A Little Secret Hardly anyone knows (I think)

A few weeks ago I was at the Apple Store at the Grove in Los Angeles. I was wearing my cap that says "Navy Seabee". The wife and I were looking for software. I got the software and as I was walking to the checkout one of the salesperson stopped me and said if I knew they gave a Military discount. I told him no I didn't. He asked if I had any id on me to show I was a Veteran. I had my VA Hospital card. I showed it and got a 4% discount. I then went to the Apple Store in Manhattan Beach where I purchased my iMac. I told them what happened and they then refunded about 8% on the iMac I bought before I knew about this discount. So if you are active military or a veteran check this out.

HI,
You are a ray of sunshine! Thank you so much for sharing that information. I wasn't aware of this but I will surely remember. You should wear your seabee more often.
More importantly, thank you for serving.
Carolyn

Similar Messages

I think my iMac got virus on my iMac through opening an email from Facebook on Safari, anyone knows how to do a complete erase and clean up of the iMac?

I think my iMac got virus on my iMac through opening an email from Facebook on Safari, anyone knows how to do a completely erase and clean up of the iMac?

Things You Can Do To Resolve Slow Downs
If your computer seems to be running slower here are some things you can do:
Start with a visit to: OS X Maintenance - MacAttorney.
Boot into Safe Mode then repair your hard drive and permissions:
Repair the Hard Drive and Permissions Pre-Lion
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Repair the Hard Drive - Lion
Boot from your Lion Recovery HD. When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Restart your computer normally and see if this has helped any. Next do some maintenance:
Suggestions for OS X Maintenance
For situations Disk Utility cannot handle the best third-party utility is Disk Warrior; DW only fixes problems with the disk directory, but most disk problems are caused by directory corruption; Disk Warrior 4.x is now Intel Mac compatible.
OS X performs certain maintenance functions that are scheduled to occur on a daily, weekly, or monthly period. The maintenance scripts run in the early AM only if the computer is turned on 24/7 (no sleep.) If this isn't the case, then an excellent solution is to download and install a shareware utility such as Macaroni, JAW PseudoAnacron, or Anacron that will automate the maintenance activity regardless of whether the computer is turned off or asleep. Dependence upon third-party utilities to run the periodic maintenance scripts was significantly reduced since Tiger. These utilities have limited or no functionality with Snow Leopard or Lion and should not be installed.
OS X automatically defragments files less than 20 MBs in size, so unless you have a disk full of very large files there's little need for defragmenting the hard drive. As for virus protection there are few if any such animals affecting OS X. You can protect the computer easily using the freeware Open Source virus protection software ClamXAV. Personally I would avoid most commercial anti-virus software because of their potential for causing problems. For more about malware see Macintosh Virus Guide.
I would also recommend downloading a utility such as TinkerTool System, OnyX 2.4.3, or Cocktail 5.1.1 that you can use for periodic maintenance such as removing old log files and archives, clearing caches, etc.
For emergency repairs install the freeware utility Applejack. If you cannot start up in OS X, you may be able to start in single-user mode from which you can run Applejack to do a whole set of repair and maintenance routines from the command line. Note that AppleJack 1.5 is required for Leopard. AppleJack 1.6 is compatible with Snow Leopard. There is no confirmation that this version also works with Lion.
When you install any new system software or updates be sure to repair the hard drive and permissions beforehand.
Get an external Firewire drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
1. Carbon Copy Cloner
2. Data Backup
3. Deja Vu
4. SuperDuper!
5. SyncTwoFolders
6. Synk Pro
7. Synk Standard
8. Tri-Backup
Visit The XLab FAQs and read the FAQs on maintenance, optimization, virus protection, and backup and restore.
Additional suggestions will be found in Mac maintenance Quick Assist.
Referenced software can be found at CNet Downloads or MacUpdate.
Additional Hints
Be sure you have an adequate amount of RAM installed for the number of applications you run concurrently. Be sure you leave a minimum of 10% of the hard drive's capacity as free space.
Add more RAM. If your computer has less than 2 GBs of RAM and you are using OS X Leopard or later, then you can do with more RAM. Snow Leopard and Lion work much better with 4 GBs of RAM than their system minimums. The more concurrent applications you tend to use the more RAM you should have.
Always maintain at least 15 GBs or 10% of your hard drive's capacity as free space, whichever is greater. OS X is frequently accessing your hard drive, so providing adequate free space will keep things from slowing down.
Check for applications that may be hogging the CPU:
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
Often this problem occurs because of a corrupted cache or preferences file or an attempt to write to a corrupted log file.

