A movie clip before the actual DVD menu

Hi there,
Excuse me if this has been discussed earlier and please post a link to that topic so I don't pollute the forum.
I would like to author my wedding DVD, using Premiere Pro CS3 and Encore CS3, with a menu, where before the actual buttons a movie appears that has to be watched before one can select a chapter or fast forward.
You see this in commercial DVDs where a copyright warning has to be read and cant be skipped.
Thanks a lot for the effort.
Cheers,
Omar

TheDoc:
If you simply right click on any timeline in the project window, you will see a list of options for that timeline starting with "Transcode Settings". If you look down that list (about 3/4 the way down) you should see "Set as First Play". Click that and you should notice that a little 'play' button has embedded itself on the timeline icon next to the timeline you just chose.
Secondly, in the properties tab for that timeline there will be a space labeled "Operations: All Permitted." Encore permits all operations on a DVD by default. If you do not want anyone to be able to skip over this intro before the actual menu, click the button that says "Set..." and simply check the box next to "None."
Now, all you have to do is make sure that there are no End Action's, Overrides, or Menu Remote buttons that link back to that First Play and you should be all set.
Tony

Similar Messages

Before the main DVD menu

Hi there,
is there any way to place a short movie (2-3 minutes) before the main DVD-Menu? With that I mean, when I put the DVD in the player, I would like it to start directly with a little intro - like in some movie, in always start with advertising or similar - and then I would like the main DVD-menu to come.
Is there anyway to do that with iDVD?
Thanks for any ideas and answers!
W2006

I believe you'd just drag and drop your QT movie to the autostart well while in map view. Try it.
Click Here
It's the very top box that you drag and drop any QT movie you'd like to start the presentation afterwhich it should return to the main menu. It looks very similar to iDvd6 also:
Message was edited by: SDMacuser

How do I inactivate all other movie clips except the running one.

Hello guys
I would need help to inactivate all other actions on movie clips while the active movie clip is running. So in my flash scen when the user makes a roll over on a movie clip I would like that movie clip to play all frames in that movie clip before the user can roll over on an other movie clip. So the active movie clip don't gets interupted. What actionscript 2.0 should I look for?
Thanks!
/Klas

You could use a boolean variable in a conditional that wraps whetever functionality the objects have to prevent them from taking those actions. So when you rollover an object it starts to activate its animation or whatever and sets that boolean to prevent any others from doing the same. And when it completes its actions it rets the boolean.
If you show your rollover code it might be easier to show an example, but it might be something like...
var allowPlay = true;
mc1.onRollOver = rolloverFunction;
mc2.onRollOver = rolloverFunction;
mc3.onRollOver = rolloverFunction;
function rolloverFunction(){
   if(allowPlay){
       allowPlay = false;
       this.play(); // or whatever action your rollover executes
and when that animation completes the movieclip resets the allowPlay to true.
_root.allowPlay = true;

Hi, I want to play a short intro clip before the menu appears on the dvd, anyone know how please?

Hi, I want to play a short intro clip before the menu appears on the dvd, anyone know how please?
Alan Greenall

Search in the user guide PDF for...
FBI
or
first play
For easy searching, download the product user guide PDF(s)
The individual CS5 pages also have links to the earlier user guide pages
CS5 User Guides - online and PDF (right click PDF link to save PDF to your hard drive)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html

How do I add video to play before the actual menu?

I want a warning to pop up before the actual menu and can't figure it out. I just installed DVD Studio Pro today after using iDVD for over a year. Please help me out with some detail! Thank you so much! Also, and this sounds terribly stupid, but how do you add audio to the menu?? Sorry! But thanks!

Hi Alex
Create another menu and put your warning there. Set your "at end" to time out and set your action to the Main Menu. Drag your video and audio assets from the assets to the menu viewer. It helps to read the manual first then ask questions
Good luck...let us know how it goes.

How do I recerence Movie Clips on the Main Timeline from inside a class?

