A LIST OF BB LINK ERRORS / FIXES

I am not a developer, but just a heavy user of contacts and wired synchronisation.
I have gone through a comprehensive exercise of transferring 9000+ contacts from Outlook to Blackberry Q10 (1-way sync), and then doing a 2-way sync (which should ideally have resulted in a message "nohthing to sync; all matching already"). But in stead the following changes occured. I am listing these so you know what to expect, and can come up with your own strategies to minimise BB Link messing around your data in unintended ways.
1) BB Link replaces "%" percent symbols with "%%" double percent symbols in all the WEBSITE and NOTES fields, possibly other fields too. How bizarre! Any explanations anyone?
2) The only other change made to NOTES field was that some non-printing characters were removed: an acceptable clean-up if again a time-waster + mystery creator. (eg the end of every line used to have 2 characters before u get to the next line; not it just has one).
3) 'Email Type' and 'Email Display Address'
-where orphan values existed in Outlook (eg it had no email address but still showed "SMTP" for type, of showed some old stale 'display address') BB Link cleans this up nicely and removes them.
-where an email address exists, but Type and Display Address are missing, BB Link populates these freshly. Again nicely done.
- But this kind of minutia is probably what causes BB Link to take 1.5hrs to synch (vs few minutes for BB Desktop software before it)!!!
4) PHONE NUMBERS:
- I used to store the phone # of reception or switchboard in "work2" # and only people's direct lines in "work1" #. Now BB10 devices do not recognise "work1" and "work2" but only has first, 2nd (and third?) instances of "work #", BB Link of MOVING all Work2 #s into Work1# slot of Outlook (if you did not already have a Work1 # saved there).
- Same thing with moving Home2# to Home1#.
- Painful but hopefully a one-time mass problem if you start using the BB convention going forward.
5) STREET ADDRESS:
- Business Street and Home Street fields have generally been shifted about. BB device (or Link) try to clean up the address so that it can be more 'map search friendly' i suspect. Some parts of address data are lost in this process!!! Thanks for trying, but no thanks BB!
Now I have 500 addresses to check / correct manually!
OVERALL: because the BB Link interface is SO rubbish and you get lost in BB Link reporting 1000s of instances of "Attachement Hash field" changes you cant detect all of the above without painful checking.
Any tips or comments welcome.

@suemack902
Could be related to this:
BlackBerry Link keeps prompting for conflict resolution of "Attachment Hash" during contact synchron...
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

How can I fix an invalid sibling link error message without my original install disk?

How can I fix an invalid sibling link error message without my original install disk?

Hi Jeff,
It's not even likely the Install Disc could fix that, but if you want to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
You must repair the HD, your best bet is likely DiskWarrior.
BTW, you might enjoy these DiskWarrior review/recommendations...
http://discussions.apple.com/thread.jspa?messageID=9645801&#9645801
http://discussions.apple.com/thread.jspa?messageID=10541019#10541019
http://discussions.apple.com/thread.jspa?messageID=11918925&#11918925
http://discussions.apple.com/thread.jspa?messageID=12684129#12684129
http://discussions.apple.com/thread.jspa?messageID=12744794&#12744794
http://discussions.apple.com/thread.jspa?messageID=12912879#12912879
Finally, you should run DiskWarrior if your Mac explicitly warns you of a problem with your disk in the form of an error message. Most of these errors are reported by the built-in Disk Utility whether your Mac OS X version is 10.3 Panther, 10.4 Tiger, 10.5 Leopard, 10.6 Snow Leopard or 10.7 Lion. Here are some of the most common messages:
Disk Repair: The disk was not repairable by this computer. It is being made available to you with limited functionality. You must back up your data and reformat the disk as soon as possible.
The underlying task reported failure on exit.
Invalid node structure.
Keys out of order.
Invalid key length.
Invalid directory item count.
Invalid extent entry.
Invalid record count.
Invalid index key.
Invalid sibling link.
http://www.alsoft.com/DiskWarrior/details3.html

Safe link to fix runtime error r6034

There are several links to fix this problem without me manually doing it. Does anyone know of a safe one? I wish Apple would just make one.
Thanks

Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
http://www.apple.com/itunes/download/
(The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
If you still have the same error messages cropping up, then try the procedures from the following user tip:
Troubleshooting issues with iTunes for Windows updates

How do I fix a "Unsatisfied link error"?

