A message at beginning of start up that says my hard drive has an error and could fail soon.
At startup error message says error with hard drive could fail anytime please contact www.hp.com/go/techcenter/startup. How do I correct this? HP Pavilion Entertainment PC. Windows 7.
Hi:
Please reboot your PC and at the beginning of the HP welcome screen, tap the F10 key to gain access to the BIOS.
There should be a diagnostics menu in there. Select that menu and then there should be a hard drive diagnostics option.
Run that, and see what it reports.
If it still reports errors or imminent failure, back up your files and you will need to purchase a new hard drive or contact HP for a hard drive replacement if your PC is still under warranty.
If you have not made recovery DVD's using the HP Recovery Manager, do so now. You will need recovery DVD's to reinstall the operating system and software that originally came with your PC>
Paul
Similar Messages
-
When I try to install ios lion the installer says my hard drive has SMART errors and that I need to buy a new Hard Drive, but my computer witch has snowleprd and runs just fine.
SMART is a technology that monitors the drive for signs of impending failure. You can verify that SMART is indicating a problem in Disk Utility. Select the hard drive and look at the bottom of the window. It should look like this:
If the SMART status is not "Verified" then you should back up your drive and start shopping for a new one. -
In disk utility, it shows that my external hard drive is somehow unmounted and I can't access it in finder or repair it in Disk Utility. How can I get this working without losing my important data?
Thank you!When you erased the disk did you select Mac OS Extended Journaled as the format option?
-
I get an error that says my hard drive is likely to fail
HP Pavillion g6-1a30us notebook pc
windows 7
error messages states that the hard drive is likely to failHi,
Is it still under warranty ? If YES call HP for help, here is the list
http://www8.hp.com/us/en/hp-information/summary/ww-contact-us.html
If NO, backup your data and prepare for a replacement.
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Getting a message saying my hard drive has bad health.
Hello!
Theres a problem with my computer. Ive recently got a program to tell my Hard Drive's health. when I opened it it sayed this:
The Program is: Hard Disk Sentinel
Its saying my computer's hard drive has 53 Days to live?
And the health is bad? By the way I have a Compaq Presario CQ57 Notebook PC.
I take good care of my computer and most of the time it stays at my desk.
Is this true? Is this fake? Will I have to replace it?
Thanks,
SeanWhen requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
There is no way to know exactly when a hard drive may fail. The software most likely relies on S.M.A.R.T. data to try to predict when a failure may occur. Using the hard drive diagnostics provided by HP at boot up or drive diagnostics from the hard drive manufacturer should indicate the status of the hard drive.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240 -
Erasing all music from iTunes and starting over from an external hard drive
Hello,
I tried moving all my media to an external hard drive to make room on my MacBook Pro and just be able to run the media (ie music movies etc) from the external hard drive when it was connected.
Well this backfired big time probably because I did not follow any sort of instructions.
1st I backed up Finder > music > iTunes > iTunesMedia folder to two seperate external hard drives just in case.
2nd I think (this was back in March 2013) I decided to cut/delete the folder Automatically Add to iTunes and moved it to one of my external hard drives (this folder for some reason contained mostly everythiing that was in the iTunes Media folder).
3rd I finally decided to erase content from iTunes Media Folder
4th I deleted the iTunes Media folder because I felt it was stupid to have a "iTunes Media folder" and "iTunes Music Folder" in the same place but not actually have anything in the iTunes Music folder (probably really stupid of me in retrospect)
5th I unchecked the box under iTunes > Preferences > Advanced "Copy files to iTunes Media folder when adding to library"
6th I believe I changed the location of "iTunes Media folder location" in the Advanced area under Preferences thinking this should be pointing to my external drive
I then believe I tried to run iTunes and play my content, but when I did all it did was copy my music/media back to my MacBook Pro hard drive but I did not realize it was doing this until later the next day when I tried to play some music and realized I had 3 copies of everything in my iTunes program (ie music movies podcasts tv shows etc) however, I could play all three versions of whatever it was I selected there was no "error message" saying that iTunes could not located that file, would you like to try and locate.
So I checked Finder to see if there were 3 copies of everything (by the way at this point I stopped connecting my external hard drive for the sake of making more copies on iTunes) but there wasn't??? So I tried to go through Option+View > Show Exact Duplicate Copies and delete all but one of the items. When I would delete them and it asked if I wanted to move them to my Trash Bin I clicked yes and all the 2nd and 3rd copies were gone!!! Yeah, so when I played those songs/movies that remained they would play!!!!!
