"A" key doesn't always register

Hi,
My A key occasionally will not register with the iBook unless I press it down a bit harder than normal. A while ago, that happened with Control (not Command), but this has since stopped. The A isn't doing it right now. Anybody know what might cause that?
Also, if it turns out that I need a new keyboard, I'm certainly not taking it in– I'll be buying a USB one instead. Hopefully that's not the case.

Hey CP,
My A key occasionally will not register with the iBook unless I press it down a bit harder than normal. A while ago, that happened with Control (not Command), but this has since stopped. The A isn't doing it right now. Anybody know what might cause that?
most likely something under the key. That happened to mine and it turned out to be a piece of wood.
Removal here:
http://mij.oltrelinux.com/ibook/cleaning_keyboard/
Richard

Similar Messages

ITunes 10.4.1 Problem with Key Command Go to Current Song - Doesn't always work

Since updating to iTunes 10.4.1, I've noticed that the key command, command + L doesn't always work to display the current song.

I have this problem in iTunes 10.7 (21). The "Go to Current Song" option exists in the Controls menu, but even when audio is playing it is disabled.

BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)

BUG: KEYBOARD SHORTCUT KEYS DO NOT ALWAYS ACTIVATE A SERVICE (A WORKFLOW)
When you assign a keyboard shortcut to a Service (such as a Service Workflow created in Automator) using the System Preferences > Keyboard > Shortcuts, if that shortcut key combination includes the Command key, pressing that shortcut will always successfully activate the Service. No problem there.
However, shortcut key combinations that do not include the Command key (for example, the shortcut key combo Ctrl-Shift-D) WILL NOT activate the Service in any newly opened application, until you click on the Services Menu option in that application.
As soon as you click on the application's Services Menu, this seems to bind the shortcut key combo to the Service, and thereafter, that keyboard shortcut will activate the Service in that particular app. But if you then quit and reopen the app, you'll find the Service will once again lose its binding to the shortcut key combination and will thus fail to work again.
This means that shortcut key combinations such as Ctrl-D, Ctrl-Shift-D, F15, Alt-F15, etc are not really viable shortcuts for Services, because they will not work in any newly-opened application until you click on the Services Menu in that application.
This bug thus greatly limits the shortcuts that you can employ for Services, because you can only reliably use shortcut key combos that contain the Command key. This is a fault that Apple really needs to fix. This is a very old glitch: I notice it is present in Snow Leopard 10.6.8, as well as Yosemite 10.10.1.
This bug does not apply to application shortcuts, however, or to other shortcuts in the Shortcuts Preference Pane, just to Services shortcuts (including the Mac's default Services, or any Services you make yourself using Workflows on the Automator software).
To give some examples:
The following keyboard shortcuts for Services WILL NOT work until you click on the Services Menu in the application you are using (and they will cease working again when you quit and reopen the app):
Ctrl-X
Ctrl-Shift-X
Ctrl-Alt-X
Ctrl-Alt-Shift-X
Alt-X
Alt-Shift-X
F1, F2, F3, etc
So until Apple fixes this bug, the above type of key combinations, that do not contain the Command key, are best avoided as shortcuts for Services. It is particularly unfortunate that function keys F1 to F19 do not work reliably, as these would make great single-key shortcuts to Services.
However, the following sort of keyboard shortcuts for Services, all containing the Command key, once set up will always work without fail:
Command-Alt-X
Command-Ctrl-X
Command-Shift-X
Command-Ctrl-Shift-X
Command-Alt-Ctrl-Shift-X
Command-F1, Command-F2, Command-F3, etc
So all the above can be reliably used as shortcuts to Services.
Here X denotes keyboard keys such as A, B, C, 1, 2, 3, =, \, [, etc.
Note that even for keyboard shortcuts containing the Command key, you may very occasionally need to click the Services Menu to get them to work initially in an application (notably in the System Preferences application itself). But if this is necessary, it is just required once when they are first set up, and thereafter the shortcuts containing the Command key will always work without fail.
The above was tested on Yosemite 10.10.1, but most likely applies to other versions of OS X as well, as I believe this bug is an old one. This bug is definitely present in Snow Leopard 10.6.8, because I have observed this same fault in an old Mac I have that runs Snow Leopard.
I have reported this bug to Apple, so hopefully they will see my report and act upon it. However, it might be an idea if others also report this problem of Services shortcuts not working property, to ensure that Apple get the message. You can report a bug to Apple via their bug feedback page here.

