A little help from my friends...??

Could someone please help me find the simplest way to use my Canon Legria HF G10 with my Macbook Pro's FinalCut Pro v6.0??

Watch Shane Ross's tutorial on the tapeles workflow: http://library.creativecow.net/ross_shane/tapeless-workflow_fcp-7/1
It should work for Ver. 6

Similar Messages

My drive recently had to be replaced with a new one installed by Apple they reinstalled all my stuff from my time machine. Most my programs had to be updated which I managed with a little help from my friends, but the last one that I can't solve is

My IMAC OSX 10.6.8 2.8 GHz intelcore 2Duo 4GB 800 Mhz DDR2 SDRam recently had to have its hard drive replaced by apple thy actually had to give me a larger one because mine was no longer available,They also reinstalled all my programs and data from my 2 terrabite time machine back up. I got my system home and found that I had to upgrade most of my programs which I managed with a little help from my friends, but I still have one problem that I can't solve I have a Nikon Coolpix S6 that I have Been Syncing with my Iphoto since I've got it 3 years ago and now when I place it in the cradle the program reconizes it and says that it is going to start to import the new photos the little white wheel in the center of the screen starts spinning but nothing else happens. I checked all my connections and they are goog plus I even downloaded a nikon progam just to double check the camera & cradle and it works there but it wont pair off with my IPhoto.

First go to iPhoto Preferences, look in both General and Advanced tabs to make sure that things are set to import from camera into iPhoto.
Then if that doesn't help, connect the camera and open Image Capture in your Applications > Utilities folder and see if you can use Image Capture to reset the import path from the camera to iPhoto.
Image Capture: Free import tool on Mac OS X - Macgasm
Message was edited by: den.thed
Sorry John, I didn't see your post when I clicked the reply button. Dennis

Need a little help from my friends

I have received 4 WS-C2948G L2 Switches for aproject I have been assigned to. The project is extremely thin, so I need to configure these switches by myself. When I was given the switches all I was told was the Switch Software had been cleaned off for security when I start the switch I see the switch boot from the console, but am lost from here (I have never worked with switches before). I have downloaded the 5.5(20) bin software image, but need a pointer or some help understanding a little about loading the software and interacting with the switch. While I get the console up, I can not tell that I can communicate with the switch at all. Any help would be appreciated, even if it is just a pointer to the correct publication to get me started. I have added 2 screen shots of boot if this helps. Ctrl C does not seem to stop the boot.
Thanks jt

If the switches do have a secure password configured - use the below procedure to recover the password and gain access to the cli:-
http://www.cisco.com/en/US/products/hw/switches/ps672/products_password_recovery09186a0080093e1e.shtml
Once in the switch read the below initial setup/config guide:-
http://www.cisco.com/en/US/products/hw/switches/ps606/products_configuration_guide_chapter09186a008007d102.html
HTH>

I get by with a little help from my friends...

Sorry I was listening to the Beatles when I was trying to think of a subject line.
Forgive me if this is an easy answer, I'm not a huge itunes user.
I just purchased some Rolling Stones on itunes plus, paid the 1.29. Yada, yada yada... Well later in the day I wanted to make one of the songs a ringtone and noticed it was locked and couldn't.
What am I doing wrong? I've done this before with itunes plus music...
Any Help out there is greatly appreciated...
Cullen

This is taken from the iTunes store terms of sale (which you agreed to).
*"(viii) You may not use Products as a musical "ringer" in connection with phone calls."*

EP6 Transaction iView Shortcut... need a little help from my friends

Hi All,
I've noticed an issue regarding Workplace compatibility mode when launching SAPGUI for Windows from a Transaction iView. By default Workplace compatibility is set to "true", however, we need this to be "false".
If I save the shortcut file generated by the portal and open in a text editor I can see this:
[Configuration]
Workplace=true
If I change this on my desktop to "false" and start SAPGUI it works as expected.
Anyone have any ideas how to set this property from the portal?
A fix is described for EP5 in SAP Note # 631555 but I'm finding nothing on EP6.
Help is always greatly appreciated!!
-Adam

