A NULL interface pointer has been dereferenced

This was an answer to someone who had this error message. I scoured the web to see what I could find. This is what I wrote to him. Does anyone else have any answers or know a work around???
Hello,
After doing some research on the error message, "A NULL interface pointer has been dereferenced". There may be a work around.
Are you on a Mac? If you are, you may want to try updating CS4 and Installing the 9.0.2 update either manually or using the Adobe Update Manager. However you mentioned you exported to AVI which I know is a PC codec. Still maybe there is a adobe update for the PC as well.
Also, if you are using video footage that uses interframe compression in any of the video placeholders (mpeg, h.264, mp4, etc), or if you have one or two mp3 or aic audio files, that may be an issue as well.
If that's the case, convert audio files to aiff or wav, and convert the video into something that doesn't use interframe compression. Maybe Photo Jpeg, Animation, or apple pro res.
Are you using just pictures? If so, then that info won't help either.
If you are just changing the text and using pictures, I'm not sure why you are getting the NULL interface error.
Answer the questions above and I'll try and help you out some more.
Thanks,
Cassidy Bisher
President
DropDrop
http://www.dropdrop.com
Hello once again,
If you could review this small issue I had with one of the templates or forward this to the customer service department.
I have been attempting to render the Grid Warp Final Main Comp for some time now. It took me about 10 minutes to swap the text and pictures out, but the rendering process has taken me over 20 hours and I still havent been able to pinpoint the issue. I have tried rendering in After Effects CS3 and After Effects CS4 both which give the same result. The rendering process will get to anywhere from 400-600 frames and it will give me a warning saying: "After Effects warning: A NULL interface pointer has been dereferenced." Right after clicking OK on this warning another window comes up saying After Effects error: Quicktime export failed (14). This happens whether I export as FLV or if I use the render queue to do avi. Please advise on a possible solution when you have a chance as this heavily delayed our project time line. I have made sure there is no missing files in the project.
David

I got the same exact error in Windows 7. Seems to be a video inside the composition or a part of the composition itself thats the problem. I've tried increasing both the swap space and the ram usage. Still nothing but the video does push a solid 3 gigs of ram usage. I'm using cs3 myself.

Similar Messages

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

It seems the point has been missed....

After many hours trying to get out fo the "Cloud" mess -I recently noted that all the Holidays (religious) have disappeared from Apple Calendar choices.
That fact is evident, the question is WHY! We ought not to have to keep looking elsewhere until you find a replacement.
I joined the Apple "conglomerate" 5 years ago hoping they would continue to support their CLIENT BASE, but alas, more and more I see them abandoning us!
Truly, not a healthy business plan!
Bob P.

A number of subscription calendars, made by third-party authors not Apple, were hosted on the web.me.com server (part of the now defunct MobileMe) and their authors have never got round to hosting them on a server which works. It looks as if Apple have now decided to remove them from the listing, which makes sense rather than have people wondering why the links don't work.
It's no good complaining about Apple - you would need to complain to the authors who appear to have lost interest in their products.

All of my music that wasn't purchased from the itunes store has been faded out on my ipod, despite me being able to play them in itunes. half my songs have exclamation points but only in the 'on this ipod' section, and when i double-click no window appear

I'm freaking out because almost all my music except for those songs purchased directly from the iTunes store has been deleted from my iPod - about 35 gigs. The songs show up, but they're all faded out and unplayable from my device (I have the newest version). Exclamation points appear beside all my songs in the "On this iPod" section, and yet I can't double-click to locate the files as nothing pops up. Some of my music has a weird circle next to it and is even more faded out when I'm in the "On this iPod" section - that's been happening for a couple of days. Yesterday I tried to set my settings to sync with my library only, and it worked, but this morning everything got even worse with the rest of my songs disappearing. What's happening???? Help??

The syncing of music is one way, computer to phone. See this helpful document from a fellow user. Credit goes to the author.
https://discussions.apple.com/docs/DOC-3141

Closing the device deletes what has been typed to that point. Is this normal?

Closing the device deletes what has been typed as an e-mail up to that point. Is this normal, and can it be avoided?

If the content you typed was actually saved before you quit the session, it should be there
later on when you open it again. There may be some settings in preference to auto-save
that may need checking; or perhaps there could be something else behind this issue...
To be sure, which device do you refer?

