A new Daniel_K X-Fi Series Support Pack?

Since Daniel has reworked the Audigy and other packs... will a new one for X-Fis come?

Hi Daniel, thanks again for your work. one Question I have a SB 550 and I miss this Card in the description of your pack. and indeed i have problems with the Driver and Windows 8.1. / 10
If installed, the sound of Mp3 with CMSS-3D in Sourround Mode on is fantastic and everything works like a charm for several hours.
Than the channels are changing the Speaker and the sound begins to scratch. It s terrible now and it is inpossible to hear any Music with CMSS-3D in Sourround Mode on. If I try the speaker setup in windows or the creative speaker setup and I click on rear left, I hear the sound of the setup on rear left and rear right at the same time even though I shoul here the sound only from the speaker I clicked on. If so, a fix with a restart is not guaranteed.
It seems to help to use parts of a driver of one of your older packs.
I don`t know, if this problem consists other X-Fis too because I only have the SB550 or is this the reason of the missing of X-Fi Elite Pro in your description?
Thanks again. I use your Software for so many years now. :-)
Edit:
if you should have a similar error and you have an ATI Graphics Card, please try the following. Open the Event Viewer and look for ACEEventLogSource in Information . If there are hundreds of messages, open the task manager and disable Catalyst Control Center Launch in Startup. In most cases, the CCC is no longer needed, once it is set up and you don`t overclock the card. Restart. For me it solved the problems and the Sound is great with my Linn Majik 6 channels power amplifier. The CCC error is quite common. I do not know if it helps to disable the CCC even if you have any error messages. Give it a try :-)

Similar Messages

SB Audigy Series Support Pack 3.1 (OUTDATED)