Hi Adam,
Request your inputs please.
There is a portal iview having link to connect R/3 system (EP 6 to R/3 4.6C). When the user clicks the link in the iview, before the R/3 system opens, it gives a error saying
<b>"Not all data for SAP GUI shortcut is available. System ID is unknown, Client is unknown, Enter the missing data"</b>If I click OK, a new window opens saying <b>"New SAPGUI shortcut</b>"
In that window it is asking for descrption, SID, SAPGUI parameter, etc...
I checked the SAP system created in the portal and all the parameters including the Application host, port, system aliases, etc are fine and I can open the SAP window from the support desk.
In the iview also I checked all the settings are absolutely fine.
The GUI type is WINGUI and the How to Start SAPGUI for windows I have given SSF only.
Still I am not sure what is missing. If I change the SSF to auto the transaction opens in a new browser.
The issue is this..... EP 6.0, created a System for Dev R/3 (4.6C) and given all the required information for all possible property category like SAP client, SID, system #, port, etc, etc. system type is SAP_R3. User management, Logon method is SAPLOGONTICKETS and user mapping type is "admin, user".
No ITS information is given since we only open the session_manager of R/3 thru the iView.
This opens the R/3 most of the times. But sometimes the user gets the error.
If I use auto instead of SSF the SAP transaction is opening within the iview portal window itself. But earlier it used to open as a typical separate SAP R/3 window.
So I also changed the Drag&relate option to open in a new portal window. Now it is opening in a new window, but unlike the earlier one, the SAP windows is inside a browser window. So the create new session button and all are not active. Moreover the client is cruel enough and very particular to say they want it to open as an individual SAP R/3 window and not inside a browser.
I tried to follow note 631555, but as per that I am not able to find the SAPApplication.Transaction iveiw.
The error does not occur always and in all the systems. Thanks in advance for any help.
Regards,
P. Kumaravel.

HP Probook 4510S says "Plugged in Not Charging," little help from tech support

Hi there,
I have a two year old HP Probook 4510S that has had a ton of problems. The most recent of which was an error message every time I turned on the computer saying "Batter is critically low" and it stopped charging and said that power was 0% (it continued to work though if it was plugged in and would die immediately if the plug was removed). I replaced the battery ($108), which took about a month to receive because HP apparently sent the store the battery that goes with the new model of Probook and said it would fit in the old model (it didn't and had to be sent back). When I finally got the new battery it worked for about a day and then I noticed that the message said "Plugged in, not charging" and when the charger isn't plugged in the battery seems to deplete rapidly. Now it's at 36% and not charging.
I spoke to someone today at tech support and she said because it's out of warranty they couldn't help me, but that I should "try a friend's charger" to diagnose the problem myself, as though everyone has the same charger. When I said I didn't have access to another laptop to try another charger she just repeated that I need to try it on a different charger to see if it's a problem with the battery or the charger. But that if it's the battery and I provide them with proof of purchase they could replace that. The battery is brand new and doing the same thing as the last battery, so I doubt this is the problem. I said that I had seen messages all over the internet discussing this problem and that no one seemed to have the answer and she said "Those are on the internet, we haven't substantiated those claims." I'm shocked that HP doesn't seem to care that they get a bad reputation for offering so little help if a product is out of warranty. Because of this experience I doubt I would purchase another product from them, and I would warn others against it too. I've had more computer problems with HP than any other brand of laptop I've had or any of my friends/family have had. In the meantime, has anyone else had this problem? From the forums I've read it seems that occasionally people find solutions, but none seem to be working for me. Any insight would be much appreciated.

I did a BIOS update on my ProBook 4530s and it took care of the problem

Thanks to Don Archibald. I am not savvy to all this but will try to sort it out or get help from a friend.

Thanks to Don Archibald. I am not savvy when it comes to computers and devices but if I can't figure it out from here, I think I know a friend who can help me.

I figured this out on my own again, so no need for Apple support.

Sorry but I need a little help from yours...(vivo function on FX 5600)

Hi everybody, I've decided to post here in order to get some advices (maybe some of the moderators are not going to agree with me) from some of you (wonkanoby, Osnavi, Stu online, among others...) that I have the certainty that you could help me out here.
So here it's the message posted in the VGA MSI cards forum, but I didn't received any answers... And I'm so sorry for doing this but I don't see any other option, I really appreciate your advices, so here it's:
"Hi, I'm trying to use the VIVO function on a MSI Geforce FX 5600 but without any good result. I've installed the last WDM driver and also the lates Nvidia drivers, also the Info executable for Intel Chipset (inf, AGP), the motherboard can't asign an IRQ to the AGP (possible solution suggested by Nvidia itself to reponse to: "code 10 the device can't start"), I don't know if this mobo it's not compatible with this function or with this vid card. I'm pretty shure that I can't capture any video files without having the need of using any third part software (adobe premiere, capture solution, tv-christ, among others) and please advice me if I'm wrong, (I've tried MSI media Center deluxe without any success). The error code that the device manager shows is this(on nvidia WDM video Capture): Error code 10, the device can´t start.
Any ideas are welcome.
Here are the specs:
Pentium 4 HT 2.8 mhz 800 fsb
Intel 865gbf
DDR sdram 512 pc 3200 x 2
MSI Geforce FX 5600 128vtd VIVO
Driver 6.6.8.1
Driver WDM 2.2.0.0
Toshiba 80gb 7200rpm sata port
Audigy Gamer
Fax modem Conexant
4 Fan coolers
PSU 400 watts"

