A New Worlds Record

Hello,
I've hit a new world record – Eight Windows Security Shields blinking on my taskbar asking to update Flash.
This is my fourth thread concerning this problem. You can view the other threads here:
http://forums.adobe.com/message/4714633#4714633
http://forums.adobe.com/message/4583350#4583350
http://forums.adobe.com/message/4563117#4563117
Basically, I had to revert to Flash version 10.3 because version 11 breaks Dragon Naturally Speaking – this is a well-documented problem. I've turned off all the "do not ask for upgrade" options in Flash, but that makes no difference. Several times I have used the Adobe utility to do a clean uninstall. I'm constantly being bothered to upgrade Flash. Sometimes Windows "User Account Control" opens, interrupting whatever I'm doing, and forcing me to respond before I can continue.
The solution to this problem should be absolutely trivial, but I'm afraid the solution will be to just get rid of Flash. There must be some mechanism that Flash uses or other applications use to request Flash to check for updates. Delete this mechanism – problem solved. Problem is, I don't know what that mechanism is.
I have been asking about this problem for months, since June or July. It should not be this complicated.
Barry.

Hi,
Copy the URL from the contact create link and pass the values like Account Name etc by adding it to the URL, use & to separate the values.
hope it helps,
Mayank

Similar Messages

  • MSI 8600GTS' in SLI-New World Records in 3DMarks 03-05-06

    Well, finally buckled down and did it.  Tonight I finished my personal quest.  Have set world records in 3DMark with the 8600's in all 3DMark benchmarks.  I'd like to thank MSI, OCZ, Swiftech, Ultra, the Academy...... And I'd especially like to thank all the tweakers for all the info they have shared in this forum!  Had to beat out a QX9650..that was tough, but the good old 8600's clocked to 955mhz core did the trick. 
    Screenshot of 06 score below:
    http://i249.photobucket.com/albums/gg235/Pchas01/3DMarkWorldRecord.jpg
    Paul

    @ Autumnale....Quote from: autumnale on 06-May-08, 04:48:49
    Did you use any aftermarket cooling for the video cards?  I was looking at the Thermalright HR-03 GTs but they cost like 60 bucks a piece.  I might as well like save the movey and get like two 9800GX2's. 
    I used no extra cooling on the MSI 8600GTS'..I did remove the heatsink/cooler and substituted OCZ freeZe heatsink compound on them.  The factory cooling is very good, the cards ran 59-61c throughout the benchmarks with a 955mhz core!  Good job MSI.
    Oh and congrats on beating out the Core 2 Extreme   You know you got the world record probably because most people who dish out $1200 for a Core 2 Extreme won't have two 8600GTS's in their computer.  I mean why would they?  They probably have two 9800GX2's.  :D  But I'll bet it still feels cool to set a world record though.
    You are exactly right...I didnt feel like using Liquid Nitrogen on the CPU and 2 9800GXT's to try and beat a benchtop system.  I use my PC every day and it looks like "AnyPC" except for the Swiftech radiator attached to the rear of the case.  The next goal I'm going to set is to beat the "Team Palit" scores in 3DMark06 and set the world record for 9600GT's in 03/05 and 06.  Just waiting for the opportunity ($$) to purchase a couple of MSI 9600GT 512M OC cards.  If anybody from MSI corporate reads in here and would like to send me a couple for "testing", I'd really appreciate it..lol.
    @Gamin..thanks, I did it for the MSI community
    Paul

  • InDesign CC 2014 won't start - World record and a bug

    Seems to be a common issue where InDesign won't start. All sorts of advice all over the Internet, much of it useless.
    Spent a couple of hours trying various thing and finally found and deleted the PC preferences files.
    Set a new world record: 126 copies of InDesign running at once.
    One would think Adobe would write the program to let you know another instance is already running before launching it yet again.

    OS?
    Which CC 2014.?

