A.pack dialnorm -31 trouble
Hi,
As part of a DVD I'm authoring I've outputted pcm (stereo/non-surround) aiff audio that I need to convert to ac3 using Apack. The entire audio program is already level matched and mastered and should stay as is. My hope is to use apack as a simple file size reducer, completely disabling any of its dialog normalization tendencies.
From everything I've read, setting dialnorm to -31 (and setting compression preset to NONE) ensures that the levels will not be messed with. But my resulting ac3 files have louder levels than the source pcm files when compared side by side in DVDStudioPro. I must be misunderstanding the concept because the levels are definitely getting messed with.
Is dialnorm a setting that has an effect on....
-just the encoding results/levels?
-just the playback of the authored DVD on a DVD player?
-or a combination of both?
My levels are already set and, unless I'm completely misunderstanding the concept, I'd like them to be left alone.
Thanks so much in advance for any help with this.
g4 dual 1.0gb Mac OS X (10.2.x)
It might not be A.Pack or your AC3 file, but your DVDPlayer software.
Go into the preferences and disable Dolby Dynamic Range Compression... this should help even it out!
Otherwise using -31 as a DNV is right.
Similar Messages
-
Wireless Printing - HP LaserJet P1102w
Yesterday I purchased an HP LaserJet P1102w printer, followed all the instructions that came in the pack and enjoyed trouble free wireless printing for a short little while, even from my iPhone 4 after updating the firmware on the printer.
My problem now is that the printer seems to keep dropping its connection with the router. The blue wireless indicator light seems to be quite often flashing rather than static.
This is an issue as when I want to print a document I have to wait for a long time before the documents come out of the printer. It is tedious.
Any suggestions or recommendations would be welcome.
YecapReboot the router, make sure the printer is powered on and connected to the network as best you can. Then download and run this tool - the Print and Scan Doctor:
http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-PDU&ju...
Let me know where the tool takes you and we will go from there.
Mike
Say "Thanks" by clicking the Kudos Star in the post that helped you.
I am an HP employee. -
Dynamic Link / GetLanguageID Error CS5 - Win7 x64
I can't get Adobe CS5 to start on my machine! It is either a DynamicLink error or this one below.
Have tried:
-removed ALL codecs from my system (using VLC player, Divx.. )
-uninstalled CS4 (and then ran Adobe CS4 Clean Script)
-started AE CS5 holding down SHIFT+CTRL+ALT, deleted all settings
-started 'Adobe QT32 Server.exe' manually, then started AE CS5
Nothing.. still crashes at startup! Please someone help!
My system: Windows 7 Pro, 64-bit, Dell T5400, 2xXeon E5440, 16GB RAMThanks Mylenium for your help. I have deletet these two folders - with no effect:
C:\Users\{USERNAME}\AppData\Roaming\Adobe\After Effects\10.0 < Deleted the entire folder "10.0".
C:\Program Files\Adobe\Common\Plug-ins\CS5\MediaCore < This folder is empty
How do I find the CoDec Packs that cause troubles? I just uninstalled all codecs (again), deleted the folders above but none of this works.
I also removed all fonts that could cause trouble as someone else suggested in this forum.
Also, where is the error log file that After Effects CS5 shoud have created when it crashes? -
Having trouble when I launch iTunes (version 11.0.2) on my Dell Laptop running Windows 7 Professional (service pack 1). I get an error message indicating software required to communicate with iPod and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you? I normally respond with OK and it immediately tells me "could not be repaired. Please reinstall iTunes..." I have done this a number of times to no avail.
I also notice Quicktime is not getting installed at all.
That one is normal nowadays (ever since the iTunes versions 10.5.x).
The software required for communicating with iPods and mobile phones was not installed correctly. Do you want iTunes to try to repair this for you?
Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
(If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
Does it install (or uninstall and then reinstall) properly for you?
If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.) -
Trouble with Windows Service Pack 1 ?
I am using
Adobe CreatePDF, and because I am using it with a musical notation software program
, Finale, I have to use the Adobe Desktop Printer, to convert the file
s. This has worked very well for a couple of months but, the other day I attempted to us
e it and it doesn't work. I contacted Adobe, through their online chat room and a
fter trouble shooting my computer, the tech said that the Adobe Desktop Printer does not work
now with Windows 7, Service Pack 1. They are working on the problem. Has this been addressed on the forum yet? I'm sorry, but I couldn't find it if it has. Anyone else having this problem. It's really put me in a bind. How are we to know when the issue has been addressed?
Thanks.I'm sorry, in the Subject Window, I neglected the "7". It's Windows 7, Service Pack 1.
