A.M.P.S. - problems seting up on solaris 10

help,
I am trying to setup A.M.P.S. ... I have managed to configure this setup on a windows 2003 server (with headaches) but got it working. (eventually) ... i have joined this list in the hope that someone out there will be able to help.
I am a Windows engineer with little unix exspereince (i've just bought the complete solaris 10 reference) - which has helped, but after managing to get apache 2 up & working i then installed php & related packages but was unable to get the "info" script to publish the php info ...
i will happily copy and parts of the httpd.conf file or the php.ini file that you wish to see ...
I am willing to reinstall the o/s then start from scratch adding the packages nesacery to get this setup working ... I am running solaris 10 (sparc) on a sunblade 1000 .... using php 5.0.4 ... and would ideally like a rundown similar to this on solaris 8 ...
http://ampubsvc.com/~meljr/a2m4p5s8.html
I haven't even looked at the mysql setup but beleive it may be possible to configure this at the sametime as php.
please help ... before i go insane ...

Sorry, Stephen, but I don't think you're going to get much help in this particular group of forums. They're strictly for issues on lumps of hardware.
Your question seems to be 100% software.
You just happen to be running Sun's OS on a Sun workstation.
You may get more information out of these <i>other</i> Sun forums:
http://forum.sun.com/index.jspa
Use the search function over there, keywords <u>apache + php</u>.

Similar Messages

Problem with IPSec on solaris 9

Hi all
I'm facing a problem with IPSec on solaris 9 that I didn't have with Solaris 8 (With the Security package installed).
I've an application that creates SA's by using the pf-key interface.
What it does is first doing a GETSPI to a specific SPI and a specific Destination IP Address.
This will create an SA and put it in a LARVAL state. After about a minute my application will do an UPDATE to this SPI and that command should change the state of the SA from LARVAL to MATURE but instead I get an error saying that this SPI & IP address already exist (errno = 17).
Well of course it's already exist that's the all point it should just change the state of an existing SA.
This exact scenarion was is working fine on Solaris 8.
Am I doing somthing wrong (maybe there is a package on the solaris 9 that I need to install ?)
or is this a bug in solaris 9.
If anyone has any idea on how to do that (without using a one step ADD for a new SA) I will be very thankfull.

Sorry for using reply for querying.
I got a problem in creating a Security Association using the PF_KEY Socket (first used SADB_GETSPI and got SPI,with SPI tried to update SADB_UPDATE).
Getting this problem on Sun Solaris 8.
It returns errno 122 . operation not supported.
Here is my mailId [email protected]
I got few more queries regarding PF_KEY socket.
Not much directions are available also for pf_key socket in internet.
Monitor produces the following error.
# ipseckey monitor
"Base message (version 2) type UPDATE, SA type AH.
Error Operation not supported on transport endpoint from PF_KEY.
Message length 16 bytes, seq=4294967294, pid=450."
Here is my mailId [email protected]
Thanks in Advance.
ssundar.

Problem seting up AX bridge

I've followed the instructions posted by Tesserax on how to setup a network extension with two AX. One is working fine as the main WDS device however the other which I set up as the bridge does not work properly. After I do all of the configuration steps and hit update it justs blinks amber. The funny thing is that in Airport Utility it shows up Green. I don't know if this matters but the AX setup a Main is 802.11n (g compatible) and the Bridge is 802.11g. The Main is hooked up via modem to a PPoE connection. I've made sure tha both devices are on the same channel and both have the same security passwords.
Some other details which might matter:
When I open up the Airport icon it shows both devices listed by their network names.
When I open up Airport Utility it only finds the Main device.
I can get the bridge to appear by selecting it under the Airport icon. Airport Utility asks each time o grant access for the device to the keychain.
Any thoughts would be helpfull.

