A little help needed for card drawing

i was told to write a program in java for a friend, i know almost nothing of java, and came here for help
-i need a class that draws 1 card from a 52 card deck and displays the value of the card.
-a class that will draw 5 cards from a deck of cards 9 ? A (single deck) and displays them.
thanks in advance.
again, im not a programmer, but any suggestions are helpful maybe some code to start me out.

HermTheWorm wrote:
i was told to write a program in java for a friend, i know almost nothing of java, and came here for help
-i need .....
again, im not a programmer, but any suggestions are helpful maybe some code to start me out.From your Nov 1 post: http://forum.java.sun.com/thread.jspa?threadID=5232501
hello, i am making a hall pass program for my computer programming class. i am having issues with my jcheckboxes. first off. this file reads from a .txt that just has
greg
john
...Sorry, but something about all this strikes me as being a bit odd. Maybe it's just me.

Similar Messages

Little help needed for a poor pc user

Okay, I just started using mac and I'm having a few problems that I cant figure out myself. When I downloaded a codec pack, the computer didnt recognize the .exe file and im just wondering why that is. This isnt the first time I have encountered this problem either. So, I'm just thinking that this is something that happens becuase not everybody makes mac friendly software. Can Someone please make me understand how to fix this problem?

You're not entirely stuck, if you decide to install Windows either along side Mac OS X (Boot Camp Beta) or on a virtual machine (Parallels Desktop).
Yang

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with re

Color management help needed for adobe CS5 and Epson printer 1400-Prints coming out too dark with reddish cast and loss of detail
System: Windows 7
Adobe CS5
Printer: Epson Stylus Photo 1400
Paper: Inkjet matte presentation paper with slight luster
Installed latest patch for Adobe CS5
Epson driver up to date
After reading solutions online and trying them for my settings for 2 days I am still unable to print what I am seeing on my screen in Adobe CS5. I calibrated my monitor, but am not sure once calibration is saved if I somehow use this setting in Photoshop’s color management.
The files I am printing are photographs of dogs with lots of detail I digitally painted with my Wacom tablet in Photoshop CS5 and then printed with Epson Stylus 1400 on inkjet paper 20lb with slight luster.
My Printed images lose a lot of the detail & come out way to dark with a reddish cast and loss of detail when I used these settings in the printing window:
Color Handling: Photoshop manages color, Color management -ICM, OFF no color adjustment.
When I change to these settings in printer window: Color Handling: Printer manages color. Color management- Color Controls, 1.8 Gamma and choose Epson Standard it prints lighter, but with reddish cast and very little detail and this is the best setting I have used so far.
Based on what I have read on line, I think the issue is mainly to do with what controls are set in the Photoshop Color Settings window and the Epson Printer preferences. I have screen images attached of these windows and would appreciate knowing what you recommend I enter for each choice.
Also I am confused as to what ICM color management system to use with this printer and CS5:
What is the best ICM to use with PS CS5 & the Epson 1400 printer? Should I use the same ICM for both?
Do I embed the ICM I choose into the new files I create?
Do I view all files in the CS5 workspace in this default ICM?
Do I set my monitor setting to the same ICM?
If new file opens in CS5 workspace and it has a different embedded profile than my workspace, do I convert it?
Do I set my printer, Monitor and PS CS5 color settings to the same ICM?
Is using the same ICM for all devices what is called a consistent workflow?
I appreciate any and all advice that can be sent my way on this complicated issue. Thank you in advance for your time and kind help.

It may be possible to figure out by watching a Dr.Brown video on the subject of color printing. Adobe tv
I hope this may help...............

A little help needed in message mapping

a little help needed in message mapping
I have to map one of the idoc header segments as many times as it occurs to each Idoc when using the split message funcionality
let us say we have the segment seg1 and there is a QUALF in it
<seg1>
<qualf>001</qualf>
</seg1>
<seg1>
<qualf>002</qualf>
</seg1>
then we use the vbeln to split the idoc into 2.
so if we have
<vbeln> 1 </vbeln>
and
<vbeln>2 </vbeln>
then 2 Idocs should be created like this
<Idoc>
<vbeln> 1 </vbeln>
<seg1>
<qualf>001</qualf>
</seg1>
<seg1>
<qualf>002</qualf>
</seg1>
</Idoc>
<Idoc>
<vbeln> 2 </vbeln>
<seg1>
<qualf>001</qualf>
</seg1>
<seg1>
<qualf>002</qualf>
</seg1>
</Idoc>
it is easy to create the segment by using createif with the QUALF field but my problem how to map the qualf twice for each idoc
Thanks.

