanks in advance for any assistance.GeoBrett wrote:
Numbers 09 'help' hasn't helped to this point.
Besides Numbers '09 Help there are two other useful resources available in the Help menu: the Numbers '09 User Guide and iWork Formulas and Functions Help.
For "Beginner questions," my first choice would be the User Guide. For the specific question you asked, a quick scan of the chapter on "Using Formulas and Functions" (pp 83-96) will provide some useful information. Start in the neighborhood of page 93.
Regards,
Barry -
Beginner question regarding 32-bit mixing and mixdown workflow
Hello
I have a beginner question regarding 32-bit mixing and mixdown.
If I edit some 16Bit, 44.1kHz Stereo WAV Files and put them into multi-track view to do crossfades, how should I do the mixdown?
Audition shows me in multi-track view, that it is doing 32-Bit mixing.
Can I just mixdown to 16Bit, 44.1kHz Stereo without any dithering (as the files are 16Bit, 44.1kHz Stereo to begin with), or will I lose quality that way?
I will be performing a normalization to 96% to the mixdown and then split to tracks in Audition, as in the end I want to to have an audio CD.
I guess I could mixdown to 32Bit, then normalize and in the end save back to 16Bit, 44.1kHz Stereo WAV (with dithering, I suppose?), but I want to avoid any unnecessary converting steps.
GreetingsAny time you do any processing on a 16bit file in 16 bit only it will degrade the audio slightly due to rounding of the calculations. Working in 32 bit floating point (Audition's default) takes account of all bits generated due to processing.
So it is always best to work in 32 bit, even if your originals were 16, all the way through until the last stage of saving the files for CD burning. Any losses due to conversion will be insignificant against those due to working 16 bit. -
Beginner question - how to efficiently check if a photo is part of the selection
Dear all,
Sorry for this beginner question, however I don't know how to solve it and I'm sure that there is a quick and easy answer to this:
My target is to get all the "heads of stack" (photos with Position 1 in stacks) of the selection ("photos" below).
for i, photo in ipairs( photos ) do
local photoName = photo:getFormattedMetadata('fileName')
if photo:getRawMetadata( 'isInStackInFolder' ) then
--Photo is in a stack
local photoHeadOfStack = photo:getRawMetadata('topOfStackInFolderContainingPhoto')
local stackPos = photo:getRawMetadata( 'stackPositionInFolder' ) -- get the position in the stack
local photoHeadName = photoHeadOfStack:getFormattedMetadata('fileName')
app:logVerbose("Photo nb ^1, name ^2 is in a stack with the position ^3", i, photoName, stackPos)
if stackPos == 1 then
-- photo is master of the stack
stackTop[#stackTop+1]=photo
app:logVerbose("Photo ^1 is top of the stack ^2", photoName, #stackTop)
-- check if couple if correct
elseif photos.photoHeadOfStack then
app:logVerbose("Photo ^1 is in a stack, but not on top. Top of the stack already selected", photoName)
else
stackTop[#stackTop+1]=photoHeadOfStack
app:logVerbose("Photo ^1 is in a stack, but not on top. Top of the stack ^2 - ^3 ", photoName, #stackTop, photoHeadName)
end
end
end
In the if structure in the middle checking the Position in the stack, if the Position is not 1, I would like to check if the photo heading the stack ('photoHeadOfStack') is part of 'photos'. I tried 'elseif photos.photoHeadOfStack then' and 'elseif photos[photoHeadOfStack] then' but it doesn't work ->this elseif is never true even if 'photoHeadOfStack' is part of 'photos'.
Is there anyway to have this check done without checking "manually" photos ?(via for example a for Loop)
I'm sure that Lua proposes this, but I don't know how...
I thank you for your Support!--[[ This code creates "stackTops", an array of LrPhotos that are the
tops of all the stacks containing photos in the array
"photos". ]]
stackTopSet = {}
for _, photo in ipairs (photos) do
local stackTop = photo:getRawMetadata ("topOfStackInFolderContainingPhoto")
if stackTop ~= nil then stackTopSet [stackTop] = true end
end
stackTops = {}
for photo, _ in pairs (stackTopSet) do table.insert (stackTops, photo) end -
Beginner Question: SA520 Admin access through WAN port
Dear all,
I've a beginner question regarding my brand new SA520: How can I configure the box so that I'm able to access the admin GUI not only through the LAN ports but also from the WAN ports?
