A message to Adobe.

A message to Adobe.
Yes this includes all the people working on the forum, that would be JC to zeno, as well as all the Adobe suits. Personally I have never seen the comments forum so busy and the product forums so slow.
Please Keep in mind that we the users want the best for these forums, we are the people that ultimately use them. For this reason and this reason only we are making lots of noise about the unuseability of these forums. What Adobe had was something that was fast  and convenient for the professional to pop in and help or find out information as well as a simple, clean looking layout. Now what we have now is slow and undesirable with a system full of googas that take up precious time and screen space in a professional environment.
We want something that is good for Adobe and the users, and what we have now is not it. As much as you may try and convince yourselves it is. I realize this will fall on deaf ears just like all the other criticism, but I can only hope that one person or suit will actually see this and understand how poorly this new forum reflects on Adobe. Adobe needs to stand out from the rest of the pack not blend into the mediocrity of every other forum without the simple functionality of Webcrossing.
Adobe do the right thing, admit this is wrong and go back.

Claudio González wrote:
PJ, I have just read again everything I have posted in this thread, and I really do not find anything rude or disrespectful in my words. And, as you can see from my previous post, I'm quite willing to make efforts to tone things down. However, from reading other posts, I see I'm not the only one to be tired of the too many wisecracks we have been getting lately in this forum. And I at least think they do not help in the least to get us any nearer to any solution to the many problems of the new version of these forums...
Ansury in quote I used, said there has no one to seriously ask to tone down the Forum in general. Will I seriously asked to tone it down and got a Resounding Jive-Off! So the attempt failed.
If all the employees That frequent here see is a lot of Cussing or shouting. How are they expected to view the comments. On the other hand if some one try to suggest a possible theory for a problem Or make a suggestion. And its roundly made fun of. Then how's that to be taken also.
I want this sytem to succeed, because it the only game in town now. So I try to make reasoned suggestions, and in a normal tone of voice. I've found in life cussing and shout doesn't do any good. In fact the opposite happens, the person(s) directed to just clam up  and get the heck out. Then all that has been accomplished Is raising your blood pressure and adrenalin. Which doesn't improve your health.
Sure I've punched back a time or two, when constantly beat on, you have to defend yourself.
I remember I used to be beat up and bullied when I was in Elementary school, was taught to turn the other cheek. Finially I one day got fed up and unleashed 6-7 years of pentup anger on the next person that picked on me.
It took six neighborhood boys and two parents to get me of the fellow . I was throwing rights and lefts so hard while I was sitting on him I broke his nose and jaw. My hand hurt for days. We became friends after that, the bullying stopped.

Similar Messages

  • Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Having problems with Bridge shutting down after saving photo in PS Cs5,,,,,,,,,  Also when i attempt to update either PS or bridge get an error message in Adobe application manger "Error loading updater workflow"

    Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
    The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
    However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
    I can open the RAW file only if I restart my computer - very annoying!
    However, thanks for the advice about the video card & memory.
    So, I'm still stuck as to what the issue is.

  • I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I am trying to download an epub book from the library, which I have been doing for almost a year. Now I am being asked for my adobe id, which I enter and I get an error message stating Adobe Activation Request Error:2004.. What's this ?

    I downloaded Blue Fire Reader and it requested an adobe id. I clicked on the link that was in the error message stated http//adeactivateadobe.com. Found out that if the date and time on my Ipad is wrong that it won't let me download a book. I was off 5 hours. I reset my clock settings and adobe id let me download a book from the library. I am back to using Overdrive and adobe again on my ipad.
    Thank you.

  • Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Edit

    Having installed an upgrade for Photoshop Elements 13, I cannot open the application. I get an error message saying "Adobe Photoshop Elements Editor cannot be opened because of a problem. Check with the developer to make sure Adobe Photoshop Elements Editor works with this version of OS X. You may need to reinstall the application. Be sure to install any available updates for the application and OS X".
    I have since uninstalled and reinstalled the app, but get the same error message.

    Which version of OS X do you have? It's not clear from your post whether "installed an upgrade" means you just installed PSE 13 as an upgrade or you installed an update to PSE 13, like ACR 9 or 13.1. Please clarify.

  • Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3

    Error message in Adobe Pdf in printer device panel when trying to create a pdf document.  I have CS3 Web Premium with Acrobat Professional 8.  I use it fine on my old computer with Windows XP.  I recently got a new laptop with Windows 7.  I installed all my Adobe programs, and I think they are working.  When I look at Adobe PDF in the device section of the Control Panel it looks okay.  But when I try to print a Word, Photoshop, or HTML page in PDF, nothing happens.  I have tried printing both as File>print and using the PDF tab on the top menu bar.  I look at the device in the control panel and it has the yellow error warning symbol and suggests trying to troubleshoot.  I look at the document list and it says status "error".  When I try troubleshooting Windows suggests doing some Home Sharing and also suggests canceling the document I'm trying to print.  I tried re-installing just Acrobat 8 from CS3 (and have to use Photoshop CS4 disk for shared documents I guess).  I ran into a can't locate adobepdf_dll file, so did a web search on this issue and found a suggestion that I find and use the adobepdf_dll_64 file and may have to (I did have to) remove the "_64" for it to work.  I think I successfully reinstalled using that dll file- no errors came up anyway.  But still when I try printing/converting a photoshop, webpage, or word document into pdf, the pdf device in control panel still gives the error status on the document and gives the same troubleshooting advice.  Help?

    I just compared the properties between the two computers.  On the old computer it has the port as "My Documents/*.pdf".  On my new computer it lists the port as "LPT1".  I tried changing the port to "Print as File", but when I try printing a photoshop picture as pdf, I get a "Access Denied".  I then tried to create a new port on the device control panel.  I tried to create a local port "My Documents/*.pdf" port but was denied.  I ten tried to create a new port type and control panel asked for an INF file.  I wonder if this is where my problem lies.  Thoughts?

  • Error message from Adobe Reader. cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly. Print looks like gibberish

    Trying to view/print PDF documents from website. Print looks like gibberish and is unreadable. Problem is with the embedded fonts. Error message from Adobe says cannot extract the embedded font 'LICCMC+MyriadPro-Light'. some characters may not display or print correctly.

    Try Adobe support, that's not a Firefox support issue. <br />
    http://forums.adobe.com/index.jspa

  • Error message in adobe digital editions

    Hi.
    I am getting this message in Adobe Digital Editions when I open an epub I made
    "the document appears to have minor errors that might cause it to be displayed incorrectly"
    The epub is displaying fine. I checked in Adobe, Sony, FBReader, and Calibre.
    The html and css is valid. No warnings. Perfectly valid. All of it.
    Epubcheck gives it no warnings or errors.
    Some of the chapter titles in the table of contents are pretty long. Could that be a problem?
    I have no idea how else to check it to find out what could be causing this error. Does anyone have any idea?
    Thanks.

    I had this same problem.  epubcheck that I have on my desktop said no errors, but ADE would give the "minor errors" message.  I put some serious dents in my forehead from pounding it on the desk.
    I uploaded my ePUB to http://www.threepress.org/document/epub-validate/ and let it validate against schemas that I don't have and it gave me the clue that I needed.  Because I had exported my book from MS-Word using their awful HTML export and then (through a series of ordeals) converted it to XHTML and cleaned up all the uglies.  But, there was one piece I forgot to fix.  The encoding value in the top-level xml element. It was set to Windows CP1252.  It has to be UTF-8 or UTF-16.  When I changed the encoding, I had to fix some of the quote marks that I had missed in earlier passes.
    After making the encoding change and the final cleanup, I now have my book on my nook.
    I hope this helps someone else in the future.
    Eric

  • Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5

    imac 2.66 Ghz, Intel Core i5, OS 10.6.4.
    Error message for Adobe AIR 2.0.3 while trying to run Dreamweaver CS5:
    Adobe Air
    the installation of this app is damaged. Try re-installing or contacting the publisher for assistance.
    Tried several times to uninstall and reinstall from fresh download to no avail.
    I'm finding the instructions in the trouble shooting area a tad esoteric.
    Will there be an update to the installer released soon?

    Hi,
    I'm assuming your having troubles installing the 2.0.3 runtime?  If so, can you please try the instructions in this post?
    Thanks,
    Chris

  • Cannot install elements 10 on win 8.1. I get a message to download adobe support advisor to detect the problem. When I try this, I get a message that Adobe Support Advisor is discontinued

    I had elements 10 on a laptop and want to install on my desktop. I downloaded the program and get a message that it cannot be installed, possibly due to missing files. It says to download Adobe Support Advisor to detect the problem. When I do, I get a message that Adobe Support Advisor is discontinued.

    you need the matching exe file, too.  both should be placed in the same directory and then click the exe.
    Downloads available:
    Suite:  CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8
    Premiere Elements:  12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  12 | 11, 10 | 9,8,7
    Lightroom:  5 | 4 | 3
    Captivate:  7 | 6 | 5
    https://helpx.adobe.com/download-install.html
    Download and installation help for Adobe links
    https://helpx.adobe.com/download-install.htmlDownload and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • I have a mac computer.  I am trying to install flash player but get the message "install adobe flash player wants to make changes.  Type your password to allow this." I do not use a password to open the computer.