My start up disk is almost full, but I have deleted everything I can find - I think that when I upgraded my software it has saved the old one - anyone know how I can find and delete it?

Hi All,
Late last year I upgraded from tiger to leopard (very out of date I know) but ever since I have been getting warnings that my startup disk is full. I have deleted loads including pictures and itunes but still get the same mesage. I think when I upgraded the old version was stored somewhere and this might be causing the problem. Does anyone know where I would be able to find and delete - or alternatively have any other suggestions for what the problem may be?
Many thanks

WOW
80GB is a very small drive.
Sorry Noondaywitch, but omni disk sweeper isn't going to install in the space remaining, without more problems.
My Suggestions
1. Get a large (400GB+) USB hard drive
2. Copy all the contents of your home directory to the USB drive.
3. Delete all your files from your home directory on your computer after making sure everything transferred ok.
4. Perform a clean (destructive) install of Mac OSX and then the applications you need.
5. Check how much space you have left.
6. If there is less than 50% of the HDD space left (35GB or so), then consider replacing the HDD with a new larger one. If it's a white intel mac book, then this is very easy, and instructions how to do it are included in your 'everything else' wallet with your OSX DVDs etc.
7. If you can't replace the HDD, then it's time to consider a new machine i'm afraid.
Hope this helps
Justin

Would anyone know why Premiere just deleted all my footage from my hard drive?

I started a project and imported the footage, put it on my timeline and found out I had the wrong settings. I started a new project with different settings and imported the files, put them on my timeline and then the files on my hard drive started to copy themselves. I was getting a copy of every file I shot on my hard drive. I cancelled it and then every file it didn't make a copy of disappeared from my hard drive and I cannot find the footage anywhere. Does anyone know what crazy, horrible thing just happened?

For the future...you did not need a new Project. A new Sequence with correct settings would have been the way to deal with it.
Apart from Project Managing and Offlining Ingestedf Files ( Delete Option)..I cant think of any way that PPRO would have deleted your sources files

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

A year ago I brought a 1 TB hard drive (My Passport), I have not used it for over 4 months and now when I use the USB cord to connect it to my mac, it does not register the hard drive. Does anyone know why this is happening?

The beeps could be caused by something as simple as a loose internal wire or connection. If it is under warranty (not sure how long that is, as WD drives range from 1 to 5 years depending on the model's series - I think "my passport" drives are 3 years) you could contact WD and ask them about it.
If it is out of warranty, you could also try opening the case and check the connections - the drive may be fine, and there have been posts on TomsHardware forums of people getting the beeps, opening up the case and the drive is fine, just some wire worked loose.

I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread. Yet I have read all the emails. Still the iPhone thinks they are unread. Does anyone know how I can delete all of these at one time?

I just got my new iPhone4 set up today and it has pulled in every email that is in my desk top as being unread. Yet I have read all the emails. Still the iPhone thinks they are unread. Does anyone know how I can delete all of these emails at one time from the phone?

I have taken it back to the Apple store genius bar, but they say they don't see anything wrong. Well unless you use it all day and experience the problems when they happen, you wont see anything wrong. But there are lots wrong with it. But this would be the same store as I purchased the phone. And they backed up my old Iphone 4, but were not able to get anything to load back onto my new phone. So, I lost pretty much everything. But over time, some of my contacts have started showing up, although i am still missing over 800 of them.

My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?

My hard drive on my MacBook Pro stopped working and I had to replace the hard drive. I cannot get my playlists and photos to appear in my iTunes and iPhoto. Does anyone know how to resolve this?

Peace Lilly wrote:
... Will I loose everything if I connect the iphone to the itunes as a new device?
To avoid that...
See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book mo

Does anyone know how to simply edit the text in the spine of hard cover, 40 page book in the book module? I can click into any other text window and edit and change attributes but I am locked out of editing text when it comes to the spine of the book. I spoke to Blurb support and they referred me to Adobe. I spent 45 minutes with support here - no one knew. I am still waiting for a call back with an answer... not holding my breath as it's been a few hours now. HELP!!!