ProQuest provides a Java application for auto parts. It did function on my system [10.3.9 with all updates]. After logging in on a web site, a "jnlp" file is loaded to the desktop. Double clicking this file causes another download to load the auto parts database.
But now a, JAVA error Exception reads:
java.lang.Unsatisfied Link Error: no hpwin32 in java.library.path
However a similar file "hpwin32.dll" is in: user/Library/caches/JavaWeb Start/cache/http/Depe.startekinfo.com /... /RN client-native.jar/hpwin32.dll
I deleted the "Depe.startekinfo.com " folder, but it reappeared after logging into their site.
Security is set to accept all cookies and using Safari and Firefox produces same result.
Suggestions are appreciated.
Bob
Quicksilver G4 w 2 HDs, LaCie 22 Mac OS X (10.3.9)

The default VISA timeout is 2 seconds, so your program is missing a byte and timing out. You might want to log your serial port traffic to see the actual data coming through. Portmon is a fantastic tool for debugging serial applications: http://technet.microsoft.com/en-us/sysinternals/bb896644.aspx
Regards,
Jeremy_B
Applications Engineer
National Instruments

Java language unsatisfied link error how to fix

i get a "java language unsatisfied link error" when trying to get my Weatherlink application to run on my new iMac. It ran OK on my old one. Whats up with this?

Java for OS X 2014-001

The broken link error

Hi,
Please help me with this broken link error in Office Excel 2010. Thank you.
The problem is: a broken link cannot be removed from the file. The link was used in data validation, which refers to a list of values. After the path was corrected, it still shows there’s a broken link. Here are the details:
I have 4 files named “000TVA_Test – 3”, “000TVA_Test – 4”, “000TVA_Test – 5”, and “000TVA_Test – 6”. The posterior files were developed based on the previous files.
In Test-3, sheet “Template “, cell “L4”, “O4”, “R4”… were built as dropdown list using data validation. The list source is in the “Library” worksheet. There’s no problem so far.
Test-4 was firstly copied from Test-3. In this file I renamed the worksheet from “Library” to “Setting” and the link was broken from here. I can also fix the broken link in this file. (While I didn’t realize there was a broken link.)
In Test-5 I fixed the path, but every time when opening the file, the broken link still shows.
In Test-6 I’ve removed the data validations. The broken link is still there.
I tried to find solutions online. I tried common methods, cannot find anything in the files is still using links. I also tried the “findlink.xla” add-in, but it only worked for Test-4, and couldn’t find the link in other files.
Please help. Thank you!
I uploaded files here: https://onedrive.live.com/redir?resid=1A97736E0ABBAA41!113&authkey=!AF5wAd9rwUPnYyE&ithint=folder%2cxlsm
Thanks again!

Hi,
Based on my tested the files downloaded, I found that Test-5 & Test-6 included the "A defined name that refers to an external workbook", Test-4 had not. (Please click Formula Tab>Name Manage, you'll see them.)
However, the Break Links command cannot break the following types of links:
A defined name that refers to an external workbook
A ListBox control with an input range that refers to an external workbook.
A DropDown control with an input range that refers to an external workbook.
http://support2.microsoft.com/kb/291984/en-us (It also applies to Excel 2010)
Thus, we'd better try the workaround： re-build the Test-5 & Test 6.
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Database Link Error

Here is the scenario,
1. Three databases, say DB_1, DB_2 and DB_3 are available in the system.
2. Two database links are created , say LINK_A and LINK_B where LINK_A is to connect to DB_2 from DB_1 and LINK_B is to connect to DB_3 from DB_2.
3. There is a table TABLE_1 available in DB_3 and the corresponding synonym DB3_TABLE_1 is created in DB_2. Also, a synonym DB2_DB3_TABLE_1 is created in DB_1 for the above said synonym (and not directly for the table in DB_3).
4. In SQl*Plus of DB_1 , if use select statement like
SELECT col_1, col_2...
FROM DB2_DB3_TABLE_1
works fine and gives me the result without any error but if use this same statement inside a procedure in DB_1 I couldn't compile this procedure and I'm getting the following error:
"ORA-04054: database link LINK_B does not exist"
Why is this difference? Why I'm getting this error in the procedure but not in the SQL*Plus for the same type of statement?.
Help would be appreciated.
Thanks
-Krishnamurthy