Hey everyone, this might be a stupid question but I thought
I'd ask cause it's making me nuts. I'm all of 2 days into AS3
(coming from not using Flash at all in YEARS) so feel free to
consider me ignorant. I do have plenty of application development
experience in other areas though.
I can't seem to create a class that can reference an instance
of a movie clip on my main timeline. I'd post code of what I've
tried but I've gone through so many desperate edits & wild
guesses that it was just garbled junk before I deleted it all.
Basically here's how I figured Flash could work, though maybe
it doesn't work this way at all.
I'm assuming that with AS 3 being so big on being a true
object oriented environment, I wouldn't need to mix my code and
interface together. Preferably I'd be using the Flash authoring
tools just to design my interface. Create a button... place it
somewhere... give it an instance name. Roughly the equivilant of
Apple's InterfaceBuilder for those of you that might be familiar
with Cocoa development. I can see maybe having to put a few lines
of ActionScript onto frame 1 (though really I'm hoping Flash would
have a better method of kicking off the application at this point
that using code tied to frames) to load my classes & such, but
after that I'd like all of my code to be held in external class
files.
So maybe I've got:
Interface.fla - My interface
Button_1
Button_2
TextField_1
Main.as - My main controller class using to handle all of my
applications behavior
SomeClass.as - Some helper Class
SomeOtherClass.as - Some helper Class
Main.as would have instructions in its initialization method
to go ahead & attach events to buttons & initialize
anything else that needs to happen when the application starts.
From there on it would all be objects communicating back &
forth. Button_1 would get clicked with would fire
Main.someMethod(). Main.someMethod() would then do it's thing and
set the value of TextField_1. All very clean & code is very
separated from interface.
Unfortunately I can't for the life of me figure out how AS3
classes reference each other like that. There doesn't seem to be
any kind of a global 'root' or '_root' I can use to locate any
movie clips on the stage. I've searched the help & the web for
any kind of simple tutorial but to no avail. My job has tasked me
with building a flash app for a project but I'd really rather not
have a tone of ActionScript just shoved into frame 1. That just
seems... ugh! (::shudder::)
Can someone maybe point me in the right direction here? I'm
really willing to do my homework but I can't seem to locate the
info I need to get started. Also, is there an ActionScript IRC
channel or something maybe?
Thanks,
Cliff

I worked with the problem last night and the solution I
started coming to involved creating my own custom document class
based off which extends MovieClip. My thought is that way I have
access to the initialization routine of the timeline itself and
that all of the elements on the main timeline should be
"properties" of my custom class.
Is this correct? Is there a down side to doing this & if
so what is it & why?
Also, just for my reference, the last time I did anything
with ActionScript I think I was using '_root' to target the main
timeline. WHat are the global variable names in AS 3? Is it just
'root' & 'stage' or 'Root' & 'Stage' or what?

The first DVD menu doesn't support "clicking" with the cursor

I just created a disc image of my iDVD project and I have found that when I run it using the DVD Player, I can't navigate the first DVD menu with the cursor. The only way I can move through it is by using the arrow keys and then pressing "return" or "enter."
When I preview my project in iDVD I don't have this problem. Any ideas as to what is going on here? Has this question been asked and addressed? I wasn't able to find any posts that outlined a similar problem...
Any help would be greatly appreciated.
Thanks,
Aaron

Has this question been asked and addressed? I wasn't able to find any posts that outlined a similar problem...
Any help would be greatly appreciated.
Let me know if any of these links are helpful:
http://discussions.apple.com/thread.jspa?messageID=5940413&#5940413
http://discussions.apple.com/thread.jspa?messageID=5575979&#5575979
http://discussions.apple.com/thread.jspa?messageID=5402707&#5402707
http://discussions.apple.com/thread.jspa?messageID=5550606&#5550606

How to keep a Movie Clip on the screen for 5 secs.

I am having trouble with keeping a movie clip on the screen.
I am setting it up to play a movie using the .onPress function. It
is calling the movie but only shows it for a split second. How can
I make the movie stay on the stage for 5 seconds? Here is how I
have it coded:
rc1MC.onPress = function() {
if (rc1MC.hitTest(_xmouse, _ymouse, false)){
_global.correct++;
updateStats();
var c1:MovieClip = this.attachMovie ("correct1_mc",
"correct1",4300);
var ymov = this._y;
var gravity = 20;
c1.onEnterFrame = function() {
ymov += gravity;
xmov *= 0.5;
c1._rotation += 5;
c1._x += xSpeed;
c1._y = ymov;
if (c1._y>stageHeight) {
c1.removeMovieClip();
delete this.onPress;
Thanks Brandon

Got my answer...
http://forums.verizon.com/t5/FiOS-TV-Technical-Assistance/For-Those-of-You-Who-Want-to-View-Subscrib...

