A little help with RAM please...
Okay, I'm just going to say - I'm noobing this up and can't figure out what to buy, or do, to get what I want.
I just picked up a cheap Intel Core Duo 2 E8200 for my office PC:
MSI Neo3 P45 FR
(old CPU) Intel Pentium Dual Core E2180
OCZ Reaper HPC Edition 2x1GB DDR2800 4-4-4-15 @ 2.1v (stock settings)
http://www.ocztechnology.com/products/memory/ocz_ddr2_pc2_6400_reaper_hpc_edition
Seagate 500GB 7200.12 SATA II HDD
Radeon HD 4850 512MB
(that should be all the info needed for my problem.)
When I had the E2180, I ran the RAM fine at 800mhz in Dual Channel. I got a WEI of 5.0 for the CPU and 5.0 for the RAM. When I upgraded my processor, the processor runs at 1333FSB (333mhz) and my WEI jumped for the CPU 6.2 and 5.5 for the RAM. I'd like (if possible) to get this RAM to run a bit faster, or buy RAM that will match my CPU 1:1 if possible.
I read the stickie above about DDR2 1066 RAM and how some is OC'ed DDR2 800. I take it my RAM is OC'ed stock because of the 2.1v requirement. What RAM would you guys recommend to reach 1333mhz to match my CPU? And how can I determine for future reference what RAM would be able to match it since I saw they don't sell DDR2 1333?
Hey guys, hey.
I've been away and sort of busy, but have tried some of the recommendations about using my RAM.
I ran into another wall. I guess my motherboard is designed for 1.8v RAM, I have 2.1v RAM. I can't seem to mess around with the timings or stuff without it BSODing, not posting, or not booting into Windows 7.
Is there any info on 2.1v RAM being used on a 1.8v motherboard? I wanted to upgrade the RAM, had a spare set of 2x1GB RAM, but I can't get it to post with more than 3 sticks, and I can't get windows to boot with more than 2 sticks. At this point it more of an experiment than raw performance.
RAM:
Set 1 (currently in, working fine no issues, timings set manually, voltage set manually)
OCZ 2x1GB DDR2 800 2.1v 4-4-4-15
Set 2 (just lying round, it use to BSOD me a lot, never figured out why, swapped it out, PC worked fine, RAM was used in another computer worked fine, timings/volts always set manually)
Corsair 2x1GB DDR2 800 2.1v 4-4-4-12
Note: I tried this RAM by itself again, it posted, loaded up Windows, but I didn't try it long enough to see if it would BSOD me. Without settings set manually or all on auto, system wouldn't POST just endless on-off cycle.
System:
Windows 7 HP
Intel E8200 - Stock
Seagate 7200.12 500GB
MSI HD 4850 512mb (first revision)
MSI P45 Neo3-FR r1.0 Bios 1.9
Antec 12EPV TruPower 550 (33A @ single rail 12v)
Onboard audio/LAN
Lite-On SATA multi-drive
Like I said, at this point it is an experiment. With the economy I'd like to squeeze a little more juice if possible out of my Rig, if not it will have to wait till I can upgrade to a Lynnfield.
Similar Messages
-
( K7N2G-L ) Help with ram Please guys
Hi,
Basically, i need some help in finding some ram that is gonna work with my board.
For quite a while now i have had 2 x 512 Pc2700 sticks of crucial and a stick of 256 pc2700 crucial all working happily together in my board @ 166 mhz fsb . But all that ram is going in a computer i am building for someone as is my current xp2400 cpu . What is replacing it is a xp3000 and i was going to use a 1gb pc3200 dual channel twinmoss set but the board don't seem to want to know about it, and that is now being rma'd.
So as i refuse to pay the premium for corsair or ocz ram or buy generic shite that leaves me with either some adata ram (don't know much about this) some geil (which i fancy) but don't know if it will work, or some more crucial but this time pc3200, but they only have that at cas 3 , which is quite slow imo, but the benifit of the crucial being that it will more than likely work.
Decisions decisions, so can anyone help me here ??Maxp0w2h,
If you skimp on RAM you will get nothing but headaches with nForce. If you live in the U.S. do yourself a favor and get the Mushkin Level II Black RAM. It is 100% Rock Solid Stable with nForce.
Take care,
Richard -
Really really little help with clientListener please
Hello.
A sample page:<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="clist.jsf" id="d1">
<f:facet name="metaContainer">
<af:resource type="javascript">
function foo() {
alert('goo');
</af:resource>
</f:facet>
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb3" partialSubmit="true">
<af:clientListener type="action" method="foo()"/> <!-- or type="click" or anything -->
</af:commandButton>
</af:form>
</af:document>
</f:view>Why do I see 'goo' alert just on page start?
JDev 11.1.2.3, WLS 10.3.5Ok, raykdogs is right and changing to method="foo" helps, but still fails if I add a parameter.
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="clist.jsf" id="d1">
<f:facet name="metaContainer">
<af:resource type="javascript">
function foo(p) {alert('goo '+p);}
</af:resource>
</f:facet>
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb3" partialSubmit="true" >
<af:clientListener type="action" method="foo('hello')"/>
</af:commandButton>
</af:form>
</af:document>
</f:view>
Puthanampatti, moved the tag to the bottom.