Thanks for your reply John. I have experienced all the fiddly aspects you mentioned - these are attributes and although changing them requires the skill of a surgeon's hand - it's the actual editing of the text I can't seem to access anymore. The box just won't allow me to do anything except change attributes. Does that make sense? And it's only on the spine where I am having this issue. Puzzled! I have even rebooted the program and just now the computer - to no avail.

Following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?

following hard drive failure on iMac running Maverick I have recovered from TimeMachine backup but now app store does not connect. All other internet connections normal. Does anyone know of a fix?
Also mail not loading. The error report suggests that I look for updates from the app store?

http://www.apple.com/support/mac/app-store/contact/

I have WD 1TB and use Time Machine for the past 2 years. Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

Now I have multiple folders in my external hard drive and want to know how to condense all folders into yearly folders instead. Anyone know how to do this?

anthonycancel wrote:
I want the folders I already backed up to come together into one folder when that year is over. Is there a way to manually do that or automatic through TM?
I'm quite sure there is no "automatic" way to do this. I've never heard of anyone trying it either. I suppose if you wanted try it, you could simply create a new folder in the same partition TM is on, label it for that year, then gather all the days for that year and drag/drop them into the folder. I suspect (but do not know) you'd be risking the continuity of your backups, meaning TM would simply start over again, meaning that next back up would start a new series of backups, with the first one roughly equalling the entire capacity of your internal HD, instead of adding only the new data to the previous backup. Once again, I would recommend against it, unless you're fine with TM starting a new series of backups if it doesn't work out the way you want it to. Hope you'll post back with results so we can learn from it.

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

I am semi-retiring my old mac mini and want to use it as a hard drive for my macbook pro. Does anyone know how to do this?

1. Remove the drives, install them in external enclosures.
2. Use a Firewire cable to connect to your computer. Boot the mini into Target Disk Mode - Transferring files between two computers using FireWire

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

My hard drive died last week, and I needed to install a new one. Previously, I was able to save a .doc with text and inserted photo to .pdf and then to .jpg. Now I can get the .pdf but can't determine what to do to convert to .jpg. Does anyone know ?

Rather than do that, which means starting over from scratch, losing all your edits, organisation and so on, why not simply use iPhoto Library Manager to revert the Library to the older version? Easier, less destructive.
The instructions on that are here
If you really want to start over: you can access the Originals folder simply by going to your Pictures Folder and finding the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.

I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

I am trying to use Time Machine to back-up to an external hard drive and I get the following message.Unable to complete backup. An error occurred while creating the backup folder. Does anyone know what I should do?

Hello Drake, I suspect one or more of the Drives needs repairing, but...
Have you looked through Pondini's extensive TM help site?
http://Pondini.org/TM/FAQ.html
http://pondini.org/TM/Troubleshooting.html
Can't imaging something not being covered there.

I used to be able to pull photos from my iphone into my itunes but something has changed. I dont remember how I did it before but I think an option is missing. Does anyone know what the process was for moving pics from your iphone to your itunes?

I cant download the new iTunes soflware on my PC because I have not yet been able to sync my photos from my phone to my itunes. If I update to the new software on my pc, for some reason I can't then update my phone software. What Ive had to do the past few times is go the the Apple Store and have them load the new iTunes on my phone for me but then that means I lose all my pics. I dont remember how I used to get my photos from my phone to my itunes but i know i used to be able to. I think I lost some of my options. Does anyone know what this could be? PS: I have the iphone 3g and Windows XP on my PC

Refer to this article under section 4: Verify that the Apple Mobile Device USB Driver is installed
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections. Does anyone know their way around this obstacle? Thanks!

Using Mac OSX Install Disc 1, I am not able to get any further than the Partition tab. It allows me to select my hard drive selection, but will not allow me to make any other selections such as options. Does anyone know their way around this obstacle? Am I doing anything wrong? Thanks

Hello, The Hatter, I read about the 'trick' of backing up, erasing, and restoring too, but I figured it would take longer than defragmenting the disk.
But the defragmentation process has just finished! so I'm gonna try to run Boot Camp again soon!
Thanks for your helpfulness, anyway.
And P.S. I didn't clone my system onto the external drive, I just inserted the Mac OS X Install CD, rebooted holding down the "C" key, and installed a fresh Snow Leopard system onto the predetermined partition. I will use that in cases of emergency, when my main/internal system becomes unusable.

A Little Secret Hardly anyone knows (I think)

Similar Messages

Maybe you are looking for