HitTest for multiple Movie Clip at the same time

I have a movie it is a triangle.I duplicate it and I want to hitTest on the first triangle movie clip and I added 3 different line movie clips on the 3 side of triangle.I tried to write a code something like that.
if(firstTriangle_mc.hitTestObject(line1_mc,line2_mc,line_3mc){
trace("Ok");
but I've got error.I think it is not allowed hitTestObject for multiple Movie Clips.So is there anyone have an opinion about it?What should I do?

Here is another test for multiple movie clips for hitTestPoint but only the first work the others don't
uc_mc.addEventListener(Event.ENTER_FRAME,hitle);
function hitle(e:Event) {
if (uc_mc.hitTestPoint(cub1,cub1Y,true)&&(cub2,cub2Y,true)&&(cub3,cub3Y,true)) {
uc_mc.alpha=0.5;
}else{
uc_mc.alpha=1;
The code above doesn't work.What should I do?

Passing a variable from a movie clip to the main timeline

Hi,
I'm having trouble passing a variable from a movie clip in my
flash file to the main timeline.
I have a movieclip with the instance name IntroNav which
contains several buttons. Clicking a button sets the variable
"page" to a specific name, i.e. page = "home"
However, outside of the movie clip, on the main timeline I am
unable to call this variable, and "page" seems to have no value.
Can anyone tell me why this is and how to solve it?
Thanks

Umm, yes ... declare your variables correctly.
var page:String = new String(); //proper complete
var page:String; //strict typing
var page:String = "home"; //stirct typing with value
declaration
Do not declare the variable in your buttons, you would have
to do so in every button and be constantly resetting the value.
Declare it on the main timeline at the lowest level. You do not
need to use it as a _global, you just need to resolve your path
issues. You can 'set' the variable value from a button, without any
problem, but you have to call to the variable correctly.
You do not 'name' a variable as "_root.page" , the '_root'
refers to the lowest level of the SWF or the main timeline, as does
a call to ' _level0' (that's a zero). If the variable is declared
on the main timeline, and you're calling from the MC/button or
anywhere you can refer to the variable by calling to it by
the proper path of '_root.page'
To set the variable from any of your button/MC instances
call:
_root.page = "value"; OR _level0.page = "value";
But you must have the varibale declared on the main timeline,
and only once and the playhead should be stopped or it will reset
the value to the default upon looping.

Dynamically adding multiple instances of a movie clip to the stage with one button

hello,
I was wondering if there was a way to add several instances
of the same movie clip to the stage dynamically utilizing one
button.
I can do one with the following code placed on the button...
on (release) {
attachMovie ("filledCircle", "filled1", 5);
filled1._x = 370;
filled1._y = 225;
But I want the user to be able to hit the button again and
get yet another instance of "filledCircle" on the stage.
I also want the user to be able to drag these instances
around...
Any help would be appreciated...
Thanks,
Muhl

Muhl,
> I was wondering if there was a way to add several
> instances of the same movie clip to the stage
> dynamically utilizing one button.
Sure thing.
> I can do one with the following code placed on the
> button...
>
> on (release) {
> attachMovie ("filledCircle", "filled1", 5);
> filled1._x = 370;
> filled1._y = 225;
> }
Gotcha.
> But I want the user to be able to hit the button again
> and get yet another instance of "filledCircle" on the
> stage.
You're in luck, because this isn't very hard to do. The main
thing to
keep in mind is that each instance must have A) its own
unique instance name
and B) its own unique depth. In your example, the instance
name is filled1
and the depth is 5. The next clip's instance name should be
filled2 at a
depth of 6. Then filled3, depth 7, and so on. You can use a
single
variable to handle the incrementation.
// code in a frame
var counter:Number = 1;
// code on your button
on (release) {
attachMovie ("filledCircle", "filled" + counter, counter +
4);
With me so far? The variable counter contains the numeric
value 1. The
second parameter of attachMovie() is provided with a
concatenation of
"filled" + 1, which makes "filled1". The third parameter is
provided with
the sum of counter plus 4, which makes 5. Obviously, we need
a bit more.
The button must, in addition, increment the value of counter.
The ++
operator handles this perfectly.
on (release) {
attachMovie ("filledCircle", "filled" + counter, counter +
4);
counter++;
Now, it seems you also want to position the attached movie
clip to (370,
225). Are they call supposed to go to the same place? If so,
you may use a
second variable to hold a reference to the newly attached
clip. Look up
MovieClip.attachMovie(), and you'll see that the method
returns the exact
reference you need.
// code in a frame
var counter:Number = 1;
var mc:MovieClip;
// code on your button
on (release) {
mc = attachMovie ("filledCircle", "filled" + counter,
counter + 4);
counter++;
mc._x = 370;
mc._y = 225;
Make sense?
> I also want the user to be able to drag these instances
> around...
Then you need to handle a few events. You're dealing with
movie clips
here, so your best bet is to study up on the MovieClip class,
which defines
all movie clips. (Note, also, that the TextField class
defines all input
and dynamic text fields; the Sound class defines all sounds,
etc. This is a
very handy arrangement of the ActionScript 2.0 Language
Reference.)
// code in a frame
var counter:Number = 1;
var mc:MovieClip;
// code on your button
on (release) {
mc = attachMovie ("filledCircle", "filled" + counter,
counter + 4);
counter++;
mc._x = 370;
mc._y = 225;
mc.onPress = function() {
this.startDrag();
mc.onRelease = function() {
this.stopDrag();
Easy as that. You're simply assigning a function literal to
the event
of each new MovieClip instance as you create it. Take a look
and you'll see
each of these class members available to you -- that is, to
all movie clips.
MovieClip.onPress, MovieClip.startDrag(), MovieClip._x, etc.
Wherever it shows the term MovieClip in the Language
Reference, just
replace that with the instance name of your clip -- or a
reference to that
clip (which even includes the global "this" property).
David
stiller (at) quip (dot) net
Dev essays:
http://www.quip.net/blog/
"Luck is the residue of good design."