  • Industry Leader Achieves World Record Performance With Grid Computing

    REDWOOD SHORES, Calif., June 8 /PRNewswire-FirstCall/ -- Today Oracle (Nasdaq: ORCL - News) announced a new world record TPC-H Three Terabyte (TB) benchmark for Oracle® Database 10g Release 2 with Oracle Real Application Clusters running on an HP ProLiant BL25p server blade cluster. With this achievement, Oracle continues its leadership position in this benchmark category, further surpassing IBM DB2. This latest TPC-H Three Terabyte result not only demonstrates the high-performance grid capabilities of Oracle Database 10g for large data warehouses, but also sets up a new milestone as the fastest TPC-H clustered benchmark ever published.
    Any comments or thought on this ?
    Hare Krishna
    Alok

    In addition, google also has this by default if you go to:
    http://www.google.com/palm
    Lightweight page, lightweight results. Your service likely provides additional benefits, just pointing out something else.

  • I am going to Challenge my 3rd Endurance World Record "Unstoppable BMW Challenge" utilizing both the New Ipad and Iphone 4s and I want to ask how much Video recording space is used per minute on both the iphone4s and Ipad2 ?

    Unstoppable BMW Challenge 2012
    I dont yet own the Iphone 4s or the New Ipad hence the question. I would also like to ask what Iphone Apps would the community recommend as essential apps for a Herculeun Guinness World Record Challenge with a view to showcasing a video diary and picture diary whilst the challenge is underway.
    Kindly Simon Newbound
    BMW Endurance Guinness Champion of the world 2012

    Seems like you're just advertising and showing off rather than asking a question, but a 16 or 32 3GB iDevice would do for video recording.

  • I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

    Hi j2399123,
    It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
    Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
    For the QuickTime recording options, check out "Recording with QuickTime Player" in
    Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
    http://support.apple.com/kb/ht4024
    And for screen recording specifically, there's
    QuickTime Player 10.x: Record your computer’s screen
    http://support.apple.com/kb/PH5882
    Thank you for thinking of Apple Support Communities for your support needs.
    Nubz

  • Help me pick a new video recorder

    I need a new video recorder. Please give me some suggestions in the $400-800 range. I have used a Hi-8 Sony, but the sound went, got old, etc.
    My primary use will be videos taken for coaching and my family, which I will put into iMovie and eventually burn to DVD through iDVD. I have been using iMovie 4, but I will upgrade if that would be better. The coaching movies are about 25 minutes with many, many clips, as they are short highlights (2-10 seconds each).
    I currently (and most likely for at least one more year) use an eMac 1.25 GHz G4 with 768 MB RAM and a superdrive.
    So, give me some good options. I like having a decent screen (my current one is a whopping 3"), as I often show athletes their form during practice, although that is not my top priority.
    eMac 1.25 G4   Mac OS X (10.4.4)  

    Hi! Purds,
    You didn't say where you were from. I had to purchase a new camera last semester and having no job, I had no money. I went to the WALMART Website and was able to find a good camera at the lowest price. (About $50 cheaper than I could find the camera anywhere else!) They shipped it right to my house within three day.
    And make sure it has FireWire! Sony has their own version of FireWire, i.Link, but you have to make sure that you can get the proper cable to use on the Mac.
    Always buy the best camera you can afford!
    Clay

  • Issue when changing a PO: it creates a new output record automatically

    Hello,
    The goal is to prevent that a new output record is automatically attached to a purchase order after a change has occurred.
    Current situation:
    Create a PO for holding and an output record is created for output type ZHP1.
    Release PO.
    Print the PO in ME9F.
    Change the condition record in MN05 and change the language of the print to a different language than the one of the supplier.
    Change the PO by adding some header text, the system adds a second output on the purchase order in the language of the cond record.
    This should not happen.
    Any idea how to achieve this goal rather via customizing than new implementation/changing the SAP standard code!
    Thank you in advance.
    Aydin