Forum software seems to be misbehaving again!!!
My reply posted on 7th Sep is shown as posted on 3rd Sep?
Lets see if it gets right this time?
How are the database links created - fixed, current, public?
Your options include to create a view on the DB_2 (and not a synonym).

My external hard drive won't mount and shows a 'sibling link error'. I've seached the forums but need a very dumbed down set of tips for the computer illiterate- help?

The forums have suggestions on this topic but I don't understand the lingo used.

Remember card catalogs in libraries? The computer has its own card catalog that tells it where all the files are. That's known as the directory.
Sibling link error indicates something is wrong with one of the cards, making the computer lost. Now the computer will put forth a bunch of gobbledy gook to fix this error, but you can do it.
Since the issue is with the external hard disk, you must select it with Disk Utility's First Aid selected. There you will repair the disk. If it can't repair the disk, you will need to use a more powerful tool. The question is, is your data backed up elsewhere, or is it not? If it is not, the same symptoms of a bad directory can also implicate a dying hard drive. You'll want a data recovery tool if you aren't backed up. If you are backed up, and there is nothing that can't be replaced on that external hard drive, get Alsoft Disk Warrior. This should fix most bad sibling link errors repair disk can't. When it can't, you can give up on the external hard disk.
P.S. Permissions has NOTHING to do with the directory. Do not worry about issues with permissions or attempting to repair it at this stage.

Invalid sibling link error

I have a 15" PB which gave an "invalid sibling link error" one month ago and I was not able to even repair it using DiskWarrior. I have Apple Care Protection plan, so I sent it for repairs and the repair guys replaced the motherboard as they suspected it was the reason. On return, I reformatted the HD and installed everything from stratch. Everything was working fine till last Saturday morning, when computer would not boot up. So I checked using Disk Utility from PB DVD, and the dreaded "invalid sibling error" came up again. Since I have a bootable backup of the HD, I formatted the HD and tried to load the system on the HD from the backup copy. But the writing of backup using CCC hung up and I had to quit it. After that I was not able to find the HD using Disk Utility from DVD.
I have sent it for repairs again, but can anyone help me understand the core problem here. Since last time they replaced the motherboard, I think they will replace the HD this time around. Is the logic board, motherboard or the HD that is the root cause of the problem?
Powerbook G4 Mac OS X (10.4.7) 100GB HDD, 1.5GB RAM

I had never heard of "invalid sibling link error" until you post, and when I ran a search on it the best explanation I could find is that it is a directory-related problem. See the following (assuming it is correct): http://www.computing.net/mac/wwwboard/forum/2584.html The suggestion there, though, is that DIsk Warrior should be able to fix the problem, and you've already told us that you tried using Disk Warrior on it and it did not work.
Very puzzling. Please post back what happens when you get your PB back from being repaired.
Good luck.
-- JDee

Patch linking error

Hi hussein,
I often encouter patch linking error like the ff:
An error occurred while relinking application programs.
Contunue as if it were successful [No] : YesAnd I always respond to it as "Yes". Is there any bad implications in doing this?
How do I manually relink the programs again.
Thanks
msk

Hi,
I can not keep track anymore which program got relink error, so adadmin relink everything?You can relink any executable file via adadmin or manually. However, I would not recommend you skip the error as the issue could be relevant to main executable files which are used by the application (for example, if the patch fails to relink "f60webmx" executable file, you will not be able to login to the application). Always try to fix the error before proceeding with the patch (unless it can be afforded).
Regards,
Hussein

