A networking error has occurred: Cannot open file (-3001)

When I attempt to use Software Update I get the following message: "A networking error has occurred: Cannot open file (-3001)"
I am connected to the Internet, can connect with iDisk no problem. Manual downloading also works.
Any ideas? Do I trash a corrupted file or what?
Many thanks in advance.
John
Message was edited by: [email protected]

I troubleshot this problem with a helpful Apple tech person who provided a workaround:
Establish a second identity. After you log out of your own identity and into the second identity, you can successfully use software update. He had me trash a number of items deep within the system but nothing else worked. I also ran the Utilities program both off the system and the 10.5 disk with no effect.
So far then, the only solution appears to be the second identity route or to manually download and apply updates. Quite a mystery I'd say!
Any ideas out there?

Similar Messages

Safari 5.0.6 is not downloding in my old g4 powerbook it say anetworking error has accurred cannot open file (-3001). but i connect the internet but its not downloding

i can not downlode safari 5.0.6 in my old powerbook g4,need some help its say (-3001)file can not open.

Actually if you look to the right of this page in the "More Like This " section you'll see people reporting a -3001 error message when using Software Update. I think these are quite old discussions but among the solutions are a Permissions Repair or updating through a new user account. It would cost nothing to try.

Error Message when installing updates: "Cannot open file (-3001)"

I have a MacBook3.1. with Mac OS 10.5.7. Three days ago I installed 5 to 6 updates for iTunes, iDVD, AirPort Express, Java, etc. After the installation, I could not access the internet because my AirPort wireless on the Mac was off (non-existent). I could not even scan for my network. I could not access iTunes, in fact when I opened iTunes, the application got stuck and I could not even "force quit" the application. I went to the Apple Store and was told to Re-install the original OS discs (10.5) received with the MacBook, which I did. After the installation things seemed to be back to normal. I was able to access the internet, etc. However, I could not open iTunes because and I paraphrase "the iTunes version that created/supported the application is not.....". OK so I need to update the software. Now, when I tried to update the software with the newly installed "re-install" 10.5 OS I received the following message:
"A networking error has occurred: Cannot open file (-3001). Make sure you can connect to the Internet, then try again."
Meanwhile, I was searching the internet googling the above message. So internet access was not the issue. I decided to create a "test" admin account to see if I could update from another account. Low and behold, I was able to access and update each new software update from the new "test" account and ultimately open iTunes from my personal (main) account.
Very confused and could use some guidance. Any ideas?

Welcome to Apple Discussions:
My general rules:
Never install more than one update at a time - especially those requiring a reboot.
Whenever possible, use the manual updates and for OS updates, always use the manual combo update.
If a problem does occur, reinstall any "bad" updates with manual updates. Yes, they can be reapplied.
Again, one at a time.

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only. "

After downloading Maverick I cannot save or email scans from my HP L7780. I receive error message "An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.

Read the user manual that came w/the scanner and/or contact HP Support.
http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
http://support.apple.com/kb/HT3669 Printer and scanner software available for download
A scanner driver you may wish to consider: VueScan Scanner Software

FRM-92102: A network error has occurred. on Windows 2003 Server

I had installed Oracle APPS R12 on Windows 2003 server. I use the same (System) as Server and Client. When trying to open the Forms I am thrown with below error:
FRM-92102: A network error has occurred.
The Forms Client has attempted to reestablish its connection to the Server 5
time(s) without success.
Please check the network connection and try again later.
I googled, searched this forum for solution. But these didnt work out. So please help me to get this fixed.

I had installed Oracle APPS R12 on Windows 2003 server. I use the same (System) as Server and Client. When trying to open the Forms I am thrown with below error:
FRM-92102: A network error has occurred.
The Forms Client has attempted to reestablish its connection to the Server 5
time(s) without success.
Please check the network connection and try again later.Please check the application.log file for details about the error.
Please see tjese docs.
R12: "FRM-92101: There Was a Failure in the Forms Server During Startup" Error When Loading Forms [ID 1103744.1]
Recommended Browsers for Oracle E-Business Suite Release 12 [ID 389422.1]
Thanks,
Hussein

