A little help! IPod plugged in to usb but does not say "do not disconnect"
So im trying to use my mini after a couple years, it works fine. When I plug it in, it begins to charge and still workes fine. But it does not say "do not disconnect" and is not recognized by the computer. It use to work fine a coupleyears ago, could it just be my cable, or maybe my ipod wire to plug in? I dont think there is anything wrong with my usb, comments needed, thanx
Try a reset on the iPod.
Just the other day my daughter's friend's nano would charge on my Mac but not show up at all. A simple reset of the nano fixed that.
Patrick
Similar Messages
-
i tried to sync my ipad to my itunes using usb but it will say not charging,, i can sync with my ipod touch without any problem... please help..
From http://support.apple.com/kb/HT4060 :
The fastest way to charge your iPad is with the included 10W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter. When attached to a computer via a standard USB port (most PCs or older Mac computers) iPad will charge, but only when it's in sleep mode.
iPods need less power to charge them (their wall charger is half the power of the iPad's, 5W as opposed to 10W), so are more likely to charge via USB -
I forgot my password and my ipod says disabled. I tried to plug it into iTunes but my screen says cannot find device because it is locked. What do i do to restore my ipod.
Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
1. iOS- Forgotten passcode or device disabled after entering wrong passcode
2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
3. Restoring iPod touch after forgotten passcode
4. What to Do If You've Forgotten Your iPhone's Passcode
5. iOS- Understanding passcodes
6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
Forgotten Restrictions Passcode Help
You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
Also, see iTunes- Restoring iOS software. -
I just restored my ipod and backed it up but it still says connect to itunes
I just restored my ipod and backed it up but it still says connect to itunes.Help.
If the restore was successful, that is went through all the steps without errors then likely:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. . -
Everytime i plug my iphone into my computer it says device not recognized i was syncing my phone and it got interupted and has not worked since i have iphone 4 with 4.1 software lol what can i do to not lose everything
I'd start with the following document with that one:
iPhone, iPad, iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows -
Hello,
I am trying to connect my laptop to my TV. The computer flashes blue after I plug the cable in but the TV says there is no signal.
I have a Mac Book Pro 2009 and a Samsung 32" Class (31.5" Diag.) 450 Series 720p LCD HDTV (2010 model).
I am using a mini display port to VGA adapter. I have sucessfully hooked up boh devices but it stopped working after a handful of times. I was wondering if there is anything I can do to fix the problem or is my cable broken?Some things you can try.
Startup Issues - Resolve
Startup Issues - Resolve (2) -
I am using windows 7 and my 3rd gen nano is not recognized in itunes. I have followed all online troubleshooting to no avail. My ipod is recognized by windows but does not appear in itunes.
not recognized by anything: http://support.apple.com/kb/TS1369
recognized by windows, but not itunes: http://support.apple.com/kb/TS1363
solving the problem if the above does not work:http://www.instructables.com/id/What-to-do-when-iTunes-does-not-recognize-your-i Po/step1
(make sure you go to the next slides. -
My ipod shows up in itunes, but does not show up on my pc as a drive
my ipod show up in itunes - but does not show up on my pc as a drive
cannot figure out why it now doesn't show upMaybe
iOS: Unable to import photos to computer
Did it show before?
If you connect to another PC does the iPod show up in My Computer?
Have you installed only camera or scanner programs on your computer? -
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.
-
I am trying to copy and paste a 734mb film on to an 8GB usb but it keeps saying "It cannot copy as there isn't enough space". How is this possible? And how do I put the film on the usb?
Look at the USB stick in Disk Utility and check whether it may be partitioned or have other software on it taking up space.
-
why does it say im not connected to the internet when i plug my i phone in but i am connected to the internet. what do i do?
no into my labtop i have internet but for some reason when i plug my iphone into it it saids update servers could not connect to the internet please check to make sure u have internet and i do.
-
Having difficulty connecting my Ipad to FaceTime and messages. I've updated the latest software and have WI-FI/3G coverage but it keeps saying: "could not sign in, please check your network connection." Can anyone help?
Have you tried a reset? Hold down the home button along with the sleep/wake button until you see the apple, then let go.
-
IPod locked up while connected to the computer, "saying do not disconnect"
iPod locked up while connected to the computer saying "Do Not Disconnect"
Is it red? If so, then it's supposed to happen. As far as I know, there's no way around it.
-
My iPod will not charge and I need it to charge. My charger is one that I got from wal mart and its not the original. My computer will say its not a reconizable device and that it's malfunctioned. My iPod is now completly dead.. It has the charging symbol then goes off when my computer rejects it.. PLEASE HELP ME!
Try here:
iPod touch: Hardware troubleshooting -
PLEASE HELP - Ipod Showing In My Comp But Not Itunes Etc
Hi there
Can someone PLEASE help me! I am at my wits end with my Ipod.
A few weeks ago I was in the middle of listening to a song and my ipod crashed then switched itself off. Ever since then I haven't been able to get it to connect to Itunes or the Updater and it won't play anything.
When I switch the ipod on I get various errors ranging from the unhappy ipod to the folder with the exclamation mark.
When I connect my ipod to my pc an autoplay window appears and sometimes I get an error saying the drive my ipod is connected to isn't formatted.
So far I have tried the following
Reinstalled Itunes
Going into Disk Management and changing the Drive the ipod uses
Reset The Ipod
Tried Using Another USB Port
Put the Ipod Into Disk Mode
Nothing Works! After I changed the drive the ipod uses things looked promising. The Ipod was detected by the updater and it was started to restore the ipod however after a few minutes the ipod seemed to lose the connection and I got the error with the Battery icon.
Can someone please help me!"my dad pressed view and then he chose the 3rd picture thing and songs went into."
Sorry, I don't know what that means.
Have you had a chance to look through these?
USB drivers are not installed properly or are out of date.
iTunes 7 doesn't recognize the iPod.
Maybe you are looking for
-
Target Named Anchor in a Spry Collapsible Panel from a different page
Let me start by saying I have combed this forum (and others) looking for a resolution to this. I am familiar with David Powers solution on Foundationphp.com and am using that code in project to open the collapsible panel from a separate page and it
-
SQL Statement in Program Unit (function)
When I tried to create a Program Unit(function) in the Form module I have got an error message "..identifier "SALES.USER_ADMIN" must be declared.." How can I fixed it or may be some suggestions.. Thank you. FUNCTION DEF_USER_STATUS (User_Name VARCHAR
-
Premiere CC crashes immediatley when I open a project
I signed up to CC yesterday and installed Premiere. I can open the application, selected an existing project, or create a new one, however, as soon as the project loads Premiere closes down instantly with no error message. I have tried the following:
-
New dimensions not appearing in erpi
Hi, I am using erpi version 11.1.2.1 with e-business 12 and Hyperion Planning. We added 2 new dimensions in epma for the planning application and successfully deployed. I have refreshed the metadata within erpi but the new dimensions are not appearin
-
Can't connect to a local computer from Dock alias
I have two Macs, both with 10.4.1 and with two hard drives, set up on an Ethernet network via a router. Each user is an admin on the other machine and on their own. I made the other's IP address a favorite in the Connect To... dialog box, so they can