UseOneAsMany is the function you need to use.
It takes three parameters:
1 --- The node you want to duplicated
2 --- How many times you want to duplicated
3 --- The context you want to place for it.
Regards
Liang

Help needed for writing query

help needed for writing query
i have the following tables(with data) as mentioned below
FK*-foregin key (SUBJECTS)
FK**-foregin key (COMBINATION)
1)SUBJECTS(table name)
SUB_ID(NUMBER) SUB_CODE(VARCHAR2) SUB_NAME (VARCHAR2)
2           02           Computer Science
3           03           Physics
4           04           Chemistry
5           05           Mathematics
7           07           Commerce
8           08           Computer Applications
9           09           Biology
2)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2) SUB_ID1(NUMBER(FK*)) SUB_ID2(NUMBER(FK*)) SUB_ID3(NUMBER(FK*)) SUBJ_ID4(NUMBER(FK*))
383           S1      9           4           2           3
384           S2      4           2           5           3
---------I actually designed the ABOVE table also like this
3) a)COMBINATION
COMB_ID(NUMBER) COMB_NAME(VARCHAR2)
383           S1
384           S2
b)COMBINATION_DET
COMBDET_ID(NUMBER) COMB_ID(FK**) SUB_ID(FK*)
1               383          9
2               383          4
3               383          2
4               383          3
5               384          4
6               384          2
7               384          5
8               384          3
Business rule: a combination consists of a maximum of 4 subjects (must contain)
and the user is less relevant to a COMB_NAME(name of combinations) but user need
the subjects contained in combinations
i need the following output
COMB_ID COMB_NAME SUBJECT1 SUBJECT2      SUBJECT3      SUBJECT4
383     S1     Biology Chemistry      Computer Science Physics
384     S2     Chemistry Computer Science Mathematics Physics
or even this is enough(what i actually needed)
COMB_ID     subjects
383           Biology,Chemistry,Computer Science,Physics
384           Chemistry,Computer Science,Mathematics,Physics
you can use any of the COMBINATION table(either (2) or (3))
and i want to know
1)which design is good in this case
(i think SUB_ID1,SUB_ID2,SUB_ID3,SUB_ID4 is not a
good method to link with same table but if 4 subjects only(and must) comes
detail table is not neccessary )
now i am achieving the result by program-coding in C# after getting the rows from oracle
i am using oracle 9i (also ODP.NET)
i want to know how can i get the result in the stored procedure itsef.
2)how it could be designed in any other way.
any help/suggestion is welcome
thanks for your time --Pradeesh

Well I forgot the table-alias, here now with:
SELECT C.COMB_ID
, C.COMB_NAME
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID1) AS SUBJECT_NAME1
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID2) AS SUBJECT_NAME2
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID3) AS SUBJECT_NAME3
, (SELECT SUB_NAME
FROM SUBJECTS
WHERE SUB_ID = C.SUB_ID4) AS SUBJECT_NAME4
FROM COMBINATION C;
As you need exactly 4 subjects, the columns-solution is just fine I would say.

File missing (file\BCD error code 0Xc0000034 help need for work!

file missing (file\BCD error code 0Xc0000034 help need for work! what can i do?
have an p 2000 notebook pc

Hi bobkunkle, welcome to the HP Forums. I understand you cannot boot passed the error you are receiving.
What is the model or product number of your notebook? What version of Windows is installed?
Guide to finding your product number
Which Windows operating system am I running?
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Help need for force to signout All session ! how...

hi
help need for force to signout All session ! how ??
Solved!
Go to Solution.