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="clist.jsf" id="d1">
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb3" partialSubmit="true" >
<af:clientListener type="action" method="foo('hello')"/>
</af:commandButton>
</af:form>
<f:facet name="metaContainer">
<af:resource type="javascript">
function foo(p) {alert('goo '+p);}
</af:resource>
</f:facet>
</af:document>
</f:view>Same result.
dvohra16, if I got it correctly, removed <f:facet name="metaContainer"> and </f:facet>:
<?xml version='1.0' encoding='UTF-8'?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<f:view xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces/rich">
<af:document title="clist.jsf" id="d1">
<af:form id="f1">
<af:commandButton text="commandButton 1" id="cb3" partialSubmit="true" >
<af:clientListener type="action" method="foo('hello')"/>
</af:commandButton>
</af:form>
<af:resource type="javascript">
function foo(p) {alert('goo '+p);}
</af:resource>
</af:document>
</f:view>Same. -
Need a little help with bookmarks please
hi folks. in my old days of windows internet explorer favorites i could put the list of favorite websites in the order i wanted from top to bottom. when i click on popular in safari i haven't found a way to do that. can anyone help? in other words i want the bookmark that is currently at the bottom of the list to be closer to the top. thanks for any help.
HI,
Just drag the Bookmarks in the order you want them.
You can create a "collection" of Bookmarks in a folder, drag that folder to the Desktop where the Finder will automatically alphabetize them then drag the folder back to the Safari window.
How to manage Safari Bookmarks
More help here: http://osxhelp.com/mastering-safari-learning-now-to-manage-and-tame-your-bookmar ks/
Carolyn -
I would really appreciate some help with my search & results page that is now throwing up the following error:
Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line (the line number refers to the following code:
mysql_free_result($RSsearchforsale);
mysql_free_result($RsSearchForSale2);
mysql_free_result($RsSearchForSale3);
mysql_free_result($RsSearchForSale4);
I am new to php and am setting up a dynamic site in Dreamweaver (thanks to the Missing Manual – very helpful). I apologise in advanced for my lengthy description of the problem (perhaps get yourself a drink before continuing!)
I have a Search page with 4 list menus where the user can select an option from ANY or ALL of the menus, if a menu is not selected the value posted to the results page will be 'zzz'.
On the results page I have 4 recordsets, all getting the correct results, only one recordset is required to run depending on how many of the menus from the search page have been selected and a test is run before executing the sql using a SWITCH statement checking how many of the menus had passed the 'zzz' values from the Search page if you see what I mean. The results page has Repeating Regions, Recordset Paging and Display Record Count. The exact result that I require are generated by this method.
THE PROBLEM, when a user makes a selection the first page of 10 results is fine, but the error message above is shown at the bottom of the page, AND when the user clicks NEXT to go to the next page of results THERE ARE NO RESULTS.
This is exactly what happens depending on how many menus selected and which recordset is used:
4 menus selected from Search: runs RSsearchforsale, results correct but 3 error messages on 1st page relating to mysql_free_result($RsSearchForSale2),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct results found. NEXT page is empty of results and still shows the correct display record count as if it should be displaying the records, also has the same 3 error messages.
3 menus selected from Search: runs RsSearchForSale2, results correct but 3 error messages on 1st page relating to mysql_free_result($RSsearchforsale),mysql_free_result($RsSearchForSale3), & mysql_free_result($RsSearchForSale4). The display record count shows correct number of results. NEXT page shows results from the DEFAULT setting of the recordset and the Display record count reflects this new set of results. Also still shows the 3 mysql_free_results for RsSearchForSale2, 3 and 4.
2 menus selected from Search: runs RsSearchForSale3, results correct but 2 error messages on 1st page relating to mysql_free_result($RSsearchforsale) & mysql_free_result (RsSearchForSale4). The display record count is correct. NEXT page does exactly the same as described in above 3 menus selected.
1 menu selected from search: runs RsSearchForSale4, results correct but 1 error meaasge on 1st page, mysql_free_result($RSsearchforsale). Display record count is correct and again when NEXT page is selected does as described in above where 2 or 3 menus selected.
If you have gotten this far without falling asleep then thank you and well done! I have pasted my code below and I know its a lot to ask but please please can you give me an idea as to where or why I have gone wrong. I felt I was so close at perfecting this search and have been working on it for weeks now. I feel sure the problem is because I have 4 recordsets on the page but I could find no other way to get the exact results I wanted from the menus.
Looking forward to any help.
