A little question about graphs

Hello,
I took an example which already exists in the Ni repertoire, and I modify it according to what I have need.
My question is Dynamic Induction.vi excecute and stops after 3000seconds, I will want that if I click on the button "Stop", the tracing of the curves stops immediately. How do I have to make in this case? I thank you in advance.
I send you the differents files.
Attachments:
Dynamic Induction Motor.zip ‏444 KB

Hello,
I thank you much for your assistance. I thus modified Dynamic InductionMOD.vi consequently.
I have another question, how do I have to make to safeguard the curves posted in a file so that I can use them at the time of the next excécution of the VI?
Another question, how do I have to make to just be able to copy some curves posted to put them for example in a written report of Word file?
Is it possible to be able to print using a printer right a graph, for example a "Torque vs time" contained in the graphe1? How do I have to proceed?
I send the new modified files to you
I thank you in advance for your assistance.
With soon!!
Nadine
Attachments:
Dynamic Induction Motor.llb ‏896 KB

Similar Messages

Two little questions about ROWID

Hello friends at www.oracle.com ,
as we know, each time we insert a new line, Oracle creates an unique ROWID for that line. I have 2 questions about ROWID:
1. Is there a way for me to obtain ROWID value at the moment of insertion, other than doing a SELECT rowid FROM (table) WHERE (primary key inserted values) to obtain the ROWID that was generated for that line?
2. If, for any reason, we have a so big database that all ROWID possible combinations are over, how would Oracle handle such situation? I believe it's something quite rare to happen but, anyway, there's the possibility as Murphy Laws have taught us :)
Thanks for all answers, and best regards,
Franklin Gongalves Jr.

1. The (quite new) DML RETURNING clause allwos this:
Eg. insert into bonus values ('Bill', 'work',100, 4) returning rowid into :x
This works in 8.1.7 and 9.0.1 I don't know about earlier.
2. A rowid includes the physical address of the data. Before you used all the rowid's, the database wouldn't be able to hold any more data. The limit is big, but not infinite. If you hit it, try going to distributed databases using database links.

A little question about the WWDC 2006 and Macbook

I was considering to buy my first Macbook, no, my first mac EVER these days, but after i heard of the WWDC 2006 i'm afraid to miss some new upgrades made on the Macbook when i buy it next week.
But someone told me too, that even if there are Upgrades, i probably have to wait them to come to Europe for about 2 month - and thats much to long to wait for me cause i need it for work in the next four weeks !
Hope you can say me whats to do
Greetings
Agent Darkbooty

Thank you very much for your help
But i've got still a question ..
..would you buy the macbook next week or would you wait untill the end of the conference ?
Seems like there will only be software updates for the macbook

A Little question about Pixel Aspect Ratio

This doubt has been bugging me since I started edit HD formats.It's about pixel aspect ratio.
Let's supose I have received some material in HD format,for instance.But I will deliver this material in another format, DV NTSC,for instance.
The Pixel aspect ratio format of the material what I received and the way how I will deliver are different.What can I do to avoid this problem? Do I need to apply some plugin to solve this problem or when I export the final sequence Final Cut does this automatically?
thank you

The software takes care of it for you.
As long as your conversion maintains the overall aspect ratio (ie 16:9), it is irrelevant what the individual pixels are doing.
For example, if I convert DVCProHD 720p to ProRes 720p, it will look fine even though the DVCProHD started out with 960 pixels in the x dimension and the ProRes will have 1280.
x

A little question about inheritance

Can someone explain this to me?
I have been reading about inheritance in Java. As I understand it when you extend a class, every method gets "copied" to the subclass. If this is so, how come this doesn't work?
class inherit {
    int number;
    public inherit(){
        number = 0;
    public inherit(int n){
        number = n;
class inherit2 extends inherit{
    public inherit2(int n, int p){
        number = n*p;
class example{
    public static void main(String args[]){
        inherit2 obj = new inherit2();
}What I try to do here is to extend the class inherit with inherit2. Now the obj Object is of inherit2 class and as such, it should inherit the constructor without parameters in the inherit class or shouldn't it ??? If not, then should I rewrite all the constructors which are the same and then add the new ones??

