"A long distance company access code is required"

I just spent half an hour on the phone (the landline) to fix an issue with the DSL setup, and during that time the call was a bit fuzzy. The customer support agent tested the line after we hung up and called back to let me know she didn't find any problems, so I tried putting a different filter on the line in case that was a problem. I called my wife's cell phone so that we could check clarity and then got this message: "a long distance company access code is required". Ok, weird. I called my own cell phone, which has the same area code as the landline, and got the same message. I thought I had nationwide calling? What's the deal? I tried calling customer support again, but the automated support said I would need to have someone come out and check the line at the risk of having to pay charges if the problem was on our side- since I'm not sure the computer knew what my problem actually was, I didn't want to risk it.
We just activated everything today. Anyone have a clue what'd going on?

A little-known secret is that the Verizon Access Code (dialed before the number) is 1016963 .
Out-of-state (but expensive), try the AT&T Access Code -- 1010288 .
For DSL-service without a dial-tone, ask for "Dry-loop Service".
With DSL, try paying Verizon $7.99 per month for "Inside Wire Maintenance" -- otherwise, when there is a problem with the flaky DSL and a service-call is necessary, they may claim that the problem is in your inside wiring, and charge you $100 for each Service Call !
DSL degrades the further your location is from the "hub-facility".
The maximum distance from the DSL "hub-facility" is about 18,000-feet (as the wire-travels) -- anything beyond that, and you may experience frequent drop-outs !

Similar Messages

HT201365 I updated my software Wide. The update completed but when I wanted to open the device access code is required, I typed in the code can be wrong then the device is locked . at pelefon .said the solution is to delete everything on the

I updated my softwarew in my iphone. The update completed but when I wanted to open the device, access code is required, I typed . the code, it can be wrong i try again but then the device is locked. at pelephone corporetion said the solution is to delete everything on the device and
. Reinstall the software
. Is there no other solution' may be i can cancel the code

You can only add music to iTunes Match from your iTunes library on your computer, not from your iOS device. If you have music on your iPad that is not on your computer, you'll have to import it to your iTunes library on your computer to add it to iTunes Match.
Music purchased from the iTunes store can be imported directly to your iTunes library by authorizing your computer for the Apple ID(s) used to purchase the music (in Store>Authorize This Computer), then connecting the iPad to your computer, opening iTunes and going to File>Devices>Transfer Purchases. Music from other sources will require using 3rd party software to transfer to your computer, such as Touch Copy.

HT2736 Access code for a gift?????

I sent a gift song to someone and she said an access code is required in order to open it. What is that????

You sent this gift to the recipient's email address. The recipient has received an email and in that email is a code the person would be using to redeem the gift.

How do I uninstall Firefox, it says i need adminstrative access code

when I go to the uninstall under programs and right click - every other program in the world "uninstalls" however this one say "run" and has the word Administrator and says something about not having access too all parts of this program
how do I REMOVE THIS

I have not heard of any access code being required...
Try using the helper.exe file. Open the following folder:
C:\Program Files (x86)\Mozilla Firefox\uninstall
Then double-click helper.exe to run it normally. If you get the same error, cancel out and try this:
Right-click helper.exe and choose "Run as administrator"
Can you get it to run?

Access Code for Long Distance

I am unable to make long distance calls. Each time I try I get a recording stating the access code I entered isn't valid. What does this mean? I've never heard of using an access code for long distance.
Thanks in advance for your help.

Could be mistake.
You could have been slammed by another phone company.
You didn't identify your type of phone service. E.g Fios Digital Voice, Verizon Freedom Plan, etc..
Remember you are talking to peers here. Most likely you will need to use the CONTACT US button on any of the verizon webpage.
http://www.verizon.com/support/residential/contact-us/index.htm

How to maintain code of 'requirement' of access sequences in SD pricing???

Hi everyone,
I have an assignment to maintain the code of 'requirement' of access sequence in SD pricing procedure...
and I know that the 'requirements' are pieces of code attached to an access sequence to determine whether or not a certain
access level should be executed.
And we can display the codes of SAP predefined 'requirements' with the TCODE VOFM,
but when i try to enter new requirement number , it just terminated with a ERROR msg: u r not allow to maintain SAP standard requirement...blabla... So i am confused how to do this
please help me, thanks...
Richard

Hello,
This is due to requirement numbering...
1 - 899 numbering reserve for SAP standard to be used...
900 -> onwards are for customer specific enhancement
Please try to use this...
Thanks.

Accessing Oracle DB at multiple location(long distance)

Hi guys,
I have a situation where i need to connect to oracle database which are at long distance(say singapore and UAE). Structure of database is same.
Which is the better way to implement.
1. Using seperate connection for database
Connection conSingapore
Connection conUae
and use diff Statements
or
2. replicating database at single location and accessing centralized database.
Second option is easy as far as java program is concern but what abt replication process? This may cause synchronization(data inconsistancy) problem. Can we use DB link or Materialized views? Has anybody heard tht?
Is there any better way to overcome such situation.
Please help incase anybody has good idea.
Thanks in advance

If I get your intention correct, I would advise to pass in the URL of the db at runtime. That is if you are using the thin driver, you can use the following :
DriverManager.getConnection(url,userName,passWord);you can specify the Database details on runtime so that the connection to the corresponding DB is made.
GoodLuck,
Sekar

Connecting to WiFi when there is no access code required

I have a Samsung Galaxy Nexus with ICS. I'm still learning how to use it and have run into a problem with connecting to some wifi locations. When I connect to a wifi that requires an access code, I have no problem, but when I try to connect to a public wifi that does NOT require a code, I can't seem to make that work. How do I tell it that there is no code required?
Regards,
srevi

if its an unlocked wifi it might not have data connected to it

Action Required: Your Microsoft Certification Access Code Is About To Expire

Hello Sir .
Sir i received an email with the title "Action Required: Your Microsoft Certification Access Code
Is About To Expire"
sir the email have guide for me to log in to MCP website .
According to this email i have received an email that contain information about MC ID and ACCESS code for MCP website.
But sir i don't received any email containing that information.
So what the solution for me .
how MS can resend the email that contain information about MC ID and ACCESS CODE.
because i have not received any email like this.
Thank you sir.

