A particular form hangs while saving in Oracle Apps 11.5.10.2

Hi Friends,
I am using Oracle Apps 11.5.10.2 on Linux.
In a custom Responsibilty ,In a particular form after entering the valuses when i give confirm button the application forms hangs for a long time without saving the values.
Please let me know the Fix.
Regards,
Arun

Hi,
Was this working before? If yes, any changes have been done recently?
Can you find any errors in the Jinitiator Console Window, application log files, and the database log files?
Please verify that you have no invalid objects in the database. Also, try to generate the form via adadmin and see if this helps.
In none of the above helps, please obtain FRD file, and see if more details about the error are reported in the log then -- See (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i) for details.
Regards,
Hussein

Similar Messages

Changing adobe forms name while saving

hi,
i have made an application in which i am generating pdf form but while saving a default name 'f' is appearing which i need to change. I am unable to change pdf form name.
Plz help.
thanks

I have no solution for you but this forum is related to FPM discussions. i am not sure you posted in a right forum.
requesting moderator to (re)place this to right forum.

Universe Designer Hangs while saving

Hi Experts,
Universe Designer hangs while saving a universe design.
Earlier it was working correctly and suddenly I am facing this issue. I restarted my system couple of times and there was no luck. The designer application works as expected and only problem is it hangs while saving.
In eventviewer, I have following message
Event Type: Error
Event Source: Application Hang
Event Category: (101)
Event ID: 1002
Date: 12/27/2010
Time: 3:23:07 PM
User: N/A
Computer: CHANGED
Description:
Hanging application designer.exe, version 12.1.0.882, hang module hungapp, version 0.0.0.0, hang address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
What could be the cause and how to solve this? Any clues appreciated.
Regards
B Ravi Shankar

This happening for all universes. I face this issue even when I import a Universe from CMS and save.
Finally this problem got solved by restarting couple of times. My guess is that it could be due to no of concurrent connections exceeding(Using EDGE 3.1 in 5 CAL evaluation). When I brought down to session count to 2, it is working.
Thanks for quick reply.
With Regards
B Ravi Shankar

Is a Form locked while saving is in progress?

Hi,
Is there a way to advice a user to not switch to another page while a form is saving? Or can I create a pop up form to appear while saving is in progress?
I have observed that while a form is being saved, while the user switched the form to another page, the progress of saving the first page is locked causing the server to not respond anymore, CPU usage reached the maximum available resource.
How can we avoid such?
Thanks.
Edited by: Nozume on Aug 17, 2010 2:36 PM

You could certainly look into using a simple piece of custom javascript that will display an alert message once a form has been saved.
First place to start is :- http://download.oracle.com/docs/cd/E12825_01/epm.111/hp_admin/apa.html
Cheers
John
http://john-goodwin.blogspot.com/

Unknown Form Type while saving

I am working on Devloper 2000 and developed a form for transfering data from SAP server to SQL server. The form is working fine.But I have one problem that while saving the form as <form name>.fmb it is saved as devloper form of unknown type and give no error message.The standard icon of fmb file of saved form also does not exists but has icon which is not known by the PC.And while opening that form again after saving it asks for the software option with which it has to be opened.
Pls advice what to do..

oh no. That's such an old version. Try install a forms 6i and open/save the forms there - only for testing the save-functionality

Forms Hang on saving a record.

Dear All Experts,
We have OAS 10g 10.1.2.0.2 and Orcle DB 9i on seprated win server 2003.
A couple of users suddenly face a Forms Hang problem while they try to save the record. it's not occuring on all time but when it occurs they have to re-login.
On the login again it works filne.
Would you please guide us to resolve this problem.
Thanks & Regards
Eidy

Thats a little complicated.
In general there are two possibilities to do:
1. Replace the ""standard" DML-operations of forms by your own operations. This is done by using the ON-INSERT, ON-UPDATE and ON-DELETE-triggers in forms, so its a client-side operation.
2. Base the block on a view instead of a table, let forms do its standard DML-operations and do your own operations on INSTEAD-OF-triggers on the view, this is the server-side operation.
Personally, i prefer the second option, for it keeps the business-logic in the database and the client-side "thin".
Implementing the first method:
Forms marks as record for the next DML when you change any relevant item. A relevant item in this sense is one of the basetable-items, or a non-databaseitem, which in turn changes a databaseitem. You can also set the property "Lock Record" on a non-database-item to "Yes" (thats what you have to do). If a record is marked that way, forms automatically tries to lock the record. So you would also have to create an ON-LOCK-trigger on the block and do your own lock in it. And last, put your DML-operations inside the ON-UPDATE, ON-INSERT and ON-DELETE-triggers