I tried already to allow inbound traffic to the firewall's internal IP address (not sure if done right, so) and granted the admin user access profile from WAN and LAN: I can access the box from the LAN but not from the WAN. Any ideas?
Thanks,
Eric
PS: Yupp, I know that it's not a good idea to expose a FW admin GUI to the WAN - but this is only a lab environmentGo to Administration -> Users.
click on the 'Edit User Policies' 'Login' button. It's there you can enable WAN access. -
Beginner question - using pre for flexibility in text?
Hi,
Apologies for the beginner question, but I am struggling to work out whether it is more sensible to use <pre> in all my texts, as it seems more flexible.
It seems that when I use <p> - paragraph - I can't use multiple space bars to align certain bits of text, but more disruptively I have gaps between text when I press Enter (I guess this defines the paragraph, but isn't always wanted).
Well, basically, <pre> seems more flexible, but it behaves strangely sometimes. What do other people use?
Many thanks!
Ivan Reshetilov
http://www.ivanreshetilov.co.ukHi Ireshe, just a beginner like you. Have never heard of <pre> tags, use <p> tags. If you hit SHIFT enter after a sentence this puts in a <br> tag or line break which basically leaves a blank line between text.
If you add &nsbp; or lots of them between words this gives you an extra space between letters. How all your paragraphs sit on the page is defined by CSS. E.g.
p {
margin:0;
padding: 5px 0 0 10px;}
This would place all text within <p> tags on your page, with a 5px gap at the top, no space to the right or bottom and 10px space to the left. Hope this helps, good luck!
Amanda
www.kimberleywebdesign.com.au -
Beginner question: Configure Tomcat for JAAS?
Hi,
This is a beginner question :-(. I'm trying to get JAAS to work on my Tomcat (6.0.12) installation. I used code from a Javaworld article (http://www.javaworld.com/javaworld/jw-09-2002/jw-0913-jaas.html)
Of course I had to configure my Tomcat to work together with JAAS. The document I used is: http://tomcat.apache.org/tomcat-6.0-doc/printer/realm-howto.html
According to the Tomcat doc I have to do the following steps before I can use JAAS to authenticate a user:
1. Develop your code. Place the compiled classes in Tomcat's classpath
2. Setup a login.config file for Java, and tell Tomcat where to find it (set JAVA_OPTS)
3. Configure the JAASRealm in your server.xml
1 Develop code: I use the following classes:
PassiveCallbackHandler.java
RdbmsCredential.java
RdbmsLoginModule.java
RdbmsPrincipal.java
These classes I put in the package rdbmsjaas.
In the %CATALINA_HOME%/webapps/Javaworld_Jaas/WEB-INF/lib directory I created the rdbmsjaas.jar file.
The jsp is called jaas.jsp, and is stored in %CATALINA_HOME%/webapps/Javaworld_Jaas
2. Setup login.config
In %CATALINA_HOME%\conf I saved the file Javaworld_all_that_Jaas.config, containing:
Example {
RdbmsLoginModule required
debug="true"
url="jdbc:mysql://localhost/jaasdb?user=javauser&password=javadude"
driver="com.mysql.jdbc.Driver";
};I created an XP Environment Variable JAVA_OPTS with the value <-DJAVA_OPTS=-Djava.security.auth.login.config==C:/Program Files/Apache Software Foundation/Tomcat 6.0/conf/JavaWorld_All_That_Jaas.config> (excluding < and >)
I used the fully qualified address, instead of $CATALINA_HOME/conf/JavaWorld_All_That_Jaas.config. I think XP balks when it sees $CATALINA_HOME).
3 Configure JAASRealm in server.xml
In %CATALINA_HOME%\conf\ I changed web.xml. I added the following lines:
<Realm className="org.apache.catalina.realm.JAASRealm"
appName="jaas"
userClassName="rdbmsjaas.RdbmsPrincipal"
debug="99"
/>If I run the jsp from http://localhost:8080/JavaWorld_Jaas/jaas.jsp, I can enter my username/password, but when I click the Submit button, I get:
Caught Exception: java.lang.SecurityException: Unable to locate a login configurationWhere did my configuration go wrong?
AbelYou will need a JSP/servlet engine such as Tomcat - Apache alone won't do it.
