A module reported an error 0x80004005 from call back which was running as part of rule

Hi 
a module reported an error 0x80004005 from call back which was running as part of rule. with event id 4503this error shown since delta monitor is enable!thanks

Hi,
What is your SCOM version, would you please try to install the newest update, and check the result.
And here is a similar thread, please refer to it:
http://social.technet.microsoft.com/Forums/en-US/28516ca3-ae97-49a2-bb72-d6814750813f/scom-warnings-and-errors-event-id-4503-10703-1103-and-10102?forum=exchangesvradminlegacy
Regards,
Yan Li
Regards, Yan Li

Similar Messages

  • "One or More Modules Reporting an Error"

    Hi,
    Please give suggestion on this error "One or More Modules Reporting an Error" message.
    Snapshot is attached for refrence.
    Thanks,
    Abuzar

    Abuzar,
         With the netwatch module, if you do not have an interface configured or there is no traffic being seen on the configured interface the module will display this error message.   This error can be ignored if you have not yet configured the module and is normal for an unconfigured module.
         To correctly configure the module configure a spare interface on your collector with an ip address and either span traffic to that interface or configure a DHCP helper to forward DHCP traffic to that interface.
    --Jesse

  • How a variable in C++ gets updated from calling a labview dll running in a loop?

    Hi,
    I have created a dll which is called from a C++ program. The dll has been created from a vi which continuously runs in a loop (this is necessary because I need to control some hardware in real-time). When I call the function from C++ I can see the front panel of the vi working properly, i.e. all variables are updated in real time on the labview panel (which I will set as not visible once i get this problem sorted out).
    However, I can't get the variables' values getting updated in my C++ program and I need these values to change in which way the hardware should behave ... is there any example somewhere in which something similar has been done? I have seen some examples where a dll is called from C++ with a vi function but not running in a loop. In these examples, the vi function passes the datum to the C++ software once is finished ...  
    thanks very much for your help,
    kind regards
    Sergio

    Hi smercurio_fc!
    Thanks very much for your answer!
    I have already an inter-process communication, where there are two threads running in parallel. In one thread the C++ code is running while in the other the LabVIEW code is running. The labview function is passing the "output" variables as pointers too.
    _1DScan(ReqForce,&StopAlign,0,&ReadForce,&Piezo_running,&RS232OK,&Running);
    the function is called using the following:
    void CFMControl::FMThreadProc()
        _1DScan(ReqForce,&StopAlign,0,&ReadForce,&Piezo_running,&RS232OK,&Running);
        return;
    When I run the C++ code I can see both threads working by seeing data being updated in C++ front panel (data that belongs to C++) and in labview fron panel (data that belongs to labview). However, when I try to use any of the outputs coming from labview I can't get them updated....

  • Webdynpro error - what happened calling the webdynpropage was terminated ..

    Hello,
    in WD-Application rendering by portal browsing with Firefox clicking a button it appears a popup.
    The same WD-Application rendering by portal  browsing with IE 6.0 clicking a button it appears not popup but a browser error-message
    "webdynpro error - what happened calling the webdynpropage was terminated due to an error.
    Error type: sapPopupMainIdX1"
    Where is the probem.
    We use Portal Netweaver 2004s, SP11 and as backendystsem for WD for Abap Netweaver 2004s, SP 09.
    Best regards
    Oliver Prodinger

    The issue was actually caused by a kernel problem, as described in the topic
    SAP NetWeaver 2004s ABAP Trial Version SP8 Troubleshooting Guide
    I applied the recommended bug fixes and now it works perfectly!
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6055f523-df6e-2910-f0bf-acccbb0a7d37">SAP NetWeaver 2004s ABAP Trial Version SP8 Troubleshooting Guide</a>
    Hope It will solve your problem
    Cheers
    Parag

  • HT201274 My new iPad (2) had a message that the iOS called Voice Over was running, everything locked up then went black and now it will not power up. I have plugged it into a power supply & still won't work. Any ideas?

    My iPad2 has a message that iOS called Voice Over was running, tap three times to turn off. Nothing will respond, it finally turned black and now iPad won't turn on at all. Any ideas?

    Thanks so much but none of that helped.  It was driving me crazy because it would back up another external drive.  I just changed the name of the drive from iPhoto/iTunes Library to Media Libraries and IT WORKED!! I guess for some reason it didn't like the drive being called iPhoto or iTunes ???? I don't understand but I have tried so many solutions and exchanging things out but the name change did it????!!!
    Thank you for your help and replying to this.  Guess I made my own issue!

  • Basically... I had an ipod touch sync'd to my dads i tunes.. i then got an iphone and created my own apple id.. how could i transfer the media from my ipod which was used on a different apple id onto my own account without everything deleting

    basically... I had an ipod touch sync'd to my dads i tunes.. i then got an iphone and created my own apple id.. how could i transfer the media from my ipod which was used on a different apple id onto my own account without everything deleting

    Syncing an iDevice to a computer does not remove content from the computer.
    Syncing an iDevice to a computer that it does not normally sync with will remove the content from that device.
    If the media was acquired with a different Apple ID it is in no way linked to your Apple ID.

  • How do I retrieve data from time machine from an old mac (which was running 10.5) on my new iMac running mavericks?

    How do I retrieve data from time machine from an old mac (which was running 10.5) on my new iMac running mavericks?

    See B 5/6.
    Time Machine Troubleshooting

  • Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

    Anyone having problems with Elements organiser 13 when try to import photos from Mac photos which was an upgrade from Iphotos on 9th April 2015. Before when I was using Iphotos all was ok...

    hi I have been trying to do this, but PE13 comes up with a fail message saying that file types are not supported, am only trying to import jpeg files so can't understand this.  So far have been unable to use PE13 at all, any ideas anyone please!