Window form hang while looping

I created a window form, while doing a while loop, the window hang while processing. It will revert back to normal state after it finished processing. How do I prevent my windowm form to hang while processing??? Also I do not understand why it will hang while doing a while loop???

Hello everybody, would you mind if you telling how to design tool menu as MAC OSx.

Form hangs while calling Report

Hi, I am converting some Forms/reports from 6i to 10g.
The form I am testing is calling a report repeatedly using the following code:
rep_id := Find_Report_Object('FILE_RECORD_DESCRIPTION');
<<open_files>>
OPEN files;
<<get_next_file>>
FETCH files INTO file_name;
IF files%NOTFOUND
     THEN
     CLOSE files;
     RETURN;
END IF;
:FILE_RECORD_DESC_STATUS := 'Doing file' || file_name;
SYNCHRONIZE;
IF :TYPE = 'PDF'
     THEN
     SET_REPORT_OBJECT_PROPERTY (rep_id,REPORT_DESNAME,'C:\DOC\PDF\' || file_name || '.pdf');
     SET_REPORT_OBJECT_PROPERTY (rep_id,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY (rep_id,REPORT_OTHER, 'P05_FILES="' || file_name || '"');
END IF;
IF :TYPE = 'HTML'
     THEN
     SET_REPORT_OBJECT_PROPERTY (rep_id,REPORT_DESNAME,'C:\DOC\' || file_name || '.htm');
     SET_REPORT_OBJECT_PROPERTY (rep_id,REPORT_DESFORMAT,'HTML');
SET_REPORT_OBJECT_PROPERTY (rep_id,REPORT_OTHER, 'P05_FILES="' || file_name || '"');
END IF;
report := Run_Report_Object(rep_id);
GOTO get_next_file;
When REPORT_DESFORMAT is set to HTML, everything works well. Around 40 .htm documents are created on C:\DOC. But when REPORT_DESFORMAT is set to PDF the form hang after creating 10 or 11 .pdf documents!!!
Any idea what I am doing wrong? Do I have to free up some sort of buffer/memory/other things when creating .pdf document?
Regards
Yves

I tried different things and it seams that the amount of data (i.e the size of the .pdf) determine how many times the report can be called before the form hangs. Form did hang after only 2 call for big report (around 20 pages each) but hangs after several calls for smaller ones???
Yves

OFT- Problem while Playback in Oracle Apps 11i

hi,
As earlier Oracle E-biz Application are not working in OFT8.5 but now in the latest version OFT9.0 as per the information it will work fine.
But i'm facing the problem while playback the Oracle E-biz Application.
I have recorded Order Management Process in Oracle Apps11i. At the time of recording its work fine.
Steps which i had done
1) Login into the application
2) Click on the Responsibility Order Management--> Sales Order
3) It opens the external Applet window
4) Open the Sales Order Form where i enter the Customer Name and add the line item for the customer and then book the order
Stop the Recording and then playback the script
It works perfectly fine till step3 but on Step4 what ever the action user had done on Sales Order Form it is not playing back that action and just close the form and generate the Pass Result.
So i want to know why it is not playback the action which user had done on the form.
I really appreciate if any one can give the solution to the problem

Thiru,
Which concurrent manager consumes the CPU usage? Are you able to identify it?
Any errors in the CM log file? Did you try to start the CM with diag=y and see if any errors are reported in the log files?
What happen to the CPU usage when you stop the CM?
I assume that you are running Purge Concurrent Manager/Requests on regular basis, so this should not be an issue here.
Please review the following notes, and see if it helps.
Note: 114380.1 - Concurrent Manager Processes Taking Lots of CPU
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=114380.1
Note: 264752.1 - FNDLIBR Consuming Memory Causing CPU Utilization To Increase Daily
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=264752.1
System is Live since 2006 and the issue started only today.I assume no changes have been done recently, correct?
Regards,
Hussein

