A new wireless keyboard, does not work with 10.6.8.

but works with the Iphone, so the problem is not at the product I assume...

Hello:
If it is paired with the phone, it needs to be unpaired before it will connect to another device.  BT devices (for obvious reasons) may only be paired with one thing at a time.
Barry

Similar Messages

  • Wireless keyboard does not work with Safari.

    Space bar does not work when using Apple Wireless Keyboard with Safari to fill web forms.
    No problem with Firefox.
    Early 2008 iMac, 10.10.1, 6GB Ram

    Im going to assume you are using the Apple Wireless Keyboard with your devices.
    Whats probabaly happening is both of your devices are trying to connect to your keyboard at the same time and it is causing it to not function properly.
    I suggest you disable bluetooth on the device you AREN'T using and try it again with the one you ARE using.
    If this doesn't solve your issue, try re-pairing the keyboard with the iPad you wish to use it with. It may have just not made a strong connection.
    Hope these suggestions help!

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • The wireless keyboard is not working with my iPad2. I turned on Bluetooth and paired it.  What else is there to do?

    The wireless keyboard is not working with my iPad2.  I turned on bluetooth and paired the device.  What other hidden step is there to do?

    Well, the tiny green light comes on and blinks. . . After a frustrating time, I turned everything off.  Later, when I tried the keyboard again, it worked.  I guess the bluetooth process takes longer than expected.  So thank you for taking the time to help a technically impaired person!!

  • I have wireless mouse does not work with boot camp

    i have wireless mouse does not work with boot camp

    Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

  • New Applications model DOES NOT work with StandAlone OSD media

    If you are able to create StandAlone OSD media, the new Applications model DOES NOT work with it.
    - The creation of the media will be successful
    - The application installation itself will be successful
    Yet after the application is installed, it shows the correct process it needs to complete based on the return code in AppEnforce log, but does not process that information back to the the TS Manager so it appears to attempt to download a policy which fails
    causing the task sequence to error out..
    Thanks,
    Squirre1

    It is very similar to this description:
    http://madluka.wordpress.com/2012/05/15/error-0x8000405-when-installing-applications-to-a-workgroup-system-during-build-and-capture-task-sequence/
    It is using the application model, since it is not attached to the domain it is on a workgroup. But it is on standalone media and not during a build and capture sequence, it is during an OSD. But alot of the same puzzle pieces fit. Basically pointing to
    the new applications model not working during standalone OSD when the MP is not available. i would say that not enough information is getting encapsulated into the Application when exported onto the StandAlone media.

  • External USB keyboard does not work with T60 after BIOS upgrade

    External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
    It does the same with or without the docking station.
    Anyone else bumped into this problem yet? 
    Has someone found any fixes for this?
    t

    Hi and welcome the forum!
    Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
    v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
    Hope it helps.
    Maliha (I don't work for lenovo)
    ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
    IdeaPad: U350
    Apple:- Macbook Air [Snow Leopard]
    Did someone help you today? Compliment them with a Kudos!
    Was your question answered today? Mark it as an Accepted Solution! 
      Lenovo Deutsche Community     Lenovo Comunidad en Español 
    Visit my YouTube Channel

  • Wireless keyboard does not work after waking up from idle

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

    After MacBook Air went to sleep, wireless keyboard does not properly connect to MacBook - I can wake the MacBook up, but meaningless numbers are sent, and I cannot type in my password. Have to "open" MacBook, and use keys - disconnect and re-connect wireless keyboard. I also use Magic Mouse and it works flawlessly. Problem is small but annoying. Any help?

  • Apple USB keyboard does not work with one internal usb port

    Hi everyone,
    hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
    Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
    After searching the web on such problem, I tries a few things such as:
    I tried the keyboard on another computer (windows): works fine
    I tried usb stick and external DVD reading on the left internal usb ports: works fine
    I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
    I tried the SMC and PRAM reset : nothing
    Any idea ??
    Thanks
    Guillaume

    I'm facing the same problem, found any solutions ?

  • New Wireless Keyboard does not function Ctrl+Alt+Del in Windows 7 32 Bit

    As the subject, does anyone can help me ?

    HI, Michael;
    Crystal Reports 2008 is the only version that is tested / certified and supported on Windows 7.
    Another thing that I noticed from your post - Crystal Reports XI does not work with VS.NET 2008 - are you sure that is the version you are using? Which versions of our .NET assemblies do you have in your project?
    Best Regards,
    Jonathan

  • KG 1061 Wireless Keyboard Does not work

    Key "a" stopped working after I haven’t used my computer for a week. Other keys seem fine.
    It was working fine before. I’ve tried replacing batteries, uninstalling the keyboard and updating driver. Nothing works. Please help!

    Hello @Francescalam,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the wireless keyboard on your desktop computer does not work, and I would be happy to assist you in this matter!
    To re-enable the wireless keyboard for your system, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting.  
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Thinkpad laptop, red "mouse" button/nub in keyboard does not work with version 4.0, Why?