<p align="center">[color="#ff0000"]This software/driver pack is unofficial, not supported by Creative Labs.
<p align="center">[color="#ff0000"]Use it at your own risk.
Supports any model of the following?Sound Blaster cards (based on Emu0kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
For?Audigy SE/LS/Value and Li've! 24-bit cards, <a target="_self" rel="nofollow" href="http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=4440"]click here for a compatible version[/url].
Operating systems supported: 32-bit and 64-bit editions of Windows 7?RTM
?Vista?SP2 / XP SP3
Included in the pack:?
- Audigy series driver 2.8.00.8 (latest beta)
- ALchemy .30.00
- Audio Console .32.02
- DDL and DTS Connect License Activation 2.00.03 (*)
- Dolby Digital Li've Pack 3.00.03 (*)
- DTS Connect Pack .03.04 (*)
- EAX Console 3.00.56 (Windows XP only)
- Graphic Equalizer 2.00.65
- MediaSource DVD-Audio Player 2.00.78
- SoundFont Bank Manager 3.2.00
- Speaker Settings 2.00.60
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
Does this driver improve sound quality or performance? Are there any tweaks?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and?sound?fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
[img"]http://brztech3.googlepages.com/audcondts.png" height="530" alt="Audio Console: DTS Interacti've in Encoder tab[/img] width="44">[img"]http://brztech3.googlepages.com/spkmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for Speakers[/img] width="44">[img"]http://brztech3.googlepages.com/spdifmshte.png" height="46" alt="Microsoft Audio Home Theater Effects for S/PDIF Out[/img] width="44">
Fixes and improvements:
- Enables support for?WASAPI exclusi've-mode event-dri'ven playback, seems to be working just fine
- Fixes the enhancements errors in Windows?mixer and Windows Media Player.
- Adds Microsoft Audio Home Theather Effects for both Speakers and S/PDIF Out endpoints.
- Includes Encoder Switcher to enable DTS Interacti've on Audigy cards.
- Fixes the Audio Console "Internal application error" when enabling the DDL Encoder on localized installs.
- Updates Audio Console to display DTS Interacti've in the Encoder tab when Encoder switcher is used.
- Workarounds a bug that?unexpectedly resets the?speaker configuration.
- Prevents an issue during installation on Windows 7/Vista that may result in low volume when certain enhancements are enabled.
- Implements Hardware CMSS Headphone by using a workaround.
- Updates all InstallShield setup scripts to support Windows 7.
- Fixes installation INI to properly install applications depending on the detected OS.
- Removes COM workaround for Equalizer, fixed by Creative.
- Adds workaround to a memory corruption issue preventing Equalizer from starting on Windows 7/Vista.
- Updates shared modules, responsi'veness on certain applications is improved.
- Enables CMSS2 and Stereo Surround.
- Fixes 32-bit ASIO not working on Windows 7 x64.
- Fixes Encoder not available on Windows 7 x64 (related to fix above).
- Modifies default format on Windows 7 / Vista to 24-bit, 48kHz.
- Properly adds support for 64-bit OpenAL and 64-bit ASIO.
- Sets default speaker setting to 5. to properly reset configs to their defaults during install (fixes Bass and Treble leves not set to 50% on Windows 7 / Vista).
Undocumented fixes by Creative (not listed in the release notes):
- Fixes the Enable Dolby Digital Li've checkbox not staying checked when Audio Console is closed.
- Fixes Equalizer Out of Memory error.
- Fixes Equalizer settings being lost on Windows 7 / Vista when speaker configuration is changed.
- Fixes low volume on Windows 7 / Vista when default format is set to anything higher than 6-bit, 48kHz.
- Fixes MIDI instruments in Melodic Pool not playing when speaker setting is higher than 2. speakers.
- Restores missing Microphone option in Surround Mixer (documented).
- Fixes Microphone mute, volume and +20db boost controls.
[size="3" color="#000000">?
[size="3" color="#000000">Release Notes:
Windows Security warning during driver installation
When prompted with: "Windows can't verify the publisher of this driver software", choose "Install this driver software anyway".
OpenAL 2D benchmark in RightMark 3DSound crashes your system
Due to a driver bug, your system will crash if you run the OpenAL 2D benchmark using 63 buffers. No problem With 62 or fewer buffers. OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D) - ctoss2k.sys
Microphone issues on Windows 7/Vista 64-bit (x64) with 4GB?of RAM or more
Audigy driver does not support 64-bit addressing, resulting in random issues with the Microphone (static, robotic or distorted voice, white noise).
Workarounds:
- install the 32-bit (x86) version of Windows
- limit the RAM available to Windows to less than 4GB
- enable Memore Hole in BIOS Setup, if?your motherboard supports the setting
6. Speakers?incorrectly available on Windows 7 64-bit (x64)
Due to a version detection bug in the 64-bit drivers, the FilterSpeakerMode registry setting is ignored, exposing the 6. speakers setting on Windows 7 x64 edition.
Do not choose that mode as it causes sync issues with Windows mixer.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows 7 / Vista / XP
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows 7 / Vista (requires Service Pack )
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Advanced EQ and Special FX not available on Windows 7 / Vista
These presets don't work on Windows 7 / Vista.
There is no sound in games with OpenAL support on Windows XP
Disable Advanced EQ and Special FX selecting "No effect" before running the game or program.
Equalizer settings are lost
When you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are lost.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are reset when speaker configuration is changed
Bass and treble settings are reset when speaker configuration is changed.
DTS Encoder Switcher
The Encoder Switcher can be found in the \EncSwitcher folder in the path where you extracted the Support Pack.
Thoroughly read the ReadMe.txt file included before using the provided?utilities.
Hardware CMSS Headphone
To use the hardware CMSS you need to select "Disable all enhancements" in the "Enhancements" tab on:
Playback Devices -> Speaker Properties
Now check the Speaker configuration in "Playback devices".
If it is Stereo, run Audio Console and change it to 4., 5. or 7. and only after that change it to Headphones.
This procedure ensures that CMSS() will work after a Windows restart, otherwise only CMSS2 will work.
Microsoft Audio Home Theater Effects
This driver adds the following audio effects, which are available depending on the current speaker configuration:
- Bass Management
- Speaker Fill
- Room Correction
- Loudness Equalization
- Bass Boost
- Virtual Surround
- Low Frequency Protection
Some effects are also available for the "SPDIF Out" device.
Some Microsoft effects have priority over Creative CMSS effects and will disable the later.
Windows MIDI Device Configuration Utility
Use this utility to change the MIDI playback device for 32-bit and 64-bit applications.
Download:
New version available here:
http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&thread.id=46907?
All files are property of Creative Technology Ltd, unless otherwise noted.

