A message says RT sys isn't connected to the net. I can ping and it responds.
I am trying to connect to a PXI-8145 RT controller using ftp via internet explorer. It was working before,and now I get a message saying the real time system is not connected to the network. I can ping the address, and it responds just fine. I can also target the RT system and run vi's on it. How do I get ftp to start working again?
Hello,
Since you are able to FTP using MAX and other software, I would think that you might be having some kind of setting that is blocking IE. I did search for some issues in our database and entering ftp:\\ip address works always. Have you tried accessing the RT controller from another computer using IE? I would defnitely look more closely into IE settings because everything else seems to be fine.
Regards,
Arun V
National Instruments
Similar Messages
-
I keep getting an error message saying "There was a problem connecting to the server. URLs with the type "file:" are not supported" Can someone help me locate and get rid of this error.
Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.
-
When installing HP 3054 wireless printer continue to get a message saying my mac is not connected to the network, but it is....What do i try?
looks like this is your network connection settings problem, you'd better only keep one network adaptor online and linked, if you do not understand how to setup windows routing, this is completely not firefox problem. buddy. wish you goodluck.
-
Each time I attempt update to iOS 6.1.1, I get a failure message saying I am no longer connected to the Internet. Which is not true. How should I proceed?
Daria-H, I get the same error. Trying on an iPad Mini.
Neto, I guess we could try plugging it to a computer. However, I am surprised I have to do that. It should work over the air, shouldn't it? -
When I try to enter te ITunes store a Message says ir is imposible to connect to the store.
I wat to to insto ITunes but i jeep gestiona a message saying it is imposible to connect to ITunes. Wat should I do?
You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702
Note:
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818 -
It downloaded fine, but when I attempt to install it won't verify, saying that I am not connected to the internet when I know that I am! Tried on several wifi connections while plugged into power source. Any advice is appreciated!
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I've tried the troubleshooting things that I've seen, but it still doesn't work. The wifi notification on top says that I'm connected, but I can't get to any websites.
Help!!The wifi symbol only indicates the presence of a wifi signal, not that you are connected.
Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
After I select to install Windows Support Software on a USB external drive for Windows 7 the computer says I'm not connected to the internet. Obviously I am or I would'nt be typing this message.
See here for Connection Issues
http://support.apple.com/kb/TS1379
From Here
http://www.apple.com/support/itunes/troubleshooting/ -
The message i get is the following:
Windows could not connect to the Group policy client service. This problem prevents limited users from logging on to the system As and administrative user you can review the system event log for details why the service didn't respond.
This happens after restarting my laptop. It takes longer than usual and once it has booted up and loaded Windows Vista, I get the message on the right bottom corner as a window popping up.
I can still use my computer but a lot of my user account settings are not there.
I fixed it temporarily by rebooting using the option: boot up using my last successful configuration. Bu once I restart again the same thing happens.
How can i fix it?
Thanks.Hi,
Please try the solutions on the following threads:
http://social.answers.microsoft.com/Forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-bfba-7a98e642c009
http://social.technet.microsoft.com/Forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1
If the problem continues, please let us know if the computer is in a domain environment.
Regards,
Bruce -
I noticed this week an exclamation mark on the time machine icon on the menu bar.
My Macbook, iPad and iPhone all connect to the network but i get "there was a problem connecting to the server..."
When I open the preferences the time capsule is off but turnign it back on sends me in a loop of selecting the Time Capsule device (which has a nice green light etc) and then getting the error messgae about being unable to connect. I've pulled the plug a couple of times (this has worked in the past) but no change.
Any advice would be welcome before I try a factory reset or have to return to Apple for repair (the one thing they are offering as the thing is only 5 months old)I also noticed that when I go to finder I see two MacBook Air's that are in my name but have the number (2) and (3) next to the name.
That is a well known bug in Yosemite.
Try open System Preferences (gear icon on the dock)
Open Sharing
Edit back to the correct name for your Mac
This may...or may not help. But, it won't hurt.