Error 6 occured at open file+.vi:open file

Hi
Iam using lab view 7.1 licensed version.But when i create a stand alone application and install it in a 4gb touchpanel(ADVANTECH TPC 660G B1-E).iTS WORKING PERFECTLY FOR SOME TIME.But after some time i get an error (error 6 occured at open file+.vipen file).Iam attaching the snapshot
plz help me out
ekanth
Attachments:
untitled.JPG ‏55 KB

This indicates a problem with your code. Since you haven't shown us any code we can' tell you what the problem is. Are you trying to open a file that's open by another application? Are you trying to open a file that's on a network, and the network is temporarily unavailable? You should know what file it's trying to open - after all, you wrote the app, right?

Stand alone application(.exe) : Error 7 occurred at Open File+.vi: Open File (error: L'erreur 7 s'est produite à : Open File+.vi:Open File)

Dear group members - as i am trying to build a stand alone application , i ran into this problem : "Error 7 occurred at Open File+.vi: Open File" (L'erreur 7 s'est produite à : Open File+.vipen File)
when i select continue i get this error message: "Error 7 occurred at open/create/replace file in Write spreadsheet string.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi"" ( "L'erreur 7 s'est produite à : Ouvrir/Créer/Remplacer un fichier dans Write Spreadsheet String.vi->Write To Spreadsheet File (I64).vi->Mono Com Write ini.vi->mainVI2.vi" )
i didn't get what's the problem with this vi, i have no problem running my VIs
Can any one here help me out ?
here is the project :

Neither can I. When I opened your Project, there were no VIs present on the top level. The Build Spec refers to a Mainv12, which I finally found buried in the folder Interface 2, but when I tried to open it, there were multiple missing VIs. I notice you have an Interface 2.llb -- is this the same as the VIs in the Interface 2 folder? If so, try getting rid of the .llb (at least for the purpose of sharing your code in the Forum) and re-post your code. As it stands, when I open your Project, virtually every entry is marked "Warning: has been deleted, etc." The fact that so much is "missing" means that I can't easily see/understand MainV12, hence can't guess where the File Not Found error is arising. Sorry.
Bob Schor

A critical program error has occured while opening workbook

Dear friends,
A critical error has occured while opening workbook. The issue is that the same workbook is opening in some one machine but not in others.The following Dialog box is poping out when tried to open workbook:
"A critical program error has occured.The Program will now terminate.Please refer to trace for further information."
However,i did the full updation of service pack3 of MS Excel 2003 on my machine and the same version as on that particular machine(on which workbook is opening). The problem is still there.Please provide some solution.
Thankx a lot in advance!!!
regards,
Sandeep Singla

The machine where the workbook is opening has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.7.1038
Build : 967944
Patch Level : 7
and the machine where the critical program error is coming has a GUI :-
Release : "710 Final Release"
File Version : 7100.2.8.1039
Build : 983952
Patch Level : 8
The Excel 2003 are similar in both the machines as the service pack3 has been installed in the machine where workbook was not opening.
Any help will be appreciated.
Thanks and Regards,
Sandeep Singla

An error has occurred saving the file because it could not be written to.

An error has occurred saving the file because it could not be written to. Check the properties for the file to make sure it is not read-only.
This error message comes up every time I try to save a scanned document to my mac 10.9 .4 . I have reset the software for my HP C5180.All in one. I have not had te problem before, just recently following some upgrades ....any suggestions how to fix this, on reading forums it seems its a common problem.. not good .
Thanks

Hi @annie59,
Welcome to the HP Forums!
I understand that you cannot scan with your HP Photosmart c5180 on Mac 10.9.4. I am happy to help you with this scanning issue!
Please try the following:
Reset the printing system. OS X Mavericks: Reset the printing system.
Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions.
See this installation guide. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
See this post, Re: iMac OS X 10.9.3 Scan to iMac Driver for HP OfficeJet Pro 8500A A910a does not seem to exist, by my colleague @Sunshyn2005.
Hope this information helps, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Error message "A I/0-error has occured in the file" (free translated from Swedish). What to do?