Exactly where do you want to use a GO BACK "shortcut" in Bridge? Maybe I don't even understand what you mean by Go Back. Bridge is only a file browser, nothing more. It doesn't open, edit, manipulate or save files at all.
Are you simply referring to going back to view a folder that you viewed before?
Please don't take this a criticism. As someone who will gladly pay money not to have to learn any shortcuts at all, I'm just puzzled and curious, that's all.

My mac book air doesn't always charge

my mac book air doesn't always charge. The charger doesn't always light up. Please advise.

unlikely your charger is bad, rather it sounds as if your IO BOARD may be defective, perform a SMC reset and re-verify same.
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
If same contact Apple for full in shop diagnostic and possible parts replacement.

PB doesn't always start up/won't run on charged battery

I have a 15" aluminum PowerBook that I've slowly been bringing back to life after it had a full mug of coffee dumped into it. I cleaned everything out and it's working again, for the most part. However, there are a couple of unresolved problems. The biggest is the computer doesn't always start up. I've also noticed that it won't run on the battery alone, even though the battery is fully charged. When unplugging the computer, the screen goes dark but the computer is still making noise -- it's running to some extent. Any pointers on how to get things running again properly would be greatly appreciated.

If you're able to charge the battery while it's in the computer, and pushing the button on the back of the battery shows all the LEDs lighting up, that suggests that you have a logic board problem. There are only 4 components to the charging circuit: power adapter, DC-in card, battery, and logic board. If what you described is that you can hook the power adapter up and charge the battery completely in the computer, the only component left is the logic board.
While there aren't any tests I've found to test the charging circuit, have you run the Apple hardware test or either of the TechTool programs to test the system? Insert your original OS X disk that says 'AHT Version x.x' in small print on the label. Reboot holding the option key down, choose the Apple hardware test, and when prompted choose the extended test. Does that give you any errors?

N97 Slide switch doesn't always turn on the back l...

New N97, when I lock the phone and try to unlock it, the back light doesn't always turn on. I have to slide the switch two or 4 more times to get the back light to turn on.

@Igkahn1
when the phone is lock then unlocked the light light doesnt come back on and anything u press doesnt turn it back on but the slider to lock and reunlock.
Example If it lock my n07 wait 10 seconds (or until end and send lights go off) try to unlock the backlight wont come back on and while that backlight is off if i press the menu, open keybroad, any of the qwerty keys or even the power button the back light will still remain off. The only thing that seems to turn back on the backlight for me is locking then unlocking.
@everyone esle
Can anyone esle having this problem can confirm that while the back light off try menu, open keybroad, qwerty keys and power button to reactivate the backlight.
Message Edited by mwlai on 21-Jun-2009 04:31 AM

IMac keyboard doesn't always work properly and Magic Mouse battery drain

Owned my iMac for a few months now. First off, my batterys only lasted 23 days, not 3 months like stated by Apple. I've use both Duracell and Energizer and both last less than a month. Secondly, my wireless keyboard doesn't always function properly. When I'm trying to type something out, I always end up having to go back and add something that the keyboard has missed..
For example, I just tested my Cap Locks key. I pressed it 10 times normally as you would when typing and the green LED only lit for 3 of the 10.
But when I press hard it works everytime
Is this a common problem or have I been sent out a defective pack?
Thanks

It's a long shot, but is a non-standard input selected here:
 > System Preferences > Language & Text
Try selecting 'British' and see if the problem persists. Also, if you click on the little nationality flag in the menubar at the top of the screen and choose 'Show Keyboard Viewer', what happens when you press the '3' key? Does it light up as expected?

My USB mouse doesn't always start at boot.