Hi and welcome to the Skype Community,
To force a signout of all instances your Skype is signed into please change your password: https://support.skype.com/en/faq/FA95/how-do-i-change-my-password
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

Help needed for THE decision

Hi everyone ☺
I’m finally planning to start recording what I play, and after some hours of wandering on the web I found some interesting possibilities. Now what I need is to decide which one is more suitable for my needs, and here comes the moment for apple discussions
Basically, I will record my own music one track/instrument at a time (I’m still not able to play more than one…and I dont’ want to spend 2.000$ to buy a 24-ins device just to record drum tracks), I’d like to have a software with built-in effects for guitar/bass/voice, integrated soundtrack possibilities (to play with video recordings), mixing options for both stereo and surround mixing, and I don’t want any card to be placed into my mac. Well, and obviously the sound quality must be pro-like…as anyone probably wants.
So, here’s what I came up with:
a) getting logic pro studio 8 and apogee duet
b) getting pro tools m-powered and mbox 2
c) getting one of the two softwares and a Monster iStudioLink Instrument cable and plug instruments directly into the mac
Now, the questions are:
if I can plug an instrument directly into my mac and control all parameters via one of the two softwares, what do tools like duet and mbox2 serve for?
In the case this tools are useful [ ☺ ], why ☺ … and which is the couple software/hardware that can best suit my needs?
I assume that every software has a proprietary file extension in which audio tracks are saved, so that it should be impossible to record an audio track with one software and edit it with another that has different functions/plugins (ex. from logic to pro tools, from pro tools to cakewalk sonar which I have on a pc etc.). Am I right, or is there any “standard”, non compressed high quality file type in which track can be saved and exported to be edited with different softwares?
I know that from this post it may easily seem that I’m a hopeless digital idiot, but I swear the situation is not really that bad so no need for the kind of explanations with drawings like the ones you find in the “for dummies” guides lol so every experts’ advice will be greatly appreciated
Neptune

Thank you Bee Jay and Pancenter for the lighting-fast and useful answers
now I am aware that an interface IS NEEDED lol (that means they are not produced without a reasons, are they?). I know Pro Tools is the industry standard but I don't like anyone/anything to tie me to their choices/interests (so that's why I was asking about Pro Tools, knowing that there's some sort of "hardware threat"). What I look for is just quality and if I understood what you both mean, as far as this aspect is concerned, Logic and Pro Tools are substantially comparable...isn't it? On the interfaces side, I already checked the Saffire ones (they seem quite good, and cross-platform use is definitely a plus), I will check the others mentioned and will let you know In fact, I didn't consider the "platform problem" but, as I wrote, I also own a PC with an Audigy 2 soundcard (midi/analog/optical/digital inputs/outputs and firewire port...not Madonna's private studio, but not as sad as Mac's little hole) and Sonar 6 Producer Edition, so that has been a really good point to ponder. And now, in the middle of this software/hardware battle...any personal suggestions based on tests/personal experience?

Little help needed on utl_file

Hi
I am trying to write a small stored procedure for recording some information to a text file, and I need a little help. However, beforehand, let me give you what I have done:
procedure create_record (order_id IN VARCHAR2) IS
l_dir VARCHAR2(10) 'c:/orders';
l_filename VARCHAR2(25) := 'orderlist';
l_datetime DATE := sysdate;
l_output utl_file.file_type;
begin
l_output := utl_file.fopen(l_dir, l_filename, 'w');
if !utl_file.fopen(l_output) THEN
utl_file.put_line(l_output, l_datetime || order_id);
utl_file.fclose(l_output);
else
utl_file.fclose(l_output);
l_output := utl_file.fopen(l_dir, l_filename, 'a');
end if;
end;
Now for questions, firstly, I am not entirely sure that the if statement for checking to see if an existing text file exists is the correct way, and would welcome some help on this, and correction.
Secondly, I need to add a second statement to the if, which if the file exists and the date on that file is the same as the system date, then to open and append some information to it, else create a new file.
Unfortunately, for me, I am not sure how to do this.
Can anyone show me how this can be done?
Thanks