Pricing conditions for the articles are getting triggered one day before the actual activation date to 3rd party systems through job WPMU.

Hi SAP Guru´s,
Currently we are sending the pricing, promotions & article master data delta load to 3rd party system from SAP ECC via SAP XI through IDOCS using daily scheduled batch jobs WPMU. IDOC segment - WP_PLU.
Here the issue is the promotion & pricing data are sent to 3rd party system one day before the actual start date.
Eg: Promotion 123456 which has start date as 15/05/2014 & ending on 30/05/2014 & was created & activated on 13/05/2014.
This promotion 123456 is getting triggered from SAP ECC through batch job on 14/05/2014 morning & 3rd party system receives the data on 14/05/2014 & the promotion are getting activated at 3rd party system end on 14/05/2014 itself which actually gets active from 15/05/2014.
Same in the case for Standard Pricing data which needs to be active from 31/05/2014 once the promotion 123456 ends on 30/05/2014.
The standard pricing data gets triggered from SAP ECC on 30/05/2014 through batch job & reaching 3rd party system on 30/05/2014 & getting activate on 30/05/2014 itself.
This creates more issues at the store end as well as affecting business.
We checked at 3rd party system end & they replied that their system considers the updated time stamp & date to activate the prices & it does not considers the actual active from & active to date. They need the data to be sent from SAP ECC on the effective date of the pricing & promotions.
Can any one help me how to change the pricing conditions beign triggered through batch job in SAP ECC based on the actual promotion & pricing conditons start date or is there any other process to trigger the data through the batch job on the actual promotion & pricing data activation date.
Thanks in Advance.
Thanks & Regards,
P.P.Shankar

Hello Shankar,
Change the lead time in the POS Outbound Profile. You can't put less than 2 days there so data for today and tomorrow will be transferred which also means you need to adjust your batch timing accordingly.
Sales and Distribution -> POS Interface -> Outbound -> Maintain Profile for POS Outbound.
See if it helps. The best option would still be that the 3rd part system considers the activtion date.
Kind Regards
Kaizad

TS3899 Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.

Whenever I send an email, the person who receives it gets something that says References: and a long list on nonsense to do with Gmail before the actual message appears.
Here is an example....
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <CAM-_T=[email protected]> <BLU0 ,[email protected]> <CAM-_T=CAUP+9GyYG-_ecOazo=[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
> Mime-Version: 1.0 (1.0)
> In-Reply-To: <[email protected]>
> Content-Type: multipart/alternative;
> boundary=Apple-Mail-85351E4C-6385-4256-BE9E-27C10517E136
> Content-Transfer-Encoding: 7bit