Than I realized that my Internal Hard Drive was almost full and went looking around for things I could delete to help make my MacBook run better, and realized that my Trash had a large amount of data in it and that emptying it would significantly reduce space on my Internal Hard Drive, but when I went back to iTunes and selected music or movies to play it placed the infamous "!" next to that track or movie and it could not locate those items anymore?
Long long long story short hopefully, can anyone help me set up iTunes so that it only can play content/media off of my external drive and not take up space on my internal hard drive? Is this even possible to do that or will always start to copy those files from the external hard drive back onto the internal hard drive? and second is there anyway to use the Apple router external hard drive to use as the source for all my media?
PS I am running Mac OS X Lion version 10.7.5 and iTunes 11.1.3 (8) 64-bit2012EVOL wrote:
Hello,
I tried moving all my media to an external hard drive to make room on my MacBook Pro and just be able to run the media (ie music movies etc) from the external hard drive when it was connected.
Quit iTunes.
Copy the entire /Music/iTunes/ folder to the external. Don't only copy the iTunes media folder.
Hold Option, launch iTunes, select Choose library... and select the iTunes folder on the external.
This is all you need to do.
Everything for iTunes (except the application) is on the external.
2nd I think (this was back in March 2013) I decided to cut/delete the folder Automatically Add to iTunes and moved it to one of my external hard drives (this folder for some reason contained mostly everythiing that was in the iTunes Media folder).
Make a shortcut to this folder on your desktop.
Nothing should be in this folder. When you put a file here, it will get moved by iTunes and added to the library.
The reason it had files in it is because you moved it. -
How can I sync my iPad 2 with my new MacBook Pro when it is already synced with my old MacBook? I am getting a message on the new MacBook Pro that says I am not allowed to sync the iPad 2 because it is synced to another iTunes library.
1) ensure iTunes is authorized for your iTunes store account(s)
2) connect your device and right-click or control-click it in the iTunes Source list, then choose transfer purchases from the shortcut menu that appears.
3) sync the device
iTunes will wipe the iPad but, since you transferred your purchases in the previous step, your content will be in your library and you can re-populate the iPad with it.
above works for purchases from the iTunes store. for everything else, check out this post by Zevoneer.
also, there are PhoneView and iRip. -
I've tried downloading iOS5 several times and after an hour each time I get a message that says my network connection has timed out. But I can't find any information about "timing out" or how to correct the situation. Any help?
Disable your antivirus and firewall, and try again.
-
My ipad hangs up after showing a message that says it "Cannot Access Find My Friends" and that I need to open the app and review my signin info to continue sharing. I can't go there because it is hung up. I also can't power off.
Perform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
When I try entering a new event in iCal on my MacBook Air, I get an error message popping up on my screen that says:
The server responded with “502”
The request for account “iCloud” failed.
The server responded with “502” to operation CalDAVSetPropertyQueueableOperation.
The request for account “iCloud” failed.
I am then given the option of staying Online or going Offline.
Can anyone help me?
thanksHello b.krushel,
Thank you for using Apple Support Communities
Any number of things could cause this issue, so I would recommend this article named iCloud: Troubleshooting iCloud Calendar found here http://support.apple.com/kb/TS3999.
These sections in particular:
General Troubleshooting
Make sure there are no current issues listed on the System Status that affect iCloud Calendar. The System Status is located on the iCloud Support webpage.
Make sure you have fully enabled iCloud Calendar for the client you are using (for more setup and troubleshooting information on iOS, OS X, Windows and iCloud.com, see the additional details below).
Check to see if the issue you are seeing is covered in iCloud Help. To search iCloud Help, visit help.apple.com/icloud.
Check your settings and preferences as something may not be set up correctly. For example, having incorrect date and time settings can cause issues which are easily resolved by entering the appropriate settings.
Troubleshooting Calendar on OS X Mountain Lion (iCal on OS X Lion)Note: For instructions on setting up iCloud Calendar with Calendar or iCal on your Mac, see iCloud Setup.If you are having trouble with Calendar or iCal on a Mac and you are using iCloud Calendar, try each of these steps, testing after each to see if the issue is resolved:
Make sure you are using OS X Lion v10.7.2 or later. Click here for help verifying the version of OS X you are using.
Make sure your computer is online. Attempt to view www.apple.com and iCloud.com. If you can't connect to the Internet, your iCloud calendars and events will not update in iCal. Click here for more information about troubleshooting your Internet connection.
Verify that your iCloud member name is entered into the iCloud Preference pane in System Preferences. See iCloud Setup for more information about setting up iCloud on a Mac.