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RSsearchforsale = 10;
$pageNum_RSsearchforsale = 0;
if (isset($_GET['pageNum_RSsearchforsale'])) {
$pageNum_RSsearchforsale = $_GET['pageNum_RSsearchforsale'];
$startRow_RSsearchforsale = $pageNum_RSsearchforsale * $maxRows_RSsearchforsale;
$varloc_RSsearchforsale = "mpl";
if (isset($_POST['location'])) {
$varloc_RSsearchforsale = $_POST['location'];
$vartype_RSsearchforsale = "vil";
if (isset($_POST['type'])) {
$vartype_RSsearchforsale = $_POST['type'];
$varprice_RSsearchforsale = "pr9";
if (isset($_POST['price'])) {
$varprice_RSsearchforsale = $_POST['price'];
$varbed_RSsearchforsale = "b5";
if (isset($_POST['beds'])) {
$varbed_RSsearchforsale = $_POST['beds'];
switch (true) {
case ($varloc_RSsearchforsale != 'zzz' && $vartype_RSsearchforsale != 'zzz' && $varprice_RSsearchforsale != 'zzz' && $varbed_RSsearchforsale != 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RSsearchforsale = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s AND price=%s AND type=%s AND beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc_RSsearchforsale, "text"),GetSQLValueString($varprice_RSsearchforsale, "text"),GetSQLValueString($vartype_RSsearchforsale, "text"),GetSQLValueString($varbed_RSsearchforsale, "text"));
$query_limit_RSsearchforsale = sprintf("%s LIMIT %d, %d", $query_RSsearchforsale, $startRow_RSsearchforsale, $maxRows_RSsearchforsale);
$RSsearchforsale = mysql_query($query_limit_RSsearchforsale, $propertypages) or die(mysql_error());
$row_RSsearchforsale = mysql_fetch_assoc($RSsearchforsale);
if (isset($_GET['totalRows_RSsearchforsale'])) {
$totalRows_RSsearchforsale = $_GET['totalRows_RSsearchforsale'];
} else {
$all_RSsearchforsale = mysql_query($query_RSsearchforsale);
$totalRows_RSsearchforsale = mysql_num_rows($all_RSsearchforsale);
$totalPages_RSsearchforsale = ceil($totalRows_RSsearchforsale/$maxRows_RSsearchforsale)-1;
$queryString_RSsearchforsale = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RSsearchforsale") == false &&
stristr($param, "totalRows_RSsearchforsale") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RSsearchforsale = "&" . htmlentities(implode("&", $newParams));
$queryString_RSsearchforsale = sprintf("&totalRows_RSsearchforsale=%d%s", $totalRows_RSsearchforsale, $queryString_RSsearchforsale); } ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale2 = 10;
$pageNum_RsSearchForSale2 = 0;
if (isset($_GET['pageNum_RsSearchForSale2'])) {
$pageNum_RsSearchForSale2 = $_GET['pageNum_RsSearchForSale2'];
$startRow_RsSearchForSale2 = $pageNum_RsSearchForSale2 * $maxRows_RsSearchForSale2;
$varloc2_RsSearchForSale2 = "mpl";
if (isset($_POST['location'])) {
$varloc2_RsSearchForSale2 = $_POST['location'];
$varprice2_RsSearchForSale2 = "p9";
if (isset($_POST['price'])) {
$varprice2_RsSearchForSale2 = $_POST['price'];
$vartype2_RsSearchForSale2 = "vil";
if (isset($_POST['type'])) {
$vartype2_RsSearchForSale2 = $_POST['type'];
$varbed2_RsSearchForSale2 = "b5";
if (isset($_POST['beds'])) {
$varbed2_RsSearchForSale2 = $_POST['beds'];
switch (true) {
case ($varloc2_RsSearchForSale2 == 'zzz'):
case ($varprice2_RsSearchForSale2 == 'zzz'):
case ($vartype2_RsSearchForSale2 == 'zzz'):
case ($varbed2_RsSearchForSale2 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale2 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s AND type=%s) OR (location=%s AND price=%s AND beds=%s) OR (location=%s AND type=%s AND beds=%s) OR (price=%s AND type=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varloc2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"),GetSQLValueString($varprice2_RsSearchForSale2, "text"),GetSQLValueString($vartype2_RsSearchForSale2, "text"),GetSQLValueString($varbed2_RsSearchForSale2, "text"));
$query_limit_RsSearchForSale2 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale2, $startRow_RsSearchForSale2, $maxRows_RsSearchForSale2);
$RsSearchForSale2 = mysql_query($query_limit_RsSearchForSale2, $propertypages) or die(mysql_error());
$row_RsSearchForSale2 = mysql_fetch_assoc($RsSearchForSale2);
if (isset($_GET['totalRows_RsSearchForSale2'])) {
$totalRows_RsSearchForSale2 = $_GET['totalRows_RsSearchForSale2'];
} else {
$all_RsSearchForSale2 = mysql_query($query_RsSearchForSale2);
$totalRows_RsSearchForSale2 = mysql_num_rows($all_RsSearchForSale2);
$totalPages_RsSearchForSale2 = ceil($totalRows_RsSearchForSale2/$maxRows_RsSearchForSale2)-1;
$queryString_RsSearchForSale2 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale2") == false &&
stristr($param, "totalRows_RsSearchForSale2") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale2 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale2 = sprintf("&totalRows_RsSearchForSale2=%d%s", $totalRows_RsSearchForSale2, $queryString_RsSearchForSale2);
}?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale3 = 10;
$pageNum_RsSearchForSale3 = 0;
if (isset($_GET['pageNum_RsSearchForSale3'])) {
$pageNum_RsSearchForSale3 = $_GET['pageNum_RsSearchForSale3'];
$startRow_RsSearchForSale3 = $pageNum_RsSearchForSale3 * $maxRows_RsSearchForSale3;
$varloc3_RsSearchForSale3 = "mpl";
if (isset($_POST['location'])) {
$varloc3_RsSearchForSale3 = $_POST['location'];
$varprice3_RsSearchForSale3 = "p9";
if (isset($_POST['price'])) {
$varprice3_RsSearchForSale3 = $_POST['price'];
$vartype3_RsSearchForSale3 = "vil";
if (isset($_POST['type'])) {
$vartype3_RsSearchForSale3 = $_POST['type'];