Thanks. -
Trouble packing InDesign files (CS6)
Recently I've been having trouble packing my InDesign files, getting this message (translated from Swedish): "Failed to copy the necessary linked files" and the document is then not packed at all. Any suggestions what I can do about that? All links seem to be ok and the documents seem to be ok otherwise.
Check for illegal characters in file names. “/“ seems to be the biggest culprit. Very long file paths can also cause it.
-
Trouble exporting any mov files into H264 after adding K-Lite codec pack into Windows XP SP3.
I have QuickTime 7.7 (1680.34) installed. I have used it extensively and exported the video separate from the audio and extracted and used filters and it has all worked great with all of the other codecs I have had installed. It even worked great after I recently installed this K-Lite codec pack that actually saved files in a *.hdmov file type and I was able to view them with the Media Player Classic .... (I have Windows XP update 3) and see what I could do over there and then go back to saving them as *.mov file types and work in QuickTime Pro. And still export them relatively fast to their latest H264 format.
I gave more file types to the Media Player Classic. I think along the line of the just the *.3g2 and *.mp4 and took them away from QuickTime but still keeping the *.mov, *.qt and *.mqv file types .... and that is when I think everything must have changed. all of a sudden I can not save any *.hdmov files and the export process in QuickTime takes longer than forever.
I thought that I had reconfigured Media Player Classic back to its default ....
and it should all go back to being how it was.
Is there some Direct Show filter or codec that upsets QuickTime Pro ... that I might have not reset back to what it was?
Any codec help would be much appreciated.
This is what the K-Lite site says in one instance about H264:
If the video that you are playing contains H.264 video, then you could try using another decoder. The codec pack by default uses ffdshow for decoding H.264 video. This is a free and open-source decoder. Other decoders exist that have better performance as ffdshow. They should give you smoother playback, specially if you have a dual-core or quad-core processor.
Alternative H.264 decoders are:
CoreAVC. This decoder is unfortunately not available for free.
DivX H.264 decoder. This decoder is available for free as part of the DivX Bundle. Tip: disable everything in the bundle except the H.264 decoder.
ffmpeg-mt. This is an experimental multi-threaded version of the libavcodec decoding library, which is used by ffdshow. You can select ffmpeg-mt as decoder in ffdshow video decoder configuration.
MPC DXVA H.264 decoder. This is an internal decoder of Media Player Classic Homecinema. It uses your graphics card to perform most of the decoding process, resulting is a very low CPU usage. You can enable this decoder though: MPC Options -> Internal Filters. Note: this decoder has some specific requirements.
I downloaded the DivX bundle and will pull out that codec. I bought the CoreAVC for $13 but Norton said it was a risky file when I downloaded it ... (I have a question into the site about that) and I will try the ffmpeg-mt codec as well as see what they say about the last one. I will also try to undo everything I did that happened I guess before QuickTime started to export so slow that it is not even worth it to try and convert a mov file into H264.
Sorry so long ... I just was trying to lay out the things I have attempted, will attempt to try and improve the situation.
Thanks again very much if anyone makes it thru this ... geez .. sorry.Hello Tim,
I decided to do a clean install, a fresh new installation of windows and all its updates, I didn't get the option of
install SP1 yet.
After that I only installed Catalyst drivers: 11.5 and Realtek HD audio drivers, all downloaded on May 24 2011.
Then latest FFDShow and MPC-HC to test, both x64 versions Nothing else installed.
Only a fresh copy of windows with its updates and those mentioned drivers.
To my surprise, it happened a gain.
It still crashes after a while when playing MKV videos.
It's weird, because it doesn't happen with avi's or mp4's.
So, there must be something wrong with one of windows updates that creates this windows FREEZE.
Also there is no possibility to find out what error it is in "Event Viewer" as nothing gets recorded there. Anyone could
advise?
Thanks -
I have recently attempted to download the Afrikaans Language Pack 4.0. After restarting Firefox the application doesn't function and does not appear on the Add-ons manager. The previous version of the Afrikaans dictionary worked well with Firefox 3.0.
Do you have any solution for this problem?Exit Code: 6, Exit Code: 7 Installation Errors -
http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Troubleshoot with install logs | CS5, CS5.5, CS6 -
http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html
for information on how to review your installation logs -
Hello,
I was able to get the service pack onto my computer and the folders are available when I click on the folder with the executable file I continue to click on a number of folders (package, langs, de, setup). When I get there and try to run it I get an error message saying:
An error occured while parsing installer setup file and then gives the file path it also then says OR the file could not be located.