    IBM and/or Lenova laptop computers have the red button/nub in the center of the keyboard that acts with "mouse" functions such as scrolling up and down pages. After downloading Version 4.0 of Firefox this feature does not work anymore. Is it locked in some settings?

    i figured it out!
    1) go to control panel
    2) click on mouse
    3) click on the UltraNav tab at the top
    4) for the TrackPoint, i have the Enable TrackPoint box checked and the "Use as pointing device with advanced features
    5) click on Settings
    6) click on settings again towards the bottom right
    7) for "Scrolling Type" click on Smooth.
    that should work!

  • Wireless scanning does not work with Yosemite

    When I uppgraded from Mavericks to Yosemite the wireless scanning doesn't work anymore.Tried to find some new driver at the support page, but there are only drivers for Maveriks and erlier versions of OS X.

    Hi , Welcome to the HP Forums! I noticed that wireless scanning is not working after upgrading to Mac OS X 10.10, with your HP Deskjet 3520 printer. I am happy to help!  Some questions for you:  Is your HP Deskjet printer an all-in-one? Meaning, can it print, scan and copy?What is your printer's Product/Model Number? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As their are multiple types HP Deskjet 3520 printers.Are you able to make a copy with the printer from the scanner glass?  In the meantime, please see this how to scan guide, Scanning in OS X v10.10 Yosemite without HP Software, for some alternative scanning methods, and let me know if any of these options work!  Thank you for posting, and hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • Satellite C660 - new internal keyboard does not work

    Hi there
    I'm completely stuck I have a c660 satellite laptop the keyboard wasn't working.
    So I bought a replacement keyboard and installed it and checked in the device manager and it says it's there and is working correctly but the replacement keyboard is still not working.
    I have updated bios and uninstalled keyboard drivers and reinstalled them I have done everything I can think off to get try and get this new keyboard working but I am having no luck and could so with some help.

    Did you ever check if the external USN keyboard works properly?
    Im asking because in case the external keyboard would not work properly, the internal keyboard problem could be related to faulty keyboard controller (motherboard) or system problem.
    In case the external keyboard would work properly, you simply had bad luck with the new keyboard. It could be possible that the new keyboard malfunctions.

  • USB Ultranav keyboard does not work with Windows 7

    Hi, I recently installed Windows 7 to my Dell Latitude XT tablet and was disappointed to learn that my USB Ultranav Keyboard only works as a keyboard and not a 'mouse'; that is, the ultranav devices (touchpad, buttons, and trackpoint) do not work.  I have not had problems with the keyboard functioning in XP or Vista, so it was surprising to find that it will not work with W7.
    I thought all was going well when W7 recognized the Ultranav keyboard when I plugged-in the device, but all did not go as planned.  I let W7 find the drivers through Windows update, but then once they didn't prove to work, I followed W7's directions of reinstalling the drivers in its version of 'Compatability Mode', but that still didn't prove to work.  I would really appreciate any insights into this problem as it is one of my only (current) hesitancies about using W7.
    Thank you for your time and attention to my inquiry.
    Cheers,
    Tsugazi

    Hi, strangely enough, I got it to work.  Here's the what I did differently (for those with a similar problem):
    After installing W7, I plugged in my keyboard and let Windows find the drivers.  When this didn't provide functionality of the ultranav devices, I tried installing the Ultranav drivers, and when Windows said there was a compatability problem, I then opted to let Windows re-install the Ultranav driver.  Unfortunately, this didn't provide functionality either.
    Jump ahead 12 hrs and re-install of W7 (for other reasons).  This time out, I installed the Ultranav driver, THEN plugged in my keyboard.  Everything works now!  I don't know that this sequence will work for everyone, but it did for me.
    Thanks for your comments.
    Cheers,
    tsugazi

Maybe you are looking for

  • Connect to network, but not internet

    I have an iMac with 10.5.5 and a linksys wrt wireless router. My connection status is "connected" but I can not access internet. It is a cable ISP. I have tried changing config of router. I have also reset it to factory default. I have tried setting

  • How come I cant drag and drop images onto my imove

    I can't drag and drop images from my desktop or folder into imovie.

  • No sound on DV2000

    Hello, I own a HP Pavilion dv2000. I turned on my computer this weekend and all of a sudden I can't get any sound when I try to open iTunes.  It give me an error message of "iTunes has found a problem with the audio configuration"  I have tried every

  • Svrmgrl gives segmentation fault

    I recently upgraded from redhat 5.2 to redhat 6.0. A default intall of oracle errored out when it started creating the database objects. I did I a reinstall with out creating db objects and now when ever I try sqlplus or server manager I get a "Segme

  • How do I disable my pop-up blocker on a Mac Pro?

    My son is taking a summer school course and he needs to disable the pop-up blocker.  Anyone know how to do this?