$varbed3_RsSearchForSale3 = "b5";
if (isset($_POST['beds'])) {
$varbed3_RsSearchForSale3 = $_POST['beds'];
switch (true) {
case ($varloc3_RsSearchForSale3 == 'zzz' && $varprice3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($vartype3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz' ):
case ($varbed3_RsSearchForSale3 == 'zzz' && $varloc3_RsSearchForSale3 == 'zzz'):
case ($varloc3_RsSearchForSale3 == 'zzz' && $vartype3_RsSearchForSale3 == 'zzz'):
case ($varprice3_RsSearchForSale3 == 'zzz' && $varbed3_RsSearchForSale3 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale3 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE (location=%s AND price=%s) OR (location=%s AND type=%s) OR (location=%s AND beds=%s) OR ( type=%s AND beds=%s) OR (price=%s AND type=%s) OR (price=%s AND beds=%s) ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varloc3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($vartype3_RsSearchForSale3, "text"),GetSQLValueString($varprice3_RsSearchForSale3, "text"),GetSQLValueString($varbed3_RsSearchForSale3, "text"));
$query_limit_RsSearchForSale3 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale3, $startRow_RsSearchForSale3, $maxRows_RsSearchForSale3);
$RsSearchForSale3 = mysql_query($query_limit_RsSearchForSale3, $propertypages) or die(mysql_error());
$row_RsSearchForSale3 = mysql_fetch_assoc($RsSearchForSale3);
if (isset($_GET['totalRows_RsSearchForSale3'])) {
$totalRows_RsSearchForSale3 = $_GET['totalRows_RsSearchForSale3'];
} else {
$all_RsSearchForSale3 = mysql_query($query_RsSearchForSale3);
$totalRows_RsSearchForSale3 = mysql_num_rows($all_RsSearchForSale3);
$totalPages_RsSearchForSale3 = ceil($totalRows_RsSearchForSale3/$maxRows_RsSearchForSale3)-1;
$queryString_RsSearchForSale3 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale3") == false &&
stristr($param, "totalRows_RsSearchForSale3") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale3 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale3 = sprintf("&totalRows_RsSearchForSale3=%d%s", $totalRows_RsSearchForSale3, $queryString_RsSearchForSale3);
} ?>
<?php require_once('Connections/propertypages.php'); ?>
<?php if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
case "text":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "long":
case "int":
$theValue = ($theValue != "") ? intval($theValue) : "NULL";
break;
case "double":
$theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
break;
case "date":
$theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
break;
case "defined":
$theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_RsSearchForSale4 = 10;
$pageNum_RsSearchForSale4 = 0;
if (isset($_GET['pageNum_RsSearchForSale4'])) {
$pageNum_RsSearchForSale4 = $_GET['pageNum_RsSearchForSale4'];
$startRow_RsSearchForSale4 = $pageNum_RsSearchForSale4 * $maxRows_RsSearchForSale4;
$varloc4_RsSearchForSale4 = "mpl";
if (isset($_POST['location'])) {
$varloc4_RsSearchForSale4 = $_POST['location'];
$vartype4_RsSearchForSale4 = "vil";
if (isset($_POST['type'])) {
$vartype4_RsSearchForSale4 = $_POST['type'];
$varprice4_RsSearchForSale4 = "p9";
if (isset($_POST['price'])) {
$varprice4_RsSearchForSale4 = $_POST['price'];
$varbed4_RsSearchForSale4 = "b5";
if (isset($_POST['beds'])) {
$varbed4_RsSearchForSale4 = $_POST['beds'];
switch (true) {
case ($varloc4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varprice4_RsSearchForSale4 =='zzz' && $varbed4_RsSearchForSale4 == 'zzz'):
case ($varloc4_RsSearchForSale4 == 'zzz' && $varbed4_RsSearchForSale4 =='zzz' && $vartype4_RsSearchForSale4 == 'zzz'):
case ($varbed4_RsSearchForSale4 == 'zzz' && $vartype4_RsSearchForSale4 =='zzz' && $varprice4_RsSearchForSale4 == 'zzz'):
mysql_select_db($database_propertypages, $propertypages);
$query_RsSearchForSale4 = sprintf("SELECT DISTINCT trueprice,`desc`, `propid`, `bathrooms`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid WHERE location=%s OR price=%s OR type=%s OR beds=%s ORDER BY detailstable.trueprice ASC", GetSQLValueString($varloc4_RsSearchForSale4, "text"),GetSQLValueString($varprice4_RsSearchForSale4, "text"),GetSQLValueString($vartype4_RsSearchForSale4, "text"),GetSQLValueString($varbed4_RsSearchForSale4, "text"));
$query_limit_RsSearchForSale4 = sprintf("%s LIMIT %d, %d", $query_RsSearchForSale4, $startRow_RsSearchForSale4, $maxRows_RsSearchForSale4);
$RsSearchForSale4 = mysql_query($query_limit_RsSearchForSale4, $propertypages) or die(mysql_error());
$row_RsSearchForSale4 = mysql_fetch_assoc($RsSearchForSale4);
if (isset($_GET['totalRows_RsSearchForSale4'])) {
$totalRows_RsSearchForSale4 = $_GET['totalRows_RsSearchForSale4'];
} else {
$all_RsSearchForSale4 = mysql_query($query_RsSearchForSale4);
$totalRows_RsSearchForSale4 = mysql_num_rows($all_RsSearchForSale4);
$totalPages_RsSearchForSale4 = ceil($totalRows_RsSearchForSale4/$maxRows_RsSearchForSale4)-1;
$queryString_RsSearchForSale4 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
if (stristr($param, "pageNum_RsSearchForSale4") == false &&
stristr($param, "totalRows_RsSearchForSale4") == false) {
array_push($newParams, $param);
if (count($newParams) != 0) {
$queryString_RsSearchForSale4 = "&" . htmlentities(implode("&", $newParams));
$queryString_RsSearchForSale4 = sprintf("&totalRows_RsSearchForSale4=%d%s", $totalRows_RsSearchForSale4, $queryString_RsSearchForSale4);
}?>Hi David,
Thank you for your reply and patience, we are getting closer in spite of me!
