A "None" transition without a break

I have one 5mg relief map as a constant Master Map. I do not want any transition (None) but only a smooth (none blink) transition to the next slide which begins with the same graphics as the current slide.
How one do this without any interruption?

Thanks, Gary. I did find a solution to the problem which I should have guessed earlier.
1. My relief map is my master slide, and all my graphics are simply copied from Adobe Illustrator where they are made.
2. My problem was the blink in the None transition, but I find that this is because I thought I had to have some type of Build chosen. This meant that my graphics had to await my master slide.
3. I now discovered that if I put on the graphics from the previous slice and leave my build for these graphics as "None" (and the transition at "None"), then they will appear with my master slide without a blink.
Thus I will try your suggestion above, but my immediate problem is solved. Many thanks!

Similar Messages

  • Merge Cells Without a Break?

    Post Author: JT21598
    CA Forum: Desktop Intelligence Reporting
    All,
    Basically what I am trying to do is merge some cells that have duplicate values in them.  The records themselves are not duplicates but there are certain values within those records that show multiple times and I would like to only represent these values once.  Here is a sample which might make this clearer.
    SECTION HEADER1
    Object1          Object2          Object3          Object4
      12                   13                  14                  15
      13                   13                  15                  16
      14                   13                  16                  21
    SECTION HEADER2
    Object1          Object2           Object3         Object4
      (Different value here than from before.)
    Basically what I would like to do is take the value in that is repeating in the Object2 Column in Section Header1 (13) and merge those cells together and center the number so that you can tell the one value is being used to represent the value in all three of the rows.  I have looked far and wide and the only way I have found to do this is with a break which will completely mess up the formatting of the report.  Any help would be greatly appreciated.  Thanks.

    Thanks, Gary. I did find a solution to the problem which I should have guessed earlier.
    1. My relief map is my master slide, and all my graphics are simply copied from Adobe Illustrator where they are made.
    2. My problem was the blink in the None transition, but I find that this is because I thought I had to have some type of Build chosen. This meant that my graphics had to await my master slide.
    3. I now discovered that if I put on the graphics from the previous slice and leave my build for these graphics as "None" (and the transition at "None"), then they will appear with my master slide without a blink.
    Thus I will try your suggestion above, but my immediate problem is solved. Many thanks!

  • "Fade to black" transition without handles ?

    Is there any method to do a "fade to black" transition without handles in FCP 6 ?
    Like in iMovie for example. Maybe with another Pro App?
    Many Thanks.

    Have the Fade to Black end at the end of the clip, not in the middle. Notice when you drag transitions onto clips how you can make it end on the cut, be in the middle of the cut, or start at the cut.
    Shane

  • How do I get Whatsapp on my iPad without jail breaking?

    How do I get whatsapp on my iPad without jail breaking?

    You don't, as the developer of WhatsApp has not made an iPad version.

  • Hi, may I ask a question? Is there any chances to have my iPhone 4S homescreen rotate to landscape view without jail breaking? Appreciate for any info~

    Hi, may I ask a question? Is there any chances to have my iPhone 4S homescreen rotate to landscape view without jail breaking? Appreciate for any info~

    No.

  • [ID5] Find line without paragraph break

    Hello,
    I want to Find lines containing a specific character style. But when that line is at the end of a paragraph, it also selects the paragraph break. Which GREP do I have to use to select the line without the break?
    Regards, Sjoerd

    Almost forgot.
    Neither Find Text nor Character Styles have anything to do with lines. "Find Text" never selects an entire 'line'. Not even GREP can do this. (The Online Help for GREP contains the word "line" a couple of times [*] but it shouldn't, except in the negated sense of "GREP cannot distinguish a separate line".)
    [*] From memory. I tried to verify this, but the Online Help failed to appear. Again.
    ... Adding Insult to Injury: a pop-up offering this:
    Would you like to add Community Help search on Adobe® InDesign™ to your browser's list of search engines?
    Well, I don't think so.

  • Inserting transitions without using footage

    Hi,
    I have a transition question, (relating to FCP X 10.0.3), I'm adding transitions between clips, I seem to recall that I used to drag a transition across, and as I got to insert it the clips would automatically part and the transition would drop in.
    Now when I drag a transition, FCP X says it needs to use footage from either side to generate the transition, and generate it or cancel it. This is fine with long clips but not so good with the short ones. Does anyone know what I need to change to get this behaviour back?
    Thanks in advance

    You don't seem to be aware of the importance of having HANDLES. Handles are pieces of your clip before and after the part that is used in the timeline. The handles are what FCP X uses when you create a transition.
    When you select part of a clip inside an event (by dragging or setting an In and an Out point), and then insert this selection in a timeline, the outer bits of your clip that didn't get selected - i.e., the Handles - will be used for transitions. If you select ALL your clip, there are no handles. This has nothing to do with the length of the clip.
    Having handles is the right way to do it and I hope that you will come to appreciate it.
    If you force a transition without having handles, all your content to the right of the transition will be shifted, and the length of your movie will be reduced. This is BAD, as it will mess up things. For example, if you have a sound clip connected to your storyline and some images further down the story were synched to a beat in the music, they will become out of sync.