JMS Sender Channel: Linked Error

Hi All,
I'm working on a synchronous JMS to Proxy scenario. I have created Sender JMS channel. In RWB, the status of the channel is error.
The error is:
Channel Error occured. Detailed error (if any): JMS error: MQJMS1024: session closed, Linked error: Error code: MQJMS1024
This channel was working fine few weeks back. Since last week we are facing this issue.
I deleted the communication channel and created a new one but the error persists.
We also tried by restarting the J2EE engine but still no change.
Also gave a try by restarting the Queue manager still there was no change.
Please provide your suggestions to solve this issue.
Regards.,
Sarvesh Desai
Edited by: Sarvesh Nispat Desai on Oct 27, 2009 12:37 PM

Hi Sarvesh,
*Are you using Websphere MQ JMS server? *
If yes check this note Note 1278718 - IBM MQ Connectivity Issues with JMS Adapter
also this error requires restarting the session
ftp://ftp.software.ibm.com/software/mqseries/fixes/wbimbfev50/fixpack03/C3466662.pdf
Regards
Suraj

Error when installing Product: BlackBerry Link -- Error 1920.

Hi I get the following installation error for Link:
Product: BlackBerry Link -- Error 1920.Service BlackBerry Link Communication Manager (RIM Tunnel Service) failed to start. Verify that you have sufficient privileges to start system services.
I get the option to retry but it won't work.
Logged on as Admin
Windows 7
BB Z10 10.0.10.85
Tried downloading from the Web and installing and connecting phone to PC. Turned off UAC.

Hey pcamp227,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Do you have any current security software on the PC? If so what kind? Also go into Start>Control Panel>Adminstrative Tools>Services and is BlackBerry Link Communication Manager listed? If so, click on start the service (make sure you're logged in as the admin).
Once completed then try to access BlackBerry Link.
Let me know if the issue still persists.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Dynamic link error while executing XQUERY in SQL*Plus

Hi,
When I'm doing the following XQUERY in SQL*Plus (version 11.2.0.3.0 instant client for mac64bit) :
XQUERY declare default element namespace "http://xmlns.oracle.com/xdb/xdbconfig.xsd"; (:
       (: This path is split over two lines for documentation purposes only.
          The path should actually be a single long line.
       for $doc in fn:doc("/xdbconfig.xml")/xdbconfig/sysconfig/protocolconfig/httpconfig/
        webappconfig/servletconfig/servlet-list/servlet[servlet-name="orawsv"]
       return $doc
I'm getting the following error:
Dynamic link error: dlopen(/Users/markbeelen/Oracle/instantclient_11_2/lib/lib/libxdb.dylib, 9): image not found
OCI-21500: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
Errors in file :
OCI-21500: internal error code, arguments: [unable to load XDB library], [], [], [], [], [], [], []
ERROR:
OCI-21500: internal error code, arguments: [unable to load XDB library], [],
Any ideas how to solve this?

Got same issue with :
Component
Version
=========
=======
Java(TM) Platform
1.6.0_41
Oracle IDE
3.2.20.09.87
Versioning Support
3.2.20.09.87
Alternate path for SqlHistory directory :
C:\Users\USER_NAME\AppData\Roaming\SQL Developer
Best Regards,
F.L.

Link error for distribution

Hi, I received an email with the link to download the new version of flash player for distribution, but does not work
Dear Miguel Ángel Abarca,
Thank you for submitting a request to distribute Adobe® Software. Your request has been approved, and you may now distribute the Adobe® Software listed below, subject to the terms and conditions set forth in the Adobe Reader and Runtime Software Distribution License Agreement.
Approved Software:
Adobe® Flash® Player
Adobe® Reader® Software
Attached is an Adobe Portable Document Format (PDF) file of the distribution license agreement. Please keep this file for your records. The agreement is valid for one year, after that one year you can renew the distribution license agreement by following the same process.
Below you will find the necessary details and download links for the product(s) that you have been approved.
Adobe® Flash® Player
To download the Flash Player version that you would like to distribute, please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=<number>