Migrating a Forms 6i custom application to Oracle Apps R12 custom bolt on

Hi,
I need to migrate an oracle forms custom application built in 6i to sit within oracle apps R12 (Forms 10g) and use Oracle Apps user authentication and session. It could become a custom bolt on to Oracle Apps and might be accessed from a custom responsibility in oracle applications.
a) How easy/difficult is this?
b) What are the challenges or things to look for to do this migration?
Thanks,
Ayyappa

979379 wrote:
Hi,
We have two node architecture for R12.1.1 on windows 2008 32 Bit. One node for Database and the other node for application.
As we are facing a lot of memory issues, we are planning to go for 64 Bit.
I Have already read the document
Migrating Oracle E-Business Suite R12 to Microsoft Windows Server 2008 R2 [ID 1188535.1]
The doc says in place OS upgrades are not supported....
So my question is...
While keeping the production, how can i migrate using the same servers. Coz my company does not want to buy new servers..
Please suggest.Complete all the steps in the doc for Rapid Clone and other steps, then take a backup of the files after you run preclone and create a trace file for the database. Once you have the backup ready, install a 64-bit version of the OS and install 11gR2 software and restore the files from the backup and complete the migration.
Thanks,
Hussein

URGENT!Stuck while installing the Oracle apps 11.5.8 on Windows 2000 Server

Hi All,
I am installing the Oracle applications 11.5.8 on windows server 2000 using the rapid install 11.5.8.11(which was part of the cd pack).
I am using the Windows CD Pack(which consists of 19 cds)
To start with, it has passed all the pre install checks(including the utlity check, system check etc), every thing was succesful and then I started the installation.
And then I started installing, I inserted 1 cd at a time. Every thing went smoothly until the 5 cd. While processing the 5th CD, it started spawning the dos session and was trying to connect to the created database. And it was not able to do so.
I could see from the status bar that it was trying to run the scripts like adlicnse.sql, adclobtmp.sql ,adclobconv.sql
and throwing the following message
ora-01089: immediate shutdown in progress
and was asking me to enter the user name . When I entered the username and password, it throws the message saying that
"ora-01089: immediate shutdown in progress".
After such unsuccesful attempts for each of the above mentioned file, I finally go the "Oracle Applications Rapid Install Wizard Alert"
displaying the below message.
Error code received when running external process.
Check log file for details.
Running Database Install Driver for PROD instance.
and then with the "Retry" and "Abort" buttons. When I pressed the retry button,still get the same message. (And I did not find any log file to look for).
Please let us know what are we supposed to do now and what is the exact reason why it is not able to connect to the database.
I have not tampered with any of the files. This is a urgent requirement for us to install the oracle apps, please help us immediately and any help is widely appreciated.
Thanks.

your problem is not very unusual... I also faced the similar situation cpl of times when Oracle was not able to continue the installation coz the Immediate Shutdown was failed. Actually During the installation, Oracle mounts/opens the database and shuts it down many times and few times, Oracle is unable to shutdown cleanly as some process is hanging or not responding.
Piece of advise is that always use staging area to install Apps as it takes long time on Win2K (anything between 4-12 hrs) to install it and CDROM Access is lot slower than HDD. Also, it will prompt u every time to insert tbe CD. All this hassle can be bypassed by using the staging area. Read the Installation help document on how to create it.
For failure reasons, look in ur installation log file which is created in the default Temp folder usually C:\documents and settings\USERNAME\local settings\temp for WinXP or C:\winnt\documents and settings\USERNAME\local settings\temp for Win2K.
post or email me at [email protected] or [email protected] for further help/details.