In a WDS configuration, all base stations must use the same:
SSID (Network name)
Channel
Wireless encryption type/level/password

Oracle 10G installation problem, and errors on SOLARIS 10 x86

HI.
I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
Could anybody tell me how to solve these problems, please?
Thank you :)

Two options:
1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
2. Create database manually (without DBCA)

Problem occured with installation Solaris 10 on x86!

Hello all!
I am a newbie with Solaris, please help me to resolve this problem following:
I setup successfully Solaris 10 on my PC, during the processing, I did not choose value option for DHCP (Option No), then, the host name was unknown
I set the name for NFS as Ora9i. But when my Solaris operating system startup, it request login console. I tried to test with host name "unknown", password correctly, but I did not log in console or XWindows.
How do I do now?
Thank you!

(I am not sure that the install process has been the correct one)
anyway:
at the console login prompt you have to write the superuser name and its password... not the name of the host.
login: root
password: rootpassword
Regards

Problem with telnet on solaris 9

Hi all,
I have a problem with telnet on my sun fire v440 server with solaris 9 system, whenever I telnet to this server as a normal user ,after entering the username and password ,the user environment will switch to root. but i have checked the 'id' as i telnet the system ,it was not root. Pls refer the below message as i login the server:
SunOS 5.9
login: prad
Password:
Last login: Thu Apr 14 11:14:54 from 10.60.64.59
Sun Microsystems Inc.   SunOS 5.9       Generic May 2002
You have mail.
root@T-Server02 # id
uid=1017(prad) gid=10(staff)
root@T-Server02 # cat /etc/passwd | grep prad
prad:x:1017:10::/export/home/prad:/bin/sh
root@T-Server02 # ls -lrt profile*
-rwxrwxrwx   1 prad     other        174 Feb 7 2008 local.profile
-rw-r--r--   1 prad     other        144 Feb 7 2008 backupprofile
root@T-Server02 # pwd
*/export/home/prad*
root@T-Server02 #
Does any one have idea on how to solve this problem?

Thanks . I'm pretty new in SUN OS, and not quite get your point . Here is the local.profile showed as below:
This is a newly happened issue, I think we haven't change any profile setting in server:
SunOS 5.9
login: prad
Password:
Sun Microsystems Inc.   SunOS 5.9       Generic May 2002
You have mail.
root@T-Server02 # more local.profile
*# Copyright (c) 2001 by Sun Microsystems, Inc.*
*# All rights reserved.*
*# ident "@(#)local.profile 1.10 01/06/23 SMI"*
stty istrip
PATH=/usr/bin:/usr/ucb:/etc:.
export PATH
root@T-Server02 #

Problem with Java in solaris 10 zone

HI ,
i get this error message in my solaris 10 zone :
#./java version
Exception java.lang.OutOfMemoryError: requested -4 bytes for size_t in /BUILD_AREA/jdk1.5.0_11/hotspot/src/os/solaris/vm/os_solaris.cpp. Out of swap space?
in global zone , java works fine !
uname -a
SunOS Server 5.10 Generic_141414-07 sun4u sparc SUNW,SPARC-Enterprise
best regards

I see mention of a similar problem, but only with early development releases of solaris10 branded zones running on Solaris 11 development bits. It seems as though this is not what you are running.
Since there are no swap caps nor brand emulation in place, the next thing I would suspect would be that you somehow have inconsistencies between key libraries (e.g. libc) and the kernel. This could happen if you have a full-root zone that has been force attached (zoneadm -z <zone> attach -F). In the past, I've seen products that do this under the covers (e.g. Veritas Cluster) so it may have happened without your knowledge. If it is a sparse root zone, you may want to run "zoneadm -z <zone> detach; zoneadm -z <zone> attach -u". Prior to doing so, take whatever precautions you would normally take when patching a system.
If you open a support call about this I bet the first advice you are going to get is to patch, as you seem to be 2+ years behind. Also, newer releases of Java 5 are available at http://www.oracle.com/technetwork/java/javasebusiness/downloads/java-archive-downloads-javase5-419410.html.