    Hi, I'm working with Aydin on this issue.
    It creates the second message on the PO and if processed via ME9F then it prints.
    But we dont want even that the second output gets created.
    We do not work with version management so changes to PO do not create second message.
    This second message comes up because language code has been changed in MN05 (one time change) after the first print.
    System sees that first message on PO is with language A and now condition record is with lang B.
    So If I change any little thing on the PO just to trigger message redetermination, it attaches a second output in the lang B. 
    If I dont change language code in MN05 and I still do my little change on PO, then it does not attach a second output message (which is good for us)
    I thought the only way out is to write a requirement program that would check that if a message already exists on the PO for that output type then dont create a second one. What do you think?
    Marc
    Edited by: mmlafe on Jan 3, 2012 5:02 PM

  • Error when starting new video recording

    When I try to start a new video recording I receive the following error:
    The operation couldn’t be completed. (OSStatus error -536870206.)
    I am using Quicktime Pro on an iMac running Mac OS X 10.6.5. Quicktime will work with iSight but not with my PS3 eye (usb webcam). I am able to choose the PS3 eye from Quicktime preferences and the video screen will show up with video from the PS3 eye (so I know that Quicktime recognizes the cam). But the error dialogue box appears immediately.
    Other information - I am using macam.component for Quicktime and the PS3 eye works perfectly with Macam.
    Has anyone received this error before?

    a2043 wrote:
    When I try to start a new video recording I receive the following error:
    The operation couldn’t be completed. (OSStatus error -536870206.)
    I am using Quicktime Pro on an iMac running Mac OS X 10.6.5. Quicktime will work with iSight but not with my PS3 eye (usb webcam). I am able to choose the PS3 eye from Quicktime preferences and the video screen will show up with video from the PS3 eye (so I know that Quicktime recognizes the cam). But the error dialogue box appears immediately.
    Other information - I am using macam.component for Quicktime and the PS3 eye works perfectly with Macam.
    Welcome to Discussions, a2043
    Has anyone received this error before?
    I have not, but I do not use PS3 eye. If it is a "UVC" (usb video class) device, it should work with any Mac running Mac OS X 10.4.9 or later _without additional software drivers_. Some unnecessary drivers can conflict with your Mac's software.
    If desired, you can remove the file macam.component from /Library/QuickTime and restart Mac to see if the PS3 eye can work with QuickTime without the additional driver.
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod4touch4.2.1

  • How to update purchase order when creating a new condition records

    Hi,
      We have the system configured so that whenever we update a condition record, a change pointer is generated. Then we the use of standard reports RMEBEIN4 and RMEBEIN, all open purchase order having that condition type is updated. However this only works when we update existing condition record. When we create a new condition record, this does not work even though the change pointer is created. Do the reports mentionned above works for the this case or another standard report that should be trigger.
    Thank you for your help

    hi,
    May be this is working for the conditions already existing in the info record for the PO's.  so when you have new condition record it updates only after you amend the PO with that condition and save it.
    Kiran

  • Inserting new input record into the table through screen

    Hi,
    Example UserTable and PaymentTable
    UserTable - UserID - Primary Key
    PaymentTable - containg couple of fields and UserId is foreign Key.
    I designed the page for to insert the new input record using the steps given in the doc "http://download-uk.oracle.com/docs/cd/B32110_01/web.1013/b28967/web_adv007.htm".
    When i click the persistEntity method its throws TopLink error cannot insert null value into UserId column in PaymentTable.
    Currently i am posting this reply from home... that's why i mentioning the scenario rather than posting the error.
    Please tell how to populate the values from the screen to PaymentTable.
    Thanks & Regards
    Vimalan Balan

    Hi Vimalan,
    Did you find an answer for you question?
    Regards,
    Phil

  • QT Pro new movie recording

    Is there any way to choose window size and bit rate when using the new movie recording feature(directly from firewire)? Recording preferences only lists good, better, and device native - without the ability to "fine tune". When recording TV using the better setting(h264) I get a different bit rate every time - from 215 kbps to 1164 kbps. I realize I can use device native then save it however I want but was hoping to avoid the extra step and long encoding time.
    powermac 2.0 DP G5   Mac OS X (10.4.3)  

    In QuickTime Pro, choose File > New Movie Recording (or File > New Audio Recording).
    I do not get the option New Movie Recording?
    Do you have a compatible video device connected to your system to provide video input? (I.e., QT 7 Pro does no include a "Screen Recoding" option if that is what you are trying to do. It only records video from a built-in or compatible externally connected video device.)

