"a new version number" for updates

Hi,
in iba2.0 there for updates there is a new field for: "new version number". default is 1.0.
it the support it said the number must be higher than in the store.
actually I don't see a version number at my book page in the store.
however - since it is published yet the version number probably should be 1.1 or 2.0. I don't see any information how the numers have to be increased.
furthermore I did not see any field to explain about "what's new".
After uploading I got a waring: "ITMS-4172..."
http://support.apple.com/kb/HT5213
> but you will need to include text in the "What's New"
Any experience with this issue yet?
Thanks in advance,
Thomas

New info: Updating to iba 2.0 without updating to producer 2.8 is not to recommend:
Book Versioning is available for books constructed in EPUB 3 or using iBooks Author version 2.0.
If your book is in EPUB 3 format or was created using iBooks Author version 2.0, it is important to note you are required to fill out the "What's New in Version" section in the Info pane in iTunes Producer.  If you update your book and you do not fill out this section, your book will not continue through our review process and thus, will not go live on the iBookstore. 
First please ensure you are using the latest version (2.8) of iTunes Producer. You can download this new version in iTunes Connect under the Deliver Your Content module. Once you have launched iTunes Producer version 2.8 and clicked on Look Up Metadata from the “Welcome to iTunes Producer” window,  you will see the "What’s New in Version" section in the Info pane.
If your book is not in EPUB 3 format and was not created using iBooks Author version 2.0, you are not required to fill out the "What's New in Version" section in iTunes Producer.

Similar Messages

  • Need to update app version number for app upgrade

    Hello, I need help with updating of my app (magazine) on App Store. I used different platform for creating digital publications. Now I am starting with DPS. I want to update my app on DPS, but there is problem with version of app. Contemporary version is 3.0.1 and App Builder generates version 1.0.0. Is it possible change version manualy?

    You'll need to call product support and have them increase the version number for you. We have a few product support support people here as well, I'll change the title of your post to be a little more obvious and hopefully they'll see it.
    Neil

  • Acrobat Version Type And Version Number, For Creative Suite 5 (5.0) / CS5 For Windows

    I would like to know the version type and pricise version number for Acrobat that is supplied with Creative Suite 5 (5.0) for Windows Retail Version.  (This is the default version number, before any updates) :
    To summarise:
    For the product:
    Platform: Windows
    Suite: Creative Suite 5 (CS5) / 5.0
    Distribution: Retail
    Application: Acrobat
    I require:
    Version Type: Standard / Pro / Extended
    Version Number (Precise): 9.0 / 9.3 / 9.3.2 / (or other)
    Disc's Volume Label: (As shown in Windows Explorer)
    Ideally this would be found by looking at Acrobat's HELP > ABOUT menu option. (From a Windows installtion of CS5, that has NOT been updated), and not just looking at what is printed on the disc label.
    More replies of the above information, will confirm any information provided in replies.

    Hello
    there are two ways i can suggest:
    First your own account: https://www.adobe.com/account.html and
    Second the general informations there: http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    Helpful woud be http://helpx.adobe.com/contact.html
    And what concerns Amazon: this "serial number" obtained from Amazon is not a serial number, only a code with which you can request a serial number from Adobe. Here you have to go through "Adobe Store", and look for the button "Serial Number Request". Fill in the form and, after a while you will get a "real" serial number.
    Hans-Günter

  • Adobe creative cloud is asking for a serial number for updates - where do I get this from?

    Adobe Creative cloud is asking for a serial number for updates - where do I get this from
    we have recently Bought 5 x 1 year licences and been using this a month
    Michael

    Hi Mick,
    Please refer to the below link.
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
    Thanks

  • The same Object Version Number for the same person id multiple times

    Hello all,
    I am currently facing an issue with HRMS tables and the object version number for employees. I am trying to write a report but due to the same object version number for the same person appearing in several row i am getting duplicate information. For example,
    person id 91 object version number 32 is on 4 rows and i have no idea why...help please guys, I'm at a lost so far 50 people are facing the same issue.

    Hi Baal666bobo,
    The person table is date-tracked, so the PK has effective start and end dates as well.
    Get the correct record with sysdate(or any particular date) and then check the OVN.
    Cheers,
    Vignesh

  • Is the new model number for iPad MC706B? What was the model number for iPad 2?

    Is the new model number for ipad MC706B? What was the model number for ipad 2?

    iPad 2 Model No: A1395, A1396, A1397
    iPad 3 Model No: A1403, A1430, A1416,
    iPad 4(current model) Model No: A1458, A1459, A1460
    You can learn about serial numbers, model no's about iPad, iPhone, iPod and Mac from: http://www.everymac.com/ultimate-mac-lookup/

  • How to delete iPhone camera roll's photos in new version Photos for Mac

    Hi,
    Before upgrade to new version Photos for Mac. I was using iPhoto + Photo Stream to manage all the photos took from my iPhone.
    Photo Stream will upload all new photos to iPhoto; when I connect iPhone to my mac, I can use iPhoto to delete my iPhone's camera roll's photos to clear the storage space.
    After I upgraded to Photos; the Photo Stream still running well, all new photos also upload to Photos' library, however, when I connect iPhone to my mac.
    Photos doesn't offer me any method to delete my iPhone camera roll's photos.
    What I can find is "Import Selected" or "Import All" and "Delete items after import" these functions are doesn't help.
    Because, all the photos are already imported by Photo Stream, when I click "Import All", all the imported photos will "RE-IMPORT" again and the photos will duplicate in my library.
    This is also a BUGS in Photos because in old version iPhoto when I import a photo which has already imported before, the software will pop-up a Dialogue Box to ask me options to choose between "Skip" or "Overwrite" or "Duplicate".
    Do anyone know how to delete the iPhone camera roll's photos by using new version Photos?
    Thank you very much.
    Jack Law

    Please find the discussion at below link:
    Re: How can I delete duplicate photos?