I believe you were asking why SubClass doesn't have the "default" constructor... after all, shouldn't SubClass just have all the contents of SuperClass copy-pasted into it? Not exacly. ;)
(code below... if you'd like, you can skip the first bit, start at the code, and work your way down... depending on if you just started, the next bit may confuse rather than help)
Constructors are special... interfaces don't specify them, and subclasses don't inherit them. There are many cases where you may not want your subclass to display a constructor from it's superclass. I know this sounds like I'm saying "there are many cases where you won't want a subclass to act exactly like a superclass, and then some (extend their functionality)", but its not, because constructors aren't how an object acts, they're how an object gets created.
As mlk said, the compiler will automatically create a default constructor, but not if there is already a constructor defined. So, unfortunatley for you, there wont be a default constructor made for SubClass that you could use to create it.
class SuperClass { //formerly inherit
int number;
public SuperClass () { //default constructor
number = 0;
public SuperClass (int n) {
number = n;
class SubClass extends SuperClass { //formerly inherit2
//DEFAULT CONSTRUCTOR, public SubClass() WILL NOT BE ADDED BY COMPILER
public SubClass (int n, int p) {
number = n*p;
class Example {
public static void main(String [] args) {
//attempted use of default constructor
//on a default constructorless subclass!
SubClass testSubClass = new SubClass();
If you're still at a loss, just remember: "Constructors aren't copy-pasted down from the superclass into the subclass!" and "Default constructors aren't added in if you add your own constructor in" :)
To get it to work, you'd have to add the constructor you used in main to SubClass (like doopsterus did with inheritedClass), or use the constructor you defined in SubClass for when you make a new one in main:
inherit2 obj = new inherit2(3,4);
Hope that cleared things up further, if needed. By the way, you should consider naming your classes as a NounStartingWithACapital, and only methods as a verbStartingWithALowercase

One little question about searching partial text in object name

Hello Everyone,
I have searched a bit but couldn't find an answer about this.
I am a Freehand user and i am currently using navigation names for differents items. Works perfectly good.
But now i need to search part of the items name.
For example i have the objects named in the nabigation panel as:
- "ItemA-rotation" for the first group of items
- "ItemB-static" for the second group of items
as for now i can search for all the items A by typing in the search graphic panel "ItemA-rotation" but i would like to find both item A and B by typing a unique search request.
Is it possible to write something like: "*Item*" to search every items that contains the part "Item" in the full name ?
Thank you for your future answers.
Cheers.
PS: i am using Mac os X with Freehand MX.

It appears it isn't possible. I set up a similar document with spaces added between the word "index" and the letters "A" or "B". My thinking was that the connected wording of your phrase "ItemA-rotation" was limiting the search. But searching for the word "index" didn't reveal all the items; it had to be typed exactly as the name was set up in the Navigation Panel. Perhaps I'm missing some unknown control characters but I have never seen what those could be.

Little question about Newsstand.

Just wondering why nothing in the free section of Newsstand is free? I'd like to at least get one or two magazines or articles about things I enjoy for free. Maybe something to think about, Apple.

So you can use xml to create and load items into dynamic
movieclips so you can see this one to itroduct yourself to xml
http://www.kirupa.com/web/xml/XMLwithFlash3.htm
or the other and easy way is to use Treww component and see how it
works in Flash samples in your computer \Program
Files\Macromedia\Flash 8\Samples and
Tutorials\Samples\ActionScript\Galleries\ and see the Gallery_Tree
if you want you can see the Gallery_Tween this files is for gallery
but u can transofrm easy to use for your project cheers :))

A little question about the pencil tool

I have just a tiny guestion about the pencil tool in illustrator.
When i want to draw like it is a real pencil and make a lot of lines with it, then everytime when i'm drawing lines are disappearing because i'm drawing it again.
Maybe thats because i'm drawing over the other lines...but is there a simple way to make new lines all the time, so i can draw a bunch of lines over each other and agross etc.
hope you understand my crappy english.
with love,
Linda

Double click the pencil tool icon and check the options. You won't want to "edit selected paths"

Little question about a Claws-Mail tray icon theme, and how to use it.

There is a Claws Mail tray icon theme available on gnome-look.org:
http://gnome-look.org/content/show.php/ … tent=71540
These are the instructions the author gives to install the theme:
Claws Mail Tango trayicon theme
Claws-Mail version = 3.3.0
copy icons claws-mail-3.3-0/src/pixmaps, recompile and install.
So what am I supposed to do (especially since the newest Claws Mail version is 3.4.0...)?