After updating from Arch 0.7.1 to 0.8, one of the big pile of bugs I had was that my USB mouse doesn't always start at boot. In fact, when I start the computer, the red LED in the mouse lights up but sometimes it switches off after the menu where I can choose to use Arch linux or .. Arch linux.
So, the mouse switches off before I startx one time on two. When it happens I just deplug and replug it but I hate to do that.
Need some help.

dmesg when the mouse isn't working :
$ dmesg
Linux version 2.6.19-ARCH (root@Laptop) (gcc version 4.1.2 20061215 (prerelease)
) #1 SMP PREEMPT Thu Jan 11 20:08:17 CET 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f800000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
248MB LOWMEM available.
Entering add_active_range(0, 0, 63488) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63488
HighMem 63488 -> 63488
early_node_map[1] active PFN ranges
0: 0 -> 63488
On node 0 totalpages: 63488
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 464 pages used for memmap
Normal zone: 58928 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000ec010
ACPI: RSDT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec080
ACPI: FADT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec0cc
ACPI: SSDT (v001 COMPAQ HAWA7K3 0x00000001 MSFT 0x0100000c) @ 0x000ec223
ACPI: DSDT (v001 COMPAQ DSDTTBL 0x00000001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xee08
Allocating PCI resources starting at 10000000 (gap: 0f800000:f07c0000)
Detected 901.637 MHz processor.
Built 1 zonelists. Total pages: 62992
Kernel command line: root=/dev/hda3 ro earlymodules=piix
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011fa000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 246968k/253952k available (2330k kernel code, 6392k reserved, 735k data,
260k init, 0k highmem)
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc0000000 - 0xcf800000 ( 248 MB)
.init : 0xc0405000 - 0xc0446000 ( 260 kB)
.data : 0xc0346806 - 0xc03fe64c ( 735 kB)
.text : 0xc0100000 - 0xc0346806 (2330 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1805.52 BogoMIPS (lpj=3611040)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000
00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 0000000
0 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
checking if image is initramfs... it is
Freeing initrd memory: 501k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c28)
CPU0: AMD Duron(tm) Processor stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa154, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
PCI quirk: region ee00-eeff claimed by vt82c586 ACPI
PCI quirk: region ec00-ec0f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0xee00-0xee7f could not be reserved
pnp: 00:0b: ioport range 0xee80-0xeeff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 80000000-800fffff
PREFETCH window: 88000000-8fffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PBTN]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
3
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 260k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:14.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:14.1
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.101 (c) Dave Jones
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 11, io base 0x00001840
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:14.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ
11
uhci_hcd 0000:00:14.3: UHCI Host Controller
uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:14.3: irq 11, io base 0x00001860
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0x90000000
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,EC
P]
parport_pc: VIA parallel port: io=0x378, irq=7
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ
10
PCI: Setting latency timer of device 0000:00:14.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input1
via686a 0000:00:14.4: base address not set - upgrade BIOS or use force_addr=0xad
dr
vt596_smbus 0000:00:14.4: SMBUS: Error: Host SMBus controller not enabled! - upg
rade BIOS or use force=1
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
PCI: Enabling device 0000:00:05.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
5
eth0: VIA Rhine II at 0x11000, 00:05:5d:e9:5a:17, IRQ 5.
eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 0021.
usbcore: registered new interface driver hiddev
usbhid: probe of 1-1:1.0 failed with error -71
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
lp0: using parport0 (interrupt-driven).
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Real Time Clock Driver v1.12ac
ppdev: user-space parallel port driver
EXT3 FS on hda3, internal journal
Adding 262576k swap on /dev/hda2. Priority:-1 extents:1 across:262576k
scsi 0:0:0:0: Direct-Access JetFlash TS256MJF110 0.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
3
[drm] Initialized savage 2.4.1 20050313 on minor 0
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
eth0: no IPv6 routers present
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
And here's the output of dmesg when the mouse works :
$ dmesg
Linux version 2.6.19-ARCH (root@Laptop) (gcc version 4.1.2 20061215 (prerelease
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ec000 - 00000000000f0000 (ACPI NVS)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000f800000 (usable)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
248MB LOWMEM available.
Entering add_active_range(0, 0, 63488) 0 entries of 256 used
Zone PFN ranges:
DMA 0 -> 4096
Normal 4096 -> 63488
HighMem 63488 -> 63488
early_node_map[1] active PFN ranges
0: 0 -> 63488
On node 0 totalpages: 63488
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 4064 pages, LIFO batch:0
Normal zone: 464 pages used for memmap
Normal zone: 58928 pages, LIFO batch:15
HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP (v000 COMPAQ ) @ 0x000ec010
ACPI: RSDT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec080
ACPI: FADT (v001 COMPAQ HAWA7K31 0x00010503 0x00000000) @ 0x000ec0cc
ACPI: SSDT (v001 COMPAQ HAWA7K3 0x00000001 MSFT 0x0100000c) @ 0x000ec223
ACPI: DSDT (v001 COMPAQ DSDTTBL 0x00000001 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0xee08
Allocating PCI resources starting at 10000000 (gap: 0f800000:f07c0000)
Detected 901.637 MHz processor.
Built 1 zonelists. Total pages: 62992
Kernel command line: root=/dev/hda3 ro earlymodules=piix
Local APIC disabled by BIOS -- you can enable it with "lapic"