Am i storing the file in the wrong place?Don't think you have to put the Fixpack files any place special. Are you sure you have the Fixpack for the Xcelsius version you have installed on your PC? There are a few different Xcelsius offerings and the Fixpack must be from the corrresponding flavor.
-
Trouble installing Jam Pack #1 (the original)?
Also posted in Logic but it also makes sense to post here unless there are rules against cross-posting.
Recently doing a migration from a PPC to a Mac Pro.
Anyway, I was trying to reinstall Jam Pack 1 (the original Jam Pack) to use with Logic Pro. I was also planning on using it in Garageband.
When I tried to install, I kept getting the error "Installation cannot continue until the GarageBand application is installed." But it was installed.
Did a bit of digging. Found this:
http://discussions.apple.com/thread.jspa?messageID=1989594�
Which led me to examine my directory structure in the Applications Folder. Turns out I had moved Garageband into a subfolder and the installer wasn't able to find it. I just moved it back to its normal spot and the installer was happy.
I hope this helps someone else.also applies to the 1.01 update found here:
http://www.apple.com/support/downloads/garagebandjampack.html -
Trouble with 12.2 Srvc Pack Update
Hi,
I have 12.1.0.892 and installed the CrystalReports 12.2 update. It appeared to finish successfully. However, when I open Crystal to verify it's version #, the version is still 12.1.0.892.
I also can not install any of the the Srvc Pack 2 Hot Fixes (Error: "Crystal reports 2008 SP1 FP 2.1 Update can not install because the version of the product on the system is too low.").
When I go to Programs and Features, I have the followin installed:
- Crystal Reports 2008 Runtime SP2
- Crystal Reports 2008 SP1
as a side note, for other reasons I can't just go with a 12.3 full build install. This version's runtime conflicts with our back office apps.
So, I'm not sure what I'm doing wrong or need to do to get Srvc pack 2 to work correctly?
Thanks for your help.
JohnDepends, where did you download the Fix Pack from and what is the name of it? Could be you are applying a BOE fix pack from Service Market Place or if you have runtime installed for that other program the installer may be seeing it and determining the version it is using is higher so the FP won't over write that version.
Search Microsoft's site on how to enable MSIEXEC logging. then run the FP again and see if the logs indicate what CR is finding.
Also, CR and applications use the same shared folders, so you may have been using a set of updated dll's.
I suggest you contact the makers of that program and ask them for help to upgrade. If may be what you are doing is going to break their app. They should be able to test it for you.
Is there a specific reason you need to get to SP 2 and that fix pack?
Don -
Trouble Redeeming iTunes Gift Card from Multi Pack
I purchased a 3 pack of $10 gift cards. 2 of 3 redeemed. 3rd said invalid. Contacted Support under the redemption section. They responded. Wanted copies of card front and back, reciept, etc. I provided all in a PDF over a week ago. I've been playing tag with an email representative. Last email was on Wednesday, 1/19/2011 saying it had all been forwarded to the redemption people and they would send me an email. 5 days later, no response. I've asked for an update. No response. Who do you contact when CS won't respond?
The website you provided is the website I used to contact CS. They haven't responded since I provided copies of the card, package and reciept. It has been 5 days since their last response and the card still doesn't work.
-
Trouble packing fonts in InDesign CC
Hi, is anyone else having trouble packaging fonts in InDesign CC, from a windows 8 machine?
Best I can suggest is trash the prefs. See Replace Your Preferences
-
Trouble Installing the new Oracle BPM 11g Feature Pack (FP4)
I'm trying to install the new feature pack that just came out on and I'm curious if anyone has successfully installed it on a Windows 64 bit machine.
Although the blog post by Jan Kettenis (http://kettenisblogs.blogspot.com/2011/09/tips-for-installing-oracle-bpm-suite.html) was helpful, when I get to the step to run %ORACLE_HOME%/OPatch/opatch napply from the command line, I get the error shown below.
