A list of files changed for Update Rollup 4 for Exchange Server 2010 Service Pack 3

Hi.
Is there a list of files changed for Rollup 4?
After our RollUp installation, some files in the BIN directory still has the date of 2/5/2013 (SP3, no RollUp4), some has the date of 6/13/2013 (RollUp4)
Despite RollUp4 looks like to have been installed, Exchange Server still reports it's running "Version 14.3 (Build 123.4)"
Thanks...

Hi,
After you install an update rollup for Exchange 2010, the version of Exchange Server isn't updated to show that the update rollup is installed. This issue occurs because the version number that is displayed by the Exchange Management Console or by other
administrative mechanisms is obtained from the Exchange Server Object in Active Directory.
If you want to get the latest version of Exchange server, the article Andy provided is a good way.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Similar Messages

Any known issue reported for "Rollup 8 for Exchange Server 2010 Service Pack 2"

Hello,
Currently our servers are running with "Exchange 2010 SP2 RU7", we are planning to update the Rollup version to RU8 for SP2.
Is there any knows issues reported for "Rollup 8 for Exchange Server 2010 Service Pack 2" till now ? is it safe to update the RU8 ?
http://www.microsoft.com/en-us/download/details.aspx?id=41394

(1) I had to roll it back:
The rollup released Tuesday the 9th caused random problems with systems ranging from general slow down to operation failed errors. It didn’t impact everyone at once and seemed to take 48hrs for everyone to have a problem. Rolling
back the update and rebooting the server seemed to resolve the issue.
Issues reported before the general mailflow stopping for everyone:
Nothing major … an occasional operation failed when I hit send but, it will go thru after I hit the send button a couple of times.
A MICROSOFT OUTLOOK BOX APPEARS WITH A TRIANGLE WITH A ! INSIDE IT. THE MESSAGE SAYS THE OPERATION FAILED.
(2)
ANOTHER CODE APPEARED WHEN I TRIED TO SEND THIS E-MAIL SO I CLOSED OUTLOOK AND RE-STARTED OUTLOOK. THE MESSAGE READ, CANNOT CREATE THE E-MAIL MESSAGE BECAUSE A DATA FILE TO SEND AND RECEIVE MESSAGE CANNOT BE FOUND. CHECK YOUR SETTINGS IN THIS MICROSOFT
OUTLOOK PROFILE. IN MICROSOFT WINDOWS, CLICK CONTROL PANEL.CLICK USER ACCOUNTS AND THEN CLICK MAIL. CLICK SHOW PROFILE, AND THEN CLICK PROPERTIES.
When he tries to open an e-mail, he gets an error message.
If he tries to mark an e-mail unread, he gets a different message.
Thanks Ben

Update Rollup 7 for Exchange Server 2010 Service Pack 3 (KB2961522)

This rollups will not install and has caused multiple issues on the Windows SBS 2011.
The issues are as follows:
All Exchange and related services were stopped and had to be manually restarted.
The update fails for multiple reasons, changes every time.
I am no longer able to perform ANY updates without some sort of error code.
All Domain client computers now report Security Status as Critical, Servers as not available.
DNS does not appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
Running BPA shows no major issues
I can no longer run the WSUS server cleanup. I get a Connection Error and have to reset the node, but it soon fails again.
Shared folders may take quite a bit of time to open.
Any help would be greatly appreciated. I do have an open ticket with Microsoft and although this is rated critical I am not getting any resolution. The only thing that MS support managed to do was bring the server down for an additional day and corrupt my
EDB files so that they had to be rebuilt.

Hi,
à
All Exchange and related services were stopped and had to be manually restarted.
While the update was installed, it will automatically stop Exchange and IIS services. You may need to restart
manually.
àThe update fails
for multiple reasons, changes every time.
à
I am no longer able to perform ANY updates without some sort of error code.
Would you please let me know any of those
update-failed reasons? Meanwhile, please let me know some error code that you can get when can’t perform updates. Meanwhile, please refer to installation suggestions and tips in following article when install this update rollup.
Exchange
2010 SP3 Update Rollup 7 released and installation tips
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
àAll Domain client
computers now report Security Status as Critical, Servers as not available.
àDNS does not
appear to be properly, many internet requests from domain PC's stop with "Fix connection problems" error page.
Please check if ping the SBS server successfully from the problematic client computer via server name and ip
address. In the SBS 2011, can you access
internet successfully? In addition, please select a client computer as a test machine, re-join it to the SBS network, then check if Security Status still report as Critical. Please also run Fix my network wizard in SBS console. Any find?
Meanwhile, please refer to following article and check if can help you to
repair Windows Server Update Services.
Repair Windows Server Update Services
By the way, did you have a good backup for the server?
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Error Install Update Rollup 3 Exchange Server 2010 SP2