Iphone4 would not restore Error -50. I have tried to restore and it restored it to the point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out.

Iphone would not restore---- Error -50. I have tried to restore, and it restored it to the new point that it created after 5.0 was installed. How can I get it an older restore point from my backups and restore it on another computer? The phone has been wiped out. I can see earlier backups in my C:\Documents and Settings\user\Application Data\Apple Computer\MobileSync\Backup folder. There are four subfolders in this address. I need my contacts, photos, and messages back. I know this is a common error but I can not figure it out. I have ran the other troublshoot items in the error steps for 13 and 14 like apple says. Is there a way to call apple and get a step by step of how to restore from another restore point? Does anybody have a solution????

It tells you to go to Error 13 and 14 if you receive error (-50).
Here is what I have tried...
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting. I have moved it around to different ports.
Put a USB 2.0 hub between the device and the computer. Didn't change anything.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts. Removed all virus protection and firewall.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.Used the Microsoft fix it.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online. Doesn't matter.
Try to restore from another known-good computer and network. I do not know how to do this or how to find the correct/full/complete restore point. There should be more information for this.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

After 04 months of purchase of iphone 5 the lock button is too hard. At times its not working at all. The phone has been purchased in USA now I'm not getting service in India. After all whats the point in spending so much amount without any service.

The warranty says that Apple may restrict service of an iPhone to the country of sale, and any reliable salesperson will tell you that if you tell them that you plan to use the iPhone in another country. Such service restrictions are common with cellphones and are by no means limited to Apple's phones.
Sorry, but if your iPhone requires service, you will need to send it to someone you know in the US who can get it serviced and then send it back to you.
Regards.

UML290 & Mac: A new network interface has been detected

I have a MacBook Pro running Snow Leopard, and I just purchased a Pantech UML290 4G modem, live in an area with good 4G coverage, and I get a good 4G signal. I am running VZAccess Manager version 7.2.5, and in general it connects to the 4G network fine and stays connected. Every time I connect the modem to my laptop, Mac OS generates a "A new network interface has been detected" pop up with the option to Cancel or go to Network Preferences. Canceling makes it go away.
I also see 4 devices under System Preferences > Network:
1. Verizon UM290 (which shows connected, not sure why it's missing the L in UML)
2. Pantech UML290 USB Modem
3. Pantech UML290 USB Serial
4. Pantech UML290 USB CM
Does anyone know how to get rid of the annoying message every time I connect the modem? Thanks.

I have the same set up. Get the same messages almost everytime I start up the UML290. Not sure why I occasionally don't get it. Many others on the forum have reported this as well. For now, we live with it.
Sandy

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I keep getting a "new network interface has been detected. Hoping to stop getting this automatic message I configured it, or thought I did. I'm still getting the message. How do I stop it?

I thought the same too, looks like its not just me having this issue, hope Apple do something soon. Thanks for your help

Recovery Point creation fails because change traking has been marked inconsistent

I have a Hyper-v Cluster that is backed up using DPM 2012 SP1, for the last week when recovery point creation attempts to run I receive the following error message.
Change Tracking has been marked inconsistent due to one of the following reasons
1. Unexpected shutdown of the protected server
2. Unforeseen issue in DPM Bitmap failover during cluster failover of one or more datasources sharing the tracked volume. (ID 30501 Details: The parameter is incorrect (0x80070057))
After this error it performs a consistency check, it completes and a backup is stored, but as soon as it does another recovery point creation it fails again with the same error.
I have a Server 2012 R2 Hyper-v cluster with 2 virtual hosts and a quorum disk acting as the deciding vote. The backups completed for a month prior to this with no problems. No event seems to have triggered this problem it is just completely out of the blue.
I have update roll-up 8 on DPM and have both hosts within the cluster updated. They seem to consistently fail on one virtual host and intermittently fail on the other virtual host.
The event logs do not have any errors other than Event ID 1 VDS basic provider

Hi,
Lets see if cleaning up all the filter bitmaps clears up the problem.
To get to a clean state please delete DpmFilter* files from “System Volume Information” using following steps.
1. Open an administrative command prompt and run:
       C:\>fltmc unload DpmFilter (run on all cluster nodes)
2) From one of the Cluster nodes, run:
       C:\>psexec -s cmd (psexec is
www.sysinternals.com tool used to run cmd under system account)
3) In this new command prompt (running as system) run:
       C:\>CD C:\ClusterStorage
       C:\ClusterStorage>For /d %i in (volume*) do del /s "%i\System Volume Information\DpmFilter*"
Note: The * includes (DPMFilterBitmap{Guid}, DPMFilterStatus, DPMFilterLog, DPMFilterTrace*)
4) verify files are deleted by running
        “dir /s /b DpmFilter*”
        exit
5) Then load the filter again on all nodes
       C:\>fltmc load DpmFilter (on all cluster nodes)
6) Run DPM Consistency check against all the VM's to re-start normal protection.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.

After downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet

after downloading osx 10.9.2 when i open my logic pro 9 and begin to audition loops that came with lp9 i get a message that says "audio device has been removed and then a second message the " select driver not found(-10202). my interface is a apogee duet. Can anyone provide a solution to this problem. Thanks

YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga.

I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also ca

I am now unable to print pdf documents. The message on screen says I have not selected any pages to print, even though the bullet point saying 'All' pages has been clicked. I have recently upgraded to adobe reader XI, could that be the problem? I also cannot sign in to Adobe Export pdf now either. It says 'error occured while signing in'!

Open Adobe Reader | Edit | Preferences | Documents: change View Documents in PDF/A Mode to Never.
Regarding the ExportPDF problem, please start a new topic in the ExportPDF forum.

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

No servlet class has been specified for servlet null

Hi,
I�m trying to bend tomcat in my own application. Therefore I�m using the Embedded Tomcat version 5.5.23.
I have started only a server, engine, host and context, so I have a server without the sockets etc. this because it has to become a test-application for the web-app of the company.
The server starts gracefully, but when I call context.invoke(request,response) I get this error:
SEVERE: Allocate exception for servlet null
With this stacktrace:
javax.servlet.ServletException: No servlet class has been specified for servlet null
at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1016)
at org.apache.catalina.core.StandardWrapper.allocate(StandardWrapper.java:791)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:127)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:870)
at nl.realworks.embedTomcat.EmbedTomcat.invoke(EmbedTomcat.java:74)
at nl.realworks.embedTomcat.StartEmbedTomcat.main(StartEmbedTomcat.java:29)
Exception in thread "main" java.lang.NullPointerException
at org.apache.catalina.connector.Request.setAttribute(Request.java:1383)
at org.apache.catalina.core.StandardWrapperValve.exception(StandardWrapperValve.java:331)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:145)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:870)
at nl.realworks.embedTomcat.EmbedTomcat.invoke(EmbedTomcat.java:74)
at nl.realworks.embedTomcat.StartEmbedTomcat.main(StartEmbedTomcat.java:29)
does anyone has a idea what the cause of this problem is? The request I send is �GET /index.jsp� using a MockHttpServletRequest of the spring framework. I convert the mockhttpservletrequest to a org.apache.cataline.connecor.Request. and that works.
The code in tomcat where the error is caused by:
// Complain if no servlet class has been specified
if (actualClass == null) {
unavailable(null);
throw new ServletException
(sm.getString("standardWrapper.notClass", getName()));
Thanks in advance.
Auke Noppe

Tobias
Yes , you are correct. We dont need to replicate DDIC tables for direct BW replication. This was the first time we were working with BW on Hana and never installed DMIS component on that system. The error was gone after we put the addon.
Mahesh Shetty

An inconsistency has been detected in your Interface.

Hi
I have some interfaces which extract from an Oracle source system to an Oracle staging database (and ultimately to Essbase). I am using the LKM SQL to SQL.
The issue:
The interface throws the following exception when it is opened after changing the context:
Inconsistency detected
An inconsistency has been detected in your Interface. This is probably due to modifications made in your Topology. Please re-save your interface.
In addition to this, the LKM reverts to LKM Oracle to Oracle (DBLINK).
Is there something I am doing incorrectly?
Cheers

Probably you created the interface , saved it and then went to topology and change the context .... then ODI will give this warning . You need to open the interface once again and re-save it . LKM Oracle to oracle(DBLINK) is the default KM for this technology pair .. that's why it is reverting back to the default KM. You can change it to your preferred KM .
Thanks,
Sutirtha

A NULL interface pointer has been dereferenced

Similar Messages

Maybe you are looking for