  • Credit memo reqst picking new condition record

    Hi Experts,
    Recently we changed the VAT record from 17% to 20 %
    When we create a credit memo reqst with reference to an Invoice, system is picking the VAT record as 20% instead of 17% in the invoice.
    Even though I maintained the Pricing type in copy control from invoice to credit memo reqst as "D- Copy Princing Elements unchanged ", system is still picking the new vat record of 20% only.
    Any inputs to resolve this would be apprreciated.
    Thanks in advance

    Hi,
    please try with pricing type A or E ?
    FYI this is from SAP OSS note:
    'A' (Copy price components and redetermine scales):
               No condition types are redetermined. Only the scaled prices are adapted due to a changed basis.
    'D' (Copy pricing elements unchanged):
               As in pricing type 'A' but the prices are fixed (no scales are read). Condition base value and value are redetermined.
    'E' (Adopt price components and fix values):
               As in pricing type 'D' but neither condition base value nor value are redetermined.
    For more details refer to oss note: SAP Note 24832 - Pricing rules / TVCPF
    Regards
    Raghu.

  • New info record with same details as archive one.

    Hi Experts,
    Due to some issue we want to archieve some standard info record which are created on vendor / material group / plant  basis.My query is does system allows to create new info record with same vendor / material group / plant combination after archiving earlier record which is on same basis.
    Thnaks & Regards
    Vinay

    Hi Jurgen,
    Thanks for reply.
    Our issue is while creating work order(IW31) having external services upon entering info record number in some cases in same client rate is picked up from info record condition but some times from last purchase order based on info update.
    We have checked following points.
    1.In all the cases work order type  is same.
    2.Info record are of standard type with same condition.info record are for vendor & material group combination.
    3.Checked after changing rate in info record and in purchase order but similar issue exists
    4.Compare vendor master also.
    5.Their are no contract /sch.agreement for vendors.
    Our requirement is to have rate from info record in all the cases in work order.So have two options.
    1.Archiving info record-But will need setting in SPRO and also need to create same record again with same combination.Also as their are recent purchase order against those info record not sure whether system will allow or not.Can you please tell what are prerequiste for archiving info record.
    or
    2.To remove only purchase order number updated in EINE table in those info record where this issue is occuring.We have checked in development system and after removing purchase order number in EINE table it picks up rate from info record.
    So thought of checking before removing order ref.from EINE table.
    Thanks
    Vinay

  • FM FOR CREATING NEW CONDITION RECORDS FROM INPUT FILE

    Hello vikas,
    I need to develop a interface program FOR CREATING NEW CONDITION RECORDS FROM INPUT FILE.
    Is there ay function module to update or create the condtion records,
    if u have any example interface program to update conditions records please send me.
    regards
    ram.

    This must be your compiler output.
    Basically, it is telling you two things that are wrong - in syntax.
    1. On line number 11 of the file RationalCollection1.java, the compiler expects a type identifier - that would be the object or return type such as int, String, boolean, etc.
    The reason it is doing this is probably due to your not ending a previous statement - like the "expected ';'" error statement. Check your code, make sure that methods (brackets) are closed correctly and there are no open statements (i.e. missing the semi-colen at the end).
    2. On line number 33 of the file RationalCollection1.java, the compiler expected the closing bracket. Thus, you didn't put the bracket where the compiler wants it.
    It appears that you have skipped some lines of code. Those lines are the problem, post them - post lines 30-36 and 9-15 so we can see what is happening around those error lines.

Maybe you are looking for