Of course i needed to change the name of the recordset, i did that the first time i did it (when i got the error), the when i re did it i forgot, in my defense i was also trying to get a full understanding of the code using the W3Schools php reference and writing by the side of the code on a piece of paper what it meant in English.
Anyway after re doing the code correctly it still displayed all the records of my database but i realised that was because i was POSTING from the search form and when i changed it to the GET method I now get results when all 4 list menus are selected from and the paging works. After reading about the POST / GET method i chose the POST option, is the GET method a better option in my circumstance?
On my site now if the user selects from 1,2 or 3 of the menus rather than selecting the relevant records it displays the NO RESULT page, I would like my users to be able to select from all of the menus or ANY combination of the menus and find exact results for their search, for example if they only select a location and a price i want it display all records that match that location and price with any number of bedrooms and any Type of property: Perhaps this is due to how my list menus are set up, for each menu the first Item label is Location (or Beds or Type or Price) and the value i have left blank which i believe means that it will use the item label as the value, the second Item label for all menus is Any and again the value has been left blank. All other item labels have values relevant to database records.
I do look forward to your reply and cannot thank you enough for following this through with me, please continue to bare with me just a little more,
best regards
Tessimon
Date: Wed, 11 Nov 2009 06:56:24 -0700
From: [email protected]
To: [email protected]
Subject: Help with message please: Warning: mysql_free_result() expects parameter 1 to be resource, null given in...... line
You're not adding the WHERE clause to the SQL query. My example code uses $query_search. You need to change that variable to match the name of your recordset, i.e. $query_RSsearchforsale.
Moreover, the WHERE clause needs to go before ORDER BY.
$query_RSsearchforsale = "SELECT trueprice,`desc`, `propid`, `bathrooms`, `location`, `type`, `price`, `beds`, `photo1`, locationtable.loc, typetable.style, bedtable.`number` FROM detailstable JOIN locationtable ON detailstable.location=locationtable.locid JOIN typetable ON detailstable.type=typetable.typeid JOIN pricetable ON detailstable.price=pricetable.priceid JOIN bedtable ON detailstable.beds=bedtable.bedid ";
// Set a flag to indicate whether the query has a WHERE clause
$where = false;
// Loop through the associatiave array of expected search values
foreach ($expected as $var => $type) {
if (isset($_GET[$var])) {
$value = trim(urldecode($_GET[$var]));
if (!empty($value)) {
// Check if the value begins with > or <
// If so, use it as the operator, and extract the value
if ($value[0] == '>' || $value[0] == '<') {
$operator = $value[0];
$value = ltrim(substr($value, 1));
} elseif (strtolower($type) != 'like') {
$operator = '=';
// Check if the WHERE clause has been added yet
if ($where) {
$query_RSsearchforsale .= ' AND ';
} else {
$query_RSsearchforsale .= ' WHERE ';
$where = true;
// Build the SQL query using the right operator and data type
$type = strtolower($type);
switch($type) {
case 'like':
$query_RSsearchforsale .= "`$var` LIKE " . GetSQLValueString('%' .
$value . '%', "text");
break;
case 'int':
case 'double':
case 'date':
$query_RSsearchforsale .= "`$var` $operator " .
GetSQLValueString($value, "$type");
break;
default:
$query_RSsearchforsale .= "`$var` = " . GetSQLValueString($value,
"$type");
$query_RSsearchforsale .= ' ORDER BY detailstable.trueprice ASC';
> -
Need a little Help with my new xfi titanium
+Need a little Help with my new xfi titanium< A few questions here.
st question? Im using opt out port on the xfi ti. card and using digital li've on a windows 7 64 bit system,? I would like to know why when i use 5. or 7. and i check to make sure each speakear is working the rear speakers wont sound off but the sr and sl will in replace of the rear speakers. I did a test tone on my sony amp and the speaker are wired correctly becasue the rear speakers and the surrond? left and right sound off when they suppose too. Also when i try to click on? the sl and sr in the sound blaster control panel they dont work but if i click on the rear speakers in the control panel the sl and sr sound off. Do anyone know how i can fix this? So i would like to know why my sl and sr act like rears when they are not?