Hello, here paste part of message:
To download the Flash Player version that you would like to distribute,
please visit the following URL:
http://www.adobe.com/products/flashplayer/distribution4.html?auth=4358bc39-5e77-4893-99cf- 9f7c7a8d5456
*You may not share the above link, share information with others, or
publish the above link on websites, blogs, or by any other means that
can be publicly accessed. The information contained on this site is
meant for your use only in accordance with Adobe Flash Player
Distribution License Agreement you accepted. You may direct others to
http://www.adobe.com/products/players/fpsh_distribution1.html to request
distribution rights.
El 13/01/2015 a las 17:53, m_vargas escribió:
>
Link error for distribution
created by m_vargas <https://forums.adobe.com/people/m_vargas> in
/Installing Flash Player/ - View the full discussion
<https://forums.adobe.com/message/7091835#7091835>

JNI Unsatisfied Link Error

Hello All:
I have some java code that calls a C function in a dll. I have succesfully used the javah utility to generate the header file for my jni native implementation code and have build both the client java code as well as the dll using g++3.0 using Bloodshed Dev C++ (an open source IDE). When I go to execute the java code I get an unsatisfied link error saying my function is not recognized by the jvm. Does anyone have any suggestions on this issue?? I am using Win2k and jdk 1.4.1
Here is what I've already tried:
1) Have added the directory where the java class file as well as the dll to my PATH variable, I have even put the dll files in the jdk bin directory
2) My dll loads three other dll's and calls a function in one of those dll's, I am using the loadLibrary function to load these dll's and am using function pointers to reference the actual function in the dll
I was wondering if its a problem if I use g++ to build my dll, does the virtual machine assume by default that gcc is used, please let me know.
Any help is much appreciated
Thanks