Hy Guys,
I have the follow troubble when i try install the Update Rollup 3 Exchange 2010 SP2 on CAS Server. The error is "The user who's currently logged on doesn't have sufficient permissions to install this package. You need at least Exchange Server Administrator
permissions on the current computer to complete the task."
I've checked the permissions of the user which run the installer and those permissiones are OK. The user belong to Domain Admin, Enterprise Admin, Exchange Organization Management groups.
I don't know what else to do. Thanks for your great help.

Hi Wilmar
Do you have PowerShell execution policy via Group Policy that could be blocking the install? If you right click the file and select "Run as Administrator"?
Can you try running the setup from an elevated command prompt?
Or you can enable logging by executing the patch like this below:
Rollup3.msp /lxv* c:\Rollup3.log
You can also look here:
http://technet.microsoft.com/en-us/library/ff772434(EXCHG.80).aspx
http://exchangeshare.wordpress.com/2009/05/30/exchange-update-rollup-installation-it-is-not-nightmare/

SBS 2011 - Update Rollup 6 for Exchange Server 2010 Service Pack 2

I wonder if I have to install this rollup, since the server is already up-to-date using Windows Update? The KB article (http://support.microsoft.com/kb/2746164/en-us) doesn't mention that.
In this article, under 'Prerequisites' it says you have to "remove all interim updates". What updates are they?
Simon

Firstly, I will do an introduction of interim update.
An interim update is a fix that resolves a problem that is considered critical to the functioning of Exchange. It is built specially for a particular service pack and Rollup. This means internally there could be loads of interim updates for a particular fix.
If you have multiple problems on a server that requires interim builds, you cannot just add a second interim build. You can only install one interim update per server. You have to get a combined interim build that included both fixes. Currently MS supports
up to 3 fixes in a combined IU. The good news is that interim builds can be seen in Add/Remove in the control panel so you do not end up checking file versions.
See more details in the following link: http://blogs.technet.com/b/mlines/archive/2008/12/30/interim-updates.aspx
That is to say, the interim update is different from Exchange Rollups
You don't have to unstall anything to apply this Roll Up. Rollup Updates are always important and should be applied. If you are running SP2 for exchange 2010 and if their a rollup available to install for exchange , my suggestion woiuld be to install as it
will keep your exchange server upto date.

Performing Exchange Server patching & service pack for mailbox server without losing some data during the rollback ?

People,
I'd like to know how can I safely apply the Exchange Server service pack or cumulative update to the Mailbox Server role (no DAG) without losing some email during the downtime and rolling back the snapshot ?
Can I do the following:
1. Stop all of the Exchange Server services.
2. Disconnect the vNIC in Mailbox server
3. Take VM snapshot
4. Apply the Exchange Server service Pack / Cumulative Update or Windows Update
5. Reboot
6. Reconnect the vNIC, if the server back online again with no issue, commit / delete the snapshot, if not, then disconnect the vNIC followed by roll back.
would that be make sense or supported from both Vmware and Microsoft http://www.vmware.com/files/pdf/exchange-2010-on-vmware-support-and-licensing-guide.pdf ?
If yu have any other suggestion, please let me know here.
Thanks in advance.

Hey AlbertWT,
I'll start off by saying that I wouldn't do it. Microsoft is explicit that snapshots are not supported with Exchange when virtualized. See below (from Exchange 2013 virtualization: Exchange 2013 Help):
Some hypervisors include features for taking snapshots of virtual machines. Virtual machine snapshots capture the state of a virtual machine while it's running. This feature enables you to take multiple snapshots of a virtual machine and then revert the virtual machine to any of the previous states by applying a snapshot to the virtual machine. However, virtual machine snapshots aren't application aware, and using them can have unintended and unexpected consequences for a server application that maintains state data, such as Exchange. As a result, making virtual machine snapshots of an Exchange guest virtual machine isn't supported.
Even if we ignore the support statement on snapshots this is still not a good idea. Here are some things to consider.
1) Cumulative updates for Exchange make changes to the Active Directory Schema. Rolling back the snapshot on the Mailbox server will not roll back the changes to AD, which could cause functional and supportability issues. See this link to give you an idea of how there are AD schema updates in every Exchange CU and service pack: Exchange 2013 Active Directory schema changes: Exchange 2013 Help
2) It is possible for email to come in during the time that you're testing the update, and if you need to roll back you would need a plan to get that email back. Third party services could work, or you could prevent email from coming into your environment completely during that time, but those are not ideal solutions.
A far better solution would be to create a lab environment that is isolated from production. You could either take clones of your Exchange and AD VMs and put them into a network fenced environment, or create a lab and import your AD structure so it matches production. I think this is a far better way to test than trying to rely on snapshots in production.
Hope that helps!
Matt