Hello!
I keep getting the error message "A I/O-error has occured in the file" (free translated from Swedish) when I try to save changes to a .ai-file in Illustrator. I have never experienced that before. Does anyone have any idea what the problem is? Greatful for a quick answer, since I can't get any work done =/ Thank you in advance!

alu,
If it is a specific file, one thing often tried first is to create a new document and File>Place the corrupted one to see how much may be rescued that way (remember to tick Paste remembers Layers in the Layer palette flyout/dropdown first, and to untick it afterwards).
Here is a website where you can see whether it can rescue the file, and if it can, you may pay for a subscription to have it done,
http://www.recoverytoolbox.com/buy_illustrator.html
and another similar website,
http://markzware.com/adobe-software/fix-illustrator-file-unknown-error-occurred-pdf2dtp-fi le-recovery/
As far as I remember, the former is for Win and the latter for Mac.
Here are a few pages about struggling with it yourself:
http://daxxter.wordpress.com/2009/04/16/how-to-recover-a-corrupted-illustrator-ai-file/
http://helpx.adobe.com/illustrator/kb/troubleshoot-damaged-illustrator-files.html
http://kb2.adobe.com/cps/500/cpsid_50032.html
http://kb2.adobe.com/cps/500/cpsid_50031.html
http://helpx.adobe.com/illustrator/kb/enable-content-recovery-mode-illustrator.html
If it is not just a certain file, you may have a look at the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

Publishing Universal App - An unexpected network error has occurred

Hello,
Each time that we tried to "Associate App with Store" or Create App package" via Visual Studio 2013 to publish our Windows Phone 8.1 Universal app, we have the error "An unexpected network error has occurred. the app list cannot be refreshed.
Please retry by pressing the refresh button".
Our account has more 100 WP apps, and we saw that it could be the problem?
With Silverlight app, it was easy to generate a XAP. But now with Universal Apps, due to this issue, we are blocking! Please Microsoft, can you correct this bug?
Thanks
ClevLab (www.clevlab.com)

Hello Sroye.
I have been struckling with the same problem. Copying large data amounts between my MacBook and my Airdisk works perfectly (though slowly).
But copying data amounts larger than about 300MB from my XP to my airdisk suddenly stops with the error you get. Hereafter I cannot access the airdisk until I have re-started both my AEBS and my 500GB LaCie HFS+ formatted disk drive.
I use the new 7.1.1 firmware version in my AEBS.
Have you solved your problem?
Kind regards Thomas.

A network error has occured. This computer's Internet connection appears to

Hi all
I keep getting this message evertime I try to open Quicktime but I dont understand it! any ideas?!

To Apple Discussions!
The following also applies to the original poster Richard Woodger:
What type of internet connection do you have? Unknown if that could be part of the problem especially if you both have dial-up service.
Also, which browser & version were you both using? If the browser was not the latest version, update it, repair permissions & see if that stops the error.
I couldn't find anything to directly connect this error to QuickTime.
See the following Knowledge Base Articles. They may be of some help:
http://docs.info.apple.com/article.html?artnum=106796 Mac OS X: Connect to the Internet, troubleshoot your Internet connection, and set up a small network
http://docs.info.apple.com/article.html?artnum=106749 Mac OS X: Troubleshooting a cable modem, DSL, or LAN Internet connection
http://docs.info.apple.com/article.html?artnum=30995 QuickTime Streaming Server: General Information
Until others chime in with troubleshooting solutions, you both may want to research this error on your own by going to the top left of this site & click on Advance Search inside the purple menu bar. In the search field of Advanced Search type in the error code A network error has occured. This computer's Internet connection appears to be online.
Good luck!

Admin gets the following message while trying to update software: None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. Any suggestions?

I'm the Adnin. just recently I tried to update system software (Lion OS). The following message was returned. None of the selected updates could be saved. A network error has occurred. Check your Internet connection, and then try again. but I have internet access )email, Safari, etc.). Any idea of what is happenening?

The error may be at Apple's end rather than yours. It could also be due to corrupted files on your computer. Try deleting the following:
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Caches/com.apple.SoftwareUpdate/
/Library/Preferences/com.apple.SoftwareUpdate.plist
Restart your computer.