It seems pretty clear to me.
When you turn off your primary account the only active account the phone can send via is your Gmail account, and that's what you're seeing.
The question is why do you need to turn off the primary account.. which you answer:
When that is set up as the primary server and turned on I get a message that says "the recipient was rejected by the server
That's because your ISP (megalink) is using access controls to manage who sends mail through their mail server. The first thing they're probably doing is using IP address restrictions - essentially saying they'll only relay mail from any machine on their network (including dialup/DSL/etc. customers), but you're not on their network, you're on an AT&T (or Verizon) 3G connection which isn't in their IP address range, and therefore not valid as far as their mail server is concerned.
The typical solution to this is authentication - by authenticating to their server (via username and password) you identify yourself as a customer and they should relay your messages. So check your phone to ensure that you have authentication enabled for your primary mail account.
If that fails (e.g. they don't support authenticated SMTP) the next option would be to relay the message through your cell provider's mail server - as an AT&T wireless customer you should be able to relay through AT&T's mail server... likewise for Verizon (or whatever national carrier your iPhone is on). You'll need to check with your carrier's site for the specifics of the mail server address to use.

Can NOT cancel/Reverse GI with a date before the actual GI date

Hi
can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
thanks

>
jo jo wrote:
> Hi
>
> can NOT cancel/Reverse GI with a date before the actual GI date, if i do the PGI in wrong date, then how should i do?
> thanks
Hi Jo Jo,
I am not sure if i understand your problem correctly.
As far as my understanding goes you are trying to reverse a GI on a date before Actual goods issue date.
If you have PGId on a date before planned GI date the system will update that date into Actual GI date and not planned GI Date.
For example if you planned GI date was 1st April 2008 and you did PGI on 28th April 2008 Actual GI date will become 28th April 2008.
So if you try to reverse PGI before 28th April you wont be allowed to as you cannot reverse a goods issue that has not happened.
Hope it helps.
Post furthur if i had misunderstood your problem.
Regards
Abhishek

Boundary for movie clips following the mouse

here's my AS...
myInterval = setInterval(KBMOglobal,15);
function KBMOglobal () {
KBMOglobal1._x -= (KBMOglobal1._x - _xmouse)/10;
KBMOglobal1._y -= (KBMOglobal1._y - _ymouse)/10-2;
ok, so my movie clip follows the mouse around, with a small
delay and the y axis is slightly lowered. the stage of my movie is
380 x 640. does anyone have any suggestions on how to create a
boundary, equal to the size of my stage, that does not let the
movie clips that follow the mouse extend past? does that even make
any sense? essentially, i would like the movie clips to follow the
mouse, the entire movie clip stay visible on the stage. because of
the positioning of the items on the stage that initiate this
function, i only have to consider the width of each movie clip,
which luckily is a constant = 200. does that make any sense? let me
try this all again....
how do adjust the above function so that the movie clip,
KBMOglobal1 (which has a width of 200) stay within the horizontal
limits of the stage (which is 380)?
thanks for your time and to everyone in this forum that has
been so very helpful with all my questions in this project so far,
yall rock!

quote:
Originally posted by:
NickTheNameless
this is almost working perfectly, however i need to adjust
the boundary of the x axis. for some reason, the movie clip stops
following the mouse when it reaches half way across stage,
horizontally.
would you please be so kind to explain what your script is
doing? because i'm not a total idiot, i realize i could probably
replace 380 with 760 (double the width of the stage) and it would
work as expected. however, if you could spare the time to explain
what the following two lines are doing, step by step....i'll give
you my first born.....
KBMOglobalGeneralCancelDispatch._x<0?KBMOglobalGeneralCancelDispatch._x=0:KBMOglobalGenera lCancelDispatch._x;
KBMOglobalGeneralCancelDispatch._x>380-KBMOglobalGeneralCancelDispatch._width?KBMOglobalG eneralCancelDispatch._x=380-KBMOglobalGeneralCancelDispatch._width:KBMOglobalGeneralCancel Dispatch._x;
thanks again for your time!
do you know ?: operator? it is like if...else... statements,
when we say:
somethingIsTrue ? do1() : do2();
it is exactly same meaning like:
if (somethingIsTrue) {
do1();
} else {
do2();
Now, we look at this line:
KBMOglobalGeneralCancelDispatch._x<0?
KBMOglobalGeneralCancelDispatch._x=0:
KBMOglobalGeneralCancelDispatch._x;
it is same like
if (KBMOglobalGeneralCancelDispatch._x<0) {
KBMOglobalGeneralCancelDispatch._x=0
} else {
KBMOglobalGeneralCancelDispatch._x

A movie clip before the actual DVD menu

Similar Messages

Maybe you are looking for