2nd question? How do i control the volume from my keyboard or from windows period when using opt out i was able to do so with my on board? sound max audio using spidf? Now i can only control the audio using the sony receiver.
Thank you for any help../Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard. -
Need a little help with syncing my iPod.
I got a new macbook pro for cristmas and a few cds. After i tried to sync my ipod to itunes i put a symbol next to each song that i got from other cds saying that they were downloading but they werent. Also the cds i downloaded to my ipod for the first time didnt appear at all. Need help.
/Re: Need a little Help with my new xfi titanium? ?
ZDragon wrote:
I'm unsure about the first question. Do you even have a 7. system and receiver? If you just have 5., you should be able to remap the audio in the THX console.
I do have a sony 7. reciever str de-995 its an older one but its only for my cpu. At first i didnt even have THX installed because it didnt come with the driver package for some reason until i downloaded the daniel_k support drivers and installed it. But it doesnt help in anyway.
I have checked every where regarding the first question and alot of people are having problems getting sound out of there rear channels and the sound being re-mapped to the surround right and the surround left as if there rear left and rear right.
I read somewhere that the daniel_k support drivers would fix this but it didnt for me and many others.
For the second question i assumed it would be becasue of the spidf pass through and that my onboard sound card was inferior to the xfi titaniums. But i wasnt sure and i was hopeing that someone would have a solution for that problem because i miss controlling the volume with my keyboard. -
Combo box and Check box..help with code please?
Here is my problem...i have a list of check boxes and according to which one is checked, i need combo boxes to populate different choices.
as an easy example im only using 2 check boxes and two combo boxes.
the check boxes are named Choice 1or2 with export values of 1 and 2
the Combo Boxes are named List A and List B..
both containing options that say you checked box 1 and you checked box 2
any help would be greatly appreciatedImplode wrote:
"Help with code please."
In the future, please use a meaningful subject. Given that you're posting here, it's kind of a given that you're looking for help with the code. The whole point of the subject is to give people a high level idea of what KIND of help with what KIND of code you need, so they can decide if they're interested and qualified to help.
Exception in thread "main" java.lang.NumberFormatException: For input string: "fgg"
at java.lang.NumberFormatException.forInputString(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at java.lang.Integer.parseInt(Unknown Source)
at assignment1.Game.Start(Game.java:120)
at assignment1.RunGame.main(RunGame.java:18)This error message is telling you exactly what's wrong. At line 120 of Game.java, in the Start method (which should start with lowercase "s" to follow conventions, by the way), you're calling Integer.parseInt, but "fgg" is not a valid int. -
I have need help with something Please respond Quickly :)
I have need help with something Please respond Quickly ok so i have the linksys wrt54g Version 2.2 and i upgraded the firmware to V4.21.4 from this site http://homesupport.cisco.com/en-us/wireless/lbc/WRT54G and i clicked V2.2 for the router. So after i upgraded i lost internet ability i can't use the internet so i had to downgrade back to V4.21.1 but i want the things that newer update sloves. Please Help. Everything thing says DNS error? aka Modem.
$$Cgibbons$$Ya i tried that i tried restoring and redoing everything when i downgrade back to .1 it works fine though?
$$Cgibbons$$ -
Hi I got an email from itunes saying that my pre order was ready and when I click on the link from my ipad it takes me to the itunes store app and then it doesn't do anything help with this please .
<Link Edited By Host>Thanks for your advice, I went to the apple shop today for a face to face meeting with a tech and he checked everything and could not figure out why I was having this problem so we decided to give up on that account and create a whole new one for me using a different email address.
Now I can download apps on both my iPhone and ipad2.
If anyone is reading this in Brisbane Australia go to the Chermside apple shop and ask for Wade. He was fantastic!
Jan -
Itunes istallation freezes at 'Publishing Product Information'. Can anyone help with this please?
Itunes istallation freezes at 'Publishing Product Information'. Can anyone help with this please?
You need more memory. 4 GB is not enough:
1.12 GB Page-outs
[killed] com.apple.CallHistoryPluginHelper.plist
[killed] com.apple.CallHistorySyncHelper.plist
[killed] com.apple.cmfsyncagent.plist
[killed] com.apple.coreservices.appleid.authentication.plist
[killed] com.apple.sbd.plist
[killed] com.apple.security.cloudkeychainproxy.plist
[killed] com.apple.telephonyutilities.callservicesd.plist
7 processes killed due to memory pressure
Problem System Launch Daemons: ℹ️
[killed] com.apple.ctkd.plist
[killed] com.apple.icloud.findmydeviced.plist
[killed] com.apple.softwareupdate_download_service.plist
[killed] com.apple.wdhelper.plist
4 processes killed due to memory pressure -
Help with ram slots on MSI P7N SLI PLATINUM
rig config:
MSI P7N SLI PLATINUM (MS-7380)
bios version: 1.3v
Q6600 quard core 2.66GHz
Zotac modded 9800GTX+ amped version
2x2 Gb DDR2 800MHz Kingston
500 watt (absolute) power supply (taken form an old HP workstation)
windows 7 X64
Everything's on stock setting
Its been almost 1 & 1/2 years since i bought this rig, and from first month itself i have been having problem with the ram. The problem is not with the sticks, its with the ram slots. There are different things that happen. Sometimes when i boot my system:
1) either, it wont start, i.e. no boot screen.
