A jpeg marker segment length is too short

While imaging with my Canon T1i last night with my astro club I took probably 75 or 80 pics. Halfway through the session, my battery low indicator came on, so I changed the battery but may not have turned off the camera....I can't remember.....as I continued to shoot and review the images, everything looked and worked fine. When I returned home and got up this a.m. to review the pics, the last half could not be be opened. I usually insert my SD card in my laptop to review first before I transfer them over. I kept getting this error on the last half of the images I took :" a jpeg marker segment length is too short. The file may be truncated or incomplete." Anybody seen this or have any experience with this? Is there any way to recover and otherwise save these images? Any advice or help would be greatly appreciated. By not turning the camera off while changing batteries, could that be the reason for the error message? Thanks, Gary
Message was edited by: AstroLabsIdaho

It could be any one of a number of things such as the files being corrupted as the camera was writing them to the card, or a faulty card, a faulty USB connection or cable, etc.
Use only high quality cards ans cables, preferably use a card reader, be careful how you handle the camera, how you change batteries, etc. Common sense practices.
Google image recovery software.

Similar Messages

JPEG market segment length is too short

In copying a series of folders containing JPEGs, PSDs and RAW files (Canon .CR2 and Hasselblad .3F) to a new external drive (Mac OSX), there was a hiccup and a large number of the copied image files contain red dots next to them in the finder window. The files are named correctly and contain the full data size of the originals, but when attempting to open a JPEG I get the following error message:
Could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete).
When attempting to open a .PSD file the message is:
Could not complete your request because it is not a valid Photoshop document.
When attempting to open the RAW file in Bridge, the message is:
Could not complete your request because Photoshop does not recognize this type of file.
In the Get Info window, all three file types are correctly identified as Adobe Photoshop files, Adobe Photoshop JPEG files and Camera RAW files, and each is the correct size it should be.
This happened to some, but not all of the files on the drive, and it appears to have happened randomly. I have run Data Rescue on the drive, but the rescued file still have the red dots and do not open. I've also tried other file recovery programs, as well as Stellar Phoenix Photo Recovery and Jpeg Repair utilities, all to no avail.
I've tried renaming the files, and opening them from other programs such as preview, iPhoto and Lightroom. Still no luck.
I'm hoping someone has another angle for me. The data is there; it's obvious something happened that is preventing the files from opening, but it seems there should be some fix for this.
TIA

Your opening statement said you were copying, not moving the files.
If you were Moving the files, then the routine that was doing the moving erases behind unless they are coming from a CDROM or a write protected device..
Those files are essentially corrupted or incompatible with CC.
Did those files open okay where ever they lived before they were moved?
What was the "hiccup" that you mentioned? A Power Hiccup ? Then these files are toast if indeed there were in the middle of a Move..
Were you using Finder to do this task?

JPEG marker segment length error - file not corrupt

I have 2 workstations in my suite. Both Win7...both CS5.5 ver. 12.1.x64. My "old" box (Z400) can open the JPEG no problem....My "new" box (Z820) gives me the error.
I have copied the file a few different ways so I know it is not corrupt.
Any thoughts/suggestions would be greatly appreciated.

The error is "Could not complete your request because a JPEG marker segment length is too short (the file may be truncated to incomplete).
I'll try the preferences resetting.
Thanks for the quick responses.

TCURR field TCURR_UKURS - field length is too short

Has ECC6 addressed the field length issue of 9 characters (5 decimals) in table TCURR field UKURS to cater for weak currencies, to avoid using ratios of 1000:1

Hi,
I don't see any issue. UKURS field has 9 characters, that's right; but, as you rightly mentioned, it should not pose any problem considering the ratio. Why ratio of 1000:1 is posing a problem for you?
Regards,
Eli