There may be an IRQ issue that the Intel crowd may be better suited to help with. You may have a device IRQ conflict, I've had this happen before and you have to look at your IRQ's for starters and look at slot population. The Creative card may be in a shared slot further complicating the issue or perhaps even the drivers are conflicting.
I suggest you tell us what slots are populated and post your IRQ's.
Go to Start>AllPrograms>Accessories>System Information~>Hardware Resources>IRQ's (Use the Edit menu to select all and copy, then post your IRQ's like this:
IRQ 0   System timer   OK
IRQ 1   Standard 101/102-Key or Microsoft Natural PS/2 Keyboard   OK
IRQ 4   Communications Port (COM1)   OK
IRQ 5   WinFast TV2000 XP WDM Audio Capture   OK
IRQ 6   Standard floppy disk controller   OK
IRQ 8   System CMOS/real time clock   OK
IRQ 9   Microsoft ACPI-Compliant System   OK
IRQ 11   NVIDIA nForce PCI System Management   OK
IRQ 12   PS/2 Compatible Mouse   OK
IRQ 13   Numeric data processor   OK
IRQ 14   Primary IDE Channel   OK
IRQ 15   Secondary IDE Channel   OK
IRQ 16   RADEON X800 XT Platinum Edition   OK
IRQ 17   WinFast TV2000 XP WDM Video Capture   OK
IRQ 18   Creative SB Audigy 2 ZS (WDM)   OK
IRQ 19   OHCI Compliant IEEE 1394 Host Controller   OK
IRQ 20   Standard Enhanced PCI to USB Host Controller   OK
IRQ 21   NVIDIA Network Bus Enumerator   OK
IRQ 22   Standard OpenHCD USB Host Controller   OK
IRQ 23   Standard OpenHCD USB Host Controller   OK

Illustrator crashes on startup and little help from Adobe support team

Hello everyone,
I would like to share here my frustation trying to install Illustrator on a Windows XP machine and the poor support I got from Adobe.
After download and installing, the application can be launched, splash screen comes, then the main window, and then it crashes with the message "Adobe illustrator CS5 has encountered a problem and needs to close. We are sorry for the inconvenience".
I opened a ticket on the customer support page with detailed information on the error, including the error log. Error signature was:
"AppName: illustrator.exe AppVer: 15.0.0.399 ModName: sccore.dll
ModVer: 4.1.23.7573 Offset: 0001b2b6"
The answer to my ticket was given 10 days (!) later was:
"You can find informations to solve the issue under:
http://kb2.adobe.com/cps/822/cpsid_82252.html"
Which drives to a big page full of various symptoms and solutions in which I am supposed to dig in order to solve the problem myself.
If you encountered such crash at launching Illustrator and found a solution, I would be very thankful that you give me some hints.
Regards,
Fred.

I've been having a similar problem recently. Purchased CS5 Web Premium upgrade last month, loaded it, worked with AI a number of times, then all of a sudden out of the blue, I have the same problem as described above. Message is Adobe Illustrator CS5 has encountered a problem and needs to close. We ar sorry for the inconvenience.
The little window that displays this problem has two options: Send error report or don't send. Here is what is odd: If I choose to ignore the window altogether and not choose either option, I am able to do things in Illustrator. I can open a file, select an object, change it, save the file... All with this annoying window floating in front of everything.
I figured something had gone corrupt so I uninstalled the entire CS5 suite, reinstalled the entire suite. Guess what... same problem. Very frustrating. If it is a fonts problem, my question would be why is only Adobe Illustrator having a problem with it and not the CS5 suite components?
Any insights would be most appreciated...
Mark

I need a little help from you experts...

I'm a young programmer with a simple question hopefully someone in here can help me out quick...
I'm designing a game on an applet that I do not intend on putting on any webpage. In the game I am tryin to add an image to use. The code that I am using works because I've seen it work before. However, I am having problems with the security stuff. The images are protected and I can't seem to bypass the security to get my images. How can I make it so there will be no compile-time error with loading the images from my own computer?? Thanks.