2) It will load upto windows startup screen, crash and restart in an infinite loop.
3) It will load windows, then crash after sometime.
4) If i run any memory diagnostic, it will give errors.
At these times, i take out my 2 ram sticks, tinker with them, place them in different combination of ram slots, try push them in, in a certain way, keep trying until it yields and it boots up again ( generally a process of 1/2 an hr to an hr). After this my system will work fine ( no errors on any memory diagnostic) and boot properly for a week or 2, maybe even a month, but then again the same problem happens. I know for sure that there is no problem with my dimms (have checked them in other system and they work fine), its something to do with ram slots, or memory bus-controller structure.
Recently the problem happened again, though my tinkering didn't help. My system only boots up if i place any of the ram sticks in the 3rd slot (the 1st orange one). It wont work for any other slot and neither will it work if i place both of the sticks together. I have tried resetting my bios as well cmos settings, but it has not helped. My mb is still in warranty, but if i give it for repair, it will be gone for a good month or so, which doesn't go well with me. If someone has any suggestions, or a way out, it will be highly appreciated. Please help!Quote from: nellinil on 10-July-10, 10:27:51
yes the psu has a single +12v rail with 21A rating, but somehow i don't feel the problem is because of it. When my system successfully boots, it works properly. I can play or work on high performance softwares for any number of hours without fail, which ought not to happen if the psu is bad.
Hmm, you are ignoring the possibility that your PSU is "flaky" (that's a technical term)!!!! You've never had any gizmo where "sometimes it works and sometimes it doesn't work"?
If you don't want to buy a new PSU then at least beg-borrow-steal another one and see if your symptoms change. -
Need a little help with dial setup on CME
I've got a CME I'm using for testing and I think I need a little help figuring out the proper config to get the system to accept numbers I dial and have those numbers be passed on to an Avaya system (including the leading 9 for ARS in Avaya) via H.323 IP trunks. I have it working well for internal 5 digit extension calls across the H.323 trunks and I also have it working well for some types of outside calls that gets passed on to the Avaya and then the Avaya dials the call out to the PSTN. My only real problem is, I can't figure out how to correctly configure CME to examine the digits I'm dialing and only send the digits once I'm finished dialing....not as soon as it sees an initial match.
What's happening is this. I can dial local numbers in my area as 7 digits or 10 digits. The phone company doesn't yet force us to dial area code and number for local calls (10 digits). I can still dial 7 digits. But...if I put an entry in CME that looks like this....
(by the way, the 192.168.1.1 IP is not the real IP address, that's just an example, but the rest of this entry is what I really have entered in CME)
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...Then it will always try to dial out immediately after seeing the first 8 digits I dial (9 plus the 7 digit number I called)...even though I have a speicifc entry in the system that accounts for calls to 9 plus area code 513. I would have assumed that if I put the specific entry in for 9513....... it would see that and wait to see if I was actually dialing something to match 9513....... instead of 9....... Understand what I mean? Because 9513....... is more specific than 9....... but it still tries to send the call out immediately after seeing the first 8 digits I dialed.
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
...BUT...here's the interesting thing. If I trace the 10 digit call in Avaya, I see that the number being presented to the Avaya PBX is only the first 7 digits of the number....not the full 10 digits...BUT I see a few more of the digits I dialed (like the 8th and 9th digits) after the call is already setup and sent to the PSTN. It's like the CME is trying to send the rest of the 10 digits I dialed, but at that point it's already too late. It setup the call as a 7 digit call (9 plus 7 digits), not 10 digit like I wanted.
I'm more familiar with how to setup dialing in the Avaya via ARS. My background is Avaya, not Cisco, so this dial-peer config is a little difficult for me until I understand the reasoning of how it examines the numbers and what I should do to make it wait for me to finish dialing....or to tell the system that what I'm dialing will be a minimum or a certain amount of digits and maximum of a certain amount of digits, like the Avaya does. I just need some pointers and examples to look at :-) I think I've almost got it....but I'm just missing something at the moment.
Just so you understand, the call flow should be like this: Cisco phone registered to CME > CME to Avaya via H.323 trunks > Avaya to PSTN via ISDN PRI trunks connected to Avaya. I have to be sure I send the 9 to the Avaya also, because 9 triggers ARS in the Avaya.
Thanks for your helpHere is a good document that explains how dial-peers are matched in the Cisco world:
http://www.cisco.com/en/US/tech/tk652/tk90/technologies_tech_note09186a008010fed1.shtml#topic7
In your case, it is variable length dial plan you are trying to implenent. To fix it, you need to add a T to force the system to wait for more digits to be entered if there is any.
dial-peer voice 9 voip
description Outside 7 Dig Local Calls Via Avaya
destination-pattern 9.......T
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 9513 voip
description Outside 10 Dig Local Calls Via Avaya
destination-pattern 9513.......
session target ipv4:192.168.1.1
dtmf-relay h245-alphanumeric
no vad
You can also configure the inter-digits timeout using the command timeouts interdigit under telephony-service.
