A mac equivalent  to serif web plus 10 please help !

I formaly used serif web plus10 to design maintain and and upload my 3 web sites
which had many attributes including shop building,html,ect
all in one
i think iweb is too basic for my need has any one got any suggestions as to a a simalar sofware i can use as serif is for pc only
or even tips
thanks debs x

In case someone wonders: http://www.serif.com/webplus/webplus10/
For Mac software, go here: http://www.pure-mac.com/webed.html

Similar Messages

  • Trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ?  Thank you

    trying to veiw videos from a website that requires me to download firefox and silverlight.My imac osx 10.5.8 will now download firefox. firfx tells me my mac is not compatible with ffox Please help me ?  Thank you

    There is a version of Firefox 4 available for PPC Macs:
    TenFourFox 4.0.1 Firefox 4 For PowerPC Browser Released
    Version 4.0.1 of TenFour Fox, FloodGap's port of Firefox 4 for Power PC
    Macs that supports both Mac oS X 10.4 and 10.5. has been released.
    Mozilla.org dropped support for OS 10.5 after Firefox 3.6 and for Power
    PC with the fourth beta of Firefox 4.
    TenFourFox uses almost all the same code as Firefox 4 and has nearly all
    the same features, including faster JavaScript, WebM video, and HTML 5
    and CSS 3 support, as well as new and emerging Web features, but with
    the code needed to keep your Power Mac functional and fast. Out of beta
    and it's ready for action, versiob 4.0.1 is a performance, security and
    stability update incorporating Mozilla's Firefox 4.0.1 plus AltiVec acceler
    -ation for WebM and browser graphics, and G5 JavaScript acceleration.
    For more information, visit:
    http://www.floodgap.com/software/tenfourfox/
    Source: from http://www.applelinks.com - posted April 25, 2011)
    Now for the intersting bit: TenFourFox, like Firefox, does not support most plug-ins. Unless you are prone to headaches (in which case don't) you can read about that here:
    http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
    But there is a workaround!
    Open TenFourFox and type in the address bar: about:config (no spaces) and click return. This gives you a warning that it might harm the application. Ignore that and click on 'I'll be careful, I promise' and you get the config file that you can edit - with great care.
    Look/search (scroll down) for: tenfourfox.plugins.enabled
    Set it to true. (Double click it to toggle it)
    Now close TenFourFox, open it again, and Flash will now work, as it now uses the plug-ins that Safari has stored.
    With SilverLight, Microsoft attempted to create their own version of what a replacement for Flash could be - but not to universal acclaim. You can read more about it here:
    http://silverlight.net/
    So, if you go to any sites that have been designed for this new Silverlight stuff, you can download the plug-in from here (but make certain that you are downloading SilverLight v.1.0 for OS X (10.4.8 upwards) if you are using a PPC Mac, but even this will not work with Safari 4. Version 2 only works with Intel Macs and does work with Safari 4/5. The solution is to download and install the latest version of Flip4Mac, which now includes a Silverlight component:
    http://dynamic.telestream.net/downloads/download-flip4macwmv.htm
    But the latest news is that Microsoft will probably abandon Silverlight in favour of HTML5:
    http://www.appleinsider.com/articles/10/10/29/apples_ios_pushes_microsoft_to_dia l_down_silverlight_for_html5.html  and
    http://www.bbc.co.uk/news/technology-11673384

  • Well, i was on my laptop now and all of a sudden a pop up message appeared and said "your download is complete" so i went to go check it out and it was 'MacProtector'. i cant delete it and it keeps opening unwanted web pages, please help me sort this out?

    Well, i was on my laptop now and all of a sudden a pop up message appeared and said "your download is complete" so i went to go check it out and it was 'MacProtector'. i cant delete it and it keeps opening unwanted web pages, please help me sort this out someone?

    Refer to:  http://cantalktech.com/2011/05/08/mac-protector/.

  • Hi! I want to transfer my old mails from mac book pro to iPad 2, Please help me on this.

    Hi! I want to transfer my old mails from mac book pro to iPad 2, Please help me on this.

    Did you select the Pages app to sync to the iPad? Do you know how to do that or do you auto sync and rely on that only?

  • I have a macbook circa 2007 and am trying to update my software and it says its up to date but it only has mac os x 10.5.8. please help?

    i have a macbook circa 2007 and am trying to update my software and it says its up to date but it only has mac os x 10.5.8. please help?

    The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
    It is Not available as a download... It is a Paid Upgrade.
    Do this first...
    Check that your Mac meets the System Requirements for Snow Leopard...
    Snow Leopard Tech Specs
    http://support.apple.com/kb/SP575
    If so Contact Apple in your Country to Purchase a Snow Leopard Disc...
    http://support.apple.com/kb/HE57
    In the US...
    1-800-MY-APPLE or 1-800-676-2775
    After the Successful Install, run Software Update to get the latest updates for Snow Leopard.
    Be sure to make a Backup of your Current System Before Upgrading...