  • HT1386 I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do.  It won't work.

    I have an app called ipieta which was originally downloaded onto an ipod. I gave the ipod to someone else, but now that I've had the iphone I can not get the audio even though it is downloaded into itunes music like it said to do.  It won't work.  I've tried more than several times to get help but nothing helps. Do I need to deauthorize the ipod or perhaps erase all the downloaded ipieta stuff and start over?
    Thanks for any suggestions

    Sorry. There's nothing anyone can do. The current version of the facebook app will not run on 4.2.1. The iPhone 3G won't run anything higher than 4.2.1. You're stuck.
    Maybe it's time to buy yourself a new iPod Touch.

  • I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?

    I know this is supposedly not possible, but I need to retrieve a specific voicemail from my iPhone which was also "cleared" from the Deleted Messages box. Any suggestions?
    This is highly important. I know the number from which the voicemail arrived, but have not been able to figure out how to retrieve it. I accidentally had the voicemail in the Deleted Messages folder, and then Cleared this folder. If there is any possible way I might be able to retrieve this message, even if there is a cost associated with it, please help me.
    Thank you.

    I think you maybe able to restore from backup if that voicemail was included in the backup. http://support.apple.com/kb/HT1766

  • Why have iTunes charged my account when I've got a £20 voucher on my account and the. Had to arrange a call back what was 2 days ago they called me back tonight then said the department was closed this is a wrong I want my money back!

    Why have iTunes charged my account when I've got a £20 voucher on my account and the. Had to arrange a call back what was 2 days ago they called me back tonight then the automated voice said the department was closed this is a wrong I want my money back! Or I'm gonna sell my iPad my kids iPods and iPhones mine and my wife's iPhones and the mac this is a **** take

    We are fellow users here on these forums, you are not talking to iTunes Support nor Apple.
    Were you buying content for yourself or gifting to another account ? If you were gifting content or an amount then that can only be done via credit card). If you weren't then you will need to contact iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page

  • I have an imap account and deleted all mail from server. Once doing this all emails from my iPad -which was on a wi-fi- where automatically deleted. Fortunately these emails are still visible on my iPhone that was without connection. If I send all these e

    I have an imap account and deleted all mail from server. Once doing this all emails from my iPad -which was on a wi-fi- where automatically deleted. Fortunately these emails are still visible on my iPhone that was without connection. If I send all these emails to my iCloud account - they will remain into my outgoing folder until I open my wi-fi- …BUT will they be sent when I open my wi-fi connection, or since they are no longer on my server… be deleted for ever!?

    This is how IMAP works, if you delete from one device it will also be deleted in the other devices.
    iCloud do not backup e-mails.

  • ADF-BC/JSF How to display acustom error message from a backing bean

    Hi all
    Can anybody provide an example of how to manipulate the list of error messages from a JSF backing bean.
    In my code I use a different navigation case and this directs the user to the page displaying the error message but I am sure that there must be a more elegant way.
    Thanks in advance
    Thanassis

    Thanks Kris
    I think you 've put me on the right track here, it's just that in my case what I really want to do is prevent my users from editing records not belonging to their own group. This is done via a selectOne table component and then the backing bean code tests if the value #{row.UserGroup} matches the #{bindings.LoggedOnUserGroup.inputValue}. If the values are equal then the beans returns the navigation case to the edit page. Otherwise it returns the navigation case for the "cannot edit" page.
    So what I am thinking is to return null and somehow raise the right kind of exception in order to display the error in the af:messages tag.
    Thanassis

  • Upgraded from Lightroom Beta which was on a hard drive which has failed now want to install my upgrade unto new hard drive.

    When lightroom first arrived on the scene, it was in the beta stage and had unlimited free access.  I liked it and when Lightroom 2 came out I upgraded from Adobe.   That was on my old computer whose hard drive has failed.  So now wish to install my Lightroom 2 on my new computer.    It asks for the Original serial # which I do not have access to.   Since my original version was a beta how can I get a serial # for a version 1.0 ?

    When lightroom first arrived on the scene, it was in the beta stage and had unlimited free access.  I liked it and when Lightroom 2 came out I upgraded from Adobe.   That was on my old computer whose hard drive has failed.  So now wish to install my Lightroom 2 on my new computer.    It asks for the Original serial # which I do not have access to.   Since my original version was a beta how can I get a serial # for a version 1.0 ?

  • XL Reporter Runtime error - upgraded from SBO 2005A to SBO 2007A

    Hi Experts,
    We upgraded our client SBO 2005A to SBO 2007A. We have this issue with XL Reporter that everytime we go to Advanced Report Builder-> Cell -> Transaction Row -> Attribute ->ARP_Series we are getting IXSelectionBarctl error window that says Run-time error '0', and the only option you have is OK. After pressing OK, it returns another IXSelectionBarctl window error:
    Run-time error '-2147418105 (80010007)'
    Automation error
    the callee (server (not server application) is not available and disappeared; all connection are invalid. The call may have executed.
    After pressing OK button the Advanced Report Builder is still visible but no longer accessible.
    Here is the command under Attribute I'm trying to access.
    "FIG( SO_DocDate = @d1:@d2 And ARP_Series = "1" ) ARDT( Code = "Invoice" )"
    Also, this report does not display the item quantity recorded in the invoice. It returns no data when running the report.
    I think the problem is that the ARP_Series is no longer available in 2007A, if not where do I find the series or somewhat similar to ARP Series function?
    Any help will be greatly appreciated.
    Thank you!

    Please check this thread:
    Unable to connect XL Reporter in 2007 B
    Thanks,
    Gordon

Maybe you are looking for