Hope you can read my coding correctly.
ps: not tested
DECLARE
myFileExist BOOLEAN;
myFileLength NUMBER;
myFileBlockSize BINARY_INTEGER;
myText VARCHAR2(1000):= NULL;
myInstr NUMBER;
l_dir VARCHAR2(10) 'c:/orders';
l_filename VARCHAR2(25) := 'orderlist';
l_datetime DATE := trunc(sysdate);
l_output utl_file.file_type;
BEGIN
utl_file.fgetattr(l_dir, l_filename, myFileExist, myFileLength, myFileBlockSize);
if not myFileExist then -- file not exist
<ul>l_output := utl_file.fopen(l_dir, l_filename, 'w');
utl_file.put_line(l_output, l_datetime || order_id);</ul>
else --file exist
<ul>
l_output := utl_file.fopen(l_dir, l_filename, 'r');
LOOP
<ul>
--------------------------------------------------------------------start loop
UTL_FILE.GET_LINE(l_output,myText) ;
SELECT instr(UPPER(myText),UPPER(trunc(SYSDATE))) into myInstr FROM dual;
IF myText IS NULL THEN
<ul>
EXIT;
</ul>
END IF;
if myInstr > 0 then
<ul>
utl_file.fclose(l_output);
l_output := utl_file.fopen(l_dir, l_filename, 'a');
</ul>
else
<ul>
utl_file.fclose(l_output);
l_filename:='newfilename';
l_output := utl_file.fopen(l_dir, l_filename, 'w');
</ul>
end if;
--------------------------------------------------------------------end loop
</ul>
END loop;
utl_file.put_line(l_output, l_datetime || order_id);
</ul>
end if;
utl_file.fclose(l_output);
END;
Edited by: Lie Ching Te on 12-Feb-2010 12:34 PM
Edited by: Lie Ching Te on 12-Feb-2010 1:01 PM

A little help needed???

Hi all... Extreme Newb here.... I have been dragged into the
scary world of flash kicking and screaming all the way.. I am
photoshop junkie that has been brought into a website makeover for
a friend.. I need help creating a page that works very similar to
this link
http://www.yamaha-motor.com/sport/products/modelinnovation/6/0/innovation.aspx
{not sure if the rules of this fourm allow for link examples I am
sorry if they are frowned on} thought it would be the quickest way
to explain what I am after...
I am looking to create a simple action when the mouse rolls
over a hot square... I need for a seperate image to appear on the
stage with a bit of text and on rollout disappear.. It all seems
simple enough but I can't find any info on this either in book form
or web help.... Any suggestion or help would be greatly
appreciated..
Thanks inadvance!!!
Frostbyte

A very simple, no code, method for showing something on a
rollover event is to use a button symbol. Create a new button
symbol. This will open the editor. If you look at the timeline for
the button, you'll see that there are only four frames available.
In the existing layer, draw the target that you want to use to
trigger the rollover. If you are using text or an open object, to
to the last frame and add a new keyframe. Draw a filled object to
cover the whole target image. What you draw in the last frame is
the area that will define the hit target of the button.
Add a new layer. and place a keyframe in the second frame of
this new layer. Add another keyframe to the third fram of this
layer. Use the space in the second frame of this second layer for
the content that you want to show when the target is rolled over.
The cross hair at the center of the window will be the
registration point for the button, place the rollover content so
that it appears in the location that you want.
That should get you started.

Help needed for assignment????

Hi there everbody! Well I'm quite new to this, therfore I would greatly appreciated if some1 could help me with my assignment.
Assignment:Make a Game applet that makes an object(red oval) move around the applet window by using only four buttons(Up, Right, Down, Left).
I managed to do the button and the oval but both are not connected. Can some1 help me with the codes coz my assignment is due this week!!
Here are what I've already done:
import java.awt.*;
import java.awt.event.*;
import java.applet.*;
public class Game extends Applet implements ActionListener{
Button up1 = new Button("Up");
Button down1 = new Button("Down");
Button right1 = new Button("Right");
Button left1 = new Button("Left");
public void init() {
Panel p = new Panel(new GridLayout(3, 3));
p.setBackground(Color.white);
p.add(new Label(""));
p.add(up1);
up1.addActionListener(this);
p.add(new Label(""));
p.add(left1);
left1.addActionListener(this);
p.add(new Label(""));
p.add(right1);
right1.addActionListener(this);
p.add(new Label(""));
p.add(down1);
down1.addActionListener(this);
add(p);
public void actionPerformed(ActionEvent event) {
repaint();
public void paint(Graphics g) {
Font font = new Font("serif", Font.BOLD, 20);
g.setColor(Color.black);
g.setFont(font);
g.drawString("Click on button to move the object.",80,350);
Color c = Color.red;
g.setColor(c);
g.fillOval(200, 150, 155, 95);
As for the "g.fillOval(200, 150, 155, 95);" my lecturer told me that I should not use fix variables and I have to find out what the variables are so that the oval could move in the applet window upon clicking at the four buttons....I would be greatly appreciated if some1 could help me...