JPEG with Error Message of Truncated Marker Segment

Hi,
I have a recurring annoying problem when sending JPEGS from my Mac to others (and myself). I use Entourage 2004 for the Mac, I'm running Leopard 10.5.6 on a G4 and a Macbook.
When I send a JPEG to someone who uses a web-based mail system (such as Yahoo, or SquirrelMail, etc.), they receive a message when trying to open the JPEG of:
"Could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete).
When I send the same file to myself via Entourage and open it within Entourage, it works fine. And when I send the same file FROM my Yahoo account, it works fine.
It's hard to keep track of what works and what doesn't, but it seems to affect just about anyone who tries to receive that file via a webbased mail system.
I've tried using different encodings (Apple Double, Mac, Windows), and it doesn't seem to matter.
Thanks for any advice.
Mark

iBookstore Publisher Support send me a fast response email which included some helpful info:
Please make sure that all image files inside the ePub end with one of the following: ".tif", ".jpg", or ".png" and that the file itself matches the file extension type. To check if the image file matches the file extension type, please right click on the image then select "Get Info". Once the info tab appears, please make sure that the file extension type of the image file matches the "Kind" found under "General".
For further information regarding embedded images, please refer to the iBookstore Asset Guide, which is available for download in the Deliver Your Content module in iTunes Connect.
And they INCLUDED THE TRANSPORTER LOG (!), the log generated by iTunes Producer as it tries to upload a book. We were able to search for the Validation Error # within the log and find out which image Producer was trying to upload when it encountered an error. Turns out the problem was a corrupted screenshot jpeg.
Grateful!

Photoshop no longer recognizes NEF files / won't open jpg files because of "missing marker segment"

I am running Photoshop CS6 on a 2013 iMac with OSX version 10.9.2.
1) As of today, Photoshop no longer recognizes NEF files. This has never happened before, and the files are coming from the same camera I've used for the past five years.
2) I receive the following message when I attempt to open a .jpg file "Could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete)."
This is also the first time this has happened, and happens with EVERY .jpg file I attempt to open.
3) Both of these errors ONLY happen when I am opening files located on the work server. I hit COMMAND K to connect to serveral work servers -- my work space, shared collaboration folder, and an image archive that was recently moved. If I grab the file that I want and transfer it to my desktop, and open it with Photoshop from there, it works fine.
I have run all updates.
I'm not sure if this is a Mac issue (with regard to accessing the work servers) or a Photoshop issue.
Any help is appreciated.
Thanks

Photoshop does "play nice" over networks, but seems to catch more OS and server bugs than other applications (mostly because we've added more error detection code over the years after dealing with many OS and server problems).

Channel length too short for calculation

I've just switched from 9.1 to 2010 and I was told that our VBS scripts wouldn't need updating - not so it seems.
I have the following piece of code:
Call ChnAlloc("Input PSD")
L1=Cno("RealPart")
L2=Cno("ImaginaryPart")
Call FormulaCalc("Ch('Input PSD'):=Ch(L1)^2+Ch(L2)^2")
but this doesn't work anymore. I get an error message saying that channel 7 (Input PSD) is too short for calculation. Previously I would have checked the data matrix but I can't find this anymore so I assume DIAdem works in a different way know. The help files suggest that the channel length option for ChnAlloc is optional so I don't understand why it thinks the channel is too short.
Any help appreciated.
Thanks, Si.

Hi SI,
You only need a minor addition, and you get the benefit that all new channels can have their length(s) dynamically changed. Please add this line of code after creating the channel and before the FormulaCalc() command:
ChnLength("Input PSD") = NeededNumberOfRows
Back in the dark days of the DIAdem memory matrix, DIAdem would by default launch with 60 static channels of exactly 8196 rows each. As you apparently know, you could customize the memory matrix to have fewer or more channels, and you could change their static lengths assigned when DIAdem launched. The fully dynamic channel lengths are a vast improvement, but it does mean that for FormulaCalc() commands you need to tell the channel to be big enough first. Interestingly, none of the ANALYSIS commands require you to do explicitly set the channel length before writing to them-- just the channel calculator.
Ask if you have any further trouble,
Brad Turpin
DIAdem Product Support Engineer
National Instruments

Multiple 30" Cinema Displays, cable length too short

I have two 23" Cinema Displays, and they work great! Power adapters have long clean leads and can put them away from my G5 and place the displays where I want. Then I bought a 30" Cinema Display to try in prep for a "Nehalem" machine. I discovered that the power adapter has to be 6 inches away from the back of the computer and the monitor cable is SHORT. I want to use two 30" displays, but the cables are too SHORT and I don't want those two white bricks (power adapters) behind a new Nehalem. Apple says you can run up to eight 30" displays, with the necessary video cards, but no mention how to reach the second display let alone the 8th display!! Does Apple have cables in a male-female configuration? I have looked at Gefen.com and their extensions are Male-Male for the Apple Combo Extension Cables for dual link (30"). I could say demeaning things right now, but I won't.

