A lot of FTP get/put problems using CS6

I switched from CS5 to CS6. CS6 is using my CS5 site definitions automaticcally, FTP access etc. These project definitions are working good in CS5, so they are also good on CS6.
But using FTP in CS6 gives me a lot of problems. It's neary unworkable sometimes. You never now when a upload succeded. You don't get an error message or a warning. Sometime you see on de FTP logs the message 'Canceled by the user'. I'm sure I never did that!.
If you click in the 'external server' window, to open a server folder, the system doesn't respond, and doesn't open the folder.
If you right click and say download, the systems respond, no file fouund on server.
What I do is to use F5, reload, then it works shortly. I can upload / downland one or two files. And the same problems are starting again.
When the Adobe Application Manager is running in the background, downloading software or updates. Dreamweaver CS6 FTP has even more problems. I find it very irritating that you need to stop working while Adobe Application Manager is busy.
Other people experience these strange problems?
Pieter
I'm using Windows XP.

Pieter,
Other people experience these strange problems?
Maybe yes, but not with the exact same symptoms, I guess.
When something doesn't work the way it should, first things first - clear your cache: http://forums.adobe.com/thread/494811
See if that fixes it.
AAM (Adobe Application Manager) and DW - I haven't come across with any dependancy issues so far.
Is the upload issue happening for all sites or just one? If it is just one, can you try checking with a different site?
The problem usually may also lie with the remote server end? Are you able to connect to the server via a 3rd party FTP - something like Filezilla? http://filezilla-project.org/
-ST

Similar Messages

CSS 11501 ftp server setup problem using non-standard port

Dear Expert,
we would like to setup FTP server over CSS where our member sever use non-std-port to open both control/data channel (i.e. 6370 as ctrl and 6369 as data this case.) but seems we only get Passive mode FTP mode work only but not for Active mode FTP case for data channel establishement for server back to client...is there any professional advise can help on this case...? here is our setup info FYI
# sh ver
Version:               sg0820501 (08.20.5.01)
Flash (Locked):        08.10.1.06
Flash (Operational):   08.20.5.01
Type:                  PRIMARY
Licensed Cmd Set(s):   Standard Feature Set
                       Secure Management
CVDM Version:          cvdm-css-1.0_K9
!*************** Global
ftp data-channel-timeout 10
ftp non-standard-ports
!************************** SERVICE **************************
service ftp_ftpgtw
keepalive maxfailure 2
keepalive frequency 15
keepalive retryperiod 2
keepalive type tcp
ip address 192.168.52.170
protocol tcp
keepalive port 6370
port 6370
active
# sh run group drfusegtwftp_grp
!*************************** GROUP ***************************
group gtwftp_grp
vip address 192.168.52.28
add service ftp_ftpgtw
active
content ftp_gtwpkg-ftpgtw
    add service ftp_ftpgtw
    vip address 192.168.52.28
    port 21
    protocol tcp
    application ftp-control
    active

Thanks for your confirmation on no prob found in config level 1st..:P..as to save us a lot of time in isolating problem at this level.
What we can notice is seems the data port connection is fail to open for server back to client....for our general sense..... the flow expected should be:
TCP session A -- Client:1234 --> VIP:21 --> member svr:6370
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 6379 [on demand generated between server/client]
but we can only see session B fail to setup when client side access VIP site on CSS..even we try to put the most standard case as below
TCP session A -- Client:1234 --> VIP:21 --> member svr:21
TCP session B -- Client: 5678 <--> VIP:20 <--> member Svr: 20
we still unable to make the Active mode FTP access work either...hence we got no idea on how CSS handle FTP access when it involve services over multiple tcp ports..
and from CSS xlate view...the problem is we can only see what NAT IP that used in CSS connect to client...but no way to confirm for which port for VIP using outgoing to client. neither it is dropped by CSS..nor it is never setup from VIP to Client side.