IRe: SB Audigy Series Support Pack 3.0 + DTS Encoder Switcher (08/28/2009).
blunden wrote:
EddieObscurant: 4. works fine for me in AC3. I use AC3filter though and it has it's own speaker settings. Perhaps that helps until the next release.
daniel_k: I uploaded it to 4shared.com and MediaFire for you since I don't really like Rapidshare. I hope you don't mind.
http://www.4shared.com/file/302793/e9678376/Audigy_SupportPack_3_0.html
http://www.mediafire.com/download.php?rjmznqa2oy
Sure I don't mind, thanks for helping, but I've?just uploaded an updated package, version 3..
Fixes an issue that prevents Speaker Fill from working.
There is also a hotfix in the main post, so those who have already installed Support Pack 3.0 don't need to reinstall.

SB X-Fi Series Support Pack 2.0 (05/15/2009)

This software/driver pack is unofficial, not supported by Creative Labs
and is provided as is, without any warranties.
Sound Blaster X-Fi series Support Pack 2.0
Updated version:
http://forums.creative.com/showthread.php?t=587995

jmacguire wrote:
I really wish I had your abilities. You must be amazingly intelligent and patient. Cheers to you and your hard work.
jmacguire
Don't say that, I'm not that intelligent. Patient, yes, for sure.
That's too bad this takes me nowhere.
But.. who knows what might be coming.
Thanks for your continuous support!

SB Audigy Series Support Pack 5.3 (02/24/2015)