Stalafin wrote:
There is a Claws Mail tray icon theme available on gnome-look.org:
http://gnome-look.org/content/show.php/ … tent=71540
These are the instructions the author gives to install the theme:
Claws Mail Tango trayicon theme
Claws-Mail version = 3.3.0
copy icons claws-mail-3.3-0/src/pixmaps, recompile and install.
So what am I supposed to do (especially since the newest Claws Mail version is 3.4.0...)?
I would recommend using ABS. just makepkg -o first so the sources get DL'd and unpacked. copy your icons and makepkg -e so the sources are not extracted again and therefore your new icons overwitten.
finally, enjoy some awesomeness:

A little question about compiling my own kernel

Hii, How can I know please, wich moudle is loaded in my current kernel and being used?
for example, if I have now the RAID xxxx , and I don't use it, so when compiling my own Kernel, I don't need it.
How can I know wich ones arn't needed?

Ok Lsmod I know, is there any thing else?

Little question about Creative Labs Zen Nano P

I have a Zen Nano Plus but I have trouble with it
My computer doesn't find him
What can I do?
I'm running Windows 98

Hi Sara,
The minimum system requirements for that player are:
Microsoft? Windows? 98SE/Me/2000/XP
If you have Windows98 (not SE), then that won't work correctly, it does not have proper USB support.
Cat

Hi! I bought sony xperia z1 Phone. Little question about camera.

Basically when i try to take a picture. I see how the picture should come out etc. And then after i take picture , it is from Another angle. Its so annoying! My friend has exactly the same phone ( i bought because he told me to buy it ) and i love the phone obviously. But he doesnt have that issue. And theres like no settings to change it to normal , atleast i cant find it. What can i do to fix it?

I know what you mean and that's the way it's supposed to be - the image you see before taking the photo is a reversed or mirror of what you are - A simple test would be to close one eye for example, lets say left but on the phone's screen it would look like your right eye so once the photo is taken and you viewit, it is your left eye that's closed

Question about sony NFC tags

Hi every body,
I have a little question about the NT1 smart tags of sony.
I installed other app from google play to NFC tags in my phone.
I installed it, because the smart tag app of sony, don't have the action to turn on or turn off the GPS by NFC tag.
When I used with other app, and I written on the blue smart tag, I mark to became the blue smart tag to read only.
So, now I can't to write on him, and the phone is not recognazied the blue smart tag ( all other smarts tags is OK, because I didn't used them ).
When I scan the blue smart tag, the phone show a message: "unknown type tag".
Am I can cancelled it and became it back? that's mean that the phone is recognaized it and I can to write on it?
Or, is it one way, and I can't used with the blue smart tag again?
Thank you.

you can do a factory reset or repair your phone with SUS
Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe
Alternatives on How to backup Xperias
http://talk.sonymobile.com/thread/36355
Don't forget to mark the Correct Answers & Helpful Answers
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Question about the programming of a legend

Hello everybody,
I have a question about the programming of a waveform's legend. I
already asked here in this forum about the legend programming (03)
months ago.
I went satisfied but I ve just noticed that this code
(See Code old_legend_test.llb with main.vi as main function) operates a
little different from my expectances.
Therefore I have a new question and I want to know if it
is possible by labview programming to plot and show, on a waveform
chart, a signal with activ plot superior to zero (0) without to be
obliged to plot and show a signal with activ plot equal to zero (0) or
inferior to the desired activ plot.
I give you an example
of what I m meaning. I have by example 4 signals (Signal 0, 1, 2 and 3)
and each signal corresponds respectively to a channel (Chan1, Chan2,
Chan3, Chan4). I want to control the legend (activ plot, plot name and
plot color) programmatically. Is it possible with labview to plot signal
1 or 2 or 3 or (1, 3) or (2,3) or (1,2,3) or other possible combination
without to active the signal with the corresponding activ plot zero
(0)?
Let see the labview attached data
(new_legend_test.llb with main.vi as main function). When I try to
control the input selected values again I get them back but I don't
understand why they have no effect on the legend of my waveform chart.
Could somebody explain me what I m doing wrong or show me how to get a
correct legend with desired plots? Thank by advance for your assistance.
N.B.
The
both attached data are saved with labview 2009.
Sincerly,PrinceJack
Attachments:
old_legend_test.llb ‏65 KB
new_legend_test.llb ‏65 KB

Hi
princejack,
Thanks for
posting on National Instruments forum.
The behavior
you have is completely normal. You can control the number of row displayed in
the legend and this rows are linked to the data you send to your graph. Thus,
if you have 3 arrays of data, let say chan1, chan2 and chan3, you can choose
which data you want to display in your graph using the property node (Active
plot and visible). But for the legend as you send 3 plots there is an array of
the plot name [chan1, chan2, chan3] and you can display 0, 1, 2 or 3 rows of
this array but you cannot control the order in this array! So, to be able to
change this array you have to only send data you need to you graph. I'm not
sure my explanations are clear so I have implemented a simple example doing
that.
Benjamin R.
R&D Software Development Manager
http://www.fluigent.com/
Attachments:
GraphLegend.vi ‏85 KB

Just installed iOS6, questions about "iMessage" and other things...