Hi the main thing is you will need 2 classes, one for the applet, and one for the drawing panel.
You create a class that extends Panel, call it PaintPanel and override paint(), which is where you do the drawing.
In the applet you add your buttons, and the PaintPanel. When the buttons are clicked they change the state in the DrawPanel.
The big thing to remember is you don't override paint() in the applet, only in your PaintPanel.

A little help needed with AppleScript

Hi:
I need a little help with AppleScript.
I created an AppleScript application to copy some files to a LAN disk that I always have mounted. The application works fine, except that it creates some sort of a lock that prevents me from doing other work with the Finder until the copy process is completed.
If anyone has any ideas for how I can disable this lock, please let me know. I have included the source code of my script below.
Thanks,
-AstraPoint
===== source code =====
with timeout of 1500 seconds
tell application "Finder"
activate
set current_date to (do shell script "date '+%Y-%m-%d at %H-%M-%S'") as string
set name_p to "Personal Data " & current_date & ".dmg"
set name_d to "Documents " & current_date & ".dmg"
(* copy the target files to another local disk - to create an extra backup *)
duplicate file "Personal Data.dmg" of folder "File Backups" of disk "Macintosh HD" to folder "Ad Hoc Backups" of disk "Macintosh HDx" replacing yes
set the name of file "Personal Data.dmg" of folder "Ad Hoc Backups" of disk "Macintosh HDx" to name_p
duplicate file "Documents.dmg" of folder "File Backups" of disk "Macintosh HD" to folder "Ad Hoc Backups" of disk "Macintosh HDx" replacing yes
set the name of file "Documents.dmg" of folder "Ad Hoc Backups" of disk "Macintosh HDx" to name_d
(* mount remote disk/folder using the alias file on our desktop *)
open alias file "disk HD5"
(* copy the target files to a remote disk - to create an extra backup *)
duplicate file name_p of folder "Ad Hoc Backups" of disk "Macintosh HDx" to folder "Bkup" of disk "HD5" replacing yes
duplicate file name_d of folder "Ad Hoc Backups" of disk "Macintosh HDx" to folder "Bkup" of disk "HD5" replacing yes
end tell
end timeout

Try:
ignoring application responses
Documented [here|http://developer.apple.com/library/mac/#documentation/AppleScript/Concept ual/AppleScriptLangGuide/reference/ASLRcontrolstatements.html].
Message was edited by: xnav

Query help needed for querybuilder to use with lcm cli

Hi,
I had set up several queries to run with the lcm cli in order to back up personal folders, inboxes, etc. to lcmbiar files to use as backups. I have seen a few posts that are similar, but I have a specific question/concern.
I just recently had to reference one of these back ups only to find it was incomplete. Does the query used by the lcm cli also only pull the first 1000 rows? Is there a way to change this limit somwhere?
Also, since when importing this lcmbiar file for something 'generic' like 'all personal folders', pulls in WAY too much stuff, is there a better way to limit this? I am open to suggestions, but it would almost be better if I could create individual lcmbiar output files on a per user basis. This way, when/if I need to restore someone's personal folder contents, for example, I could find them by username and import just that lcmbiar file, as opposed to all 3000 of our users. I am not quite sure how to accomplish this...
Currently, with my limited windows scripting knowledge, I have set up a bat script to run each morning, that creates a 'runtime' properties file from a template, such that the lcmbiar file gets named uniquely for that day and its content. Then I call the lcm_cli using the proper command. The query within the properties file is currently very straightforward - select * from CI_INFOOBJECTS WHERE SI_ANCESTOR = 18.
To do what I want to do...
1) I'd first need a current list of usernames in a text file, that could be read (?) in and parsed to single out each user (remember we are talking about 3000) - not sure the best way to get this.
2) Then instead of just updating the the lcmbiar file name with a unique name as I do currently, I would also update the query (which would be different altogether): SELECT * from CI_INFOOBJECTS where SI_OWNER = '<username>' AND SI_ANCESTOR = 18.
In theory, that would grab everything owned by that user in their personal folder - right? and write it to its own lcmbiar file to a location I specify.
I just think chunking something like this is more effective and BO has no built in back up capability that already does this. We are on BO 4.0 SP7 right now, move to 4.1 SP4 over the summer.
Any thoughts on this would be much appreciated.
thanks,
Missy