CS5 color print problem using CS6

I upgraded from CS5 on XP to CS6 hosted on Windows 7, 64 bit. Images loaded into my new CS6 system from my camera or the web display and print perfectly. I am using the same printer for CS6 as I did for CS5, an Epson 3800. However, when I open and print older CS5 generated images using CS6, the images print with what appears to be reversed grey tones and off color but the monitor displayed colors appear just as good as they did on CS5. In summary, images generated in CS6 print ok, but images generated under my old CS5 system print with off colors using CS6 but display ok. Thanks for your suggestions and help.

Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop General Discussion forum, where you'll get more specialized help.
To help others help you, please read through this article and provide any additional relevant details.

Hi, I getting the Problem using Flash Foms

Hi, I am having a Problem with the flash forms.
When i try to load them, the movie is not loaded. I do not
know what is the problem,
plz check it. i am using three browsers, mozilla, firefox,
opera, IE 7
here is the code:
and one thing if i remove the thing like:
<cfsavecontent variable="checkCaptcha">
var myCaptcha =
<cfoutput>#easyCaptcha.IMAGE#</cfoutput>;
if (_root.secret.text == myCaptcha) {
_root.submit.enabled = true;
}else {
alert("Sorry you miss entered the secret word please try
again.");
</cfsavecontent>
and from
<cfinput type="text" name="secret" size="10"
message="Image Verification failed" label="Verification Code:"
validateat="onSubmit" required="yes" onBlur="#checkCaptcha#" />
onBlur="#checkCaptcha#" the form works fine...
plz help me from this error:

To Contact iTunes Support...
Use this Link > Apple Support iTunes Store Contact

Problem using CS6 via network

We are currently experiencing playback issues (sound and vision stuttering/out of sync) when using Adobe Premium Pro CS6 and .MOV files in a new project from our Network File Server (Microsoft Server 2008 R2). I am running a PC with specs which meet Adobe’s minimum requirements however I am on a domain on a 100MB Network link. I have tested using the .MOV files locally and receive no playback issues. Are there any settings which need to be changed to allow or help using files on a network? Or does Adobe not support that? Other discussions I found all seemed to refer to CS5.

Until Adobe Anywhere is released, the recommendation is to use only local storage.
http://tv.adobe.com/watch/adobe-anywhere/introducing-adobe-anywhere-for-video/

HT1206 Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

Lots of info about one user using multiple computers. What about multiple users with separate Apple IDs using same computer? Having problems getting my wifes new iPhone talking to her apple account on the computer we share (2 users)

You need to create a user account for your wife (or yourself depending on who has the current user account). When syncing, each of you should sign in as a separate user, login to iTunes and then sync. I had this problem when my sister got an iPhone. When we did her initial sync, everything on my iPhone showed up on hers. Apple gave me this solution.

Get/put dynamic file name using FTP

Hi Friends,
I am currently using FTP_Connect, FTP_command and FTP_disconnect to get/put a file from a remote server.
But the file name was changed to add a date/time stamp.
So the filename became dynamic (example from 'test.txt' to 'test_200512160800.txt').
I tried using get test. but my FTP command failed. Do you know anyway of doing this?
Thanks.