  • HT1338 i lost my dvd and i want to install mac os on my macbook pro please help

    i lost my dvd and one of my friends install a strange os can't update or install some apps please i want to install my mac os on my macbook pro please help ?

    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html

  • Unable to find bootcamp in control panel after upgrade to Mac OS X 10.6.8, please help.

    Unable to find bootcamp after upgrade tp Mac OS X 10.6.8, please help.

    you problem is in OS X (guessing here)
    Guess #2: you use an NTFS driver in Mac OS X
    Try OS X forum? No?
    When you do reboot into Windows - use Option key for one - and go to Windows Control Panel: Boot Camp: the Startup Disk section to change the default OS is there and works.
    It isn't "boot camp" it is Windows. Boot Camp are drivers, control panel, program to partition. What you wanted to see was "Windows" OS to change the default.
    Do you 'see' Windows volume on the Desktop as being physically there?
    Opened Disk Utility and look at the drives and volumes: Windows volumne is still present.

  • I'm trying  to download AE 12 trial but can't after a few hours, the download assistant keeps bringing up error 103 I have a Mac OS X 10.9.3, please help, thanks

    I'm trying  to download AE 12 trial but can't after a few hours, the download assistant keeps bringing up error 103 I have a Mac OS X 10.9.3, please help, thanks

    Cred2029 are you utilizing the process listed in Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html to install the After Effects trial?

  • My mac camera does not work ! please help i need my camera for an interview !

    my mac camera does not work ! please help i need my camera for an interview !

    CLICKY CLICK---> http://support.apple.com/kb/HT2090 How to Troubleshoot iSight

  • I deleted my extensions manager and now my Mac won't start up. Please Help!!

    I have an IMac, 24" model, running OS X. For the past several days, little warning windows have been popping up with this annoying beep, telling me that my computer was infected with various viruses. 4, to be exact. Also, while on the internet, random pop-up windows have appeared, so I thought I did have a virus. So, to correct the matter (or attempt to), I deleted my preferences folder from the system folder, as well as the extensions manager.
    Now, the computer won't start up past the white logo screen with the turning gear thingy. I've tried resetting the PRAM, and starting in safe mode, and safe mode with the progress screen, and even something there while holding the option key (that one gave me an icon of my HD, but clicking on it took me back to an endless wait on the white screen). I've tried starting from the disk that came with the computer (I held the C key) but not only doesn't the computer start from the disk, it spits the disk out. I don't understand. The computer was fine until I deleted the ext. mgr and preferences, so it can't be that the computer went bad or something.
    I don't know what else to do here. I do have an extended service warranty with Best Buy, but I wanted to see if there was some way to fix this before hauling this thing off to the store. Any suggestions? I'm desperate here, because anything and everything I've tried (based on all the try-this and try-thats I found on the internet), nothing has worked.
    Please help.
    Thanks in advance.

    Well done! You've succeeded in turning your Mac into a useless brick.
    Deleting the System/Library/extensions folder and the associated manager removed most of the functionality from your OS.
    And all to get rid of what sounds like the MacDefender trojan or a variant.
    ref; http://support.apple.com/kb/HT4650 and http://support.apple.com/kb/HT4651
    You may have a slim chance of recovering if it will still boot in Target Disc Mode; in which case you can use another Mac to install the system remotely.
    And I doubt your warranty with Best Buy is going to cover user "error."
    Message was edited by: noondaywitch

  • Unable to Load Mac OSX after update - Urgent! Please Help

    I just updated my Mac using System update, which required a start.
    I restarted the computer, but it's stuck in the gray apple screen with the circular running bars. It's been now 10 minutes, and it never took so much. I tried to turn it off, then on again, same problem. What should I do? Please, help!
    Thanks,
    richard

    Problem solved.
    First of all, thank you all for the advices and links, now I learned something. After panicking, I tried the PRAM reset restart and the "shift" restart and it didn't work. I didn't have the installation disk with me, so I went straight to Tekserve to hear them. They told me that my system got corrupted for some reason and I had two options with them:
    - a quick fix, for US$59, which would erase all my HD content and take 24 hours
    - a fix without erasing the HD, for US$195, which would take 4 business days!
    They said those were all the options. For me the money was not major problem. The big issue for me would be not having my computer for many days.
    Then I thought: what if I try to reinstall the system myself? And they said: well, you can try that.
    That's what I did as I got home. Install disk, restart holding down the "C" key.
    One hour later, everything was back to normal.
    Now the question: why at tekserve they didn't say anything to me about reinstalling the system myself?
    Anyway, this was the first major problem I bumped into since I have turned to apple 3 years ago.
    And again, thanks everybody for the help!