Please rate helpful answers! -
Little help with complex XML data as data provider for chart and adg
Hi all,
I've been trying to think through a problem and Im hoping for
a little help. Here's the scenario:
I have complex nested XML data that is wrapped by subsequent
groupings for efficiency, but I need to determine if each inner
item belongs in the data collection for view in a data grid and
charts.
I've posted an example at the bottom.
So the goal here is to first be able to select a single
inspector and then chart out their reports. I can get the data to
filter from the XMLListCollection using a filter on the first layer
(ie the name of the inspector) but then can't get a filter to go
deeper into the structure in order to determine if the individual
item should be contained inside the collection. In other words, I
want to filter by inspector, then time and then tag name in order
to be able to use this data as the basis for individual series
inside my advanced data grid and column chart.
I've made it work with creating a new collection and then
looping through each time there is a change to the original
collection and updating the new collection, but that just feels so
bloated and inefficient. The user is going to have some buttons to
allow them to change their view. I'm wondering if there is a
cleaner way to approach this? I even tried chaining filter
functions together, but that didn't work cause the collection is
reset whenever the .refresh() is called.
If anyone has experience in efficiently dealing with complex
XML for charting purposes and tabular display purposes, I would
greatly appreciate your assistance. I know I can get this to work
with a bunch of overhead, but I'm seeking something elegant.
Thank you.Hi,
Please use the code similar to below:
SELECT * FROM DO_NOT_LOAD INTO TABLE IT_DO_NOT_LOAD.
SORT IT_DO_NOT_LOAD by WBS_Key.
IF SOURCE_PACKAGE IS NOT INITIAL.
IT_SOURCE_PACKAGE[] = SOURCE_PACKAGE[].
LOOP AT IT_SOURCE_PACKAGE INTO WA_SOURCE_PACKAGE.
V_SYTABIX = SY-TABIX.
READ TABLE IT_DO_NOT_LOAD into WA_DO_NOT_LOAD
WITH KEY WBS_Key = WA_SOURCE_PACKAGE-WBS_Key
BINARY SEARCH.
IF SY-SUBRC = 0.
IF ( WA_DO_NOT_LOAD-WBS_EXT = 'A' or WA_DO_NOT_LOAD-WBS_EXT = 'B' )
DELETE IT_SOURCE_PACKAGE INDEX V_SYTABIX.
ENDIF.
ENDIF.
ENDLOOP.
SOURCE_PACKAGE[] = IT_SOURCE_PACKAGE[].
ENDIF.
-Vikram -
Need help with ram on bootcamp
hey guys i need help with getting more ram on the pc side of bootcamp.
it says i have 1.99 of ram on the pc side
then on the mac i got this
Model Name: Mac Pro
Model Identifier: MacPro1,1
Processor Name: Dual-Core Intel Xeon
Processor Speed: 2 GHz
Number Of Processors: 2
Total Number Of Cores: 4
L2 Cache (per processor): 4 MB
Memory: 4 GB
wanting to know how to get more ram over to boot campRodney:
You cannot physically or via software add/move RAM from OSx side to Windows side. This is because you run Leopard and Windows separately and therefore when one is running the other is not active. The only thing that controls how much RAM Windows sees/uses is determined by the type of Windows you have installed (32BIT or 64BIT). Please do not confuse that with Gigabytes of RAM or disk space.
32BIT Windows has a maximum limit of 3GB of RAM (it often uses only around 2GB of RAM when it is sharing the system RAM with your video card. I believe this is the case with you.
64BIT Windows will be able to sees/use all of your 4GB of RAM.
Leopard sees/uses all of your 4GB of RAM.
If you have installed Windows XPSP2 and it is working properly on your boot camp partition then I can assure you that it is the 32BIT version.
FYI - The only time that one can select/decide how much RAM Leopard uses and how much RAM Windows uses is when one is running Windows as a Virtual Machine under software such as Fusion or Parallels. I have assumed that you are running windows on a boot camp partition (from your posts) and therefore this does not apply to you.
Axel F.
Maybe you are looking for
-
How to populate drop down list in infopath 2010 with form library column
I created one column of choice type and have put 3 values on this column in form library in site. and one drop down list in form library at infopath 2010 but how to populate the dropdown in infopath populate with this column.
-
First DTP in Process chain giving Error "CX_RSB_WRITE_ERROR"
Hi All, I am facing a problem when I execute a process chain. I have a master process chain and 3 sub process chains. Each of these sub process chains are having some DTP in it in a sequential order. These DTP's are Independent of each other, so even
-
Hi. Can anyone help me? I am trying to delete a phone number which appears in my Messages list even though i have deleted the text message content it came from.
-
Javascript error in event handler! Event Type = element [edge.2.0.0.min.js:162]
I'm doing a little edge project (now in beta version) for my girlfriend (she hates the code), with examples of the animate() method and other functions like setInteval(), but when I run I get the following error in Chrome console: Javascript error in
-
CS3 / Javascript - Script Error 27: Stack overrun
Hi I have a script who is running all the time (like an Idle). This script calls a method in my own plugin, this method execute an action in my plugin. During this action, I call another Javascript to checkout a document from a content management sys