Problem building BDBXML in Solaris 10

Hi,
I'm trying to build BDBXML in Solaris 10 to produce 64 bit libraries (Sun Fire T1000 server).
I use the build script as follows :
./buildall.sh -p solaris -b 64 -c cc -x CC -m /usr/sfw/bin/gmake with-dbxml-prefix=/usr/local/BerkeleyDBXML.2.2 with-berkeleydb-prefix=/usr/local/BerkeleyDB.4.3 with-pathan-prefix=/usr/local/pathan with-xerces-prefix=/usr/local/xerces with-xquery-prefix=/usr/local/xquery.1.2 enable-java
The build terminates with an error :
"/downloads/dbxml-2.2.13/pathan/include/pathan/internal/StringPool.hpp", line 75:Error: The function "memcpy" must have a prototype.
1 Error(s) detected.
Another problem I noticed is, though I specified -b 64 option in the build script, it produces 32 bit
BerkleyDB library. It produces xerces library as 64 bit.
Please help me.
-Anoop

Pertaining to my comment and the response from George Feinberg here:
http://cafe.elharo.com/xml/the-state-of-native-xml-databases/
After we received no response to this thread, I tried addressing the issue through our account rep, and we provided all the information requested (along with the fixes we could make):
"I'm working with our product engineers on this, and they have asked to find out the compiler being used, and flags being passed to the buildall.sh script, along with full output of the build (which will include the error messages)."
After that, nothing, despite repeated followup on my part including an offer of an admin login on our server, and repeated promises by Oracle to have a Sleepycat developer work with us directly on this issue. Responses from the (unpaid) eXist developers on their mailing list take hours, not months, by comparison. So you'll please excuse the opinions I formed as a result of this experience, my comment at cafe.elharo.com was not made lightly. We tried 2.3.10 and had the same problems btw.