I haven't seen any tutorials on set-up but the Tomcat documentation includes info on how to link to Apache. There are also books you can buy - check out the online book stores such as Amazon.
There's also a lot of info on this forum. -
Beginner question: creating my own virtual instruments from samples
Hi, I have a beginner question. I'd like to make a click-track, but I want to use my own sounds, either recorded or from the internet. Can I do this with Logic Express 7, or do I need Logic Pro 7 and the EXS24?
Thanks,
RyanI think you can do it, but it might be a pain.
You could import a sample of a single click and just paste it into every beat on the Arrange Page.
Other than that, you might need the sampler included with Logic Pro -
Beginner question: support to HTTP POST om Oracle AS
Hi!
I don't know if this is a suitable forum but since i use JDeveloper and Oracle BPEL I'll try my luck here :).
I have a Java web application built in JDeveloper and a couple of BPEL processes.
In these processes I use Java embedding (a piece of Java code) that opens a connection to a given URL and post a XML message to this URL. I didn't have much problems creating these processes.
Now I have to provide a support to HTTP POST on my side. Since web application and services development are quite new to me I hope someone can point me the right way to do this. The requirements I have are: I can have a single URL to which the http POSTs will be issued.
If I understand correctly I cant use a web service since I have to enable different types of XML posts. What are my options? Can I create some kind of listener for http POSTs? Can I create a jspx that will 'wait' for http posts and than call some of mine BPEL processes? Is there a way to create a BPEL process that 'waits' for http POSTs? Are there other options.
I'd really appreciate any pointers on this.
Regards,
BB.Frank,
I've tried creating a Servlet listener that implements HttpSessionListener interface. Now I have two methods, sessionCreated and sessionDestroyed but I don't know where to go next. I can't find any documentation on this issue yet.
Should I create a jspx page with form node that has method attribute set to POST or maybe I don't even need a web page? I already have a login page that has a form with method set to POSt, will this pose any kind of troubles for me?
I apologize for any stupid questions but as I said I have no experience in doing this and las couple of days I'm searching and reading different documentation on this topic so any more pointers would be appreciated.
BB -
Beginner question: support to HTTP POST at Oracle AS
I tried same post on Application Server - General forum, but had no success.
I have a Java web application built in JDeveloper and a couple of BPEL processes.
In these processes I use Java embedding (a piece of Java code) that opens a connection to a given URL and post a XML message to this URL. I didn't have much problems creating these processes.
Now I have to provide a support to HTTP POST on my side. Since web application and services development are quite new to me I hope someone can point me the right way to do this. The requirements I have are: I can have a single URL to which the http POSTs will be issued.
If I understand correctly I cant use a web service since I have to enable different types of XML posts. What are my options? Can I create some kind of listener for http POSTs? Can I create a jspx that will 'wait' for http posts and than call some of mine BPEL processes? Is there a way to create a BPEL process that 'waits' for http POSTs? Are there other options.
I'd really appreciate any pointers on this.
Regards,
BB.Frank,
I've tried creating a Servlet listener that implements HttpSessionListener interface. Now I have two methods, sessionCreated and sessionDestroyed but I don't know where to go next. I can't find any documentation on this issue yet.
Should I create a jspx page with form node that has method attribute set to POST or maybe I don't even need a web page? I already have a login page that has a form with method set to POSt, will this pose any kind of troubles for me?
I apologize for any stupid questions but as I said I have no experience in doing this and las couple of days I'm searching and reading different documentation on this topic so any more pointers would be appreciated.
BB -
Jdeveloper Debugging Questions.
Hi All
I have a customer who has logged a SR with the following questions, may I please request one of developers to review these questions
Problem-1
When running OA framework pages from JDeveloper, is there a way to get the personalizations on the pages availabe while debugging. The pages I am able to run do not have the personalizations so cannot accurately run the page.
For iProcurement,I downloaded the pages from $ICX_TOP/mds. However the customizations done on these pages at the site/responsibility level are stored under the customizations path so not sure how to get these reflected on the downloaded seeded framework page.
Problem-2
I have a Descriptive Flexfield added on the OA Framework page. This DFF is comprising of multiple segments. I need to know a way to get the number of the child segment. [Descflex1, Descflex2 etc] to control the behavior of individual segment. Example - We have a DFF on the PO Requisition Lines comprising of 7 segments. I want to know how to get the positions of individual 7 segments.