Hi.
If you don't intend putting it on a web page then why write an applet? Applications run without security restrictions so that would seem a better solution.
Basic info regarding signing a JAR file can be found here:
http://forum.java.sun.com/thread.jsp?forum=421&thread=530200
In the past when I want an applet to access an image I've used:
          try {
               context = getAppletContext();
               fileSource = "jar:" + getCodeBase() +
                    "classes/MoLogo.jar!/uk/co/channele/mologo/";
               i_turtle = getImage(new URL(fileSource + "turtle.png"));
               i_cat = getImage(new URL(fileSource + "cat.png"));
               icon_help = new ImageIcon(new URL(fileSource + "helpicon.png"));
          catch ( NullPointerException npex ) {
               // called from the command line
          catch (MalformedURLException mfurlex) {
               System.out.println(mfurlex);
          }When writing a Java applications I have used:
          Toolkit awTk = Toolkit.getDefaultToolkit();
         i_turtle = awTk.getImage("turtle.png");
         i_cat = awTk.getImage("cat.png");In these snippets i_turtle and i_cat are ImageS and icon_help is an ImageIcon.
Hope this helps
sjl

My Apple album discovery widget does not function correctly and I needed a little help from an expert

Hi,
I can't get my official iTunes album discovery widget from Apple.com to play audio on my website. If you hit view, it will take you to the iTunes page, which is very good, but if you press play on my website where I have the widget displayed, the buttons for play and stop move and seem to function, but no audio. I contacted Apple app software, but they said they are not responsible for their own widgets and to contact the Apple Support Community. I even put major label acts into the widget and they did not work either and I am thinking this could be a widget that just never worked correctly in the first place. I think it just needs a tweak to fix it in the code, but I can't figure anymore out.
http://widgets.itunes.apple.com/builder/ this is the link to get to Apple's widgets for itunes
this is my link on the website: http://www.woodshampoo.net/ just scroll down on the music page to check it out
Thanks,
missingsock

Hey missingrock,
Hope u get round to following this up. I had the same problem and got a quick response from sending message via phg console. They told me to install QuickTime Player and it worked fine for me. That is if your country has an iTunes Music Store.
Good Luck

I bought my ipod classic from a friend that had alot of music on it ,i lend it to my little brother that wanted to download spanish music and instead erased all my music i had on my ipod classic , HOW CAN I GET MY MUSIC BACK , PLEASSSE HELP ME ,THANK U

I BOUGHT AN IPOD CLASSIC FROM A FRIEND THAT HAD ALOT OF MUSIC ON IT , I LEND IT TO MY LITTLE BROTHER (WRONG MOVE) HE WAQNTED TO DOWNLOAD SPANISH MUSIC AND INSTEAD ERASED ALL OF MY MUSIC ON MY IPOD . HOW CAN I GET MY MUSIC BACK IF IT WAS MY FRIEND THAT DOWNLOAED THE MUSIC . PLEASE HELP ME GET MY MUSIC BACK . MR. DESPERATED THANK YOU

Buy the songs that your friend put on the iPod that you liked. They had no right to give you the copyrighted music when they sold you the device.
tt2

Help needed, M getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem but instead I cannot login I to my itune account.

Help needed,
I am getting this message sandbox environment error no test user account, when downloading any application from iTunes, friend told me to sign out and sign in iTunes it might solve the problem , and i triyed it but still I cannot login I to my itune account. Same message keeping. Popping up, this problem started supricly today.

Take a look at the instructions here.
http://www.technogal.net/2012/03/this-is-not-test-user-account-please.html

I bought my ipad 2 from a friend I am trying to connect to my itunes on my computer and it will not recognize it. It keeps telling me that IPad cant be used because apple mobile device service is not started. can you help

I bought my IPad 2 from a friend. I have reset to clear all of his information out. I am trying to connect it to my computer to sync my itunes and I keep getting the message that my IPad can't be used because Apple Mobile Device Service is not started can anyone help with this?

I cannot find "Other" devices. I found Apple Mobile Device under Universal Bus Controllers but cannot see "recovery mode" or any other status. I use Windows Vista.
When I try to restart Apple Mobile Device Service I get the following message: "The Apple Mobile Device Service on Local Computer started then stopped. Some services stop automatically if they are not in use by other services or programs". What does this mean?
During the last 48 hours I was able to see my iPad in iTunes only one time during many attemnpts to connect . I haven't been able to see it during the llast several attempts.
Any suggestions? The standard suggestions have not worked: i.e. stop then start AMDS; tuurn off iPad and PC, then restart both and reconfrom iPad to PC; reload iTunes.

I got an ipod touch from my friend, but can't figure out how to change the apple id to get games. Help?

I got an ipod touch from my friend, but can't figure out how to change the apple id to get games. Help?

Never mind, I got this.

A little help from my friends...??

Similar Messages

Maybe you are looking for