    I have a mac computer that uses no password.  When installing flash player I get the message "Install adobe flash player wants to make changes  Type your password to allow this.  I can't get past this message.

    Hi,
    To change your password you will need to open System Preferences, then open Users & Groups, click on Change Password.  Change your password to a temporary one, then when you have finished you do the same procedure to change it back, by typing in the temp password then leaving the new password blank.  Hope this helps.

  • How to resolve a "The Extension Package is invalid."error  message in Adobe Extension Manager CS5,6

    How to resolve a "The Extension Package is invalid.error message in Adobe Extension Manager CS5,6

    I'm using Windows XP Professional sp3.I've tried to install(unfortunately,to no effect,till now)Layers Control by Vadim Chtcherbakov ,Floating Adj by David Barranca,Photoshop Blending Modes by Rufus Deuchler,and The Fader by Capture Monkey.The  Adobe Extension Managers I have installed in my PC are 5.0.1 for CS5,and 6.0.8 for CS6...Thanks in advance for your consultation!

  • I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

    I've deleted Adobe Reader 11 and rebooted and reinstalled Adobe Reader 11 and I still get the error message that 'Adobe Reader is blocked because it is out of date'. Using Windows XP with the latest updates (SP3).

    Screenshots attached to email replies will not make it back to the forum; you need to login to the forum and post it in your topic using the camera icon in the editor.
    Google Chrome is a problem:
    if you use Chrome's own PDF viewer, the results are unpredictable.
    if you use the Adobe Reader plugin with Chrome, it may reject (block) it if it is not the latest version.  Reader 11.0.08 is the latest version for Windows XP, but Chrome may insist on the current version 11.0.10.
    My suggestion; use a different browser!

  • Blank error message in Adobe Reader

    I have Adobe Reader 9.1 on Windows 7 OS.  Often when I click on a link that opens a Adobe file I get a blank page and a BLANK error message from Adobe with only an "OK" to click.  If I go back and try again, I get the same thing but as they say, "third time is the charm" and the file will open.
    Any suggestions?

    Reader 9.1 is not compatible with Windows 7. Update to Reader 9.4.4 or the latest Reader X.

  • Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working

    Cannot open PDF files with Reader XI message appears Adobe Reader has stopped working. A problem has caused the program to stop working

    Which Operating system you are using?
    Can you open Adobe Reader by itself?  If so, try disabling Protected Mode [Edit | Preferences | Security (Enhanced)] and then try to open the file.

  • Error message generating Adobe Air output Unable to build a valid certificate chain for the signer

    error message generating Adobe Air Output: Unable to build a valid certificate chain for the signer.

    Are you talking about AIR Help produced by RoboHelp or an AIR application that you are creating?
    If the latter, please see the notice at http://forums.adobe.com/community/robohelp/airhelp
    If you are using RoboHelp, which version?
    See www.grainge.org for RoboHelp and Authoring tips
    @petergrainge

Maybe you are looking for

  • My iPad mini is no longer updating since last iOS update

    My iPad mini is no longer updating through iTunes since the last iOS update.

  • PDF's open in Read-Only Mode

    Hi, I purchased a Windows 8 (not pro) 64bit system and installed Acrobat XI Pro, I never installed Adobe Reader. The computer and Adobe are both fully updated and I am running into the following problem. I look for a pdf in my windows browser and whe

  • Missing Library Albums and Built in Smart Albums

    Hi, In AP3 I am missing the built in "Library Albums" with the associated smart albums (★★★★★,Rejected etc). I did a search and someone solved the problem by deleting the BuiltinSmartAlbums.plist located at user/library/application support/aperture a

  • How to pass .txt file as an attachment to the web service (SOAP Attachment)

    Hi, I am creating web service using NetBeans 6.5 IDE and JAX-WS. I create a web application and then create web service using provided interface. I want to add .txt file as an attachment/parameter to the web service operation using "Add operation" in

  • Iphoto calendar to print issue.

    When creating iphoto calendar to print the months of the year font changes to very small size. No text field available to change back.