Hi Lego,
here's another sample for the fm:
REPORT ztest_epsf.
PARAMETERS: date LIKE sy-datum,
            dir TYPE epsf-epsdirnam,
            pattern TYPE epsf-epsfilnam,
            zid   LIKE vers_dest-rfcdest.
DATA dir_list LIKE epsfili OCCURS 0 WITH HEADER LINE.
DATA cnt_file TYPE epsf-epsfilsiz.
DATA err_file TYPE epsf-epsfilsiz.
START-OF-SELECTION.
IF date IS INITIAL.
    date = sy-datum.
ENDIF.
*build pattern with input-pattern and date
CONCATENATE pattern date '*' INTO pattern.
*search for files in foreign system
CALL FUNCTION 'EPS_GET_DIRECTORY_LISTING'
       DESTINATION                   zid
       EXPORTING
            dir_name               = dir
            file_mask              = pattern
       IMPORTING
            file_counter           = cnt_file
            error_counter          = err_file
       TABLES
            dir_list               = dir_list
       EXCEPTIONS
            invalid_eps_subdir     = 1
            sapgparam_failed       = 2
            build_directory_failed = 3
            no_authorization       = 4
            read_directory_failed = 5
            too_many_read_errors   = 6
            empty_directory_list   = 7
            OTHERS                 = 8.
WRITE: / pattern.
ULINE.
LOOP AT dir_list.
    WRITE: / dir_list-name.
ENDLOOP.
ULINE.
WRITE: / cnt_file.
WRITE: / err_file.
pls reward points for useful hints.
thanks and
regards Andreas

Please help me!!!! my macbook pro 15 running on mountain lion is hanging a lot...sometimes when i use any app than it get freeze for some seconds...what should i do?

please help me!!!! my macbook pro 15 running on mountain lion is hanging a lot...sometimes when i use any app than it get freeze for some seconds...what should i do?

Hardware Information:
          MacBook Pro - model: MacBookPro8,2
          1 2.2 GHz Intel Core i7 CPU: 4 cores
          4 GB RAM
System Software:
          OS X 10.8.2 (12C60) - Uptime: 0 days 1:17
Disk Information:
          TOSHIBA MK5065GSXF disk0 : (500.11 GB)
                    disk0s1 (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 499.25 GB (424.92 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
          HL-DT-ST DVDRW GS31N
USB Information:
          Apple Inc. BRCM2070 Hub
                    Apple Inc. Bluetooth USB Host Controller
          Apple Inc. Apple Internal Keyboard / Trackpad
          Apple Inc. FaceTime HD Camera (Built-in)
          Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
                 [failed] com.apple.coresymbolicationd.plist
Problem System Launch Agents:
                 [failed] com.apple.afpstat.plist
                 [failed] com.apple.AirPlayUIAgent.plist
                 [failed] com.apple.coreservices.appleid.authentication.plist
                 [failed] com.apple.rcd.plist
Launch Daemons:
                 [loaded] com.adobe.fpsaud.plist
                 [loaded] com.adobe.SwitchBoard.plist
                 [loaded] com.google.keystone.daemon.plist
                 [loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
                 [loaded] com.adobe.CS5ServiceManager.plist
                 [loaded] com.google.keystone.agent.plist
User Launch Agents:
                 [loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
                 [loaded] com.facebook.videochat.Akshay.plist
                 [loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
          Sony Ericsson Bridge Helper
          BitTorrent
          uTorrent
3rd Party Preference Panes:
          Flash Player
          Java
Internet Plug-ins:
          AdobePDFViewer.plugin
          AdobePDFViewerNPAPI.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          googletalkbrowserplugin.plugin
          JavaAppletPlugin.plugin
          npgtpo3dautoplugin.plugin
          QuickTime Plugin.plugin
          SharePointBrowserPlugin.plugin
User Internet Plug-ins:
          Google Earth Web Plug-in.plugin
          Picasa.plugin
Bad Fonts:
          None
Top Processes:
          14.6 %          WindowServer
          6.9   %          coreaudiod
          6.4   %          uTorrent
          1.9   %          WebProcess
          1.4   %          iTunes
          1.2   %          EtreCheck
          0.5   %          fontd
          0.2   %          NotificationCenter
          0.1   %          Dock
          0.0   %          Microsoft

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message 'An error as occurred. Please try again later'. It has been this way for some weeks. I don't have this problem using Safari or Opera.

When ever I try to watch any video, from a link or YouTube say, using Firefox, I get a message ‘An error as occurred. Please try again later’. It has been this way for some weeks. I don’t have this problem using Safari or Opera.