This software/driver pack is unofficial, not supported by Creative Labs.
Use it at your own risk.
Supports any model of the following Sound Blaster cards (based on Emu10kx DSP):
- Audigy
- Audigy 2
- Audigy 2 ZS
- Audigy 4
- Audigy 5/RX
For Audigy SE/LS/Value and Live! 24-bit cards, click here for a compatible version.
Operating systems supported:
32-bit and 64-bit editions of Windows 10 / 8.1 / 8 / 7 SP1 / Vista SP2 / XP SP3
Included in the pack:
- Audigy series driver 3.01.0039 (Windows Vista or later) (**)
- Audigy series driver 2.09.0016 (Windows XP)
- ALchemy 1.45.03
- Audio Console 1.41.00
- DDL and DTS Connect License Activation 1.00.04 (*)
- Dolby Digital Live Pack 3.03.08 (*)
- EAX Console 3.00.60 (Windows Vista or later)
- EAX Console 3.00.59 (Windows XP only)
- Feature Mode Selection Utility 2.10.07
- Graphic Equalizer 2.10.01
- MediaSource DVD-Audio Player 2.00.78 (***)
- SoundFont Bank Manager 3.21.02
- Speaker Calibrator 1.60.14 (Windows XP only)
- Speaker Settings 2.10.05 (Windows Vista or later)
- Speaker Settings 2.10.04 (Windows XP only)
- Surround Mixer 4.00.76 (Windows XP only)
- THX Setup Console 2.20.08 (Windows XP only)
(*) Purchase and activation required, more info at http://buy.soundblaster.com.
(**) - For Audigy 5/RX (SB1550) and Audigy 4 Series II (SB0612) this driver also supports Windows XP.
(***) - Requires Audigy 2, Audigy 2 ZS ou Audigy 4
Does this driver improve sound quality or performance Are there any tweaks ?
No, this driver does not improve sound quality nor increase performance.
No, there are no tweaks.
If someone states that its driver improves sound quality and performance, you are being fooled, cheated.
It is even worse that the so called tweaks come from a person who is not EVEN technically acknowledged, does NOT know anything about Windows internals, software engineering and sound fidelity that all audiophiles always look for.
If you "feel" the sound better, that is the infamous placebo effect and there is no real proof that any tweaks work.
In fact, I have yet to see a driver that states in its release notes that it improves sound quality.
I've disassembled about every single .SYS driver, .DLL libraries and .EXE executables and found nothing.
There are some undocumented registry values, but nothing related to sound quality or performance.
Would the so called tweaks even exist, they would be in my Support Packs, you can bet that.
Fixes and improvements:
- Fixed Audigy 5/RX support.
- Readded "EndPoint Utility" to enable the use of other digital devices to output Dolby Digital Live encoded audio.
- Fixed driver installation issues on Windows 10.
- Fixed Audigy "1" or Audigy 2 mute issue.
- Audigy RX is now fully supported.
- EAX Console now works on Windows Vista or later.
- Karaoke effects now work properly on Windows Vista or later, just use EAX Console to enable them. Effects will only be applied to the Microphone input.
- Sound Blaster Audigy Control Panel now available for all cards, but it lacks many settings available on Audio Console, so use the later.
- Added instructions on how to install the Gameport.
- Fixed missing speaker settings strings on Windows XP when DDL is enabled.
- Improved driver installation, less confirmation prompts.
- Improved setup procedure and scripts.
- Removed Encode switcher for now, only DDL is available.
- Installation now customizable, select what you want to install.
- New integrated Post Driver Install Helper tweaks the driver without tampering certificate.
- CMSS2 is now available.
- OpenAL 64-bit support.
- Dolby Digital Live now works on Windows 8.1 (update 1). Creative Audio Service was not being installed on that OS.
- Special FX, Advanced EQ, Studio and Custom presets now available on Windows Vista or later.
- Audio Console does not crash anymore on non-English localized installs. Localized resources for Online Karaoke tab were missing; added mostly localized Korean and Chinese (Traditional) resources.
- Online Karaoke page is available for all Audigy cards on Windows Vista or later; this is NOT a new feature, but an easier way to configure the Microphone.
- EAX Settings for Windows Vista or later includes EAX Studio, a fancy version of EAX Control Panel, no changes in functionality, except the Test button now works.
- Added fully localized Korean and Chinese (Traditional) resources for EAX Studio, which were missing.
Undocumented fixes by Creative (not listed in the release notes):
- Headphone mode now sticks and does not revert automatically to Speakers mode on Windows Vista or later.
- Special FX, Advanced EQ and Studio presets were not working on Windows Vista or later.
Release Notes:
IMPORTANT: Driver uninstall on Windows Vista or later
The included driver for Windows Vista or later has a bug that causes a stop (blue screen) error when unloaded by disabling the Audigy or uninstalling the driver.
To workaround this issue, run the KillDrv.exe utility included and restart when asked to do so. Proceed normally and uninstall all the software or only the driver.
If you have previously installed the Audigy 5/RX driver, you MUST run this utility.
As the KillDrv verify the driver version installed, running it won't do any harm, even if the driver version is not affected.
HOW TO INSTALL THE GAMEPORT DRIVER
You can find a Gameport\ReadMe.htm file in the folder where you unpacked the Support Pack.
Just follow the steps shown in the screenshots.
WINDOWS 8.1 OR LATER DOES NOT SAVE SETTINGS
- Configure all settings and shutdown. Your settings will be saved.
- This does not work if you disable Fast startup permanently or temporarily (by holding the Shift key while shutting down).
- On Windows 10 you need to run the application with Administrator privileges (right-click and choose Run as Administrator). This is valid for all applications used to configure the card.
OpenAL 2D benchmark in RightMark 3DSound crashes your system
The included driver for Windows Vista or later has a bug that crashes your system if you run the OpenAL 2D benchmark using 63 buffers.
No problem With 62 or fewer buffers.
OpenAL 3D and OpenAL 3D + EAX benchmarks are not affected.
Details: DRIVER_IRQL_NOT_LESS_OR_EQUAL (0x000000D1) - ctoss2k.sys
There is no DirectSound hardware acceleration on Windows XP 64-bit (x64) with 4GB RAM or more
The Audigy driver does not support 64-bit addressing, disabling the DirectSound hardware acceleration and causing multichannel sound to be played only in the stereo channels (front left/right).
Workarounds:
- install the 32-bit (x86) version of Windows XP.
- limit to less than 4GB the amount of RAM available to Windows.
- enable the "Memory Hole" setting in the BIOS Setup, if your motherboard supports it.
- install and use Creative ALchemy to convert the DirectSound API calls into OpenAL, which is not affected by this issue.
Karaoke effects make the audio play in mono
You can avoid this issue by using EAX Console to enable Karaoke effects. Audio Console is affected by the issue.
Optionally, follow the steps below.
Open EAX Settings, select a Karaoke effect, then click the Edit button.
Click on the Source (Wave) tab and change the Original sound to 100% and Pitch Shift to 0%. Click the Save environment button.
Repeat the steps for all Karaoke effects.
These changes will be valid only for the current speaker configuration. If desired, repeat the same process for each speaker configuration.
MediaSource DVD-Audio Player system requirements
- 32-bit edition of Windows XP or later
- any Audigy 2, Audigy 2 ZS or Audigy 4 card
Built-in Decoder on Windows Vista or later
To use the built-in decoder, make sure it is enabled in Audio Console.
Select "SPDIF Out (Creative SB Audigy (WDM))" as the output device of your player and then configure the AC3/DTS filter to send the stream through SPDIF.
When you restart your computer, the Tone settings (Bass and Treble) are not applied.
Just readjust one of the controls one time per boot.
Equalizer and EAX effects are not available when using OpenAL or ALchemy
Only Tone (Bass and Treble) and CMSS 3D (CMSS, CMSS2 and Stereo Surround) features are available.
There is no sound in games with OpenAL support
Disable Advanced EQ and Special FX by selecting "No effect" before running the game or program.
Equalizer settings are not applied after using OpenAL or ALchemy
After you run a game with OpenAL support or using Creative ALchemy, the Equalizer settings are applied.
Just run Equalizer and the saved setting is loaded automatically.
Tone settings are lost when speaker configuration is changed
Bass and treble settings reset to their default values when speaker configuration is changed.
Download:
Filename: Audigy_SupportPack_5_3.exe
File size: 120 MB
CRC32 hash: 76110093
SHA- hash: 1001EB673EAF532EA10B2C986F1F4046D52F6771
Mirrors: Google Drive
All files are property of Creative Technology Ltd, unless otherwise noted.