java.lang.NumberFormatException: null
at java.lang.Integer.parseInt(Integer.java:417)
at java.lang.Integer.parseInt(Integer.java:499)
at oracle.sysman.oii.oiii.OiiiCompsXMLHandler.createCompIdOhPair(OiiiCom
psXMLHandler.java:453)
at oracle.sysman.oii.oiii.OiiiCompsXMLHandler.access$500(OiiiCompsXMLHan
dler.java:96)
at oracle.sysman.oii.oiii.OiiiCompsXMLHandler$OiiiDepElementHandler.onSt
art(OiiiCompsXMLHandler.java:1599)
at oracle.sysman.oix.oixs.OixsElementHandler.startElement(OixsElementHan
dler.java:140)
at oracle.sysman.oix.oixs.OixsDefaultHandler.startElement(OixsDefaultHan
dler.java:109)
at oracle.xml.parser.v2.XMLContentHandler.startElement(XMLContentHandler
.java:181)
at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingPa
rser.java:1284)
at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidati
ngParser.java:326)
at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingP
arser.java:294)
at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:209)
at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readComps(OiiiInstallXMLR
eader.java:321)
at oracle.sysman.oii.oiii.OiiiInstallXMLReader.readComps(OiiiInstallXMLR
eader.java:229)
at oracle.sysman.oii.oiii.OiiiInstallInventory.getCompOHListElement(Oiii
InstallInventory.java:2231)
at oracle.sysman.oii.oiii.OiiiAreaInventory.getAllCompsVect(OiiiAreaInve
ntory.java:1057)
at oracle.opatch.OUIInstallInventory.getAllCompsVect(OUIInstallInventory
.java:157)
at oracle.opatch.OracleHomeInventory.load(OracleHomeInventory.java:2549)
at oracle.opatch.UtilSession.getGenericInventory(UtilSession.java:125)
at oracle.opatch.UtilSession.process(UtilSession.java:235)
at oracle.opatch.OPatchSession.main(OPatchSession.java:2074)
at oracle.opatch.OPatch.main(OPatch.java:651)
Verifying environment and performing prerequisite checks...
UtilSession failed: Patch 12319055 requires component(s) that are not installed
in OracleHome. These not-installed components are oracle.sysman.plugin.ai.main.oms:11.1.1.5.0,
Log file location: C:\Middleware\SOASuite11gR1PS4\oracle_common\cfgtoollogs\opat
ch\opatch2011-09-23_23-34-16PM.log
OPatch failed with error code = 73The issue was resolved by following steps (by performing a fresh install):
1. Open cmd with administrative privileges (Run as administrator) & Install wls1035_generic.jar
2. Execute setup.exe of SOA with administrative privileges (Run as administrator)
3. Apply the PS4FP
The issue was because I was installing Jdev in the same Oracle home “C:\Oracle\Middleware” after step 2 before applying the PS4FP. This corrupted the oracle_common inventory
A quick way to verify whether your inventory is corrupted is to check the following files:
• C:\Oracle\Middleware\oracle_common\inventory\ContentsXML\comps.xml (should be more than approx 2500 lines before patching)
• C:\Oracle\Middleware\Oracle_SOA1\inventory\ContentsXML\comps.xml (should be more than approx 1600 lines before patching)
HTH -
Troubles With Jam Pack WORLD MUSIC
When I try to install it, it starts fine but half way through the installation an error pops up saying
THERE WERE ERROR INSTALLING THE SOFTWARE
Please try installation again
I've tried 50 times and even copied the file to my HD and tried to install it again and it says the same
so i'm wondering if there is another way to make this work do i have to return this crappy DVD
stashYou may have a problem with your DVD. There may be a corrupt spot on it. My DVD installed no problem.
Mind you, considering that the installer copied to your hard drive without coughing up an error, you may want to try the usual Mac voodoo (repairing permissions, check disk integrity, etc) before trying another DVD.
Has your drive been able to read dual layer DVD's okay?
jord
Maybe you are looking for
-
Brand new Mac Pro, 2 thunderbolt monitors; I get a small black puzzle looking piece on the lower right side of my 1st thunderbolt monitor when I boot up. It goes away once the computer fully boots, it is only on there for a second or so. Does anyon
-
Time_out dump error in RSTXSCRP while Importing SAP Script
Hi Experts, I am using RSTXSCRP program for Download and Upload the SAP Form. I am downloading script 'ZF110_HDFC_CHCK' is successfully. after that before uploading i open the notepad i replace 'ZF110_HDFC_CHCK' to 'ZF110_HDFC_DM'. then in selecti
-
Hi, I've been looking all over to use the custom rounded corner with the TABBED PANEL. I've tried many techiques and still unsucessful. BUT recently, I've figured it out how to easily achieve the ROUNDED TABS in the Tabbed Panels. I hope this will he
-
Help Needed with wlst distributeApplication and deploy weblogic 10x
Looking for help on missing steps... Trying to distribute an application .war from one host (adminServer host) to all cluster members. I first distribute the app which appears to work: PackagePath = '/opt/wls/domain1/deploy/app1.war clusterName= 'Som
-
How to color overlay on non-transparent pixels only?
So I need help to make a layer that is a solid color that overlays over everything underneath it but only applies to non-transparent pixels. Is there any way to do this?