mapped APIC to ffffd000 (011fa000)
Enabling fast FPU save and restore... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 246968k/253952k available (2330k kernel code, 6392k reserved, 735k data
virtual kernel memory layout:
fixmap : 0xfff83000 - 0xfffff000 ( 496 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
lowmem : 0xc0000000 - 0xcf800000 ( 248 MB)
.init : 0xc0405000 - 0xc0446000 ( 260 kB)
.data : 0xc0346806 - 0xc03fe64c ( 735 kB)
.text : 0xc0100000 - 0xc0346806 (2330 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 1805.52 BogoMIPS (lpj=3611040)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000420 00000000 000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
checking if image is initramfs... it is
Freeing initrd memory: 501k freed
ACPI: Core revision 20060707
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
ACPI: setting ELCR to 0200 (from 0c28)
CPU0: AMD Duron(tm) Processor stepping 01
SMP motherboard not detected.
Local APIC not detected. Using dummy APIC emulation.
Brought up 1 CPUs
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfa154, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs *3 4 5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 15)
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
ACPI: Assume root bridge [_SB_.PCI0] bus is 0
PCI quirk: region ee00-eeff claimed by vt82c586 ACPI
PCI quirk: region ec00-ec0f claimed by vt82c686 SMB
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 12 devices
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved
pnp: 00:0b: ioport range 0xee00-0xee7f could not be reserved
pnp: 00:0b: ioport range 0xee80-0xeeff has been reserved
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: 80000000-800fffff
PREFETCH window: 88000000-8fffffff
PCI: Setting latency timer of device 0000:00:01.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 4096 (order: 3, 49152 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
apm: BIOS not found.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Installing knfsd (copyright (C) 1996 [email protected]).
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
PCI: Disabling Via external APIC routing
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PBTN]
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
PCI: Enabling device 0000:00:03.0 (0000 -> 0001)
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 3
PCI: setting IRQ 3 as level-triggered
ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 260k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:14.1
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci0000:00:14.1
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:pio, hdd:DMA
Probing IDE interface ide0...
hda: QUANTUM FIREBALLlct20 40, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdd: Compaq CRD-8322B, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=65535/16/63
hda: cache flushes not supported
hda: hda1 hda2 hda3
hdd: ATAPI 32X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux agpgart interface v0.101 (c) Dave Jones
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:14.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IR
uhci_hcd 0000:00:14.2: UHCI Host Controller
uhci_hcd 0000:00:14.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:14.2: irq 11, io base 0x00001840
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:14.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IR
uhci_hcd 0000:00:14.3: UHCI Host Controller
uhci_hcd 0000:00:14.3: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:14.3: irq 11, io base 0x00001860
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart: Detected VIA Twister-K/KT133x/KM133 chipset
agpgart: AGP aperture is 64M @ 0x90000000
usb 1-1: new low speed USB device using uhci_hcd and address 2
usb 1-1: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
parport_pc: VIA 686A/8231 detected
parport_pc: probing current configuration
parport_pc: Current parallel port base: 0x378
parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,E
parport_pc: VIA parallel port: io=0x378, irq=7
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:14.5[C] -> Link [LNKC] -> GSI 10 (level, low) -> IR
PCI: Setting latency timer of device 0000:00:14.5 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input1
via686a 0000:00:14.4: base address not set - upgrade BIOS or use force_addr=0xa
vt596_smbus 0000:00:14.4: SMBUS: Error: Host SMBus controller not enabled! - up
via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
PCI: Enabling device 0000:00:05.0 (0004 -> 0007)
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
PCI: setting IRQ 5 as level-triggered
ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ
eth0: VIA Rhine II at 0x11000, 00:05:5d:e9:5a:17, IRQ 5.
eth0: MII PHY found at address 8, status 0x782d advertising 01e1 Link 0021.
usbcore: registered new interface driver hiddev
usbhid: probe of 1-1:1.0 failed with error -71
usbcore: registered new interface driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Initializing USB Mass Storage driver...
lp0: using parport0 (interrupt-driven).
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
Real Time Clock Driver v1.12ac
ppdev: user-space parallel port driver
EXT3 FS on hda3, internal journal
Adding 262576k swap on /dev/hda2. Priority:-1 extents:1 across:262576k
scsi 0:0:0:0: Direct-Access JetFlash TS256MJF110 0.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
eth0: link up, 10Mbps, half-duplex, lpa 0x0021
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
SCSI device sda: 512000 512-byte hdwr sectors (262 MB)
sda: Write Protect is off
sda: Mode Sense: 00 00 00 00
sda: assuming drive cache: write through
sda: sda1
sd 0:0:0:0: Attached scsi removable disk sda
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 3 (level, low) -> IRQ
[drm] Initialized savage 2.4.1 20050313 on minor 0
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
eth0: no IPv6 routers present
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
mtrr: base(0x8a000000) is not aligned on a size(0x5000000) boundary
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
usb 1-1: USB disconnect, address 2
usb 1-2: USB disconnect, address 3
usb 1-1: new low speed USB device using uhci_hcd and address 4
usb 1-1: configuration #1 chosen from 1 choice
input: HID 062a:0000 as /class/input/input2
input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:14.2-1