Help! oracle report out of order after update Rollup for windows 2000 sp4

hello once again
i haven't received any solution of my problem, so i am again uploading it.
----PROBLEM IS GIVEN BELOW-----
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformatted fashion. in order to print the report correctly i have to remove the patch from the windows.i have set all parameters and
defining page size in files like wide180.PRT in printers folder in oracle directory.
Is there anyway to print the report without uninstalling windows patch?
thanks

I don't have any idea about this issue. Maybe someone else on this forum can help. Meanwhile, there are couple of places you can search for this issue:
Search google for printing issues with this patch
Search Microsoft forums for Windows 2000
And if you have metalink account, search metalink forum, document/note or open a SR for this.

October 2014 update rollup for Windows Server 2012 R2 and Data Protection Manager 2012 R2

Hello all,
After installing the October 2014 update rollup for Windows Server 2012 R2 (KB2995388) on our Windows 2012 R2 Core Edition backup jobs of System State start to Fail, below the generic error:
The replica of Non VSS Datasource Writer on hostname.domain is inconsistent with the protected data source. All protection activities for this data source will fail until the replica is synchronized with consistency check.
The job was cancelled. The user either cancelled the job or modified the associated protection group.
Removing the update rollup all jobs complete without errors. Somebody is expiriencing the same issue? How can we resolve the problem?
Thnks, Andrea

Hi Andrea,
Have you installed the update 2919355?
To apply update 2995388, you must first install update 2919355 on Windows 8.1 or Windows Server 2012 R2.
According to the official website, the issue which you described is not listed as the known issue.
Please uninstall this update and continue to monitor the official website for the latest news.
Best Regards.
Steven Lee
TechNet Community Support

Update Rollup 6/7 for Exchange Server 2010 SP2

Our config :
Version 14.2 (Build 247.5)
2 Mailbox servers (DAG), 2 CAS/HUB Servers using a NLB, 2 edge
my question is the following:
can i go directly to rullp 7 without installing 2,4, 5, 6 or I have to install all rollup ?
and what's the bests practices for installing rollup ?

Hello,
You can install rollup 7 directly without installing rollup 2,4, 5, 6.
You should install rollup 7 on your Exchange 2010 server roles in the following order: Client Access/ Hub Transport ,Mailbox and Edge Transport.
Please refer to the following article to install rollup 7 on CAS Array Members. (Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does
not guarantee the accuracy of this information.)
http://exchangeserverpro.com/how-to-install-updates-on-exchange-server-2010-cas-arrays/
Please refer to the following steps to install rollup 7 on Database Availability Group Members.
=============================================================
1. Run the StartDagServerMaintenance.ps1 script on the server being updated.
2. Install the update rollup .
3. Run the StopDagServerMaintenance.ps1 script .
4. Re-balance the DAG, as needed .
Here is the article for your reference.
http://technet.microsoft.com/en-us/library/ee861125(v=exchg.141).aspx
If you have any feedback on our support, please click
here
Cara Chen
TechNet Community Support

Oracle report out of order after update Rollup for windows 2000 sp4

hi
i am having a problem in oracle report printing (2000,6i). I have installed patch "update Rollup for windows 2000 sp4" on windows 2000. now when i send report(132 column) for printing to the printer, the report fails to expand to 132 columns and data is printed in unformated fashion. in order to print the report correctly i have to remove the patch from the windows. Is there anyway to print the report without uninstalling windows patch?
thanks

Hi
first of all thanks for replying .if you mean defining page size in files like wide180.PRT in printers folder in oracle directory, off course i have set parameters. thing is that printing works fine without windows patch but it gets deteriorated after installing the patch.
Thanks

Exchange 2010 Mailbox automapping issues after updated to Rollup 5 for Exchange Server 2010 SP3

Hi,
i have problem with Outlook Uses who have Full Access on other mailbox.
An authentication window pop up very time a user start Outlook.
If i remove the access everything is ok.
if i insert manual the mailbox everything is ok
The System was for 3 days ago updated to Rollup 5 for Exchange Server 2010 SP3
Before the update, was no issue.
i will appreciated any help
Thanks