  • How can I connetct internet on my ipad mini (non cellular) without wifi ? is there any wifi adapter available ?

    How can I connetct internet on my ipad mini (non cellular) without wifi ? is there any wifi adapter available ?

    You can not connect to the internet with a WiFi only iPad without WiFi. You can get a mobile hot spot from your carrier but that still connects to the iPad via WiFi and comes with a monthly data plan like a cell phone.

  • Are there any apps that install animated lock screens without jail breaking my iPhone 5?

    Are there any apps that can install animated lock screens without jail breaking the iPhone 5?

    I don't know of any way, except perhaps by using an animated GIF or PNG as your wallpaper. I've never tried it, though.
    I don't recommend jailbreaking your phone, voiding your warranty, and risking ruining the phone just for this feature, however - http://support.apple.com/kb/HT3743

  • I just recently upgraded to iMovie 10.0.1.  Now whenever I import video longer than 30 minutes, it automatically splits it at 30 minutes.  How can I get my entire video clip at once without a break again?

    I just recently upgraded to iMovie 10.0.1.  Now whenever I import video clips that are longer than 30 minutes, it automatically splits them at 30 minutes.  How can I get my entire video clip without a break again?

    As long as you know your serial number you can download PSE from here:
    Download Photoshop Elements products | 11, 10
    If you don't know your serial number:
    Find your serial number quickly

  • Does that iphone have the ablility to override the silent mode without jail breaking it??

    In a corporate enviroment, we need to be able to setup some contacts (emergencies, 911, medical response, security response, etc.)  that would override the silent mode to notify the user(s) of a response needed.  I've been looking for apps and no one seems to be able to do this without jail breaking the phone.  Our corporate policy says we can NOT jail break the phone.  Is this Not allowed in the IOS?
    Thanks
    Scott

    Preferences, energy saver - set to never sleep
    http://support.apple.com/kb/ht2412

  • HT1267 Can i use Ui setting without jail break my ipnone 4?

    Can i use Ui setting without jail break my ipnone 4?

    What UI setting? Jailbreaking would be a very bad idea.

  • I have updated my IPhone 4s to ios6, but for some reason it didn't install Siri with the update, is there any way I can install it onto my IPhone without jail breaking the phone?

    I have updated my IPhone 4s to ios6, but for some reason it didn't install Siri with the update, is there any way I can install it onto my IPhone without jail breaking the phone?

    Macca_astles01 wrote:
    It is an iPhone 4s, it has voice control but it's not Siri, is there any way I can install it?
    It cannot be installed. It comes pre-installed on every iPhone 4S and later. Maybe it was disabled under Settings > General > Restrictions.
    Courcoul wrote:
    Wasn't SIRI one of the gee-wiz doodads introduced with iOS 6? Cause my boss' 4s w/iOS 5 certainly does NOT have it. And on my i5, the Spanish-speaking SIRI I got turned out female, with all the foibles and vicissitudes....
    iOS 6 only added support for the 3rd generation iPad. It was always on the iPhone 4S. Then the same goes for your boss: Maybe disabled in restrictions, or maybe actually an iPhone 4.

  • Is there a way to download whatsapp for free onto my iPad 2, without jailing breaking it

    Is there a way to download whatsapp for free onto my iPad 2, without jailing breaking it

    Restting the iPad may reset the Newsstand app as well. One other thing that you can try is to quit Newsstand, restart the iPad and see if that helps.
    To quit Newsstand - Go to the home screen first by tapping the home button. Quit the app by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on the Newsstand app icon until it begins to wiggle. Tap the minus (-) sign in the upper left corner to close the app. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    BTW .... When you download an app again via the Purchased Tab from the App Store, you are downloading from the cloud. That is one of the features of iCloud. Your app purchases are stored "in the cloud" and downloaded from there. There is no need to sync with your computer.

  • Vendor open items report without page break after changing vendor account

    Hi,
    I would like to get the vendor open items report without pagination when the vendor account changes.
    The option of deleting the * mark in the Filter page is not valid for me, because this way the vendor's name dissappear. I mean, it would be ok if I could show in the output of the report the name of the vendors.
    Thanks in advance.

    HI,
    If I understood your issue correctly then in the report S_ALR_87012085 is a field "Summarization level (0-4)" in the output controls.
    You just have to set this field to the value '2'.
    When you set the field to two, the page break will first executed, when the page is "full".
    If you want to see information about the "Summarization level (0-4)" field, you just have to set the cursor in it, and press F1.
    I believe this answer solve your problem.
    Please assign points if it useful.
    Regards
    Ravinagh Boni

Maybe you are looking for