The Mac's name may stay stable....or you may see (2), (3), etc again soon.
Be sure to restart both your Mac and the Time Capsule after you do this. -
How come I need to be connected via Wi-Fi to use Apps. I am connected vis a server and I can download from I-Tunes.. confusing.
It depends on the app. Some apps require internet access and some don't.
-
If anyone has experienced this issue and has a way to solve this problem I would greatle appreciate the help.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network -
For some reason when I open iTunes, and try to access the itunes store, help, my account, or anything else I get a message saying that I'm not connected to the internet, even when I know that I am. What's wrong?
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
I have tried 4 days to get iTunes 10.4 working on my Win7 x64 machine. I purchased a new iPhone4 and after syncing it the first time, I can't connect to the iTunes store.
When I try to run iTunes Help, I get this message "iTunes Help is unavailable because your computer isn’t connected to the Internet." However IE9 and Google Chrome run as always...... no connection problems.
I have already uninstalled IE9 x64 and iTunes 10.4 x64 and reinstalled but still the same. I followed all the instructions I could find about firewalls, ports, SSL etc.
Diagnostice gives me this information:
Secure link to iTunes Store failed -----
Microsoft Windows 7 x64 Ultimate Edition Service Pack 1 (Build 7601)
DELL Inc. Studio XPS 435T
iTunes 10.4.1.10
QuickTime 7.7
FairPlay 1.12.20
Apple Application Support 2.0.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.1.2
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.2 (333.2)
Gracenote SDK 1.9.1.485
Gracenote MusicID 1.9.1.102
Gracenote Submit 1.9.1.133
Gracenote DSP 1.9.1.43
iTunes Serial Number 00CCABA00E06CFD0
Current user is an administrator.
The current local date and time is 2011-09-08 09:53:57.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon HD 4800 Series
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: 226dfd82342c16c01da33b35a257182c
iPodService 10.4.1.10 (x64) is currently running.
iTunesHelper 10.4.1.10 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {DA96EEE0-050D-4F34-86AF-08A8499F6D4A}
Description: TAP-Win32 Adapter V9
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 08:00:00 1970
Lease Expires: Thu Jan 01 08:00:00 1970
DNS Servers:
Adapter Name: {B28305D7-F1F3-471E-8E55-AA9DC8E1058D}
Description: Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20)
IP Address: 10.0.1.8
Subnet Mask: 255.255.255.0
Default Gateway: 10.0.1.1
DHCP Enabled: Yes
DHCP Server: 10.0.1.1
Lease Obtained: Thu Sep 08 07:46:11 2011
Lease Expires: Fri Sep 09 07:46:11 2011
DNS Servers: 10.0.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-09-08 09:24:52.
This means everything was successful except connecting to the firmware update server.. why can't I connect to iTunes store??????Only fixed this in the last day or two . . .with this!
https://discussions.apple.com/thread/3588501?start=0&tstart=0 -
Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.
Hello Sue,
I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
Michael
Maybe you are looking for
-
Is "export frame" the highest quality?
Hi. Sometimes I want to have a video clip freeze. That is to say, the final product will have two or more frames that are identical, taken from a single frame of a movie clip. The way I've been doing this is using the Source or Program monitor to f
-
Is there any higly skilled professional or Expert in SAP BI/BW
My Dear Friends Is there any higly skilled professional or Expert in SAP BI/BW I only see the simple problems & solution with assigned points but not the questions raised to you ppl. Thank you for not getting the solution of my queries.
-
How to update database table !!!
hi all, Please advice how to update database table with certain cndition needs to be checked. Please consider below scenario. have used enqueu and dequeue function to lock entries and also i have used BAPI so considering that return parameter . i wa
-
HT2534 where is the 'none' option under payment method?
can anyone help me....
-
I have created a scenario in the Developement Work Repository and exported as an XML.Now i logged in to my Execution Work Repository , and when im trying to import this , i am not able to see that XML list.Instead the folder where i have exported thi