Originally Posted by Dave_
Please help me daniel_K. All I want to do is send 5.1 sound to my Sony amp (SRT-DH520). I have purchased a new SB Audigy 5/Rx [CFC0] and when I install from your pack everything looks great until I toggle the "Enable Dolby Digital Live". Then I get no sound output at all. And when I try to test the signal through the audio settigs it says "The device is being used by another application. Please close any devices that are playing audio to this device". I cant think of any other device running. When I untick the Enable Dolby Digital Live I can get stereo sound again. The DDL is authenticated. The cable is working. The amp is fine. I neeeeed help....
Unfortunately I don't have a sample card to test personally and don't know anyone with an Audigy 5/RX.
Anyway, I have a suggestion.
Run EndPtUtl.exe found in the Audio Console installation folder.
If the issue still persists, try to use the Digital Output (Coaxial/Optical) of another device, provided that you have any on your computer.
EndPtUtl.exe enables the use of any device for outputting encoded audio.

I CAN'T INSTALL SB X-Fi Series Support Pack 2.0,PLEASE HELP

Hi?
I? can't install this drivers... I have this error "Driver version is not found". I have X-fi [color="#000000"]XtremeMusic and my OS is Window Vista
Please Help

jmacguire wrote:
I really wish I had your abilities. You must be amazingly intelligent and patient. Cheers to you and your hard work.
jmacguire
Don't say that, I'm not that intelligent. Patient, yes, for sure.
That's too bad this takes me nowhere.
But.. who knows what might be coming.
Thanks for your continuous support!