Performance Problem Database Server on Solaris 10 5/08 (Update 5) v890 Box

Hello,
I am having performance problems on Solaris 10 5/08 (Update 5) Production server below I have mentioned the details information about the system and some command iostat and vmstat reports:
Sun Fire V890
Ram 32 GB
Physical CPU 8 (Logical 16)
Application Oracle 10G
Raid 1
1) iostat report
extended device statistics tty
device r/s w/s kr/s kw/s wait actv svc_t %w %b tin tout
md100 0.3 7.0 2.4 7.0 0.0 0.2 38.5 3 4 0 0
2/md3100 205.0 27.4 23099.6 472.2 0.0 2.5 10.9 0 79
2/md3200 225.3 27.3 24993.8 577.3 0.0 2.6 10.5 0 81
2/md3300 295.8 25.5 31538.0 412.5 0.0 3.1 9.8 0 84
2/md3400 198.3 25.6 21032.9 423.7 0.0 2.2 9.8 0 65
2/md3500 55.0 313.0 2397.5 2425.9 0.0 1.2 3.2 0 93
2/md3600 0.1 19.2 0.8 1440.0 0.0 0.1 5.4 0 10
2/md3700 3.1 0.8 48.8 35.7 0.0 0.0 9.3 0 4
2/md3800 300.4 0.7 30651.9 69.4 0.0 2.6 8.7 0 92
2/md3900 359.9 0.7 35876.8 56.6 0.0 3.3 9.1 0 95
2/md4100 0.6 512.1 9.6 1815.8 0.0 1.2 2.4 0 70
2/md4200 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0
2) vmstat report
kthr memory page disk faults cpu
r b w swap free re mf pi po fr de sr 2m 2m 2m 2m in sy cs us sy id
1 20 0 39126264 11482648 2570 5039 16336 14 14 0 1 41 38 47 61 71072 41785 30463 51 14 35
0 16 0 40580912 9157288 273 2366 0 8 7 0 0 198 310 251 192 49207 47702 29823 39 8 53
0 16 0 40588992 9163784 187 1392 0 8 8 0 0 251 278 212 163 47310 44840 27821 31 7 62
0 12 0 40597208 9171640 624 3168 0 2 2 0 0 298 329 209 245 49150 44768 26264 29 8 62
0 13 0 40577400 9158032 425 4452 0 9 8 0 0 177 181 331 292 49149 42545 25544 31 8 61
0 14 0 40576680 9156328 868 6027 0 8 7 0 0 161 234 259 327 48726 41187 26184 26 9 65
0 13 0 40567952 9151360 1067 7302 0 3 3 0 0 254 386 256 160 50388 45422 26596 31 10 60
0 13 0 40565160 9150880 838 6582 0 9 8 0 0 257 289 236 281 49697 45190 26925 31 10 60
0 12 0 40568616 9153128 640 4880 0 11 10 0 0 334 206 214 214 48738 43552 26431 27 9 65
0 12 0 40581696 9163248 799 5895 0 2 2 0 0 426 273 138 226 47831 41873 26301 30 9 61
0 11 0 40572096 9157896 1087 7138 1 10 9 0 0 337 163 220 305 53124 55371 27933 45 11 44
0 18 0 40520032 9123424 868 5946 0 10 9 0 0 222 218 170 249 51322 49556 27867 40 10 50
0 17 0 40528544 9130112 481 3257 0 1 1 0 0 276 269 145 316 56103 44359 27645 39 9 51
0 15 0 40521776 9126208 490 3174 0 10 8 0 0 240 305 226 222 55839 43464 27003 42 10 48
0 15 0 40491176 9101072 769 4149 0 8 8 0 0 297 362 150 317 59718 55624 34333 43 11 46
0 17 0 40603696 9183224 785 4364 0 2 2 0 0 314 234 281 238 62990 67554 39122 43 12 45
0 19 0 40622592 9215816 711 5308 1 12 12 0 0 390 167 252 283 65340 60514 30525 45 12 44
0 17 0 40662248 9276136 767 5113 0 10 8 0 0 218 280 298 221 63734 53314 31029 43 11 45
3) SAR CPU Utilization report
12:30:51 %usr %sys %wio %idle
12:31:01 41 9 0 50
12:31:11 43 11 0 46
12:31:21 42 11 0 47
12:31:31 44 12 0 44
12:31:41 42 11 0 47
Average 42 11 0 47
Anybody have any comment regarding the reports ?
Thanks for your help,
Srikanta Sanpui

A suggestion: if you use the code tags with your output it will be a great deal easier to read.
extended device statistics tty
device r/s w/s kr/s kw/s wait actv svc_t %w %b tin tout
md100 0.3 7.0 2.4 7.0 0.0 0.2 38.5 3 4 0 0
2/md3100 205.0 27.4 23099.6 472.2 0.0 2.5 10.9 0 79
2/md3200 225.3 27.3 24993.8 577.3 0.0 2.6 10.5 0 81
2/md3300 295.8 25.5 31538.0 412.5 0.0 3.1 9.8 0 84
2/md3400 198.3 25.6 21032.9 423.7 0.0 2.2 9.8 0 65
2/md3500 55.0 313.0 2397.5 2425.9 0.0 1.2 3.2 0 93
2/md3600 0.1 19.2 0.8 1440.0 0.0 0.1 5.4 0 10
2/md3700 3.1 0.8 48.8 35.7 0.0 0.0 9.3 0 4
2/md3800 300.4 0.7 30651.9 69.4 0.0 2.6 8.7 0 92
2/md3900 359.9 0.7 35876.8 56.6 0.0 3.3 9.1 0 95
2/md4100 0.6 512.1 9.6 1815.8 0.0 1.2 2.4 0 70
2/md4200 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0 0

A problem logging in in Solaris Express Developer Edition 05/07

Hi all.
I just upgraded Solaris 10 11/06 to Solaris Express Developer Edition 05/07 on a Sun Ultra 20 M2 and a strange problem arose: after root has logged in in a Gnome session, then when another user tries to log in in Gnome everything slows down: the login screen with "Window manager" takes some 20 secs to go away and then "Panel" sticks there... The only option is killing X with ctrl+alt+backspce. This only happens if root logs in with Gnome, and not in CDE. If root doesn't log in, nothing strange happens ever.
The problem seems unrelated with the user that logs in:
- existing users which could login in Solaris 10 11/06 now have this problem
- new users have this problem too...
Rebooting the machine and never logging in to Gnome with root "solves" the problem.
Has anyone ever had this problem?
Can be a problem relating to upgrading?
Thanks,
Enrico.