FRM-92102 - A network error has occured

Hi,
I'm deploying a forms 9i application on the intranet. I'm using Oracle Application Server Forms and Reports Services 9.0.4 under Red Hat Linux AS 4.0, along with an Oracle 9i Database on another server (actually multiple databases, used for benchmarking). Every time I connect from a remote PC on the network under Windows XP Pro or Windows 2003 Server, after a few seconds or minutes, I get the error message: FRM-92102 - A network error has occured after ...
I did a lot of research on the internet. I'm using Internet Explorer 6.0, so I tried from Netscape 8.0 and Netscape 7.0, but I got the same problem. I changed the networkRetries in the formsweb.cfg to 5, but it didn't change anything.
On the other hand, I installed the Oracle Application Server Forms and Reports 9.0.4 on a Windows platform and it works perfectly, with no network error problems.
Also note that the Forms 9i application uses Webutil.
So, right now, I'm a bit lost. Can anyone please tell me if there is some parameter I have to set, or something I should do to make it work?
Thanks a lot

First, when the network error occurred, I ran the url on the site server. It gave me the following page:
Oracle Application Server 10g Forms Services
The Forms Listener servlet is up and running
as for the modified files during the last minute, here is what I got:
[oracle@bmlps-appser bin]$ find /u01 -cmin -1
/u01/app/oracle/product/9.0.4/reports/logs/rep_bmlps-appser
/u01/app/oracle/product/9.0.4/reports/logs/rep_bmlps-appser/rwserver.log
/u01/app/oracle/product/9.0.4/reports/server
/u01/app/oracle/product/9.0.4/reports/server/rep_bmlps-appser.dat
/u01/app/oracle/product/9.0.4/sysman/log/em-web-access.log
/u01/app/oracle/product/9.0.4/sysman/emd/state
/u01/app/oracle/product/9.0.4/sysman/emd/state/0013.dlt
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/server.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/rmi.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/default-web-access.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/jms.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/log/OC4J_BI_Forms_default_island_1/global-application.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/application-deployments/reports/OC4J_BI_Forms_default_island_1/application.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/application-deployments/forms90app/OC4J_BI_Forms_default_island_1/application.log
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/persistence/OC4J_BI_Forms_default_island_1
/u01/app/oracle/product/9.0.4/j2ee/OC4J_BI_Forms/persistence/OC4J_BI_Forms_default_island_1/transaction.state
/u01/app/oracle/product/9.0.4/j2ee/home/log/home_default_island_1/default-web-access.log
/u01/app/oracle/product/9.0.4/webcache/logs/access_log
/u01/app/oracle/product/9.0.4/opmn/logs/states
/u01/app/oracle/product/9.0.4/opmn/logs/states/p1151074367
/u01/app/oracle/product/9.0.4/opmn/logs/states/.opmndat
/u01/app/oracle/product/9.0.4/opmn/logs/OC4J~OC4J_BI_Forms~default_island~1
/u01/app/oracle/product/9.0.4/opmn/logs/ipm.log
/u01/app/oracle/product/9.0.4/Apache/Apache/logs/access_log.1125489600
/u01/app/oracle/product/9.0.4/Apache/Apache/logs/dms_metrics.28383.shm.mem
/u01/app/oracle/product/9.0.4/Apache/Apache/logs/error_log.1125489600
Thanks

Error 7 occurred at Open File+.vi:Open File,NI-488: Nonexistent GPIB interface

I did some clean-up of my computer and have been having issues ever since.
I'm not the one that did the programming; the person who did is long gone.
The VI loads fine but when I hit run I get:
Error 7 occurred at Open File+.vipen File
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
All the necessary VIs are available and I've tried changing all the file calls in the VIs to the new locations but the error is the same.
Any suggestions?
Thanks.

Error 7 is a generic file not found. If it is happening after cleaning up files, more than likely you moved some subVIs called in a main VI to a new location on your computer. If all the VIs are in a project, a possible solution would be to remove the vis in the project directory and add them back to the project as they may be pointing to a previous location where the files were once stored. Perhaps this is what Anon123123123 meant by "linking". Hope this helps.
Regards,
Isaac S.
Regards,
Isaac S.
Applications Engineer
National Instruments

A networking error has occurred: Cannot open file (-3001)

Similar Messages

Maybe you are looking for