Just wanted to pass along that SAP Support pointed me to KBA 1969259 which had some good example queries in it (they were helping me with a concern I had over the lcmbiar file output, not with query design). I was able to tweak one of the sample queries in this KBA to give me more of what I was after...
SELECT TOP 10000 static, relationships, SI_PARENT_FOLDER_CUID, SI_OWNER, SI_PATH FROM CI_INFOOBJECTS,CI_APPOBJECTS,CI_SYSTEMOBJECTS WHERE (DESCENDENTS ("si_name='Folder Hierarchy'","si_name='<username>'"))
This exports inboxes, personal folders, categories, and roles, which is more than I was after, but still necessary to back up.. so in a way, it is actually better because I have one lcmbiar file per user - contains all their 'personal' objects.
So between narrowing down my set of users to only those who actually have saved things to their personal folder and now having a query that actually returns what I expect it to return, along with the help below for a job to clean up these excessive amounts of promotion jobs I am now creating... I am all set!
Hopefully this can help someone else too!
Thanks,
missy

Help needed for using BASIC authentication through JDBCRealm

Help needed.
Hello,
I am doing a degree project, so far it works fine in my local machine, I need to try it on my virtual hosting (as it is a live server).
My project requires JDBCRealm, that is BASIC authentication loading access data from mysql database. Normally this setup can be done in Server.xml file, because my Tomcat hosting is a virtual one, I only have permission to access the web.xml file.
My question is: is it possible to get it done in an alternative way? In web.xml? Some properties file maybe?
Thank you very much.

You can set this up for your context using META-INF/context.xml instead of working with server.xml.
Make a directory called META-INF under your webapp ( it'll be at the same level as WEB-INF ). Under this, add a context.xml with all your context specific configuration including the realm. A sample is below
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/myApp" reloadable="true">
    <Realm
        className="org.apache.catalina.realm.JDBCRealm"
        driverName="com.microsoft.jdbc.sqlserver.SQLServerDriver"
        connectionURL="jdbc:microsoft:sqlserver://127.0.0.1:1433;DatabaseName=myDB;SelectMethod=Cursor;"
        connectionName="username" connectionPassword="password"
        digest="MD5" userTable="users" userNameCol="userid" userCredCol="userpassword"
        userRoleTable="user_roles" roleNameCol="rolename"
    />
</Context>Hope this helps.
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
----------------------------------------------------------------

W530 SSD and Memory help needed for high performance systems.

Hi Guys,
After dealing with lots of laptops that got destroyed by daily use, our organizations is considering ordering 25 Thinkpad W530 laptops from Lenovo and we hope that they last a little longer.
Our main usage is video editing and design so we have chosen the best that Lenovo has to offer as far as hardware.
Since Lenovo charges arm and a leg for SSD and 16GB memories, we have decided to purchase these separately and upgrade ourselves.
Knowing the high need for performance, what would you recommend for 128GB SSD and 16GB memory?
The laptops are all coming with 7200 RPM drives for storage so the SSD is mainly for programs and the OS.
For the drive bay, does this part sound right to you? http://shop.lenovo.com/us/itemdetails/0A65623/460/89555ADB1CE946DA80E0E5D6FE77B164
This would be used for the HDD and the SSD would be moved to main HDD location.
Is there anything else we should know about these laptops?
Thank you in advanced for your time and all suggestions are welcomed.
Cheers,
Chris
Solved!
Go to Solution.

I installed 32GB (4x8GB) of Corsair Vengeance RAM, and it has been working wonderfully since day 1.
Thinkpad W530, i7-3720QM, 1920x1080 screen, 32GB RAM, dual SSDs (Samsung 830, Crucial M4 mSATA), Quadro K2000M, 9-cell battery, DVD burner, backlit keyboard, Bluetooth, Intel 6300 wireless card

A little help needed for card drawing

Similar Messages

Maybe you are looking for