I've been a satisfied iOS4 user since I bought my iPhone4, but I was forced to install iOS6 tonight in order to download a "free" app. I found a few new icons on the screen along with about 200 percent more "Settings" I'd like to ask some questions about. I'm sure a few of these could be answered by doing a frantic and thorough search through weeks of posts but I'm a little short on time right now.
First, what exactly is iMessage? Looking at the page for it, I can't see any difference between it and regular text messages. The info page says its to avoid charges, but between my data plan and not being charged for text I don't see where theres any other benefit. The one person I text with the most recently asked me why I had not installed iMessage yet, and didn't have an answer when I asked him why I should. I guess he just wanted to see text replies in blue instead of green.
In a related bit, flipping through Settings>Messages>Send & Receive I find a "2 addresses" section, with my phone number in there as well as my email under "You can be reached by iMessage at:" and "Start new conversations from:". What good does it do iMessages to have my email address? Does the Mail app handle text as well as email addresses? That seems to be the only explanation, and also very odd to think I'd be trying to text through my Mail app.
Second, looking through the Settings>Mail I see now that I have an icloud email address as well as the mac.com address I've been desperately hanging on to for the past 10 years, and the me.com address they've been trying to force me into since those came out. (I was happy to see I could delete the me.com address from the phone. I wish I could delete it from the universe.)
I wasn't even aware there was a such thing as icloud.com addresses. When did this happen? What is it used for?
Third, under that icloud Setting I see a long list of apps with buttons labeled "Off" under it. What are those for? Under the Mac.com settings I see switches for "Mail" and "Notes", with Mail on and Notes off. The Notes app (which I haven't used since my old iPhone 3) still opens, regardless of this setting.
Fourth, I now have an item called "Facetime" under my Settings. It is off, but underneath it says "Your phone number and/or email address will be shared with people you call". I understand caller ID normally sends caller number info to the receiver, but why would someone need my email address if I call them?
Fifth, I now have a "Music" setting, at the bottom of which I see a "Home Sharing" item, which when clicked brings up my AppleID and asks me if I want to Sign Out or Cancel. What is Home Sharing? Its also at the bottom of the "Video" settings.
Sixth, now I have Twitter and Facebook settings? For what? I don't have accounts with either of those companies. So why have settings, especially since it asks me to create accounts and download apps for those companies right in the Settings?
Seventh, there is a camera icon on the unlock screen. Touching it causes the screen to bounce up about a quarter inch, almost but not quite revealing something behind it. I should probably just quit asking about this stuff already, but I'll take the bait - what is this now?
Finally, what is the Notification Center used for?
If I got a text under iOS4, it would put an alert on the Unlock screen. Scrolling through this huge list of things under the Notification settings I'm really blown away by all the apps set up to yell at me. I can see having an alert for a text message but Game Center? What the heck is that, and why is it set up to hit me with a "Badge App Icon" (whatever that is) when I get alerts from "Everyone". Similarly, the phone is set to alert me to something called a "Photostream Alert"? What is this? Why is there a Phone section for the Notification Center? So they can put a Notice on my screen to tell me the phone is ringing? Holy cow! The phone is set to send me alerts from the "Weather Widget". So if I miss the fact its raining there will be a message on my screen to let me know? Whats next - a buzzer to tell me I'm listening to music?
There's a lot more, like what would I need Passbook for when I have the actual movie tickets, gate boarding passes, coupons, etc in my hands, but we'll leave that for another time. Many thanks to all who can offer some answers to my questions above.

Hey Taantumus!
Here is an article that will provide some guidance on this question:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
The next time you use an Apple feature or service that uses Apple ID, you'll be asked to sign in with your new Apple ID password.
Thanks for coming to the Apple Support Communities!
Regards,
Braden

A little question about graphs

Similar Messages

Maybe you are looking for