Custom D2k form not displayed correctly in Oracle Apps 12.1.1

Hi,
I have created a custom form for Oracle Apps 12.1.1 using Oracle Forms 10g. This form was registered on DEV instance and it was working fine there. Recently the DEV instance is refreshed by cloning CRP2 instance. I used FNDLOAD to download the settings for my custom menu, function and form settings into LDT files. Also copied custom form FMB file.
I uploaded my setting for menu, function and form from LDT files using FNDLOAD on the DEV1 instance (refreshed DEV) and copied FMB file to custom top location and regenerated the FMX using frmcmp_batch command. The FMX is created successfully.
Now when i am opening this form, the form appears but the controls/items on the form are not appearing correctly.
I tested the same form on an another instance TST (cloned vision instance) using the same process i did on DEV1 instance then there it is displaying correctly but not on DEV1.
Can anybody help..
Thanks
Farrukh

Farrukh,
This forum is for general Oracle Forms questions. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Calling APEX form with dynamic parameters from Oracle Apps 11.5.8

I have successfully managed to setup access to APEX forms from Oracle Apps 11.5.8 menus utilising Form Functions passing a number of hardcoded parameter values as outlined in the document, http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf.
I am now trying to ZOOM from an Oracle Form passing values of form items (dynamic parameters) to an APEX form. I have so far not been able to do this.
I've also tried using;
web.show_document('http://derep.obup.co.uk:4657/pls/apex/f?p=100:1::::::p1_cust_account_id:'||name_in('ast_cu_act.account_id')||':', '_TOP');
but this prompts for a username/password again as this bypasses the APEX Launch process that is defined in my Form Function.
Is this possible in the parameters section of Form Functions? or elsewhere.
Regards,
Naeem

Hi Daan
We do havea couple of customers doing this, they have taken two approaches:
1. Install XMLP on a separate server entirely - kick off conc request to extract data and then use Java Messaging Service (JMS) to push the resulting XML to the external server where they are using AQ to set up jobs for the XMLP server to work through, generating and delivering the final documents.
2. Set XMLP up as a virtual printer - here the conc request again generates XML but this time the result is directed to a virtual printer namely XMLP. There is a perl or similar wrapper that gets called as the printer and accepts the data, template, output format and delivery destination as parameters.
Apologies for the 10,000 feet overview, hope it helps. Tim

Changes in webservices while migrating from Oracle App Server to WebLogic

Dear All,
I am developing webservices for a external users.
I am new to webservices.
We were using Oracle Application server to deploy the webservices.
The architecture was as mentioned below
1) A interface class
2) A Implementation class for the above interface class
Now we are planning to migrate from Oracle application server to Weblogic Application server.
I have few doubts about the migration,
1) Will there be any difference between Oracle specific WSDL and WSDL created by Weblogic ant build command
2) As our external parties are referring our SOAP requests ans responses for their implementation, i am concerned about the changes in the SOAP request and response formats. Will there be changes due to application server change?
Oracle app server - Oracle 10g application server version 9.0.4.0
Weblogic appl server - Weblogic application server version 10.3.0.0

Now after creating the WSDL by Weblogic workshop. The previous request XML is not working.
Can someone help soving the below query.
We are in process of upgrading the Oracle 10g application server version 9.0.4.0 to Weblogic application server version 10.3.0.0. In the old application server we were using axis specific jars to create the WSDL for the webservices. There are so many third party applications which are accessing our webservices, so we can not change the wsdl, clients accessiong the webservices and the corresponding formats of request and response xml messages. So we need to deploy the same wsdl and for the same we need to deploy axis on to weblogic 10.3. Can you please help us regarding the same.
Qns
1 - If we can deploy the axis on to the Weblogic 10.3
2 - Can we use the same WSDL in the Weblogic server too.
3 - If we use the same WSDL, will it help us to keep the client accessing the webservices, the request xml format, response XML format the same as it is with Oracle 10g application server case.
4 - Please share how to deploy axis on to the Weblogic 10.3 application server.
5 - Please share how we can create EARs that can be deployed on the webserver using axis specific jars.
Thanks and Regards
Manoj

Form hanged on saving(urgent!)

Hello,
in forms after executing a particular record, i am modifying it.. at the same time, some other user is also inserting/modifying other record from different machine. The problem is, when the user from diff machine is saving the record, his form gets hanged, untill i save my record.
Thanks
abhishek

You have two methods of saving data into the db. Locking-Mode Immediate and Delayed.
It's a block-property. Try the other one. You may have the false one for your environment.
Gerd

A particular form hangs while saving in Oracle Apps 11.5.10.2

Similar Messages

Maybe you are looking for