Landscape Verification - new support pack

Hi,
Where can I download SP for ST-LV 100?
When I look into:
Support Packages and Patches - Entry by Application Group" SAP Technology Components" LV FOR SOLUTION MANAGER" LV 1.0 FOR SOLUTION MANAGER
Support packs for this component is missing.
But in note 1485671 is : Correction delivered in Support Package SAPK-10001INSTLV.

Hello
The support pack is not missing. It has yet to be released.
You are looking at a note that is for ST-LV 100 w/o support pack.
Notes will indicate in which support pack the note correction will be included, as support packages are collections of code corrections, where releases offer new functionality, typically.
When ST-LV 100 SP1 is released, then you would know at a glance that this Note is included in the SP level.
It does not necessarily mean the SP level is released.
The Lanscape Verification tool is a new tool, so all this note is identifying is that it's corrections will be contained in the first Support Package. This tool just recently came out of ramp-up. I would guess the SP1 would be available sometimes in January, but that is just a guess.
Hope this sheds some light.
Regards,
Paul

Support Pack error in SPAM

Hi
I am importing a group of Support Packs into our DEV environment to bring the landscape uptodate, we are running NW04 on Windows 2003 64 bit & SQL Server 2000, I've updated to the latest SPAM and Kernel before the Support Packs.
When importing in SPAM I have used the calculate queue method, all looks ok, when I perform the import, in the phase TEST IMPORT i get the following error for Support Pack SP 12 for EA-FINSERV 5.00 :
<b>
Function MAP2I_BAPICMS_STR_MOV_INS_CRT (CMS_BUSISB104_MAPPI does not fit into the existing function group ((CMS_BUSISB10)</b>
The only option I am given is to repeat the phase, I've repeated this a few times and get the same error on TEST IMPORT. I'm new to NW04 640 BASIS, but I know from running 4.6X system that you can re-run phases and quite often they work correctly 2nd time round, is it worth changing SPAM to not stop on test import errors ? as I know objects required can be in earlier support packs (i'm applying supports pack EA-FINSERV 5.00 08 to 11 as part of the queue before 12 which is giving me the error.
I've checked on OSS and cannot find any notes on this error/support pack.
Thanks.

nope, not tried with ignore test errors yet, wanted to check opinions here to see if thats the next step to try, or if there's anything else I could try ?

Error during application of scm 7.0 support pack

While applying support pack to our SCM 7.0 system (New Installation),
We encountered a SPAM error in xpra_execution phase, due to automatic
termination of job RDDEXECL scheduled by user id DDIC on client 000.
The details of the error are:
Message id: Brain
Message number : 366
Message type: A
Error: Error during SID assignment for characteristic 0REQUID (current
value 2)
We had a look at few notes mentioned by SAP support on 1319241. which
specifies a solution as
u201CIf you encounter the error message above, please run the Elementary
test - Compare Number Range and Maximum SID - for Master Data 0REQUID
in transaction RSRV. When it turns red, the error can be corrected by
pressing the "Correct Error" button.u201D
But we are already getting the light as green in the elementary test
for the Master Data 0REQUID in transaction RSRV, though we still
execute the same and problem is still the same i.e. RDDEXECL
program/job is getting terminated.
Regards
Edited by: pranav kumar on Feb 25, 2011 8:20 AM

Hi SM
Just login to client which has been mentioned in table RSADMINA,then run rsrv you will get error.correct it.then you will be able to import support packs.
Regards
Pranav

Support pack level issue in Standard Finance Program.