You should probably direct SXDE queries to the forums at http://opensolaris.org, more chance of a response from the JDS developers there.
Message was edited by:
calum

WLS 7.0 Active Directory authenticator - problems starting managed server (Solaris 8)

Has anyone managed to setup a WLS 7.0 Active Directory authenticator and booted
a managed server using the node manager? I can boot the server without the AD
authenticator and I can also boot the server using a script and successfully authenticate
through AD. My AD control flag is set to OPTIONAL and I have also setup a default
authenticator to boot weblogic - the control flag here is set to SUFFICIENT. This
configuration works fine with weblogic running on W2K, but not on Solaris (it
looks like the control flag is being ignored). Errors as follows
####<Oct 1, 2002 1:59:08 PM BST> <Info> <Logging> <mymachine> <server01> <main>
<kernel identity> <> <000000> <FileLo
gger Opened at /opt/app/live/appserver/domains/test/NodeManager/server01/server01.log>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01> <main>
<kernel identity> <> <000415> <System
has file descriptor limits of - soft: 1,024, hard: 1,024>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01> <main>
<kernel identity> <> <000416> <Using e
ffective file descriptor limit of: 1,024 open sockets/files.>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01> <main>
<kernel identity> <> <000418> <Allocat
ing: 3 POSIX reader threads>
####<Oct 1, 2002 1:59:19 PM BST> <Critical> <WebLogicServer> <mymachine> <server01>
<main> <kernel identity> <> <0003
64> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException:
Problem instantiating
Authentication Providerjavax.management.RuntimeOperationsException: RuntimeException
thrown by the getAttribute method of the Dynam
icMBean for the attribute Credential>
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
####<Oct 1, 2002 1:59:19 PM BST> <Emergency> <WebLogicServer> <mymachine> <server01>
<main> <kernel identity> <> <000
342> <Unable to initialize the server: Fatal initialization exception
Throwable: weblogic.security.service.SecurityServiceRuntimeException: Problem
instantiating Authentication Providerjavax.management.
RuntimeOperationsException: RuntimeException thrown by the getAttribute method
of the DynamicMBean for the attribute Credential
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)