I've looked through the various postings on this issue and have tried some or all of the suggestions that were made relevant to my problem but I still keep getting this error. As a result I am attaching some code here:
Listed below is my java code
public class DecoderAdapter
//instance vars
private static DecoderAdapter decoderAdapObj;
private String serNum="43543534654";
private Hashtable decodeInfo;
private final int DEC_SNTYPE_UNKNOWN=0;
private final int DEC_SNTYPE_ADOBE_1A=10;
private final int DEC_SNTYPE_ADOBE_1B=20;
private final int DEC_SNTYPE_ADOBE_2A=30;
private final int DEC_SNTYPE_ADOBE_2B=40;
private int serNumType;
static
     System.loadLibrary("javaWrapperProj");
public DecoderAdapter() throws UnsatisfiedLinkError
/** accessor for decodeInfo
public Hashtable getDecodeInfoHash()
     return decodeInfo;
/** mutator for decodeInfo
public void setDecodeInfoHash()
     initializeHash();
/** accessor for serial number type
public int getSerNumType()
     return serNumType;
/** mutator for serial number type
public void setSerNumType(int serNumberType)
     serNumType = serNumberType;
/** accessor for serial number
public String getSerNum()
     return serNum;
/** mutator for serial number type
public void setSerNum(String serNumber)
     serNum = serNumber;
public static void main(String[] args)
//local vars
     try
decoderAdapObj = new DecoderAdapter();
int snType=decoderAdapObj.DEC_SNTYPE_UNKNOWN;
String serialNum=decoderAdapObj.getSerNum();
decoderAdapObj.setDecodeInfoHash();
Hashtable myHash = decoderAdapObj.getDecodeInfoHash();
     decoderAdapObj.setSerNumType(decoderAdapObj.DEC_SNTYPE_UNKNOWN);
     int responseCode=decodeSerNum(snType,serialNum,myHash);
     System.out.println("The response from decoding the serial number is "+responseCode);
     System.out.println("About to call the hashtable retrieval function");
     System.out.println("The media code returned="+decoderAdapObj.decodeInfo.get("mediaCode"));
     //getHashResults();
     catch (UnsatisfiedLinkError un)
     System.out.println("Caught an unsatisfied link exception with the message="+un.getMessage());
     System.out.println("The stack trace of this error is="+un.getStackTrace());
/** This method is used
     to fill up the contents
     of the hashtable
public void initializeHash()
     decodeInfo = new Hashtable();
     decodeInfo.put("errorCode",new Integer(0));
     decodeInfo.put("mediaCode",new String("temp"));
//declaration of native method
private static native int decodeSerNum(int snType,
String serialNumberStr,
Hashtable decodeInfoHash);
The following is what gets generated by the javah utility:
/* Header for class DecoderAdapter */
#ifndef IncludedDecoderAdapter
#define IncludedDecoderAdapter
#ifdef __cplusplus
extern "C" {
#endif
/* Inaccessible static: decoderAdapObj */
* Class: DecoderAdapter
* Method: decodeSerNum
* Signature: (ILjava/lang/String;Ljava/util/Hashtable;)I
JNIEXPORT jint JNICALL Java_DecoderAdapter_decodeSerNum
(JNIEnv *, jobject, jint, jstring, jobject);
#ifdef __cplusplus
#endif
#endif
And finally the following is my C implementation file:
Date: 07/11/02 11:56
Copyright:
#include <jni.h>
#include "Decoder.h"
#include "DecoderAdapter.h"
#include <iostream.h>
#include <stdio.h>
#include <windows.h>
#include <conio.h>
typedef int (WINAPI*cfunc)(int,char *,DecodeInfo *);
JNIEXPORT jint JNICALL Java_DecoderAdapter_decodeSerNum
(JNIEnv * env, jclass currentObj, jint serialNumberType, jstring serialNumber, jobject decodeInfoHash)
HINSTANCE hLib=LoadLibrary("WCDSNDecoder.DLL");
//HINSTANCE hLib1=LoadLibrary("Kernel32.DLL");
//HINSTANCE hLib2=LoadLibrary("msvcrt.DLL");
if(hLib==NULL) {
cout << "Unable to load library!" << endl;
getch();
return 0;
//load the dll at run time
cfunc decodeSerialNumberPtr=(cfunc)GetProcAddress((HMODULE)hLib, "decodeSerialNumber");
DecodeInfo result;
//call decode serial number here
//and pass in the serial number type
//the serial number and the empty
//struct containing the serial number info
char * actualSerialNumber = const_cast<char *> (env->GetStringUTFChars(serialNumber,0));
int serType = serialNumberType;
int finalResult=decodeSerialNumberPtr(serType,actualSerialNumber,&result);
//set the results from the Decode Info struct
//int decodeSerialNumber(int serialNumberType,
// char *serialNumberFrmtd,
// DecodeInfo *serialNumInformation);
//first return the Java class object that is the type of the
//java object
jclass decoder_class = env->GetObjectClass(currentObj);
jclass decoder_hash_class = env->GetObjectClass(decodeInfoHash);
//call the put method from the native code
//on the hashtable object and pass it the necessary
//arguements
jmethodID putMethod = env->GetMethodID(decoder_hash_class,"put","(S,O)V");
jstring key = env->NewStringUTF("mediaCode");
jstring value = env->NewStringUTF(result.mediaCode);
//now do the actual call to the method
env->CallVoidMethod(decodeInfoHash,putMethod,key,value);
//release memory here
FreeLibrary((HMODULE)hLib);
env->ReleaseStringUTFChars(serialNumber,actualSerialNumber);
return finalResult;
The exact error is shown below:
Caught an unsatisfied link exception with the message=decodeSerNum
My path variable's contents is shown below:
PATH=C:\XEmacs\XEmacs-21.4.8\i586-pc-win32;C:\oracle\ora81\bin;C:\oracle\ora81\Apache\Perl\5.00503\bin\mswin32-x86;C:\Program Files\Oracle\jre\1.1.7\bin;C:\Perl\bin\;C:\WINNT\system32;C:\WINNT;C:\WINNT\System32\Wbem;C:\Perforce;C:\JRE\1.1\bin;c:\webObjectsCode\dev\LocalDeveloper\Executables;C:\djdev\bin;C:\emacs-20.7\bin;C:\jakarta-ant-1.4.1\bin;C:\J2SDK1~1.1\bin;C:\Apple\Library\Executables;C:\Apple\bin;C:\Apple\Library\JDK\bin;C:\j2sdk1.4.1\include;C:\j2sdk1.4.1\include\winnt;C:\webObjectsCode\devWO5\sn_decoder\javaWrapperWork;C:\Program Files\Common Files\Microsoft Shared\VSA\7.0\VsaEnv
Please note that I am successfully able to build a dll file.
Any help would be appreciated...

A LIST OF BB LINK ERRORS / FIXES

Similar Messages

Maybe you are looking for