  • How to set a new SCSI number for a second drive?

    How to set a new SCSI number for a second drive?
    Walter

    Walter,
    This web site gives a good diagram:
    http://www.hitachigst.com/hdd/support/dpes/dpesjum.htm
    On a Quantum hard disk drive - they were the original equipment manufacturer (OEM) hard drive provider for Apple, you will see three or four pairs of pins on the green circuit board. They are labled:
    AO . .
    A1 . .
    A2 . .
    If no pins are connected, you have SCSI ID Zero This was the standard setting from the factory.
    If you short out the pins beside AO .__. , you have designated SCSI ID One.
    If you short out the pins beside A1 .__. , you have designated SCSI ID Two.
    If you short out the pins beside A2 .__. , you have designated SCSI ID Four.
    These values can be added together to get other SCSI IDs. If you have a jumper beside AO AND A1, that will add up to SCSI ID Three.
    Some of the quantum drives used tiny black plastic jumpers with tiny metal contacts. I have yet to find a store that sells the tiny ones. I get my larger jumpers from old PC motherboards that are being thrown away. A small piece of aluminum foil will work as a jumper in a pinch. Just make sure it soed not fall off and short something else out!
    Jim
    PS
    CD-ROM drives are set at the factory as ID 3. Internal drives are set at ID 0. I set my external SCSI drive at SCSI 1 so it does not conflict with the internal drive. Internal Zip drives are set at ID 5 and external Zip drives let you choose between 5 and 6. I set my burners at ID 4. Come up with a master plan for your devices like scanners and burners. Apple System Profiler will give you info on the device ID. If the computer fails to boot, turn off all but one SCSI device and make sure of its ID. Then check each subsequent device by powering up only one device at a time while booting from a CD at ID #3.

  • How do I enter my new registration number for Quicktime Pro?

    How do I enter my new registration number for quicktime pro?

    Open QuickTime Player 7 and then the Edit menu /  Preferences / Register

  • New serial number for photoshop elements 9

    I have photoshop elements 9, my computer has ceased working and need to reinstall on my new computer.  How do i deactivate or get a new serial number for my programme.  I am desperately trying to use the programme.

    You shouldn't need a new serial, just use your present serial for pse 9 and if you have trouble activating pse 9 on your new computer or want to get back the activation you lost, use the
    Chat now button at the bottom of the following link.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html

  • I have mac book OS X 10.4.11 (processor 2 GHZ Intel Core 2 Duo and memory 2 GB 667 MHz DDR2 SDRAM). To which newer version can I update and how?

    I have mac book OS X 10.4.11 model No.A1181 (processor 2 GHZ Intel Core 2 Duo and memory 2 GB 667 MHz DDR2 SDRAM). To which newer version can I update and how?

    Welcome to the Apple Support Communities
    You can upgrade to Mac OS X Snow Leopard, and then, you should be able to use OS X Lion.
    First, buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup of your data, insert the Snow Leopard disc and upgrade to Snow Leopard.
    The disc will install Mac OS X 10.6.3, so open  > Software Update to install 10.6.8, the most recent Snow Leopard version.
    See if your Mac is supported > http://support.apple.com/kb/HT4949 If you see that it's compatible, call Apple to buy OS X Lion > http://support.apple.com/kb/HE57 Also, check if your apps are compatible > http://www.roaringapps.com

  • Do I need a new case number for the Transfer of License Form? I am the recipient of a transfer of li

      Do I need a new case number for the Transfer of License Form? I am the recipient of a transfer of license product registration. The transferring person has already filled out and returned the transfer of license form. Do I use the same number or do I need a new number.

    You need to get a new number for yourself because the transferor and the recipient cannot use the same number.
    Reference: I chatted with an Adobe agent, and that was the response they gave me.

  • App Store shows 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

    App Store shows that I have 9 updates but all Apps are up to date I have tried re downloading all the updates. All Apps show the correct version number post update.

    I have the same issue with one App in the App Store. The app is installed and current. But the App Store says I have an update. I tried restarting. No help.

  • I want to record new installation number for NetWeaver PI system

    Hi,
    I filled and send call of form to SAP?
    They sent me new installation number for NetWeaver SQL installation.
    I want to record new installation number for NetWeaver PI system into service.sap.com. How?
    I need to do this for CD/DVD ordering for installation of NetWeaver PI with Ms-SQL.
    Thanks.

    Hi,
    You can order the DVDs in http://service.sap.com/swdc.
    But you have already have the netweaver dvds, so you can install PI you dont need other dvds again.
    Regards,
    Vamshi.

  • I have about 80,000 photos on my Mac. I wanted to use icloud.  I needed to download the newer version so, for 14.99 I downloaded.  Problem is, now I have lost my photos! I tried 3x to but it always stops working.  HELP!

    I have about 80,000 photos on my Mac. I wanted to use icloud.  I needed to download the newer version so, for 14.99 I downloaded.  Problem is, now I have lost my photos! I tried 3x to but it always stops working.  HELP!

    What version of iPhoto did you have before upgrading to Mavericks and iPhoto 9.5?
    OT

Maybe you are looking for