I believe that our “Werbung problem” adds an additional second hyperlink to the pop-up window. This second link is activated whenever you trigger a saved hyperlink to a Mail.com site.
I had the same problem and eliminated it by deleting all bookmarks, hyperlinks and automatic links that take firefox to a mail.com address. So I just deleted all bookmarks I had saved for mail.com. I also changed my home page link because it also went to my email at mail.com. I then did a warm boot, opened firefox and re-saved my bookmarks and homepage to the desired addresses. Good luck.

Problems using java.xml.xpath - How to get values from DTMNodeList?

Sorry for the waffle in the subject title, but I was unsure what to call it. I hope this thread is in the correct forum.
I'm having problems using xpath to parse some data from an XML file. I am able to create an expression which obtains the elements I wish to retreive, but I'm unsure on how to go about getting their values. So far I have..
public int getTerms(int PMID)
          String uri = "http://www.ncbi.nlm.nih.gov/entrez/eutils/efetch.fcgi?db=pubmed&id="
                       + PMID + "&retmode=xml";
          // Create an XPath object with the XPathFactory class
          XPathFactory factory = XPathFactory.newInstance();
          XPath xPath = factory.newXPath();
          // Define an InputSource for the XML article
          InputSource inputSource = new InputSource(uri);
          // Create the expression
          String expression = "/PubmedArticleSet/PubmedArticle/MedlineCitation/MeshHeadingList/MeshHeading/DescriptorName";
          // Use this expression to obtain a NodeSet of all the MeSH Headings for the article
          try
               DTMNodeList nodes = (DTMNodeList) xPath.evaluate(expression,
                     inputSource, XPathConstants.NODESET);
               int length = nodes.getLength();
               String[] terms = new String[length];
               // Test mesh terms are being stored.
                *for (int i=0; i<length; i++)*
*                    System.out.println(i + ": " + nodes.item(i).getNodeValue());*
                                                return nodes.getLength();
          catch (XPathExpressionException e2)
          { System.out.println("Article with PMID " + PMID + " has no associated MeSH terms");}
          // return a default
          return 0;
     } The part in bold is the problematic code. I wish to retreive the values of each of the nodes I have taken into my DTMNodeList using a for loop to iterate through each node, and use the getNodeValue() method from the Node class which should return a string. However, the values I retreive are NULL. In the test document I use, the elements do have values.
Here is a snippet of the XML file I am reading in:
<MeshHeadingList>
<MeshHeading>
<DescriptorName MajorTopicYN="N">Binding Sites</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Chromatium</DescriptorName>
<QualifierName MajorTopicYN="Y">enzymology</QualifierName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="Y">Cytochrome c Group</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Electron Spin Resonance Spectroscopy</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Flavins</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Heme</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Hydrogen-Ion Concentration</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Iron</DescriptorName>
<QualifierName MajorTopicYN="N">analysis</QualifierName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Magnetics</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Oxidation-Reduction</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Protein Binding</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Protein Conformation</DescriptorName>
</MeshHeading>
- <MeshHeading>
<DescriptorName MajorTopicYN="N">Temperature</DescriptorName>
</MeshHeading>
</MeshHeadingList>Any help would be appreciated.. thanks :-)

Answered my own question....
The element value is actually the child of the node I am current at, so instead of doing:
i + ": " + nodes.item(i).getNodeValue()); I should have really done:
i + ": " + nodes.item(i).getChildNode().getNodeValue());

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fa

I'm using the latest photoshop cc 2014 with most updated camera raw... i am having A LOT/REPEATED trouble getting files to "synch" with corrections, no matter what i options i select (i.e. "everything")... WTH is wrong with me/my computer/adobe?! help. fast. please

BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Until recently I was able to send images in the body of my Yahoo emails. Now, I am getting the message "This message has been truncated", and the email does not go through. I do not have this problem using IE. Could you please help? Thank you.