Thank you for the quick reply, I can place the power adapter where I want with your solution. You would have posted if you knew about an extension with an "elegant breakout for connection to DVI, USB and FireWire ports" but I will still ask if you know of that kind also so that all monitors have USB and FireWire.

Error "602" System error: AK Datapart too short

Hi all,
Ok, I have looked just about everywhere for an answer to this but to no avail...I even tried under a few rocks we have laying around.
Anyway here it is:
While running a compression in BW we get Error "602" System error: AK Datapart too short.
This is happening while doing a select statement during the compression of the infocube. It does not happen all the time, just kind like when ever it feels like. The only note I could find in OSS was one about Live Cache and it does not seem to apply.
Here is the dump which I really hate doing this, but it gives all the info needed :
untime Error          DBIF_DSQL2_SQL_ERROR
Except.                CX_SY_NATIVE_SQL_ERROR
Date and Time          08/15/2007 12:23:09
ShrtText
An SQL error occurred when executing Native SQL.
What happened?
Error "-602" occurred in the current database connection "DEFAULT".
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
How to correct the error
Database error text........: "System error: AK Datapart too short"
Database error code .......: "-602"
Triggering SQL statement...: "INSERT INTO "/BIC/EZPSD_C03" ( "KEY_ZPSD_C03P",
"KEY_ZPSD_C03T", "KEY_ZPSD_C03U", "KEY_ZPSD_C031", "KEY_ZPSD_C032",
"KEY_ZPSD_C033", "KEY_ZPSD_C034", "/BIC/ZNET_ASP" ) SELECT ? ,
F."KEY_ZPSD_C03T", F."KEY_ZPSD_C03U", F."KEY_ZPSD_C031", F."KEY_ZPSD_C032","
Internal call code.........: "[DBDS/NEW DSQL]"
Please check the entries in the system log (Transaction SM21).
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"DBIF_DSQL2_SQL_ERROR" CX_SY_NATIVE_SQL_ERRORC
"GP31VIZWJDTT90894L1IA5YAC7G" or "GP31VIZWJDTT90894L1IA5YAC7G"
"TRANSFER_ALL"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within the procedure
"TRANSFER_ALL"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
System environment
SAP Release.............. "640"
Application server....... "sdcbw03"
Network address.......... "10.64.18.76"
Operating system......... "Linux"
Release.................. "2.6.9-55.ELsmp"
Hardware type............ "x86_64"
Character length......... 16 Bits
Pointer length........... 64 Bits
Work process number...... 21
Short dump setting....... "full"
Database server.......... "sdcbw03"
Database type............ "ADABAS D"
Database name............ "BWP"
Database owner........... "SAPBWP"
Character set............ "C"
SAP kernel............... "640"
Created on............... "Nov 5 2006 19:46:34"
Created in............... "Linux GNU SLES-9 x86_64 cc3.3.3"
Database version......... "SAPDB 7.5.0.030 "