  • CS6 won't work in Mac OS 10.6.8. Please help

    After successful installation on iMac with OS 10.6.8, none of the CS components (Photoshop, Illustrator, etc) will open (message "not supported on this Mac"). This is contrary to the stated CS6 system requirements at www.adobe.com and is exceedingly frustrating. Please help.

    Hi there,
         Mac 10.6.8 is compatible to install CS6. But please check the processor and other system requirements which you are using. You require Multi-processor to activate CS6. You can check the system requirements under "Apple icon > About this Mac".
    Regards,
    Jairaj

  • Which mac should i purchase...please help!!!!! Its my first mac!

    Im in a dilema...I solely want to produce music with Ableton and I will be using Final Cut Pro extensively...im debating on which MAC system to purchase....Im highly interested in the new macbook but im not sure if the laptop will sustain the tasks I want to do...maybe a macbook pro or powerbook? or should i just skip the laptop idea and get an imac or desktop mac! Please help?

    any mac would work fine using ableton live, but if you're going to be doing final cut work, you're going to need more graphics power. if you need a portable, the macbook pro should do you fine. a powerbook will work, but with final cut the macbook pro is literally at least 4 or 5 times as fast. if you don't need a portable, either the 20" or 24" imac will work fine, the smaller one doesn't have dedicated graphics, so it won't do. if you are working with serious, professional media or HD media in final cut, the mac pro is the only way to go.

  • Trouble Loading a flat file into BPS using a Web Browser, Please help ?

    Hi Gurus,
    I'm in BW 3.5.
    I did everything and also followed the How to .. paper to upload a flat file into BPS tran cube via a Web browser.
    I created a Web Browser and generated a BSP application. When I run the BSP application I get the following error:
    "The generated data is not contained in the selection condition" UPC204
    The error message also says:
    "The error message can appear when you use a planning function to generate data that is outside the data range specified by the selection conditions of the planning package"
    When I save the variables that I select in the web interface they are getting saved in a table(UPC_VAR_CHA_ACT), but somehow the BSP application cannot look into those values, which I think is the cause of above issue.
    Please help.
    Venkat

    Hi,
    This type of error is quite common in BPS operations. This generally happens due to some missing values in the restriction of the planning levels and the packages.
    The error message is "The generated data is not contained in the selection condition" UPC204
    Check in the planning level and the package, all the restrictions that have been defined and verify whether the values which are getting uploaded through the flat file are present in the election condition of the level or in the package.
    Please award points if helpful.

  • I can't open any Danish web sites - PLEASE HELP !!

    It's very weird, since yesterday haven't been able to open any Danish web sites.
    As soon as it ends with .dk it won't open the page. And seeing that my web site ends with .dk I can't get my personal e-mail to my mail program either.
    This is not only Firefox. It's all my browsers.
    I'm on an iBook G3.
    I cleared cashes - cookies etc. Nothing's working. And I've been able to open all the websites from other computers, so the problem must be coming from mine.
    PLEASE HELP !!

    I'm definately no network specialist, just heared an emergency call ..
    my guess, try...:
    system prefs/network...
    select your network settings, click on "TCP/IP" ...
    paste into DNS Server (any or all...)
    213.191.74.19
    213.191.92.87
    131.234.39.10
    131.234.39.11
    131.234.137.23
    131.234.137.24
    195.8.224.1
    195.8.224.1
    these are some German DNS servers, which allow (me...) to access any, even Danish websites ...
    I'm pretty sure, there're lots of Danish DNS Server, which works faster/more reliable, but just give it a try, how it works...........
    unfortunately, I don't have the IPs of any danish DNS... as said, me no specialist, I just know, "these works"

Maybe you are looking for

  • Acrobat 7 as commandline-tool

    Hello, is it possible, convert office-documents to PDF automated e.g. by execute acrobat professional as an command line-version? Thanks for answers Uwe

  • [Solved] Gnome 3.6. - no application menu after update

    After the Gnome-Shell-Update there are no applications anymore in the Gnome desktop. I have to start programmes with 'Alt + F2' and it's not possible to pin them in the Dash. They don't appear in the Gnome's desktop search either. If I'm starting ala

  • Can't find "open with Rosetta"

    So, I followed the Help directions - I closed Safari, ctrl-clicked it in the applications file, and chose Get Info. But in the General section, there is no "open with Rosetta" option. What do I do?

  • Intermitant Hard Drive Failure?

    First off let me give you some background on my iBook. It is about 1.5 years old, and is out of warrenty. I have had three hard drive replacements and one logic board replacement (all paid for in full by Apple, I might add). The problem I am having i

  • Does Photoshop CS6 autosharpen resized images?

    Hi all, I've been using Photoshop for my Photography for quite a long time and I have recently upgraded to Photoshop CS6. Whenever I resize my images in CS6, I get the feel (from looking at the images) that the application has autosharpened my images