Hi Everyone,
                i have an issue which is related to Finance. Actually, Finance People are Using a Standard Report (FS10N) - GL Account Line item display. There,Vendor and Customer Details are not displayed (Customer/Vedor Filed is empty) for the normal GL Account. But for the Reconsalation GL accounts they are able to see.
               For this issue SAP released an SNOTE 1107639 and correction delivered in SAP_APPL support pack 12.And we already applied it in the system and our current SAP_APPL level is 14. Though it is already available why the problem is still persist. Another thing is, for the same issue there is another SNOTE 1034354 which guides to enhancement thro' some BADI work in standard program.
              My question is that if the correction is available in a patch and that is imported as well in to system without any error then it should resolving the problem.but in this case why it does not work out or what could be the reason behind this. As a Basis admin i would like to know.
Thanks&Regards,
Siva

Hi Siva,
Your query is obsolutely acceptable...
After supportpack update some times database will not be synchronised with the new updates.
and more over it seems there is a complete issue with SAP side.... there is only one option in u r hand now just restart the system.but please make sure to take the down time...and check whether the correction is working or not..if not then no luck u need to contact SAP global team and ask them why the corrections are not working properly..
Regards,
Srini

Error importing support pack SAPKH60011 (SAP_APPL)

Dear All,
I am faceing one error when applying support pack SAPKH60011 can not apply showing error " The import was stopped since an error occurred during tha phase IMPORT _PROPER ....". for details i here attached screenshot .
Pls. reply ,
Thanks and regards,
Mayur

Hi Mayur,
You need to check the latest alog, ulog and slog.
Check the main import log SAPI<package name> which should be in usr/sap/trans/log
This will cotnain details of why the import failed.
It it failed due to a deadlock occuring which can occur if someone is using the system while import is occuring, you should restart the database to clear any locks before attmpting the import again.
Another cause of failure during import can be the use of out of date transport tools. Please ensure you are using the latest tp and R3trans available for your release from the service marketplace.
Are you still able to access the system and repeat the import via SPAM?
If every transaction is resulting in a dump and Syntax errors, then please open a message with SAP and provide the alog, ulog and slog along with the main import log and screenshots of the results of
tp showbuffer <sid> pf=<path to transport profile> tag=SPAM
and screenshots of the contents of usr/sap/trans/tmp
for further analysis. Also, please do NOT make any manual commands or changes to the buffer or it can make the situation worse.
Ensure if the import has failed, that the related SAPKK<package name> is renamed / moved from usr/sap/trans/tmp if it is still there from the failed import attempt. If they are still there when you try a new import, the slog will filll with entries of
warning file ...... is already in use, waiting 30 seconds
and the import will not progress.
These files will be created once the new import is started.
When repeating the import, please monitor the SLOG entries and see that usr/sap/trans/log and usr/sap/trans/tmp are being updated regularly, this will allow you to see the progress of the import.
Please update with the contents of SAPI...... if the import still fails.
Best regards,
Paul

Short dumps in every transaction during the Support pack import

I am in the middle of applying support packs SP12 on NetWeaver 7.0. In SPAM, during the import, I received short dumps. I get short dump for all transactions i excute now. I am unable to go to SPAM to continue the SPAM, all I get short dumps. This is our new training system that we are building. I had same issues before, and I got help from SAP for this issue, where they suggested tp command wiht lots of options to run at the OS level. Since I moved company I am not able access the same ticket. Do anyone of you guys know the OS tp command to continue the SPAM import phase?
Please and thanks
Kumar

Hi,
SAP does not recommend to run SP's at OS level. Most of time when u r running SAP_BASIS , u will receive ABAP dumps. then option is to run SP at using tp command & you have to analyze many things before running this command.
<removed_by_moderator>
Please read the Rules of Engagement
Edited by: Juan Reyes on Jul 28, 2008 10:12 AM

Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (s

Hi,
We are moving into the SAP ECC enviroment and need to understand the difference between the 2 Support Packs Release 600, Level 11 (support pack SAPKGPAD11) vs Release 604, Level 03 (support pack SAPK-60403INEAAPPL).
Can anyone give us an indication in terms of functionality what we should be looking out for? During the testing we already came across and issue regarding double invoicing but this was fixed with a OSS note.
From a coding, functionality, intergration and process perspective,how do we know what the differences are? Is there a document that lists these difference as a quick comparison between the two releases.
Thanks in advance

Hi,
There is lot of difference btween 2. ECC System with EHP4 (Release 604 Level 3), ECC package will be on 604 release and level represents the support pack level of 604 release. If your system is on this level then it means that your system is with Enhancement packages but if your ECC components are on release 600 then it is without Enhancement packages.
Enhancement packages has been delivered a lot of new things like New GL etc. More information for what extra features ECC 6.0 with EHP4 has: can be checked on http://service.sap.com/erp-ehp.
To take your system from 600 release to 604 release requires a lot of effort because you have to upgrade your system to bring at this release.
Thanks
Sunny

SAP_HR Support Pack.