Patch level.............. "156"
Patch text............... " "
Supported environment....
Database................. "MaxDB 7.5.0"
SAP database version..... "640"
Operating system......... "Linux 2.6"
Memory usage.............
Roll..................... 16192
EM....................... 20949280
Heap..................... 0
Page..................... 24576
MM Used.................. 9235016
MM Free.................. 3331560
SAP Release.............. "640"
User and Transaction
Client.............. 011
User................ "ALEREMOTE"
Language key........ "E"
Transaction......... " "
Program............. "GP31VIZWJDTT90894L1IA5YAC7G"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "GP31VIZWJDTT90894L1IA5YAC7G" in
"TRANSFER_ALL".
The main program was "RSPROCESS ".
The termination occurred in line 573 of the source code of the (Include)
program "GP31VIZWJDTT90894L1IA5YAC7G"
of the source code of program "GP31VIZWJDTT90894L1IA5YAC7G" (when calling the
editor 5730).
The program "GP31VIZWJDTT90894L1IA5YAC7G" was started as a background job.
Job name........ "BI_PROCESS_COMPRESS"
Job initiator... "ALEREMOTE"
Job number...... 12185102
Processing was terminated because the exception "CX_SY_NATIVE_SQL_ERROR"
occurred in the
procedure "TRANSFER_ALL" "(FORM)" but was not handled locally, not declared in
the
RAISING clause of the procedure.
The procedure is in the program "GP31VIZWJDTT90894L1IA5YAC7G ". Its source code
starts in line 557
of the (Include) program "GP31VIZWJDTT90894L1IA5YAC7G ".
Source Code Extract
Line
SourceCde
543
ENDIF.
544
545
COMMIT WORK.   " commit and close cursors
546
547
l_str = i_max_requid.
548
PERFORM msg_append(saplrscondense)
549
USING    'S' '355' l_str space space space
550
CHANGING c_t_msg.
551
552
ENDFORM.                               " CONDENSE_FACTTABLE_NEW
553
554
555
     Form TRANSFER_ALL
556
557
FORM TRANSFER_ALL USING i_ref_update       TYPE rs_bool
558
i_pdimid           TYPE I
559
i_pdimid_ref_point TYPE rsd_sid
560
i_pdimid_normal    TYPE rsd_sid
561
i_recordtp         TYPE rsd_sid
562
CHANGING e_ref_ins_cnt TYPE I
563
e_ins_cnt     TYPE I
564
c_t_msg       TYPE rs_t_msg.
565
566
CALL FUNCTION 'RSDU_INFOCUBE_INDEXES_DROP'
567
EXPORTING
568
I_INFOCUBE = 'ZPSD_C03'
569
I_FACTTAB = '/BIC/EZPSD_C03'.
570
571
572
EXEC SQL.
>>>>>
INSERT INTO "/BIC/EZPSD_C03"
574
( "KEY_ZPSD_C03P"
575
, "KEY_ZPSD_C03T"
576
, "KEY_ZPSD_C03U"
577
, "KEY_ZPSD_C031"
578
, "KEY_ZPSD_C032"
579
, "KEY_ZPSD_C033"
580
, "KEY_ZPSD_C034"
581
, "/BIC/ZNET_ASP"
582
583
SELECT :i_pdimid_normal
584
, F."KEY_ZPSD_C03T"
585
, F."KEY_ZPSD_C03U"
586
, F."KEY_ZPSD_C031"
587
, F."KEY_ZPSD_C032"
588
, F."KEY_ZPSD_C033"
589
, F."KEY_ZPSD_C034"
590
, SUM( F."/BIC/ZNET_ASP" )
591
FROM "/BIC/FZPSD_C03" F
592
WHERE F."KEY_ZPSD_C03P" = :i_pdimid
Any thoughts would be helpful,
Thanks,
David