Solved the problem. The 'domain root' directory specified in the remote start configuration,
must contain a copy of the file 'SerializedSystemIni.dat' that was created along
with the domain, in order to boot when an AD authenticator is configured. If an
AD authenticator is not configured, no file is required. This was not a platform
specific issue; on Win2K I had configured the 'domain root' remote start parameter
to point to an existing domain root and not a new directory.
"Andrew Walker" <[email protected]> wrote:
>
Has anyone managed to setup a WLS 7.0 Active Directory authenticator
and booted
a managed server using the node manager? I can boot the server without
the AD
authenticator and I can also boot the server using a script and successfully
authenticate
through AD. My AD control flag is set to OPTIONAL and I have also setup
a default
authenticator to boot weblogic - the control flag here is set to SUFFICIENT.
This
configuration works fine with weblogic running on W2K, but not on Solaris
(it
looks like the control flag is being ignored). Errors as follows
####<Oct 1, 2002 1:59:08 PM BST> <Info> <Logging> <mymachine> <server01>
<main>
<kernel identity> <> <000000> <FileLo
gger Opened at /opt/app/live/appserver/domains/test/NodeManager/server01/server01.log>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01>
<main>
<kernel identity> <> <000415> <System
has file descriptor limits of - soft: 1,024, hard: 1,024>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01>
<main>
<kernel identity> <> <000416> <Using e
ffective file descriptor limit of: 1,024 open sockets/files.>
####<Oct 1, 2002 1:59:09 PM BST> <Info> <socket> <mymachine> <server01>
<main>
<kernel identity> <> <000418> <Allocat
ing: 3 POSIX reader threads>
####<Oct 1, 2002 1:59:19 PM BST> <Critical> <WebLogicServer> <mymachine>
<server01>
<main> <kernel identity> <> <0003
64> <Server failed during initialization. Exception:weblogic.security.service.SecurityServiceRuntimeException:
Problem instantiating
Authentication Providerjavax.management.RuntimeOperationsException:
RuntimeException
thrown by the getAttribute method of the Dynam
icMBean for the attribute Credential>
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of
the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)
####<Oct 1, 2002 1:59:19 PM BST> <Emergency> <WebLogicServer> <mymachine>
<server01>
<main> <kernel identity> <> <000
342> <Unable to initialize the server: Fatal initialization exception
Throwable: weblogic.security.service.SecurityServiceRuntimeException:
Problem
instantiating Authentication Providerjavax.management.
RuntimeOperationsException: RuntimeException thrown by the getAttribute
method
of the DynamicMBean for the attribute Credential
weblogic.security.service.SecurityServiceRuntimeException: Problem instantiating
Authentication Providerjavax.management.RuntimeOper
ationsException: RuntimeException thrown by the getAttribute method of
the DynamicMBean
for the attribute Credential
at weblogic.security.service.PrincipalAuthenticator.initialize(PrincipalAuthenticator.java:186)
at weblogic.security.service.PrincipalAuthenticator.<init>(PrincipalAuthenticator.java:236)
at weblogic.security.service.SecurityServiceManager.doATN(SecurityServiceManager.java:1506)
at weblogic.security.service.SecurityServiceManager.initializeRealm(SecurityServiceManager.java:1308)
at weblogic.security.service.SecurityServiceManager.loadRealm(SecurityServiceManager.java:1247)
at weblogic.security.service.SecurityServiceManager.initializeRealms(SecurityServiceManager.java:1364)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:1107)
at weblogic.t3.srvr.T3Srvr.initialize1(T3Srvr.java:703)
at weblogic.t3.srvr.T3Srvr.initialize(T3Srvr.java:588)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:276)
at weblogic.Server.main(Server.java:31)

Problems with rsh in solaris 8

I have tried to execute a command with "rsh", like a "prstat", and it works but if I execute a "snoop" command, I see that the machine that runs the command(rsh) lost information. There is packets from TCP that has been return (in some occasions partially), this provokes the application losts information.
Which can the problem be ?

OK, but the problem is not in C++. Your C++ code just invokes invokes the shell and remote operations, and returns the result. The local C++ program cannot cause or repair communication problems between machines.

Multi-Owner Diskset problem with SC3.1U4 & Solaris 10

Hi All,
My Problem is after configured the mulit-owner diskset of SVM. If either one node has been restarted/rebooted. The rebooted node can't join back to the diskset like below status. I have tried to use some metaset commands to put the rebooted node to join backed the diskset but failed.
After both nodes rebooted. Then I run "metaset" command on both nodes, the status seems can't synchronize. "See below status for detail"
root@IMDUFSDBM01 # metaset -s racset
Multi-owner Set name = racset, Set number = 1, Master = IMDUFSDBM01
Host Owner Member
IMDUFSDBM01 Yes
IMDUFSDBM02 No
Driv Dbase
d6 Yes
root@IMDUFSDBM02 # metaset -s racset
Multi-owner Set name = racset, Set number = 1, Master =
Master and owner information unavailable until joined (metaset -j)
Host Owner Member
IMDUFSDBM01 multi-owner Yes
IMDUFSDBM02 No
Driv Dbase
d6 Yes
-------------------------------------------------------------------------Failed to use commands to put the IMDFUSDBM02 to diskset "racset".
root@IMDUFSDBM01 # metaset -s racset
Multi-owner Set name = racset, Set number = 1, Master = IMDUFSDBM01
Host Owner Member
IMDUFSDBM01 multi-owner Yes
Driv Dbase
d6 Yes root@IMDUFSDBM01 # metaset -s racset -d -h IMDUFSDBM02
metaset: IMDUFSDBM01: racset: host IMDUFSDBM02 does not have set
root@IMDUFSDBM01 # metaset -s racset -M -a -h IMDUFSDBM02
metaset: IMDUFSDBM01: racset: host IMDUFSDBM02 is already in the set
Dear all, any idea or experience on this problem?
Chowsingsing from Hong Kong