My iPhone 5S won't show up in iTunes to sync. It charges still and it opens iPhoto, but doesn't even register in iTunes

My iPhone 5S won't show up in iTunes to sync. It charges still and it opens iPhoto, but doesn't even register in iTunes. I have no idea what to do and nothing is working!
And the other night while i was trying to sync my phone, it was working until "Error message (-50)" started coming up every time i tried to sync or update my phone's software through itunes on my computer. eventually, itunes quit and i unplugged my phone and updated it wirelessly. i have no idea why any of this is happenings. Itunes is still acting weird for me too.

Error -50 is generally associated with firewalls or anti-virus software as described here:
http://support.apple.com/kb/TS1583
Separately, are you using iTunes 11.1.4?

I am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

i am locked out of my account because my password includes "[" and my computer is set to spanish. In spanish that key doesn't work. How do I gejt back into my computer?

If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
 ▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead the instructions on this page:
If you forget the password and FileVault is on

Time doesn't always appear

The time under the received column doesn't always appear. If I click on the message, it shows but then goes away. It's very inconsistent. Repairing permissions and restarting doesn't change the behavior.

I'm guessing you did not carefully read your owners manual, did you? Unless you are not going to be using your computer for several days at a time there is no reason to shut it down. Your manual states:
_Putting Your MacBook Pro to Sleep_
*If you’ll be away from your MacBook Pro for only a short time, put it to sleep. When the computer is in sleep, you can quickly wake it and bypass the startup process.*
AND
_Shutting Down Your MacBook Pro_
*If you aren’t going to use your MacBook Pro for a couple of days or longer, it’s best to shut it down.*