This error usually occurs when there is a database lock or no space in teh database. Got DB02 and Click on Space critical objects to see whether any entries are there. If yes contact your basis to increase the space.
Hope this helps
Thanks,
Satish

Postal code is too short or invalid when trying to sign up for windows azure

https://account.windowsazure.com/signup?offer=ms-azr-0044p
language is Netherlands
country is Belgium
postal code is "8870" but is considered too short
I also tried "BE8870" or "BE-8870" but these are considered invalid
how do I continue?

HI
May be you can try "8870 Emelgem".
If still can't help Please contactsupport team by creating a support ticket at
http://www.windowsazure.com/en-us/support/contact/
Or if that doesn't work because you don't have an active subscription you will need to contact general customer support to have them create a support ticket for you
http://support.microsoft.com/gp/customer-service-phone-numbers?wa=wsignin1.0
Dino He
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

6500A Plus - Duplex return message paper too short

Just install the new printer yesterday and never managed to print two side (deplux) documents.
When enabling the two-sides print mode, i got a warning message on the computer that the media size is too short (french message because of my setup).
When clicking OK, it start printing but on different paper (no duplex!!)...?

The attachment contains information on duplex printing from an HP document. Also, have you tried to perform this task directly from the printers front panel?
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.
Attachments:
Print on both sides.docx ‏13 KB

Key Lenght too short error with dbms_crypto.encrypt

Hi Friends,
I am getting above mentioned error with dbms_crypto.encrypt.
I had created a thread in technology --> security forum but i am not getting any help from there.
ORA-28234 Key Length too short with dbms_crypto.encrypt
Appreciate if anyone help me resolve this issue.
Thanks
AT

Hi Warren,
Yes function is compiled without any compilation error.
Thanks
AT

Invalid segment length (LL) of [1804] in input object-Using J2C Connector

Hello,
I have been struggling with this issue for the past 1 week .I am using J2C Connector tools to generate beans that lets us to communicate to cobol programs.
In cobol code we have declared LL as like this.
05 LL PIC S9(4) COMP.
05 ZZ PIC XX.
Using J2C Connector tools for this cobol programs(input and output records) total 5 fils are generated. Those are
InputRecord.java,OutputRecord.java,
java beans:Interface1.java,Interface1Impl.java
Command Bean: RetrieveDetails.java.
Here on i am setting all screen values and IMS related stuff in inputrecord
and executing with this input on commandbean object,then we will get the output record contains all the output data.
Here the problem is when i am setting the LL value like this and executing i am getting the follwing error.
InputRecord inputRocord = InputRecord();
inputrecord.setL1((short) 1804);
RetrieveDetails commandBean= RetrieveDetails();
commandBean.set(inputrecord);
commandBean.execute();
javax.resource.ResourceException: ICO0024E: [email protected]ldInputMsg(Record)
error. Invalid segment length (LL) of 19200 in input object. [email protected](byte[):
And one more quetion is in set() method which type of parameter we can set?
what i think is , 1804 is total length of variables of cobol file.is it right or not?
Could anyone help me out this problem.Help would be greatly appreciated.Its very urgent..please.......
if you drop a mail also to [email protected] would be better.
Thanks in advance.
venkat.

Hi Venkat
Were you able to solve this issue ? I am having the same problem but could not find the answer.
Please drop an email at [email protected] if you have any solution.
Thanks

Error message "paper too short to autoduplex" on Officejet Pro 8600

I have this problem with my new HP Officejet Pro 8600 Plus. I have standard letter size paper in Tray 1, and have all the printer setup set for letter size paper. No matter what program I print from, I recieve the error message "paper too short to auto-duplex". I click the close button, and the page prints. It is aggravating to take the extra step to close this error message every time I print. I shut the printer down for 30-60 seconds and this took the problem away. Is this normal? Will I have to do this often?

The fix is available in printer firmware (Software within the Printer). You can download it from hp.com and install from you pc to printer.
Here is the link. click download buttong to download the latest firmware.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-102210-1&cc=us&dlc=en&lc=en...
Happy Printing...
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

FMDependency field too short in Sharepoint

Hi,
we are using FM10 with Sharepoint 2010.
It works fine, generally speaking, but we are running into an issue with the field FMDependency.
The field is created automatically when a FM10 file is uploaded. However it is too short for the kind of dependencies we have and it issues an error when we modify other metadata in Sharepoint and save the item.
is it possibile to change the length of this field ? Where and how ?
Thanks for your support
Carlo Tognoni
Milano - Italy

I have not tried this myself, but I am concerned in case the problem affects us one day. If you follow this suggestion, please let us know how it goes.
In SharePoint:
Site Actions > Site Settings > Site Administration: Site Libraries and lists > Customize [your DITA list].
Scroll down to the Columns section and select FMDependency.
In the Additional Column Settings section, set Allow unlimited length in document libraries to Yes.
My reference for this was http://sharepoint.stackexchange.com/questions/14195/more-than-255-characters-in-multiple-l ines-of-text
Alternatively, you could try increasing the Number of lines for editing on the same page.

A jpeg marker segment length is too short

Similar Messages

Maybe you are looking for