Same issue here. Ever since we installed Update Rollup 5 for SP3 Exchange 2010 mailboxes that were auto mapped are not accessible. They all get the same error.
Cannot expand the folder. The set of folders cannot be opened. The attempt to log on to the Microsoft Exchange has failed.
What I have been doing is removing the users permission, then adding them back using the noautomap switch in Powershell. After doing that, the user manually adds the mailbox and all is well.
Just a note here, I suspect it may have something to do with the version of Outlook 2010. We are running an older version here. I think only SP1 with no other incremental updates. Office is up to SP2. Also, one of the users I was working with could not access
the mailbox no matter what we tried but she can walk over to another workstation and open Outlook and access the very same mailbox so that pretty much proves its software related particularly with Outlook.
I cannot reproduce the problem on a workstation (XP) with a newer version of Outlook.
This has been wearing me out and I suspected the Update Rollup all long. Now I am confident as others are having the same problem. If you find out anything on how to fix this other than the steps above, let me know.

Installing Update Rollup 7 for Exchange Server 2010 SP3

Hi,
I have 4 Exchange servers. Two CAS and two DAG. I am currently on Rollup 2 for Exchange Server 3010 SP 3. Can I install Update Rollup 7 for Exchange Server 2010 SP3 or do I need to install a previous one first?
Thannks!
Wave~Chaser

Hi,
When I try to install Exchange 2010 SP3 roll up 7, am getting the below error:
The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may
be missing, or the upgrade may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade.
and please find below event log:
Product: Microsoft Exchange Server - Update '{A93DA06F-A5B8-4DF8-8B3F-B285E014C659}' could not be installed. Error code 1642. Windows Installer can create logs to help troubleshoot issues with installing software packages. Use the following link for instructions
on turning on logging support.
Can you please help me with this error.
Thanks

Microsoft Exchange Server 2010 SP3 update to Update Rollup 8-v2 for Exchange Server 2010 SP3

i have Microsoft Exchange Server 2010 SP3 and i would like to update to Update Rollup 8-v2 for Exchange Server 2010 SP3.
what is the best way to do so?
my current env:
Name : xxxxxxxx
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, HubTransport
Site : domain/Configuration/Sites/xxx
Name : yyyyyyyy
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/yyy
Name : cccccccc
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/ccc
Name : dddddddd
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : ClientAccess
Site : domain/Configuration/Sites/ddd
Name : iiiiiiii
Edition : Standard
AdminDisplayVersion : Version 14.3 (Build 123.4)
ServerRole : Mailbox, ClientAccess, HubTransport
Site : domain/Configuration/Sites/iii
thanks
Mayson

Consider referring to the articles below and that explains it all.
Install the Latest Update Rollup for Exchange 2010 - https://technet.microsoft.com/en-us/library/ff637981.aspx
Applying Service Pack and Rollup Updates on Exchange Server 2010 (Part 1) - http://www.msexchange.org/articles-tutorials/exchange-server-2010/management-administration/applying-service-pack-and-rollup-updates-exchange-server-2010-part1.html
Pavan Maganti ~ ( Exchange | 2003/2007/2010/E15(2013)) ~~ Please remember to click “Vote As Helpful" if it really helps and "Mark as Answer” if it answers your question, “Unmark as Answer” if a marked post does not actually answer your
question. ~~ This Information is provided is "AS IS" and confers NO Rights!!

Exchange 2010 update after Update Rollup 5 for Exchange Server 2010 (KB2407113)

Mine exchange server 2010 standard has Update Rollup 5 for Exchange Server 2010 (KB2407113) as latest update.
Can someone help me which update i can install after this, can i start with
Update Rollup 1 for Exchange Server 2010 SP1.
Many thanks in advance

My recommendation will be:
Remove update roll-up 5
Install SP1 check that everything is working
Install SP2 check that everything is working
Install SP3 check that everything is working
I think it will be risky for you to go straight to SP3.
Exchange Blog:
www.ntweekly.com
MCSA, MCSE, MCITP:SA, MCITP:EA, MCITP:Enterprise Messaging Administrator 2010,MCTS:Virtualization

Why the itunes always must sync all data another file if making update application for iphone ?

Why the itunes always must sync all data another file if making update application for iphone ?

I'm not sure I understand the question

A list of files changed for Update Rollup 4 for Exchange Server 2010 Service Pack 3

Similar Messages

Maybe you are looking for