In the expression editor dialog box my TAB key doesn't function correctly

This is bizarre behavior that seems to have started recently.
In Visual Studio 2012, an SSRS project, any expression editor dialog:
The tab key doesn't work right.
Open the expression editor and:
* I see a blinking cursor and I can type in the expression box.
* If I hit the tab key, the cursor disappears and I cannot type. I appear to lose focus in the editor but focus doesn't appear to go anywhere else in the dialog box.
* If I hit the tab key a 2nd time, the cursor is still gone and I cannot type.
* If I hit the tab key a 3rd time, I can finally type again and note that I am now
3 tabstops in. In other words it seems like the tabs were working but I lost the ability to type anything until I "tab" 3 magical times.
I can work around this by hitting tab key then grabbing the mouse and clicking where the cursor SHOULD be which returns focus to the text area.
Hopefully this image helps clarify:
Anybody know what is wrong?
Microsoft Visual Studio Professional 2012
Version 11.0.61030.00 Update 4
Microsoft .NET Framework
Version 4.5.50709
Installed Version: Professional
LightSwitch for Visual Studio 2012 04938-004-0034007-02367
Microsoft LightSwitch for Visual Studio 2012
Office Developer Tools 04938-004-0034007-02367
Microsoft Office Developer Tools
Team Explorer for Visual Studio 2012 04938-004-0034007-02367
Microsoft Team Explorer for Visual Studio 2012
Visual Basic 2012 04938-004-0034007-02367
Microsoft Visual Basic 2012
Visual C# 2012 04938-004-0034007-02367
Microsoft Visual C# 2012
Visual C++ 2012 04938-004-0034007-02367
Microsoft Visual C++ 2012
Visual F# 2012 04938-004-0034007-02367
Microsoft Visual F# 2012
Visual Studio 2012 Code Analysis Spell Checker 04938-004-0034007-02367
Microsoft® Visual Studio® 2012 Code Analysis Spell Checker
Portions of International CorrectSpell™ spelling correction system © 1993 by Lernout & Hauspie Speech Products N.V. All rights reserved.
The American Heritage® Dictionary of the English Language, Third Edition Copyright © 1992 Houghton Mifflin Company. Electronic version licensed from Lernout & Hauspie Speech Products N.V. All rights reserved.
Visual Studio 2012 SharePoint Developer Tools 04938-004-0034007-02367
Microsoft Visual Studio 2012 SharePoint Developer Tools
ASP.NET and Web Tools 2012.3.41009
Microsoft Web Developer Tools contains the following components:
Support for creating and opening ASP.NET web projects
Browser Link: A communication channel between Visual Studio and browsers
Editor extensions for HTML, CSS, and JavaScript
Page Inspector: Inspection tool for ASP.NET web projects
Scaffolding: A framework for building and running code generators
Server Explorer extensions for Windows Azure Web Sites
Web publishing: Extensions for publishing ASP.NET web projects to hosting providers, on-premises servers, or Windows Azure
Color Theme Designer 1.0
Designer for creating new color themes
NuGet Package Manager 2.8.50126.400
NuGet Package Manager in Visual Studio. For more information about NuGet, visit http://docs.nuget.org/.
PreEmptive Analytics Visualizer 1.0
Microsoft Visual Studio extension to visualize aggregated summaries from the PreEmptive Analytics product.
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 11.0.3369.0
SQL Server Data Tools 11.1.40706.0
Microsoft SQL Server Data Tools
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 11.0.3369.0
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3369.0
BIDSHelper
BIDS Helper 2012 - An add-in to extend SQL Server Data Tools - Business Intelligence (SSDTBI formerly BI Development Studio)
(c) 2014 Version 1.6.6.0
http://www.codeplex.com/bidshelper
SQL Prompt 6
For more information about SQL Prompt, see the Red Gate website at
http://www.red-gate.com
For customer support, call 1-866-733-4283.
Copyright © 2006–2009 Red Gate Software Ltd

Hi Bostaevski,
Thank you for posting in MSDN forum.
According to your description, as you said that the cursor disappears and cannot type issue. It seems that the issue may be not Visual Studio the VS IDE issue.
In addition, I find a similar thread about the
Expression Editor Cursor Issue,
please see:
http://www.beta.microsoft.com/VisualStudio/feedbackdetail/view/780682/vs-2012-rdlc-expression-editor-cursor-issue#.
Therefore, I suggest you could also try to press alt with left and right arrow keys and check if it is works fine.
Thnank for your understanding!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do I find my old keys, if I didnt register products,and the bar code is all thats left from school purchase?

How do I find my old Keys, If I didnt register products, and the bar code is all thats left from school?

Well, then you are SOL.
Mylenium

How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work

How can I install CS5 on a new/replacement laptop? I paid full price in 2011 and have the key (and it shows up in my Adobe account under products), but it was a downloaded product and I can't find a download of that version online and my key doesn't work in CC.

Your key cannot work in CC, it's newer version, and would require a new purchase.
Downlaod CS5 here.
Download CS5 products

My keyboard repeat key doesn't work. How do I fix it in O/S Lion?

My keyboard repeat key doesn't work. How do I fix it in O/S Lion?

The only way to get it back is with a Terminal command hack.
I don't know if it's acceptable to post here. But, a search engine is your friend.

"A" key doesn't always register

Similar Messages

Maybe you are looking for