Hi Team:
Currently our SAP_HR support pack is SAPKE60017 we are a part of payroll international.
We would seriously planning for the enhancement of the support pack to the latest level:
We need information for the below query to process further on this, anybody faced similar kind of problem can extend their co operation:
1.What would be the Exact impact on other sub modules especially
FICO once HR support pack is enhanced to the latest u2013 ECC
6.0/ECC 6.X including enhancement packs.
2.With the enhancement of latest support pack, what are the
additional features can be availed in other sub modules of HR domain
along with core Payroll.
3. Can the latest support pack be directly implemented or need to be
implemented in a sequence to reach the latest pack.
After SAP big release i. e ECC 6.0, now SAP is releasing
Enhancement packs (Eg :Like ECC 6.2 ).
Now I would like to seek a clarifications that if we would like to
implement latest enhancement pack to fully utilize the
new functionalities/features , do we need to implement first latest support pack
till ECC 6.0 release followed by latest enhancement pack
(ECC 6.2) implementation..
Let me know what are the latest support pack pertaining to ECC 6.0 /
ECC 6.2.need to be implemented in order to have latest SP/EP in the system.
Looking forward for a positive reply.
Regards
Team Member
Edited by: Patlolla Mallikarjun on Aug 11, 2009 11:01 AM

No comments

BI 7.0 and ECC 5.0 support packs

Need help getting started with BI. We are investiagting a new installation of BI 7.0. It will be integrated with an existing ECC 5.0 R/3 system. Does that ECC 5.0 R/3 have to be at a certain support pack or kernel level?
If yes, where do I find out what level?
Thanks in advance, Jay

Hi, ECC 5.0 use Netweaver 2004 and BI7 Netweaver 2004s then :
In ECC 5.0 :
Make user and not supere the 8 chars, password is UPPERCASE not more the 8 Length.
In BI7 :
Make user normaly and remember in BI7 UpperCase and Low Case is used.
Bye.

Support Pack Level Upgrade in BI 7.0

Hi all,
Can anyone let me know what are the possible issues that would occur after upgrading support pack level in BI 7.0.
As far as I know a BI consultant would participate in the upgrade activities like BI objects check, SPAU, query check, etc. Can anyone let me know if there are are any other activities to be performed.
I would appreciate your help.
Thanks,
Sunny.

Hi
There is any customer specific development done by SAP in the previous system. If so, the time to act is just after the pre upgrade study only. The customer would only want to retain the customer specific module developed by SAP. We need to get SAPu2019s intervention in the project before we start the upgrade. SAP would develop certain patches to be run on the previous system to capture all the customer specific development and then they would run some patches on ECC system u2013 this would release the customer specific development in the new system (ECC./BI). This is a very crucial and important check of the step. If not taken care of at the proper time, it might hamper the Customer Specific development on the new system.
It is to be assured that the new system is at the latest stack level for ABAP, XI, BI etc before we start the SPDD and SPAU phase
Only one request is to be made for SPDD. For SPAU too, only one request should be made.
Previous system sandbox should be available for reference during the entire upgrade project and should not be scrapped before the Go Live.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0c9c8be-346f-2a10-2081-cd99177c1fb9
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/304b9de6-f84f-2b10-94af-e5ff7461c18c
http://www.thespot4sap.com/upgrade_guide_v2.pdf
Hope it helps.

A new Daniel_K X-Fi Series Support Pack?

Similar Messages

Maybe you are looking for