Try this -> http://support.apple.com/kb/TA38632?viewlocale=en_US

My airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW.

my airport extreme has connected to a Tplink router, i set my AE in Create network, so i get a problem of Double NAT. How can i repair this probleme because i have to use TPlink for my IP TV and i want to use AE to creat my network and the guest NW. If we don't have a solution for this question, can i set my AE to use the IP TV and how??? I'm using a 4th Airport extreme

No, not unless it is simply a network connection.
How is your IPTV being provided.. if it is using a separate vlan or separate vpi/vci in the adsl connection. Who is your ISP?
Is the TP-Link ADSL?
Is the IPTV using a separate voice channel on adsl?
Or a different vlan.
Sorry but it is something where a definite answer is not possible unless you provide all the details.
The setups are unique to each ISP around the world..
Here is one for our local ISP.
http://www.avenard.org/iptv/Setup.html
He has a section on getting this working with apple router over wireless.. look
http://www.avenard.org/iptv/IPTV_and_Wireless.html
Google around and see if other people have had success.. the whole setup is tricky.. and it is hard if nobody has used it who actually understands networking.

Problems using GET method in JSP

Hi,
I had some problems using GET method in JSP.
I'm using Apache web server 1.3 and Tomcat 3.3.1 in windows 2000.
And I'm using language English and Korean.
When I send messages using POST method, all is good
But when I send message using GET method, English is good, but Korean is not good.
I tried to encode using
URLEncode.encode(str, "UTF-8")
and decoding it using
URLDecode.decode(request.getParameter(tag), "UTF-8")
but it didn't work.
How can I receive request including Korean using GET method in JSP?
If anyone have solutions, please let me know.
thanks.

Hi,
I had some problems using GET method in JSP.
I'm using Apache web server 1.3 and Tomcat 3.3.1 in
windows 2000.
And I'm using language English and Korean.
When I send messages using POST method, all is good
But when I send message using GET method, English is
good, but Korean is not good.
I tried to encode using
URLEncode.encode(str, "UTF-8")
and decoding it using
URLDecode.decode(request.getParameter(tag), "UTF-8")
but it didn't work.
How can I receive request including Korean using GET
method in JSP?
If anyone have solutions, please let me know.
thanks.This problem appears, when one use UTF-16 encoding in JSP - am I right?
If so there are two solutions:
1) Temporary: Use "UTF-8" - or any other 8 bit encoding scheme and
encode Korean symbols with "&1234;" kind of escapes - though it
may not work
2) Absolute: get my piece of code, which I have managed to write
just a month ago resolving absolutely similar problem with UTF-16
in code using Chinese/Russian/English encodings
But I wouldn't say that it's costs 10 DDs :) - it's much more
expensive... So try 1st variant if it wouldn't help - let me know.
I'll figure :)
Paul

Facing severe problem in IE10 of automatically getting clicked on "use a proxy server" every 5 minutes in LAN Settings whereas it is not required to use any proxy server at all when directly connected through ISP broadband.

Using Window 8 Pro with IE 10 but facing tremendous problem in LAN settings. Every 5 minutes, it automatically gets clicked on "Use a Proxy Server for the LAN" and am unable to open any page unless the said setting is unclicked. The same applies
while using Chrome or Firefox browsers.... none of the browsers behave properly and have to repeatedly unclick on proxy server settings (in IE or Chrome) and change settings on Firefox.
Any suggestions to get rid of this problem...??? Thanks

Hi,
It seemed that some malware changed your registry which make proxy server enabled.
Did you install any proxy agent software recently? If you did, please try uninstalling it now. And then make a full scan
with malware removal tool.
http://www.microsoft.com/security/pc-security/malware-removal.aspx
Or locate to registry,
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings, set "ProxyEnable" = dword:00000000.
For more information, you can refer to
http://support.microsoft.com/kb/819961
Andy Altmann
TechNet Community Support

A lot of FTP get/put problems using CS6

Similar Messages

Maybe you are looking for