Cheers
RoyHi Roy,
Problem-2
I have a Descriptive Flexfield added on the OA Framework page. This DFF is comprising of multiple segments. I need to know a way to get the number of the child segment. Descflex1, Descflex2 etc to control the behavior of individual segment. Example - We have a DFF on the PO Requisition Lines comprising of 7 segments. I want to know how to get the positions of individual 7 segments
You can get the number of child segments as :
OADescriptiveFlexBean Bean = (OADescriptiveFlexBean)webBean.findChildRecursive("testdff");
int number = Bean .getIndexedChildCount(null);
Thanks,
Gaurav -
Beginner question about granting access rights
Hi, am a total beginner, just a very simple question. I have created a number of tables with my admin account that I would like user accounts to be able to see (they should only be allowed to see these few tables)
I then created a user account called EDWARD with just the basic connect access right (I don't want them to be able to create/delete tables etc, just to be able to query the tables I have created above and to add rows to these tables)
Google searching has lead me to the grant statement, so I tried this from the admin account:
grant select, update, insert on CUSTOMERS to EDWARD;
This statement executes correctly but when I log in the EDWARD account I cannot do any of these things, instead I get the error: ORA-00942: table or view does not exist
Any ideas?
Thanks>>Would it be better to create a separate account called 'ADMIN' perhaps that I use for
my application admin and then grant them appropriate access to confidential tables
rather than logging them in as the SYSTEM?
Yes, this is what I would advise, since SYSTEM (like SYS and several others...) is not user like other, it's better do not work and create object under this one. Keep it for Oracle administration usage only, not for application administration, create your own schema for this.
Nicolas. -
Beginner Question - transferring username from login page to next page
Hi,
Beginner level Question ; would appreciate kind reply,TA
How can I implement the following scenario in abap?
I've a login screen wherein user enters requisite credentials.Once authenticated the transfer goes to next screen called erp_training.On this I need to implement the welcome ******* functionality where ******* represents the entered username from the first screen.(Like what happens in most emails when we login in)
Edited by: ItsmeAnkit on May 18, 2011 12:52 PMHi Ankit,
Ur query:
Implement the welcome ******* functionality where ******* represents the entered username .
The User who entered in the previous screen has his credentials like username stored in SAP SYST field sy-uname.
Please refer to the following link.
Display information message in SAP Initial Screen
try to code the message or use WRITE TEXT in the Userexit.
based on the following.
data: g_msg type string.
Change the sy-uname to character.
concatenate "Welcome to the Screen of ERP Training" sy-uname to g_msg
write g_msg.
Please do revert if the above is not correct solution for your problem
Thanks
Sri -
Beginner question: How to create a duplicate
Sorry to ask such a basic question .. I'm a beginner! Can't seem to find out how to create an exact duplicate of a photo I have finished editing ... so I can create a black & white version ... can someone help?
You are welcome, welcome..... ........The nicest and fastest reply in some time!
There are a ton of tutorials available online, and if you have any trouble finding same, post back and recommendations will be made.
Maybe you are looking for
-
Material wise bifurction in FBL5N
Dear All Our Requirement: We want the report FBL5N (open item) to be displayed on the basis of Materials (on the basis of the open item as on date and customer provide in the initial screen). We are able to pull the material no against the each custo
-
Hi all, My Old Laptop that had my Itunes, has died a death and cannot be saved. How can I save or access all my music and apps now? Can I set up a new Itunes account? Also I am getting an upgrade to Iphone 4 ,can I transfer all my music and apps on t
-
Issue while Reverse Engineering the HFM Application
Hi, We are in the process of integrating HFM (11.1.2.2.0) with ODI (11.1.1.6) for metadata upload from ODI to HFM, and, I am getting the following error while reverse engineering to the HFM application. org.apache.bsf.BSFException: exception from Jyt
-
How to set the IP address in L25 Tape library
I try to set the ip address in L25 tape library. But it is not stored in the NVRAM. For that purpose I restart the device. Then all the values are reset. please tell how to set the ip address.
-
I am trying to import a video into Premier Elements 11 and keep getting an error message
I'm trying to import a video into Premier Elements 11 and keep getting an error message but it doesn't say what the error is.