Make sure you enter and update calendar information in the iCloud section of Calendar or iCal. Only calendars and events in the iCloud section of the Calendar or iCal Calendar list will be pushed to iCloud. Both Calendar and iCal for the Mac support the display of and interaction with multiple accounts and datastores, for example, iCloud, On My Mac, Exchange, Google, and so on. This makes it easy to create or modify events or calendars in a section of Calendar or iCal that may not be updating iCloud. Learn more about moving local calendars to iCloud.
In some cases, you may find that you have data duplicated in both the local On My Mac and the iCloud sections of Calendar or iCal. Learn more about resolving this issue.
You can make the iCloud calendar your default calendar for all new events. In Calendar on OS X Mountain Lion, choose Calendar > Preferences > General, or in OS X Lion, choose iCal > Preferences > Generaland under the Default Calendar heading, select one of the Calendars under the iCloud heading. Close the Preferences window to save this change.
If recent changes simply don't appear, try forcing Calendar or iCal to refresh by selecting Refresh All from theCalendar menu.
Make sure your account was successfully created in Calendar on your Mac (or iCal). After upgrading to iCloud Calendar, you may need to quit and reopen Calendar (or iCal). To confirm your account is configured correctly in iCal:
Open Calendar (or iCal).
Open Calendar (or iCal) Preferences.
Click Accounts. You should see an account with your iCloud member name entered.
Turn iCloud Calendars off and back on
Quit Calendar (or iCal).
Choose Apple () menu > System Preferences > iCloud.
Remove the checkmark in the checkbox next to Calendars.
Close System Preferences and wait about a minute.
Open System Preferences and choose iCloud.
Replace the checkmark next to Calendars.
Close System Preferences.
Open Calendar (or iCal) and test to see if the issue has been resolved.
Restart your computer. This may sound simple, but it does reinitialize your network and application settings and can frequently resolve issues.
Take care,
Sterling -
I have recently purchased Toshiba 1TB hard drive and I set it up and I was able to transfer all my files onto it such as my music, photos, documents. I had correctly ejected and used it again and all these files were safely stored and accessible afterwards. However after I rebooted my computer as it had been going slow and I had too much clogging it up once I reconnected the external hard drive I have error message saying 'The disk you inserted was not readable by this computer' Three options are Initialize, Ignore or Eject. How do I access all my files? I set it up to work on both mac and windows. I have tried both another mac and windows computer and same issue occurs?? I am worried that all my personal files are gone but am confused as the drive has had absolutely no damage to it as it was in a very short time frame and its never left the same spot. Any help would be greatly appreciated. Thanks
Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks -
I got a message on my MacBook pro screen that says " Safari Alert" and then goes on to say "suspicious activity might have been detected". It doesn't let me exit the site and keeps reappearing even after I force quit Safari and even after I shut down my computer and turn it back on. What can I do?
Launch Safari with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet.
(116847) -
I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?
No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest. -
I have a message box on my iPad screen that says,
"iCloud Backup" This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi.
I cannot touch the 'OK' button to make the message go away... if I touch the 'OK' a few times the iPad turns off. I'm stumped... any suggestions?? Thanks, LindaPerform a Reset...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
I am getting an error message with my snap scan ix500 that says the Evernote is not installed properly when I try to transfer it. I have uninstalled/reinstalled evernote and the scan snap softward but it still doesn't work. Anyone know where evernote stores their files on a Mac? Or had this problem.
Are there any dialog boxes popping up behind your Yahoo screen?
I have intermittent problems attaching files in Yahoo mail and this is usually the reason. I'm also using an iMac (10.7.3) and this is likely the problem.
It is generally a Yahoo issue rather than a Mac problem.
Maybe you are looking for
-
Why can't I associate file extensions within SSMS 2014? I want .TAB, .PRC, .UDF, etc. to open as a .SQL file would, i.e. connected to a server and with appropriate syntax colour coding. Adding an extension in Tools\Options\Text Editor\File Extension
-
Error while opening the web page
Hi, i am trying to start the srm login page using web. with the service BBPSTART..its not opening it shows ' Firefox can't establish a connection to the server at xxxx.xxx'. what might be the problem... kindly help me with it... thx.
-
Hi, I am having a typical problem here. Is there any way I can set a namespace to an XML string before I convert it into a Document. The problem is I have this XML string and I am trying to parse it, but I get a java.io.Nullpointer Exception because
-
I can't remember my password to ichat
how do i reset the password and /or user id for i chat?
-
GE/Fanuc Series 90-30 Ethernet Driver?
Is there a LabVIEW driver available for GE/Fanuc Series 90-30 Ethernet PLCs besides the NI IA Server? I have an application that requires the reading of approximately 600 PLC registers and the IA Server is too slow. I think a driver that performs arr