Hi Tim/All,
I have party fixed the multi-owner diskset problem after create the resource for SUNW.rac_framework, SUNW.rac_udlm & SUNW.rac_svm. But the new problem is generated. The new problem is if two nodes are up, then the multi-owner diskset can be access via two nodes. But if either one node is down, the remain node can�t access the diskset (but the scstat status is fine). For example: node2 is down, node1 is up. Then multi-owner diskset membership of node1 is lost. If node1 is down, node2 is up. Then multi-owner diskset membership of node2 is lost. After both nodes become online, the diskset will resume to normal and can be access.
normal status of scstat and metaset
-- Cluster Nodes --
Node name Status
Cluster node: node2 Online
Cluster node: node1 Online
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: node2:qfe1 node1:qfe1 Path online
Transport path: node2:qfe0 node1:qfe0 Path online
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 3
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: node2 1 1 Online
Node votes: node1 1 1 Online
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d2s2 1 1 Online
-- Device Group Servers --
Device Group Primary Secondary
-- Device Group Status --
Device Group Status
-- Multi-owner Device Groups --
Device Group Online Status
Multi-owner device group: racset node1,node2
-- Resource Groups and Resources --
Group Name Resources
Resources: rac-rg rac-framework-rs rac-udlm-rs rac-svm-rs
-- Resource Groups --
Group Name Node Name State
Group: rac-rg node1 Online
Group: rac-rg node2 Online
-- Resources --
Resource Name Node Name State Status Message
Resource: rac-framework-rs node1 Online Online
Resource: rac-framework-rs node2 Online Online
Resource: rac-udlm-rs node1 Online Online
Resource: rac-udlm-rs node2 Online Online
Resource: rac-svm-rs node1 Online Online
Resource: rac-svm-rs node2 Online Online
-- IPMP Groups --
Node Name Group Status Adapter Status
IPMP Group: node2 sc_ipmp0 Online hme1 Online
IPMP Group: node2 sc_ipmp0 Online hme0 Online
IPMP Group: node1 sc_ipmp0 Online hme1 Online
IPMP Group: node1 sc_ipmp0 Online hme0 Online
Multi-owner Set name = racset, Set number = 1, Master = node1
Host Owner Member
node1 multi-owner Yes
node2 multi-owner Yes
Mediator Host(s) Aliases
node1
node2
Driv Dbase
d2 Yes
After shutdown node1, node2 remain running
-- Cluster Nodes --
Node name Status
Cluster node: node2 Online
Cluster node: node1 Offline
-- Cluster Transport Paths --
Endpoint Endpoint Status
Transport path: node2:qfe1 node1:qfe1 faulted
Transport path: node2:qfe0 node1:qfe0 faulted
-- Quorum Summary --
Quorum votes possible: 3
Quorum votes needed: 2
Quorum votes present: 2
-- Quorum Votes by Node --
Node Name Present Possible Status
Node votes: node2 1 1 Online
Node votes: node1 0 1 Offline
-- Quorum Votes by Device --
Device Name Present Possible Status
Device votes: /dev/did/rdsk/d2s2 1 1 Online
-- Device Group Servers --
Device Group Primary Secondary
-- Device Group Status --
Device Group Status
-- Multi-owner Device Groups --
Device Group Online Status
Multi-owner device group: racset node2
-- Resource Groups and Resources --
Group Name Resources
Resources: rac-rg rac-framework-rs rac-udlm-rs rac-svm-rs
-- Resource Groups --
Group Name Node Name State
Group: rac-rg node1 Offline
Group: rac-rg node2 Online
-- Resources --
Resource Name Node Name State Status Message
Resource: rac-framework-rs node1 Offline Offline
Resource: rac-framework-rs node2 Online Online
Resource: rac-udlm-rs node1 Offline Offline
Resource: rac-udlm-rs node2 Online Online
Resource: rac-svm-rs node1 Offline Offline
Resource: rac-svm-rs node2 Online Online
-- IPMP Groups --
Node Name Group Status Adapter Status
IPMP Group: node2 sc_ipmp0 Online hme1 Online
IPMP Group: node2 sc_ipmp0 Online hme0 Online
Multi-owner Set name = racset, Set number = 1, Master = node1
Host Owner Member
node1 multi-owner Yes
node2 No
Mediator Host(s) Aliases
node1
node2
Driv Dbase
d2 Yes
Anyone can help!!
Chowsingsing from HK