Hi,
Please contact you Microsoft regional support center and explain your issue to them:
http://www.microsoft.com/learning/en-us/help.aspx
Danny van Dam
MVP, MCC

Help please with access code to get into restrictions to delete apps.

I have an iPad 2. I recently upgraded to 7.0.4. The new system requires me to go to settings/general/restrictions to delete any apps I do not wish to keep. This worked fine at first, after the first system upgrade to 7.0. After the last update, 7.0.4, I find that when I go to restrictions it pops up and asks me for an access code. I only have one access code that I have ever used. It will not open with this passcode. He has locked me out 18 times and requires me to wait an hour to try again. My usual passcode works on everything else! I have tried to reset passcode, it does the same thing. I have searched and searched and the answers I'm finding are pretty drastic (like backup and reset everything...yikes!). What am I missing here?

Follow the instructions in iOS: How to back up your data and set up your device as a new device http://support.apple.com/kb/HT4137 to restore the device to factory settings.
Once you have setup the device as a new one, you can then sync it back with your iTunes account and all your music, apps, contacts and any other content sync'ed with iTunes will be loaded on the device. Any content that is stored only on the device and not sync'ed with iTunes, like app logins or data, will be lost during this process. Be forewarned that this is a long process and can take a couple of hours or more to complete. This can be painful, but it is necessarily so to prevent users from working around the security settings. After the restore is complete, you can setup a new Restrictions passcode. Make a note of the passcode to avoid this situation in future.
 Cheers, Tom

Access-code setup on a router

I have a VOIP network. At a remote site I have a router that has 4 fxs ports that attached to a key system unit. The issue I am having is to be able to give to all these CO type line an access code that a user can dial in order to dial long or international long distance.Do such thinf exsist.The software on the router 26XX-XM is not the call manager express. Just plain IP plus.
Thanks

I might be wrong here but I don't think such a thing exists.

Long Distance Calling & Voice-over IP

If I am running my blackberry thru my wireless router, can I make long distance calls for free? I heard that if you're in a foreign country and you hook into wifi that your calls are free as well...true?

UMA = Unlimited Mobile Access.
Yes, if you have UMA on your device, if you are in, say Germany, and you have a WiFi connection and UMA on the screen, when you make a call to anywhere, in this case pretend you are calling back to the USA.
The call is made via WiFi/UMA, and the call is connected to a router for the WiFi network you are on, and then direct back to a Tmobile network center in the USA. Then the call is connected to your party via the normal phone network. Because the call now "originates" from the Tmobile service center in the USA, the call is a local in-nation call.
Say you are in Germany, and you call Japan. Same story, the call orginiates from the Tmo service center in the US, and you are charged for a US --> Japan call, rather than Germany > Japan, which in most cases can be advantageous for your rates.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Long-distance problems with 7912 series

I'm able to configure the clients 7912 phone with full long-distance access without entering a code. The problem is this. Once I configure the phone for the client to enter the access codes, it says "long-distance redialling or dialling from the second line is currently unavailable. Please use your primary extension." There is only one extension on that phone and it is the primary.
Any help would be appreciated.
Thanks
Any help would be appreciated.
Thanks

The calling search space is correct. This is the only phone that has this problem.

Cisco 4500 Chessis Switch with sup 7l-e supports VSS for long distance upto 40 Km

Hello Team,
hope you will find this massage in good health and spirit.
As per my understanding, Cisco 4507R+E with Sup-7L-E will supports VSS for long distance upto 40 Km, i have a scenario that there are two Data Centre of a Company at different graphical location (distance is 2 Km), both have separate network devices but distributed servers connectivity and all servers accessed from both location (some servers are placed in location 1 and some servers are at location 2), both location has separate ISPs link with segregation of internet connectivity (some users using internet from ISP-1 and other are using ISP-2), Core Switches of both location connected to each other via fiber (company fiber not ISP), at this moment Core Switches are configured with multi-group HSRP and next upgrade to VSS.
My concern is if Virtual Switch link (VSL) goes down (which will configure on company fiber link) what is the behavior of Switches, both are in Master mode and working standalone or behavior are different, please confirm and suggest for better.
Regards,
Ammar Ud-Din

does anyone reply me on this......

I am trying to re load Lightroom 5.7 frommy outside hard drive to my new hard drive . I am able to reach a certain point in the download and I am then asked for the access code which I do not have. I had upgraded on line from Lightroom3.

Hello,
I just had the hard drive on my computer replaced, and the Lightroom5.7 and Photoshop cannot be sent over from the outside hard drive without an access code!! Now what do I do? Will Adobe have a record of my Lightroom3 download and my 5.7 upgrade?

If you took the time to register your software on the Adobe web site, then you can log on and retrieve your serial numbers.
Find your serial number quickly
You ought to be able to retrieve the serial numbers from your first hard drive ... that requires knowing what your operating system is and if the first hard drive actually is readable.
And if none of that works ... well then I think you're way out of luck.
Might I suggest you adopt a new method of keeping track of your serial numbers, not just for Lightroom but all of your software? I suggest you create a computer text file named serialnumbers.txt, containing all of your serial numbers, stored on your computer and in a cloud backup service (like DropBox which is free) so that you will never lose it.

"A long distance company access code is required"

Similar Messages

Maybe you are looking for