Problem Oracle10G Installation in Solaris-x86

Hai,
I am facing problem when installing Oracle10g on solaris machine.
I created user and group for oracle and also changed some kernel properties.after changing all requirements i am trying to run runInstaller...but it gave exception like this ...
Exception:
Starting Oracle Universal Installation...
Checking Installation requirements...
Checking Operating System version :
must be 5.6,5.7,5.8,5.9 Actual 5.10
failed <<<<
exsting oracle universal installer.log for this session can be found at /tmp/orainstaller/datetime....
I am using ---
Oracle version : Oracle Database 10g Release 1(10.1.0.3) for Solaris x86
Solaris Version : Solaris 5.10
can any one help me out from this problem....
Thanks in advance ....
-Lakesh

Oracle 10G release 1 only support up to Solaris 9.
You probably need to install 10G release 2. The second release of major Oracle version is always more stable anyway.
http://download-west.oracle.com/docs/cd/B19306_01/install.102/b15697/pre_install.htm#sthref110

Patch problem in SUNWappserver under Solaris 10

When attempting to install the patch 119166-15 for AppServer 8.1, I get the following info and error:
<--- Begin Session text --->
# patchadd -G 119166-15.jar
Validating patches...
Loading patches installed on the system...
Done!
Loading patches requested to install.
Done!
The following requested patches have packages not installed on the system
Package SUNWaslb from directory SUNWaslb in patch 119166-15 is not installed on the system.
Checking patches that you specified for installation.
Done!
Approved patches will be installed in this order:
119166-15
Verifying signed patch <119166-15>...
Verifying digital signature for signer <es-signature>
ERROR: Signature verification failed while verifying certificate <subject=Sun Microsystems Inc Root CA, issuer=GTE CyberTrust Root>:<unable to get local issuer certificate>.
ERROR: Unable to verify signature for signer <es-signature>
Signature invalid on signed patch <119166-15>.
Patchadd is terminating.
<---End Session test --->
Also having problems running "asadmin" ; I cannot determine which port the Admin Server is running on or needs to be running on. Fairly new to SUN OS, so any "dummy" pointers would probably help...
Regatds...
Texas Mike....

You might want to ask about patching issue on Solaris update forums since as far as I can tell issue is not related to the fact that patch is for Application Server - it seems to be generic problem with patch signature verification. Solaris update and patching forum URL:
http://forum.sun.com/jive/forum.jspa?forumID=316
As for the asadmin question: first you need to start your server using 'asadmin start-domain' command and you do not need to know the port number to do that. After that you can try accessing https://localhost:4849 (4849 is the default value for admin application URL port number).

A.M.P.S. - problems seting up on solaris 10

Similar Messages

Maybe you are looking for